Sony VG-10 - Premiere CS6 does NOT seem to like it

Been working with CS6 for a while now and footage from both a Sony NX5U and an AX2000. Absolutely NO issues whatsoever. But I recently got a VG-10 as I had been doing some stuff with my Canon 7D and LOVE the DLSR look. The VG10 footage is gorgeous but I've run into an issue; Premiere does NOT seem to like the m2ts files from the VG10 (NO ISSUES WITH M2TS FROM OTHER CAMERAS). I can edit it for a little while, maybe half hour, then the timeline starts freezing. To be more accurate, the VIDEO freezes. Sound plays fine but the picture lags. Takes a while to refresh. I thought it might be the computer so I tried it on my other edit suite and got the same thing. The only solution I've found is to convert the VG10 footage to MP4 files and then there's no problems but this is a pain in the ***.
Anyone had this issue and found a better solution than converting all the VG10 footage
BTW the computer are both Win7 64 bit, both have 24GB Corsair memory and GeForce GTX260 video cards.

That's a common misconception that one needs to "fix" the clips BEFORE importing to Premiere. Actually does more harm than good for some users.
I rented an AX-2000 a couple weeks ago to shoot 6 dance recitals of 2.5 hours each. To get the clips into the CS6 system, I simply copied the entire contents of each SDHC card to unique folders on my video hard drive, then used MEDIA BROWSER in Premiere CS6 to import. Media Browser simply showed me ONE long clip in the bin and when I moved it to the timeline, again one long seamless clip, no glitches at the "invisible" seams or anything. Nothing could be simpler. Keeps perfect sync with the other camera, which was recorded as ProRes using Ninja 2.
That's the beauty of Media Browser, that it looks at the metadata and knows how to properly handle spanned clips properly behind the scenes, so that you don't have to worry or do extra work. Please try this workflow and see if it fixes the issue.
Thanks
Jeff Pulera
Safe Harbor Computers

Similar Messages

Premiere cs6 does not recognize USB3 intensity shuttle?

I recently purchased Adobe premiere cs6 and a blackmagic intensity shuttle USB3 for windows. I have succesfully captured video from a deck using the media express software but premiere does not see the blackmagic device. Any ideas?

I recently installed the Intensity USB 3.0 on Premiere Pro CS6.0 windows 64 bit on an Intel Motherboard.
The capture device is installed and works fine and captures ok with the blackmagic capture utilities.
When capturing using HDMI 1080i 50 resolution on Premiere it stops after 1-2 secs.
Tried using the Video for windows capture it works fine there too but does not seem to work with Premiere CS6.
Any advise help suggestion

Premiere CS6 does not remember some settings when saving custom export presets.

When I save a custom export preset in the export window, some settings are not remembered, and I need to change them every time again and again! The settings so far I found to not be saved are:
Key frame every ... frames
Limit data rate to ...

Interesting...
When I create and save an a H.264 QT preset
using the Export Settings dialog from within Premiere,
it does not save the key frame interval or max bitrate.
However, when I create a H.264 QT preset from within
Media Encoder and save... the missing settings are saved
and can be recalled from within the Premiere Export Settings dialog.
EDIT:
Re-tested this a bit more, and now the kf interval & max bitrate are
being saved with the presets created in Premiere Export Settings dialog.
Odd... my first 2 tries didn't take?

Premiere cs6 does not see correct images in media browser

Hi Folks,
I'm working on a project in CS6 Premiere (On an iMac with Mavericks running) and I cannot get the Media Browser to correctly see/import the still images (JPGs) I want to use. Instead, it sees all 8 images as the same image, though with different file names. I've reopened Premiere a few times, closed and opened Bridge a few times, renamed the files (Premiere still sees the original file names). Is it a matter of clearing the cache? If so, can someone explain that process?
Thanks for your help!

Thanks Ann,
I tried that but Premiere is still seeing its original view of the images (all thumbnails are the same) - the newly saved image doesn't even show up in the Media Browser.

I am looking for the trial version of Dreamweaver CS6 to download yet it does not seem to be available. Is there a way for me to download this product or has it been taken off of the market?

The trial version for Dreamweaver CS6 does not seem to be available anymore, or am I looking in the wrong location for it?

You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html
Purchase CS6 products:
http://www.adobe.com/products/catalog/cs6._sl_id-contentfilter_sl_catalog_sl_software_sl_c reativesuite6.html

I have a CS6 Disc I purchased. It does not seem to fit correctly in my external hard drive so I can download the software. Is a special kind of external hard drive required. I have a MAC Book Pro Yosemite version.

I recently purchased an Adobe Creative Suite 6 Design & Web Premium software so I could use a more updated version of Photoshop & Illustrator. My new Mac Book Pro does not have an internal hard drive. I was told by Apple to buy an external hard drive to download the software. I bought an LG Ultra Slim Portable DVD Writer compatible for MAC. When I went to put the disc in the drive it does not seem to fit in the tray properly. Is there a special size external drive I need to purchase to do this? Please help if you know the answer. Thank you.

Hi Bluedrake
Please download the CS6 Trials from below link : Download Adobe CS6 Trials: Direct Links (no Assistant or Manager) | ProDesignTools
Follow the instructions to Start your Download ...
Use your Serial Key to Activate them ....

Premiere Pro CS6 does not recognize USB PnP Sound device connected to iMac OSX even when activated in Audio MIDI setup. The iMac(i-7 processor,16 GB) is working with this USB device without any problem

Premiere Pro CS6 does not recognize the USB PnP Sound device in order to produce a commentary sound track. The USB device has been activated on the iMac OSX by using the Audio-MIDI-setup and is working correctly with the iMac. When opening > presets >audio hardware I can only select between >standard >out integrated > digital input integrated >microphone integrated. USB PnP is not indicated at this place.
With the built-in microphone of the iMac I can produce the commentary sound track, but I would prefer a stand alone version for better quality.
Your help is highly appreciated. Thanks in advance, Annemarie!

I'm using a Logitech Webcam Pro 9000 (which has a microphone on the side). I have several other devices plugged into separate USB slots: a keyboard, a mouse, my iPhone, and a Roland keyboard midi controller.
I've considered that maybe the webcam/mic combo is the culprit. If USB doesn't work at a constant speed, that could very well be causing the issue! The sound begins to lag badly sometimes when it's working properly, so that there's a multisecond delay between speaking and hearing my voice repeated back over the mic which is another sign that something is wrong. I've also caught it making a strange electronic sound during its "hang" time once it stops taking sound input correctly.
Maybe I should try to use line-in and forgo USB altogether then. I think I'd need a preamp and some sort of converter for that since the Mac Mini lacks a powered mic jack. I'm only a newbie musician so I've never set up such a system but it might be a better solution in the long run.
I'll check to see if it hangs before or after my computer enters suspend mode, that's a good suggestion too. Thank you for your help!

Capturing from Sony DCR in Premiere Elements 13 not possible?

Premiere Elements does not find the device (SONY DCR-TRV120E PAL), although it is recognized in "Devices and Printers" as "AV/C Subunit / Sony DV Camcorder" (WIN 7) and the device is also recognized and capturing correctly under MS Movie Maker.
Thanks for any helpful advice!
Oliver.

Oliver
Thanks for the reply.
Hope you can use the workarounds suggested in the Adobe document.
Are you within 30 days of purchase from Adobe direct on this one? If so, you can seek a refund/money back from Adobe.
If you purchased from an authorized reseller, then you have to deal with the seller according to the sellers return/refund policy.
If an Adobe online purchase, then Adobe Chat Orders should be able to take care of the refund details.
Contact Customer Care
Premiere Elements
Membership, Account, Payment
Payments, Invoices, Orders
If the link does not hold its set, then you will need to navigate to the Chat Panel using the above titles as guides.
Best wishes
ATR

I recently purchased a Canon 7D. I own Adobe Photoshop/Bridge CS5. I cannot open my raw images in Bridge. I have tried to download the plug in but does not seem to work. Please Help, I need to be able to open my raw images in Bridge ASAP. I do not want to

I recently purchased a Canon 7D. I own Adobe Photoshop/Bridge CS5. I cannot open my raw images in Bridge. I have tried to download the plug in but does not seem to work. Please Help, I need to be able to open my raw images in Bridge ASAP. I do not want to upgrade to CS6 at this time.

If you had given us sensible information, I could look it up for you if your efforts fail.
Right now, I don't even know if you are on a Mac or on a Windows box.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

CS6 does not show on my Adobe account. Has my registration been lost?

CS6 does not show on my Adobe account. Has my registration been lost?

make sure you're using the same adobe id to check your account as the adobe id used to register your software. also, you should have a copy of your serial number(s) secured locally. and, for extra comfort, you should have a copy of your installation files,
Downloads available:
Suites and Programs: CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5 | 4 | 3
Captivate: 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

CS6 does not print

windows7 Epson 2880 printer I can print in Lightroom with no problem. CS6 was printing okay. Now when I try printing it says proceeding , but nothing happens. Cs6 does not crash. Just won 't print. My printer dialog box says error printing then recover file , but when i try again nothing. everything else seems okay. I restarted CS6 and rebooted computer , still no printing. What am Idoing wrong. Is does CS6 haveto be re instalked ?
Thanks , Mike

This sounds more like a problem with the printer itself, or the printer driver.
Reinstalling Photoshop wouldn't have any effect.

Purchased the master suite and premiere pro does not open

purchased the master suite and premiere pro does not open

Mac or Windows, and exactly which version of the operating system... which version of Master Suite (CS5 or CS6 or ???) and what error message do you see?

I have a late 2012 iMac running osx 10.8.5. I keep losing access to my internal hard drive. I can reboot and regain access and it will last for a few minutes or hours. Disk utility does not seems to help.

I have a late 2012 iMac with an I5 precessor running OSX 10.8.5 and a 1tb internal hard drive. I keep losing access to the internal hard drive/startup disk.
I can reboot and everything operates as normal for a few minutes or hours but then I lose all access again to anything on the hard drive. The computer is still up and running but no files can be accessed and certain websites cannot be acessed even though internet access appears to be normal. Disk utility can only find permission errors related to iTunes which can be repaired only to come back at the next scan (I would not think permission errors would have anything to do with the hard drive crashing). It does not seem to matter what program I am using at the time access is lost and it can lose access sometimes right after reboot when no program is running.

You will need to boot into the Recovery Volume (command - R on a restart or hold down the option/alt key during restart and select it) to run Disk Utility/Disk Repair.

HT1384 My ipod nano 3rd generation, when connected by usb, does not show up in itunes, does not show up on my computer, does not seem to charge by the wall charger. It just has a black screen. Any ideas for me?

My ipod nano 3rd generation, when connected by usb, does not show up in itunes, does not show up on my computer, does not seem to charge by the wall charger. It just has a black screen. Any ideas for me?
I've run diagnostics. Can't find device. I've tried resetting. The toggle has been turned on and off.

Cable works fine on my other iPod. Reset by pressing menu and center button together for 6-10 seconds. Left it to charge for many hours. Started acting up while running. Suddenly the music stopped playing but my Nike + was still working for the rest of my run. Took it straight it home and plugged it in to the wall to recharge since the battery was fairly low. Looked like it recharged ok but then screen went blank and now does it not show up on iTunes, does not seem to recharge by the wall charger (apple wall charger plugged into a surge protector in India). I have turned the hold switch off and on many times.
Sounds like a repair issue, which is not easy to do in India :(

HT4623 When i click on general settings, the software update does not seem to come up? It wont let me download any apps.

When i click on general settings, the software update does not seem to come up? It wont let me download any apps.
I Want to download i0s 5
i have ipod touch 3rd gen

You need to connect your iPod to iTunes on a computer and update from there.
Before updating, I recommend that you create a backup first, using : http://support.apple.com/kb/ht1766
Please note that iPod 3d generation only goes up to iOS 5.1.1
To update the iPod, use: http://support.apple.com/kb/ht4623
scroll down to the part that's about updating with iTunes.
Good luck
Stijn
Message was edited by: jesterwylde

Sony VG-10 - Premiere CS6 does NOT seem to like it

Similar Messages

Maybe you are looking for