Sony VAIO VGN nr475n Processor upgrade

I want to speed up my vgn nr475n. I considered a processor and RAM upgrade so can you tell me which is the maximum GHz for my model and the best ram upgrade?

So the market specs say the followinghttps://docs.sony.com/release/SPECS/VGNNR475NS_mksp.pdf Memory upgradeable to 4GB (also the chipset documentation states the max memory to be 4GB)
Sometimes you can go beyond the memory specification because the manufacturer BIOS allows it and the hardware to go beyond 4GB to 8GB DOES existhttp://www.crucial.com/ProductDisplay?urlRequestType=Base&catalogId=10151&categoryId=&productId=10979&urlLangId=-1&langId=-1&top_category=&parent_category_rn=&storeId=10151 Processor is the Intel® Core™2 Duo Processor T5670 (2M Cache, 1.80 GHz, 800 MHz FSB)http://ark.intel.com/products/35163/Intel-Core2-Duo-Processor-T5670-2M-Cache-1_80-GHz-800-MHz-FSB Chipset is the Intel® GM965 Express Chipsethttp://ark.intel.com/products/29821#@specifications In the case of your VGN-NR475N, the Core2 Duo T5670 doesn't show a compatible products section which usually displays the list of compatible chipsets which in turn shows compatible processors. Looking at the Intel GM965 Express chipset specifications shows compatible processors and the fastest listed that has the same 800 MHz FSB like the currently installed T5670 is the Intel® Core™2 Duo Processor T9500 (6M Cache, 2.60 GHz, 800 MHz FSB). Supposedly the Intel GM965 also supports Extreme processors, but becareful the liklihood of compatibility on those processors are lower. Please note all of this information is speculative, but it's based off of existing documentation, there is a reasonable amount of certainty that the upgrades will work. It's all experimentation in the end. Lastly, upgrade to an SSD. That's the biggest bump in terms of performance although going to a Core 2 Duo T9500 will be noticiable. Use CPUID CPU-Z to confirm the specs on your laptophttp://www.cpuid.com/softwares/cpu-z.html Good luck! 

Similar Messages

  • Sony VAIO (VGN-NW130D) - Will Sony provided Windows 10 drivers for this model?

    Hello Sony, I have a Sony VAIO (VGN-NW130D). I purchased it new in 2009. It had Windows Vista preinstalled and a bought a Windows 7 disc for my computer. Here are my questions: http://community.sony.com/t5/VAIO-Windows-10/Windows-10-upgrade-Information/m-p/513320#U513320In the above link PeterT mentions the models that Sony will provide Windows 10 drivers for. Will these be the only models Sony will provided drivers for? http://esupport.sony.com/CA/p/os10upgrade.plIn the above link Sony says it will provide drivers for models that had Windows 7 and 8 preinstalled. What if you bought a Windows 7 disc? I have tried to install Windows 10 by forcing it to do so by command prompt, and by Installing it from Microsoft's website. Both tries where unsuccessful. It would get stuck on the black upgrading screen at 32% overall and 6% installing windows features and drivers. I reserved my copy of Windows 10 and my computer meets Windows 10 requirements. If my computer meets Microsoft's requirements my PC manufacturer should provide the Windows 10 drivers. If Sony choose not to provided Windows 10 drivers for all their PC that are compatible with Windows 10, it will be really off putting and resulting in me never purchasing another Sony PC. It tarnishes a company's reputation when they do unfair things like this. This would just not be fair Sony. Sincerely,Concerned Sony customer (thinking of switching to a Mac after this horrible experience)

    Light wrote:
    Hello, Thanks for the replay. How do you know what vendors our computers need drivers from? Do you know if Microsoft might provide us with drivers? Been reading some of the other posts and found out that Sony has sold the VAIO brand. I will never be buying another Sony computer or other Sony products again. This is just bad customer service.Sony has said that we will have to get drivers from Microsoft.  Or we will have to use the drivers that come with Win 10.  You have to read other topics in this forum to find this. I have two VAIO's that aren't on the Sony supported list and one VAIO that IS on the supported list. I have to wait until Sony proivides the drivers for my supported VAIO. I will have to wait until Microsoft provides drivers for my other VAIO's. I have a fourth desktop generic PC that I have upgraded from XP to Win 7.  I tried to install Win 10 on it but the Win 10 video driver only supported VGA for my legacy video board.  I rolled Win 10 back to Win 7 and I will wait until I can get a Win 10 driver for my video card.  If I can't get one, I will have to replace the video board with something that has Win 10 drivers. I won't have that option for my VAIO's because I can't replace the video boards.  If Microsoft or GeForce don't provide a driver for my video boards, I will not install Win 10.  I don't like it as much as Win 7, from what I've seen so far.

  • Sony VAIO VGN-FW11E - can't set brightness

    Hello everyone!
    I have really annoying problem with my laptop - setting brightness just don't work. I have tested many others distributions and this work only under Ubuntu 9.10 beta. I think that is connected with this. How can I use this patch  in arch?
    Laptop: Sony VAIO VGN-FW11E
    Graphic card: ATI Radeon HD3470
    I'm sorry for my english but people in polish forum just can't help me ;p

    oskar.einstein wrote:
    @B I'm not able to make so specific changes like you said. I can build something from AUR, sometimes also make some changes to PKBUILD's but doing something with dsdt is to hard for me.
    @litemotiv
    Do you think I shoud compile new kernel with new sony-laptop module inside?
    hmm, i'm not certain that will fix it for you..
    do you already have a fixed dsdt for your laptop? if you do, the best way is to compile a kernel with these lines added to the kernel config file:
    CONFIG_STANDALONE=n
    CONFIG_ACPI_CUSTOM_DSDT=y
    CONFIG_ACPI_CUSTOM_DSDT_FILE="DSDT.hex"
    that will definitely fix the brightness issue. the sony-laptop module is built by default, so you don't have to compile that specifically (the module is needed to get the function-keys on your keyboard working, it shouldn't have any influence on the brightness itself).
    if you don't have a custom dsdt yet, you need to make one following the instructions on the vaiobuntu blog. it's a bit daunting at first, but i assure you that it's doable.
    Last edited by litemotiv (2009-10-26 21:11:30)

  • M4 SSD 256GB 2.5 inch sometimes not booting on Sony Vaio VGN-FZ11E

    I installed a Crucial m4 SSD 256GB 2.5 inch on the Sony Vaio laptop VGN FZ11E using the kit provided. The operating system used is Windows Vista. The drive worked great the first time I booted the laptop, but since the second booting the system sometime stops while booting and I have to force the computer to restart till at some points it works (which can be after 1, 2, 3, 4 or even more attempts). The computer starts and the drive works for the first 10 seconds or so, then when the WLAN light of the laptop comes up, it stops working (no hard disk light). I have installed the last firmware, checked the drivers and made sure that the m4 drive is recognised and prioritized in the BIOS (this is the only drive installed, and it has a partition which is hidden). I have done a Power Cycle as recomended on the Crucial website, but this did not solve the problem. Any suggestions?

    Hi, I have the same issue you are describing, with "Operating system not found", not the one laurentzo says. My VAIO VGN-FE11H with BIOS R0174J3 gets stuck at this point, and that happens many times with this version of BIOS. With version R0074J3 also happened, but I have the perception that it was less usual. Anyway, I tried to upgrade my BIOS because the failure is unacceptable, and 8 of 10 times I can´t boot my laptop because the disk is not recognised, despite the fact that when it boots, everything works perferctly. My BX100 250GB firmware is MU02, and my situation is quite desperating, because the workaround that you suggest isn't working.Would you please update this firmware, or would you know any BIOS parameter that could make it boot at least half of the times??P.S.: I have also tried enabling AHCI on BIOS, etc.

  • Sony Vaio VGN-N27LH - some questions SOLVED

    SOLVED - I installed the sony_acpi module from AUR and run the following to dim:
    echo "4" > /proc/acpi/sony/brightness
    Would still be grateful if anyone could advise on what else I need to consider when running linux on a laptop.  My original questions/post is below.
    So I took the plunge and bought my first latop.
    However, running linux is significantly more difficult and I'm feeling somewhat swamped.  On my desktop I just installed Arch and it ran fine.  With the laptop there are issues of power management, speed-stepping,suspend to disk, ACPI, etc, which are all new terms for me.  As I say, on the desktop I just installed Arch and it ran fine.  Nothing else to worry about.
    Let's start at the beginning.  I installed the beta version as I couldn't get an internet connection with my older version.  Having done some reading I've installed a few things and added some daemons but am still struggling to lower the brightness of the laptop.
    Below are some details:
    [darrendowlut@MyBoX Linux Stuff]$ lspci
    00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub (rev 03)
    00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)
    00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)
    00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
    00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
    00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
    00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
    00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 02)
    00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 02)
    00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 02)
    00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
    00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
    00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
    00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller IDE (rev 02)
    00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
    02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8036 PCI-E Fast Ethernet Controller (rev 16)
    06:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
    08:03.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
    08:03.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller
    08:03.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
    # /etc/rc.conf - Main Configuration for Arch Linux
    MODULES=(sky2 ipw3945 sonypi speedstep_centrino cpufreq_powersave cpufreq_conservative cpufreq_powersave cpufreq_stats cpufreq_userspace freq_table)
    DAEMONS=(syslog-ng ipw3945d network cpudyn acpid hal powersaved alsa netfs !crond)
    I'll be honest, I've no idea what half of those modules and daemons do!  I just know they are installed and load fine - there are no errors when the system boots.  What's more, I haven't edited any configuration files so whether those daemons are actually doing anything is anyones guess.
    So, any ideas on how to get the brightness down?  Equally, are there issues that I need to be aware of when running linux on a laptop.  It seems to be running quite hot and I dont know whether this is normal or not?
    Please don't shoot the noob.  Help greatfully received.  Be gentle.
    Thanks.
    Last edited by Ipsofacto (2007-04-09 16:56:39)

    wiki has some info, one of the Vaio pages is written by
    although its quite outdated it might give some hints (laptop-mode-tools for example) and inspire you to writte a new wikipage
    they say kernel 2.6.21 has the vaio brightness control inside him, so I'm waiting for 2.6.22 to see how things work with Vaios
    laptops aren't more difficult than desktops, Vaios are pain in the butt (its the first and the last I'll ever buy )

  • Docking Station for Sony Vaio VGN-Z899GPB also know as PCG6122L

    Can anyone supply the part number for the docking station for a Viao laptop model number above? Thanks,Tony

     
    Hi TonyD,
    Welcome to Sony Community!
    We have limited information regarding the part number of the docking station (parts or accessories) of your unit. You may visit https://sony.encompass.com/ or call them for further assistance. They will be asking for the serial number or service tag number of your unit. They will be able to help you out as well about the parts and accessories of your unit. 
    Hope the link helps. 
    Thanks,
    Vincent 
    If my post answers your question, please mark it as "Accept as Solution"
     

  • HT1349 I have a sony Vaio (VGN-NS190J).  Recently, my I tunes library does not stay in I tunes upon shutting my computer down.  When I start the computer up and open I tunes, I have to have I tunes find all my music files and repopulate? help please

    Can somebody help......regarding the above question..... I have had I tunes on this computer for several years without a problem.  I do use webroot as an antivirus software.  I have Windows Vista operating system and I am using the latest version of Itunes available.  When ever I open Itunes, my music, books, ect, ect. files are always gone and I have to ask Itunes to find them on my computer almost every time I open Itunes.  This problem has been going on now for about the last 6 months.  Nothing else wrong with computer.  Another issue associated:  I can create a playlist one night, and the next day I open  Tune, it's gone.  I would really appreciate any help.  Thank you.

    It can be that the library path, or files, are corrupted. What happens if you set a different path to save the library?

  • [SOLVED]Custom DSDT not loading - OEM battery doesn't work - Sony Vaio

    EDITING ORIGINAL POST TO POST SOLUTION so I don't do a massive bump
    Installed windows and ran the BIOS flasher that came with the battery. Didn't work until I changed a line in the plaintext configuration file (config.ini or something) it comes with. Changed "Capacity: 20" to "Capacity: -10". This changed the battery charge requirement from 20% to negative ten percent (any negative number will do), allowing the program to run and flash the BIOS. Didn't realize I could do that, but it fixed  the problem 100%.
    #### BEGIN ORIGINAL POST: ################################
    Hey guys,
    I'm a bit of a linux noob, but I've spent many hours this week trying to fix this issue on my own and have learned a lot about making custom kernels, hardware stuff, ACPI, and ABS. However, nothing I've done has worked and I've hit a wall. For reference, I'm on a Sony Vaio VGN-FZ4000 with linux-3.0 base kernel, gnome3/gdm. The battery is made in china and doesn't list a manufacturer, just model number BPS8, 52000mAh.
    [Backstory]
    So I recently got an OEM battery to replace the broken original, which hasn't worked since before I installed arch (though it worked with an Arch install I did a couple years ago). When I first plugged it in, the gnome battery symbol popped up listing the battery at 0% with an exclamation icon. I unplugged from AC power and the laptop still ran, but the battery monitor just said it was at 0% and 'Estimating' remaining time. I figured this was a glitch with gnome or just because it was this battery's first cycle so I let it run down until it hard-crashed. Then I plugged back into AC and tried to turn on the computer, but it wouldn't do anything until I removed the battery.
    Looking into the problem I discovered this was due to the ACPI firmware table DSDT being compiled for Windows, which has, shall we say, fewer restrictions on sanity than the Intel ASL compiler used for UNIX systems. Sure enough I extracted /sys/firmware/acpi/tables/DSDT to find that its section about the battery contained the entry 'Zero' for Battery Technology, which translates to "non-rechargeable", rather than 'One', which makes it chargeable. acpitool confirmed this; my system thought the battery was non-rechargeable and was constantly discharging it. Needless to say I've only been putting it in temporarily to test solutions since.
    [/backstory]
    [tl;dr] DSDT firmware contains malformed battery description, now I can't get my system to run with a custom DSDT. [/tl;dr]
    Attempted solutions:
    [1]
    Extract, modify, recompile DSDT and include it with the kernel compilation .config options
    CONIFG_ACPI_CUSTOM_DSDT=y
    CONFIG_ACPI_CUSTOM_DSDT_FILE="/usr/src/custom_dsdt.hex
    CONIFG_STANDALONE=n
    as suggested here, a page linked to by the arch wiki page on DSDT.
    I followed the instructions but no matter what this has generated errors during the kernel compilation, sometimes due to every line containing unexpected \231 (or other numbers) characters, sometimes finding some error in the DSDT file and then claiming that the driver it was compiling (ol.c somewhere in the drivers/acpi section I believe) had references to undefined functions all over the place. I CANNOT compile with a custom DSDT specified.
    [2]
    Place recompiled DSDT in /lib/initcpio/custom.dsdt and add 'dsdt' to the HOOKS in mkinitcpio (and rebuild the initramfs-linux-*.img, of course). Another version of this included recompiling the kernel with CONFIG_STANDALONE disabled.
    In neither of these situations has the running DSDT ever been anything but the BIOS-supplied one and not once has the battery shown any different behavior.
    acpitool and $ cat /proc/acpi/battery/BAT0/info have consistently claimed the information specified in the BIOS-supplied DSDT; the battery is non-rechargeable and is discharging at an unknown rate. Sometimes acpi will even report that the battery has zero capacity.
    The arch wiki does say mkinitcpio doesn't support the dsdt hook as of 2.6.30, but [1] didn't work either and mkinitcpio -H dsdt still told me to try this so I did.
    [3]
    The final solution I have tried has been to do [2] but to recompile the kernel with the legacy support for battery and ac adapter stuff disabled. I tried this because it was suggested in the kernel.log;
    Sep  13 11:51:03 localhost kernel: [   11.740059] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    Sep  13 11:51:03 localhost kernel: [   11.753434] ACPI: AC Adapter [ADP1] (on-line)
    The corresponding line now reads
    ACPI: AC Adapter [ADP1] (on-line)
    (The same goes for the battery BAT0)
    but all this does is remove the battery/ and adp1/ folders from /proc/acpi/ and break acpitool functionality. The log still doesn't mention the dsdt hook, either.
    [4]
    The old way to do this was to use the acpi-dsdt-initrd-patch-* patch, but that hasn't been updated for modern kernels, presumably because of the new "functionality" from mkiniticpio. The current kernel .config doesn't include any options for ACPI initrd/initramfs support or reading a DSDT from initramfs, which is the functionality provided by this patch.
    This covers all the methods I've been able to find on the internet and I'm at a loss for what to do. Am I doing something wrong in [1]? Under what conditions will the compiler fail/succeed with a CONFIG_ACPI_CUSTOM_DSDT_FILE?
    When I recompile I fix the 'Zero' definition and a couple compiler errors and warnings. The errors come from section length definitions, which read as 0x00000000 rather than the appropriate max-min value so I fix those, and the warnings come from _T_* methods belonging to the compiler, so I refactor the code to remove the initial underscores. The last warning comes from an isolated And statement that's within brackets (compiler complains it doesn't do anything), but if I remove that the compiler fails hard.
    Thanks to anyone who's read this far.  Please let me know if you have any ideas how to get my system to use a customized DSDT.
    Last edited by paraffin (2011-09-29 23:20:30)

    Thanks for the offer, Radioactive man However, I'm actually compiling a customized kernel with the linux-ck and -sony patches, so your packages won't help. (The custom kernel works fine and I've tested this battery behavior on the the regular, -ck, and -sony kernels as well)
    Anyway, so I tried another compile with
    CONFIG_PREVENT_FIRMWARE_BUILD=n in addition to the options listed in [1] and that time it compiled.
    Unfortunately it still didn't load the DSDT!
    I did catch a quick little error message that turned up in kernel.log though;
    /var/log/kernel.log:Sep 15 11:50:24 localhost kernel: [    0.925780] acerhdf: unknown (unsupported) BIOS version Sony Corporation/VGN-FZ4000E/R2110J7, please report, aborting!
    acerhdf is a fan controller module for the Aspire One, and perhaps I left that in the kernel config and it's preventing the custom DSDT from loading, even though the acerhdf module never gets loaded itself, nor is it in my rc.conf or anything else... If that was the cause of all this, I'm gonna be angry...
    Anyway, this message does not appear with my latest kernel build because I took off the custom DSDT option, hoping to be able to use ACPI_CUSTOM_METHOD=y, which supposedly allows one to inject a custom AML method into a debug fs. It wouldn't have worked anyway, as it doesn't let you modify Device sections, but even with a dummy method insertion it didn't give my root modification privileges as it was supposed to...
    Will try recompiling AGAIN with this CONFIG_ACERHDF=n (it's simply 'not set' in my current .config), while also enabling the custom kernel etc. If this doesn't work I have no idea what I'll do.
    Anyway, thanks for your help and time:

  • Recording a movie using a Sony Vaio Motion Eye?

    So I have a Sony Vaio VGN-FZ38M, with an in-built motion eye camera. Whenever I try and use this in Premiere it doesn't work; the device is, apparently online. Is there a fix for this? There is another capture program that came with my laptop which I can use, but I'd rather capture it in Premiere because that's what I'm using to edit it.
    I am using Premiere Elements 4 on Vista Home Premium 32-bit.
    Thanks in advance :)

    your camera may be being used by other Sony utility and therefore PRe wont get the handle. Ask SOny for help.

  • Loading Officejet 7610 software caused Sony Vaio XP to crash

    Hi
    Loaded software for newly bought Officejet 7610 on my Sony Vaio (VGN-BX196VP) XP laptop
    In Programs clicked on Officejet 7610 - there was a warning of a threat from Norton re the file: HPOfficejet7610series\bin\HPsolutionsportal.hta
    But I ignored it - there couldn't be a problem here? - result -black screen with "Operating system not found"
    Many solutions on the web - would be grateful for any advice
    Thanks
    JF

    Hi hp7610,
    Welcome to the HP Forums.
    I see that you are having an issue with installing the printer on to you Windows xp computer.
    Before attempting to reinstall the printer, I suggest that we disable and firewalls or anti virus protection programs that you may have running.
    Here is the link for the HP Officejet 7610 series Full Feature Software and Drivers for Windows xp.
    Save this file to the Desktop and double click the new icon when the download is complete.
    Please feel free to write me back if you have any other questions.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Can i change the processor ? Sony Vaio E Series

    Hello I have a Sony Vaio Model sve1513b1ewIt has a Intel Pentium 2020M Processor Can i be able to change the processor to a i3 or i5 ? 

     
    Hi gasspari,  
    Thank you for considering Sony Community! 
    We do not advise Vaio users to upgrade or modify certain parts of their units, especially the processor. It is still possible but we cannot guarantee that it will work without any issues. Another thing is, your Vaio SVE1513B1EW is not a U.S. model and we have limited information about your computer. 
    For further assistance, or any other concern, we kindly recommend visiting our Sony Global Web site for information on contacting the Sony Support Center in your region at http://www.sony.net/SonyInfo/Support/.
    Hope the link helps. 
    Thanks,
    Vincent 
    If my post answers your question, please mark it as "Accept as Solution"
     

  • How can I get my mail to open and read documents in Firefox after upgrading to Sony Vaio Gatew 2.4.0

    I upgraded my Sony Vaio Gate software to 2.4.0.06210 on Wednesday night. Afterwards, my mail functionality is not working with Firefox. It will work with Internet Explorer, but not with Firefox when I try to do the following such as clicking on check mail, open inbox or trying to open any views or documents.
    It will not open, but only states trying to load and indicates the following:unknown property text flow - declaration dropped and it is referencing my mail server in trying to read data from it. However, if I right click and clikd on a new tab it will read in the data and then if i open a new tab again it will open the document. It's not able to stack the data and hold it properly now for some reason. What do I need to do to get it to work with Firefox? Thanks. edit
    Error: uncaught exception: [Exception... "Component returned failure code: 0x805e0006 [nsIXMLHttpRequest.open]" nsresult: "0x805e0006 (<unknown>)" location: "JS frame :: http://mail.yimg.com/d/combo?/mg/12_0_0/js/yui_utils.js&/mg/12_0_0/js/core.js&bc/bc_2.0.4.js&/mg/12_0_0/js/darla.js&/mg/12_0_0/js/async.js&/ult/ylc_1.9.js&/mg/12_0_0/js/imboot.js&/gx/t12a/js/yui_loader_mg/ba87c64b1f20e3e7898b0dc28b2173a6_1.js&/gx/t12a/js/combo/init/us/5d97332c6924d7b42d469dc77113ac15_1.js&/gx/t12a/js/combo/init/us/ycw.v5b.js :: <TOP_LEVEL> :: line 3" data: no]

    Hi Rick,
    do you mean I could get a direct download link to After Effects 11.0.4? So I don't have to run this patch that never seems to work?
    Hard to believe all the Adobe tech support guys I've spoken to wouldn't have mentioned that, I've spent hours and hours on the phone already....
    I will try!
    thank you

  • Difficulty installing upgrade version Premiere Pro CS3 on Sony Vaio

    I hope someone can help me. I purchased Sony Vaio multi media PC with Premiere standard factory installed. Last year I purchased upgrade premiere pro CS3 and installed it I had shared component error that was resolved with adobe tech support. the program worked flowlessly until recently my hard drive crashed and had to be replaced. Since then when I try to install Premiere Pro upgrade it has locked the program and is asking for serial number factory installed premier standard. The very first time I installed upgrade program originally it never did that . What can I do?

    Contact Adobe.

  • Upgrading Sony Vaio E Series HDD to SSD

    I want to upgrade my Sony Vaio E Series Hard drive to a SSD and was wondering what type of SSD I should get since ive heard that certain ones will not work with this laptop.
    Thanks

    Any SSD should work fine in that notebook. I would reccommend a 256 GB Crucial M4. All you have to do is make recovery discs with the Sony system software, copy all your personal files, favorites, and preferences to a flash drive, have the SSD installed, and then use the recovery discs to rebuild your system. Once you do all that, you just copy your stuff off the flash drive and install all the software updates.

  • Are there any ways to upgrade the graphics card on a sony vaio laptop?

    Solved!
    Go to Solution.

    Pretty much if you have to ask, the answer is no.
    For those laptops that allow it (and "Sony Vaio" isn't specific enough to determine this, an exact model number and current configuration would be needed.), it's usually a difficult and expensive procedure that WILL void your warranty (unlike desktop video card upgrades).
    If it has Intel GMA graphics, 100% are non-upgradeable.
    If it has discrete graphics (ATI or NVidia), there's a slight chance but it's getting more and more rare.  In general, if multiple video card options were offered at purchase time for a system, it is possible to upgrade from the lower options to higher ones at a later date for significant expense.  The exception being systems that offered Intel GMA or other options - the GMA-based systems usually use a different motherboard than the other options (This was the case with the Dell E1705 series.)
    *disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

Maybe you are looking for