Sony Xperia z1 sound on the left doesn't work

Hello everybody,
I have a problem with my sony xperia z1.
On the left side the sound doesn't work anymore.
I don't know if I put it out accidentally or if there's something broken.
It is only with headphones.
The right side just gives normal sound but the left side is completely shut off.
If I just listen on the speaker there is no problem.
Please help!
Solved!
Go to Solution.

Check if there is something in the 3.5 mm input,some dirt or something.If that is not the problem,you might need new headphones.
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Similar Messages

Sound from the left doesn't work on my MacBook pro. This includes when using headphones.

This just recently happened within the week. I've updated to Mavericks a long time ago so I'm not suspecting that. Any suggestions?

Go step by step and test.
1. System Preferences > Sound > Output > Internal Speakers/Headphone
    Settings for the selected device:
    Balance:
    Make sure that the slider is set at middle.
2. Reset PRAM. http://support.apple.com/kb/PH4405
3. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

The left part of the screen doesn't work very well

The left part of the screen doesn't work very well. It's hard to erase a letter, and impossible to me to insert the "P".
Does it means that I need to replace the screen? Or there is a other solution?

Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new.
If you've gone through ALL the troubleshooting steps and you're still having the problem, then you most likely have a hardware issue and will need to bring your phone to Apple for evaluation.

My 13" macbook just stopped working. When you turn it on you get a white screen and hear a repetitive clicking sound on the left side. Is this the hard drive? Any suggestions on replacement drives?

My 13" macbook just stopped working. When you turn it on you get a white screen and hear a repetitive clicking sound on the left side. Is this the hard drive? Any suggestions on replacement drives?
Thanks

Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is, then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions. After repairing use Startup Disk from the same menu to choose your hard drive for restarting from your hard drive.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

Clicking sound of the left part of the Equim A200

My equim A200 is making weird clicking sounds on the left part of the laptop.
I have no idea what this could be but every day it seems to get worse then some days it will go all together.
Could someone please help as I need to know whether to get a new laptop because I have a lot of important stuff saved on this one.
Thanks.

Hi
Clinking noise on the left?
Hmm. possibly its generated by cooling module or the HDD.
On the left you can find the cooling modules (cooling grilles) and the HDD bay in my opinion its one of these both parts.
My HDD clicks from time to time I dont know why but sometimes I can hear such clicking noise. I doubt its a HDD malfunction but I have created the backup of my files on the HDD. This is always advisable and should be done.
I mean the HDD crash can happens always and in such case a backup can spare many troubles

MacBook Pro, the left speaker doesnt work

Hi all,
As per title i bought a second hand MacBook Pro A1286, the left speaker doesnt work though. I have tried to unclick "Use ambient noise reduction" that hasnt worked. I also did the cmd, alt, R and P reset. That also didnt work, i was wondering if there is anything else i could check ? before i replace the speaker ?
Thanks in advance.
Kimberly

System Preferences > Sound > Output
Balance:
Make sure that pointer is set at the middle.
Reset SMC. http://support.apple.com/kb/HT3964
Choose the right method.
Best.

I bought a Macbook Pro about 2 months back, its been working fine till now, but today i discovered a very unusual issue, whenever i plug in my earphones, the left one doest work, the earphones are okay i checked them with my iphone, and they work fine.

I bought a Macbook Pro about 2 months back, its been working fine till now, but today i discovered a very unusual issue, whenever i plug in my earphones, the left one doest work, the earphones are okay i checked them with my iphone, and they work fine.
PLease help.

System Preference > Sound > Output
Balance
Move the pointer to the middle.
Best.

Just bought iPad gen3 the silence switch on the side doesn't work, it shows the symbol on screen but doesn't silence the iPad?????

Just bought iPad gen3 the silence switch on the side doesn't work, it shows the symbol on screen but doesn't silence the iPad?????

The Side Switch is to mute your ringers, and most of the application's sound. To totally mute the sound, you must use the rocker to mute it.

My ipod touch 3G the bottom doesn't work. How do i fix it?

Everything on the top works. From the bottom, its slowly moving up. now i'm not able to slide to unlock it.

If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

My new iMac has recently had OSX Lion installed on it and now when I start the machine it looks like its updating something every time, and the wireless doesn't work. So I restart and everything is OK - until I have to start up again the next time?

My new iMac has recently had OSX Lion installed on it and now when I start the machine it looks like its updating something every time, and the wireless doesn't work. So I restart and everything is OK - until I have to start up again the next time - then I have to repeat this again! Any help appreciated.

I've been having the same issue, but have just discovered something on my own that hasn't been pointed out in any of the forums I've visited. In what I thought would be a vain attempt to help myself, I went to System Preferences, Users & Groups, and then clicked on Login Items. I discovered that one of the Items that was listed to open automatically upon login was iTunes Helper and that there was an exclamation point beside it indicating that it was incompatible. I simply deleted that item and now I don't have the situation you described and my wireless is connected. Hope this helps!

Does anyone else have two Apple IDs? I can't get rid of one of them. It's associated with my iCloud account and I can't fix it. The password doesn't work.

So, apparently I have two Apple IDs associated with my iPhone. One is an old aol address that got hacked and was shut down. Even aol doesn't recognize the email address anymore, and the password doesn't work. It's associated with my iCloud account, so now I can't access that account. My other Apple ID is with everything associated with my iPhone and everything works just fine. But now I can't get to my iCloud stuff. Has this ever happened to anyone else. The guy at the Apple store says he's never heard of it.

Does the alert refer to "Local Items?"

I have purchased the Adobe Creative Suite 4 and now my first dvd of the software doesn't work anymor

I have purchased the Adobe Creative Suite 4 and now my first dvd of the software doesn't work anymore. My computer doesn't want to read it anymore. I want to mention that I also tried on some other computers and still the problems continues. How can I solve this? On the Adobe webpage I can't find anymore the download for Adobe CS4. Thanks. Marius Lupu

You can download the software from http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html and can serialize it with the serial number you have.
NOTE:- READ THE INSTRUCTION PROPERLY TO AVOID ANY ERROR.

Count(*) in the loop doesn't work and I really don't know why...

Hello,
I can't figure out why the following doesn't work. I cannot debug for I do not have privileges on this server.
The execution always fails on bolded line. If I substitute the variable with the table name itself it works. The variable is properly populated in each of the iterations as I can see it by using dbms_output package. The small but may be important detail may be I am connected as user A but the tables are in the schema B. However I can list the tables and their columns in all_tab_cols view and there are synonyms made in my schema which allow me to access the B tables without prefixing them.
I get the error:
Error report:
ORA-00900: invalid SQL statement
ORA-06512: at line 26
00900. 00000 - "invalid SQL statement"
*Cause:
*Action:
I ran out of ideas and I do not have access to any of the Oracle instance to be able to debug right now.
Variable type for v_tables is wrong? I do not have some magic privilege to use execute immediate with variable?
Oracle server has a bad day today?
The crap is 11.1.0.7 if it has anything to do with my problem.
Please help if you can.
Grzegorz
declare
v_number number := 646989;
v_current_table nvarchar2(50);
v_itemno number;
type t is table of nvarchar2(50);
v_tables t;
begin
dbms_output.put_line('Working...');
select table_name bulk collect into v_tables from all_tab_cols where column_name = 'ITEMNO' order by table_name;
for i in 1 .. v_tables.count loop
dbms_output.put_line('Number: ' || i);
v_current_table := v_tables(i);
<b>execute immediate 'select count(*) from ' || v_current_table || ' where itemno = :a' into v_itemno using v_number;</b>
if (v_itemno > 0) then
dbms_output.put_line('Current table contains specific ITEMNO: ' || v_current_table);
end if;
end loop;
end;

In SQL Plus run this and see what SQL is your code returning. Then execute the SQL individually.
set serveroutput on
declare
     v_number number := 646989;
     v_current_table nvarchar2(50);
     v_itemno number;
     type t is table of nvarchar2(50);
     v_tables t;
     lSqlString varchar2(20000);
begin
     select table_name
       bulk collect into v_tables
       from all_tab_cols
      where column_name = 'ITEMNO'
      order by table_name;
     for i in 1 .. v_tables.count loop
          v_current_table := v_tables(i);
          lSqlString := 'select count(*) from ' || v_current_table || ' where itemno = :a';
          dbms_output.put_line(lSqlString);
          --execute immediate lSqlString into v_itemno using v_number;
     end loop;
end;

How can i make a new map on my mail? The way apple has in the manual doesn't work!

I want to make a new map for my mails, but the way tha apple gives in the manual doesn't work!

If you mean other folders then you need to create them in your email client e.g. in a browser (which you can only do in IMAP accounts, not POP account) - you can't create new folders in the Mail app itself

I need to backup my iPhone, but it is locked and the touchscreen doesn't work

So I dropped my 3 year old iphone in the toilet and now the touchscreen doesn't work. I want to backup the information so I can transfer my apps to the new phone, but I have my phone locked and I cannot enter the code because, as I said, the touchscreen doesn't work. How can I back up my old phone?

If you back it up using the computer it normally syncs to, you won't be prompted for the passcode. If you have not been syncing it with a computer, then you're pretty much out of luck at this point.

Sony Xperia z1 sound on the left doesn't work

Similar Messages

Maybe you are looking for