Sony Xperia Z experiences few usability issues after updating to latest software

Recently I upgraded my Sony Xperia Z phone (see snapshot for current upgraded system info)
After this upgarde I am facing few usability issues like ease of keyboard use
I lost all saved words from disctionary, also punctuations symbols bar at top of keyboard is missing (see image)
When I enter any wrong word and I want to delete/modify entered word.. now it deletes character by character instead of whole word (earlier behavior)
What is the solution to get that top symbols bar in keyboard?
itsvaibh

Download sony update service,attempt a repair of software.Before that,backup your data.
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Similar Messages

  • My Sony Xperia ZL does not recognize the last update of the software

    My Sony Xperia ZL does not recognize the last update of the software or from the same mobile or from the computer app, I formatted the phone but it still does not recognize it when I give updates check it tells me that the phone have the latest software.
    Thanks

    You can find the latest available software update information on our product blog. When an update is available for your phone you will get a notification.
    If want to know more about software roll out process and how it works please see this topic.

  • Issues after updating iPhone3GS to iOS5 on TIM cellular data network (Italy)

    Hi everyone
    I have issues after updating iPhone3GS to iOS5 on TIM cellular data network.
    After installing iOS5 I had to switch from apn ibox.tim.it to wap.tim.it
    Since then the phone is unusable for any internet activity that is barely "data demanding" (e.g facebook app take literaly hours to update), everyting requires way to much time... the iPhone is not an iPhone anymore... it's worse than my blackberry with just GPRS on it.
    TIM technical support suggested me to switch back on apn ibox.tim.it, but then I would not be able to use internet tethering anymore (they say because of Apple iOS5) ... to bad I need internet tethering for work.
    I am seriously thinking to switch ISP or phone.
    Anyone did experience same problem / found a solution?

    Hi Raia.D,
    Welcome to the Support Communities!
    The first thing I would suggest is to restart your iPhone.  Then tap the Settings app, and you should see Cellular listed on the main settings screen.  You should see Airplane Mode, Wi-Fi, Bluetooth, and then Cellular.
    Here are some additional troubleshooting steps to try:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    Cheers,
    - Judy

  • Syncing issues after updating to 10.3.1.55

    After upgrading to itunes 10.3.1.55, today, it no longer recognizes my iPhone 4. I plug it in, the iPhone makes its normal syncing noice. I get a prompt, like always about it recognizing the camera and how i want to handle it. I cancel it, as usual, and then it never shows up in iTunes. I close itunes, connect my phone and it does not start itunes as it normally should. No error messages, just no response. Can anyone help with ideas?

    I had the same issue, after updating to 10.3.1.55 it would error out saying something along the lines of not being able to read the catalog or something.  I think the error even states do a restore to fix it.  Last night that is what I did, clicked restore and then had it transfer all my items back.  I'm glad I had just synced my phone prior to the update so the restore was really current.

  • Firewire epson R2400 issues after update to 10.8.4 will not print causes system shutdown

    anyone had similar issue and or a fix?

    issues after update
    Download and install new drivers from the Epson site for your printer model.
    Epson Stylus Photo R2400, Drivers & Downloads - Technical Support - Epson America, Inc.

  • Issues not resolved after updating to latest SP BO 4.0

    Issues not resolved after updates to latest SP
    We initially installed BO 4.0 with SP4 FP3. After that updated the installation to SP6, SP7, SP8, SP9 and SP9 patch3. We skipped SP5 as it had no issues effecting the way we work.
    Now we discovered that most of the important issues for development like being able to modify merged dimensions by adding a dimension are not resolved, despite the updates which would have fixed the issue.
    Any ideas?
    Is it possible to install SP5 afterwards and then update again to the new SP10?

    You don't need to install SP5. Latest SP you have installed, will have all the fixes of SP5.
    You cannot install SP5 after installing SP9. There is no need to install aslo.

  • "KERN_INVALID_ADDRESS at 0x000000ac" I am facing this issue after updateing my device to ios 5 and my app crashes with this error

    "KERN_INVALID_ADDRESS at 0x000000ac" I am facing this issue after updateing my device to ios 5 and my app crashes with this error

    "KERN_INVALID_ADDRESS at 0x000000ac" I am facing this issue after updateing my device to ios 5 and my app crashes with this error

  • Safari, App Store Issues after updating to 10.7.2

    I have been running my imac that came preinstalled with Lion
    I am having this wierd issue after updating to 10.7.2 recently
    When i run Safari, App Store, Itunes, i can see its loading..
    but after 2 hours its still loading.
    It just seems to be stuck and its not the Beach ball.. So i dont think it hanged
    Its not a network issue as well, since i am typing this on Firefox, which is running perfectly
    What could be the reason?

    I'm having the same issue on my iMac. I've also noticed the rear of the left side is getting a lot hotter than normal.
    I downloaded (from: http://support.apple.com/kb/DL1459) the update again and reinstalled it. But nothing's changed. Is there anything else I can try?
    Scott

  • After update the latest iOS 4 my ipad screen sometimes continues moving

    Why after update the latest iOS 4.3, my ipad screen sometimes continues moving and hard to chose or touch the keyboard or icon?

    I have the exact same issue. The screen moves up and down just a little so the bars in the top left hand corner are almost hidden. And pressing icons does not work at times. Pressing buttons inside open apps does not work at times or takes forever to execute the command. Also, some apps freeze or open and then suddenly close. I updated all my apps to determine if the cause was an app that is not compatible with the new operating system. This did not work. Is there a way to update again? Could the problem be that the update was corrupted in some way? Any suggestions would be appreciated. It did not happen with my iPhone when I installed the update.

  • I tried to update the latest software update for my MacBook pro (which was on 10/12) and after it started to update it restarted like normal but when it started back up it was running painfully slow and none oft programs will open.They all quit unexpectal

    I tried to update the latest software update for my MacBook pro (which was on 10/12) and after it started to update it restarted like normal but when it started back up it was running painfully slow and none oft programs will open.They all quit unexpectedly. iTunes microsoft word all of them quit unexpectedly. Help!

    Exact same problem with my 2010 MBP 2.4ghz 4gb ram 10.6.8. iTunes said update was needed, Software Update ran with various updates including a security update, truthfully didn't pay much attention, I always install the Apple updates. After the restart it took 3-4 times longer than normal to get to the login screen, same to get to the desktop but I'm familiar with that occurring on update restarts. Unfortunately it got worse from there. Performed a full shutdown and startup. Same long boot.  After the desktop finally loads every mouse button press received a 2 minute beachball. I use menu-meters and both processors are under 10%. Waited a few minutes for disk utilities to launch, repair permissions estimates 3 hours for a typical <10 minute process. Activity monitor shows nothing over 10% CPU most of the time however ReportCrash pops to the top often. Any suggestions would be greatly appreciated. BTW zero problems until this update.

  • Desktop Manager gone after updating to Desktop Software

    I am unable to find Desktop Manager after Updating to Desktop Software Version 6. Please How do I Install Apps using Desktop Software.
    Are Desktop Manager and Desktop Software the same??..  Help Please
    Thanks in advbance
    johngrant

    Hi and Welcome to the Forums!
    Please see this KB for hopefully useful information.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • After updating to latest Firefox - when I click on google taskbar my CPU usage goes to 100% and stays there... and computer is really slow. No other search engine show the 100% usage like Google. There was NOT a problem with older versions of Firefox...?

    My computer got really slow after updating to latest version of Firefox. I checked all processes and I was testing the system. THe CPU usage goes between 2 and 70 percent staying around 25% on average, when I check my e-mail. As soon as I click on Google taskbar (without even typing in anything) the CPU usage jumps to 100% and STAYS at 100 %, and computer extremely slow.

    My computer got really slow after updating to latest version of Firefox. I checked all processes and I was testing the system. THe CPU usage goes between 2 and 70 percent staying around 25% on average, when I check my e-mail. As soon as I click on Google taskbar (without even typing in anything) the CPU usage jumps to 100% and STAYS at 100 %, and computer extremely slow.

  • After updating with Nokia Software Updater my E66 ...

    After updating with Nokia Software Updater my E66 asks for Lock code. Please any body help me

    If you are only interested in maps.. download the installer from here ...Click on 'Download' under Instructions and then again 'Download' ..

  • Problem after updating to latest version 10.0.1

    After updating to latest version 10.0.1, every time Firefox starts it checks for add-ons compatibility before opening, this is very irritating. How can I stop this?

    See:
    *http://kb.mozillazine.org/Preferences_not_saved
    *https://support.mozilla.org/kb/Preferences+are+not+saved
    It is possible that there is a problem with the file(s) that store the extensions registry.
    Delete the files extensions.* (e.g. extensions.sqlite, extensions.ini, extensions.cache) and compatibility.ini in the Firefox profile folder to reset the extensions registry.
    *https://support.mozilla.org/kb/Profiles
    New files will be created when required.
    See "Corrupt extension files":
    *http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
    *https://support.mozilla.org/kb/Unable+to+install+add-ons
    If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the Tools button at the left side of the Search Bar (or click the "Find Updates" button in older Firefox versions) to do a compatibility check or see if there is a compatibility update available.

  • After attempting to update to latest software, iphone 4 stuck showing connect to itunes picture screen, computer will not recognize device, have tried restarting/restoring/hard reset/every suggestion listed on apple troubleshooting website. thoughts?

    after attempting to update to latest software, my iphone 4 is stuck showing "connect to itunes" picture screen. My computer will not recognize device. I have tried restarting/restoring/hard reset/reinstalling itunes and every other suggestion listed on apple troubleshooting website. thoughts?

    The next step is to try recovery mode as described here:
    iOS: Unable to update or restore

Maybe you are looking for