Sony Xperia Z2 for all carriers in United States

We want Sony Xperia Z2 on all carriers in United States and do anybody know the Japan / America Sony's CEO and Presidents e-mail address.
http://www.change.org/petitions/sony-bring-over-the-sony-xperia-z2-to-the-united-states-to-all-carri...

uliwooly wrote:
If you think about it, its not so much that Sony doesn't want to bring phones to the US but carriers wanting the phones, AT&T destroy Xperia phones with the bloatware and T-mobile well they try but they are not there yet, Verizon and Sprint are CDMA and well that's another issue
What the h e l l is bloatware and besides AT&T, Verizon his the fastest 4G LTE service in the US T-Mobile isn't even close compare to them yet, plus who in the world buys sprint's cell phones anymore cause if you look around ebay most people just sells them their now days, sony xperia Z1 should have been here in North America when they started shipping it worldwide that was a bad business decision on Sony's part its unbelievable how they have better cell phone but we have to spend a lot of money for a unlocked version of that phone its ridiculous with sony we can buy a PS4 here but not a Sony Xperia phone without breaking the bank how f**k up is that.

Similar Messages

HT4993 i have iphone5 A1429 locked by sprint. now i am in Saudia Arabia. i want to unlock it for all carrier. pls help me.

i have iphone5 A1429 locked by sprint. now i am in Saudia Arabia. i want to unlock it for all carrier. pls help me.

Are you a Sprint customer? If so, contact Sprint and see if you qualify to have it unlocked for use on non US carriers.
If you are not a Sprint customer, sell it to someone in the US who can use it. Sprint will only unlock iPhones for current Sprint customers in good standing.

I cannot activate my iphone 4 (its opened for all carriers)

I cannot activate my iphone after updating
I bought it from mobily saudi arabia
Its now in tounisia
its opened for all carriers
It was working ok on tounisia carriers before updating
Its asking for activation by another SIM card
Please open the activation for my iphone
IMEI
xxxxxxxxxxx
Serial
xxxxxxxxxxx
<Edited By Host>

You are all right
The problem was not from the device it self
When my friend took it to the shop ... The guy in that shop is a bad guy
He have changed some hardware so that the serial changed
I don't know how .. But I notice that when I check the iPhone box which I have
The serial is not the same and then I found that the serial which I wrote is for locked iPhone for France orange
I'll see what to do tomorrow
Thanx all for your help
Bad guys are always making problems
Sorry for u all

Joins And For all Enteries in Select Statement

Could you please tell me when there is a high amount of data which is being handled in the table, does the use of INNER JOINS and FOR ALL ENTERIES in SELECT Statement decreases the system performance? ?
Can you also let me know where can i get some tips regarding do's and dont's for ABAP Programming, I want to increase my system performance.
Currently the programs which are being used are taking a lot of time for execution...
Its very URGENT!

Hai Jyotsna
Go through the following Tips for improving Performence
For all entries
The for all entries creates a where clause, where all the entries in the driver table are combined with OR. If the number of entries in the driver table is larger than rsdb/max_blocking_factor, several similar SQL statements are executed to limit the length of the WHERE clause.
The plus
Large amount of data
Mixing processing and reading of data
Fast internal reprocessing of data
Fast
The Minus
Difficult to program/understand
Memory could be critical (use FREE or PACKAGE size)
Some steps that might make FOR ALL ENTRIES more efficient:
Removing duplicates from the driver table
Sorting the driver table
If possible, convert the data in the driver table to ranges so a BETWEEN statement is used instead of and OR statement:
               FOR ALL ENTRIES IN i_tab
                  WHERE mykey >= i_tab-low and
             mykey <= i_tab-high.
Nested selects
The plus:
Small amount of data
Mixing processing and reading of data
Easy to code - and understand
The minus:
Large amount of data
when mixed processing isnt needed
Performance killer no. 1
Select using JOINS
The plus
Very large amount of data
Similar to Nested selects - when the accesses are planned by the programmer
In some cases the fastest
Not so memory critical
The minus
Very difficult to program/understand
Mixing processing and reading of data not possible
Use the selection criteria
SELECT * FROM SBOOK.
CHECK: SBOOK-CARRID = 'LH' AND
                  SBOOK-CONNID = '0400'.
ENDSELECT.
SELECT * FROM SBOOK
WHERE CARRID = 'LH' AND
        CONNID = '0400'.
ENDSELECT.
Use the aggregated functions
C4A = '000'.
SELECT * FROM T100
WHERE SPRSL = 'D' AND
        ARBGB = '00'.
CHECK: T100-MSGNR > C4A.
C4A = T100-MSGNR.
ENDSELECT.
SELECT MAX( MSGNR ) FROM T100 INTO C4A
WHERE SPRSL = 'D' AND
       ARBGB = '00'.
Select with view
SELECT * FROM DD01L
WHERE DOMNAME LIKE 'CHAR%'
        AND AS4LOCAL = 'A'.
SELECT SINGLE * FROM DD01T
    WHERE   DOMNAME    = DD01L-DOMNAME
        AND AS4LOCAL   = 'A'
        AND AS4VERS    = DD01L-AS4VERS
        AND DDLANGUAGE = SY-LANGU.
ENDSELECT.
SELECT * FROM DD01V
WHERE DOMNAME LIKE 'CHAR%'
       AND DDLANGUAGE = SY-LANGU.
ENDSELECT.
Select with index support
SELECT * FROM T100
WHERE     ARBGB = '00'
       AND MSGNR = '999'.
ENDSELECT.
SELECT * FROM T002.
SELECT * FROM T100
    WHERE     SPRSL = T002-SPRAS
          AND ARBGB = '00'
          AND MSGNR = '999'.
ENDSELECT.
ENDSELECT.
Select Into table
REFRESH X006.
SELECT * FROM T006 INTO X006.
APPEND X006.
ENDSELECT
SELECT * FROM T006 INTO TABLE X006.
Select with selection list
SELECT * FROM DD01L
WHERE DOMNAME LIKE 'CHAR%'
        AND AS4LOCAL = 'A'.
ENDSELECT
SELECT DOMNAME FROM DD01L
INTO DD01L-DOMNAME
WHERE DOMNAME LIKE 'CHAR%'
       AND AS4LOCAL = 'A'.
ENDSELECT
Key access to multiple lines
LOOP AT TAB.
CHECK TAB-K = KVAL.
ENDLOOP.
LOOP AT TAB WHERE K = KVAL.
ENDLOOP.
Copying internal tables
REFRESH TAB_DEST.
LOOP AT TAB_SRC INTO TAB_DEST.
APPEND TAB_DEST.
ENDLOOP.
TAB_DEST[] = TAB_SRC[].
Modifying a set of lines
LOOP AT TAB.
IF TAB-FLAG IS INITIAL.
    TAB-FLAG = 'X'.
ENDIF.
MODIFY TAB.
ENDLOOP.
TAB-FLAG = 'X'.
MODIFY TAB TRANSPORTING FLAG
           WHERE FLAG IS INITIAL.
Deleting a sequence of lines
DO 101 TIMES.
DELETE TAB_DEST INDEX 450.
ENDDO.
DELETE TAB_DEST FROM 450 TO 550.
Linear search vs. binary
READ TABLE TAB WITH KEY K = 'X'.
READ TABLE TAB WITH KEY K = 'X' BINARY SEARCH.
Comparison of internal tables
DESCRIBE TABLE: TAB1 LINES L1,
                TAB2 LINES L2.
IF L1 <> L2.
TAB_DIFFERENT = 'X'.
ELSE.
TAB_DIFFERENT = SPACE.
LOOP
AT TAB1.
    READ TABLE TAB2 INDEX SY-TABIX.
    IF TAB1 <> TAB2.
      TAB_DIFFERENT = 'X'. EXIT.
    ENDIF.
ENDLOOP.
ENDIF.
IF TAB_DIFFERENT = SPACE.
ENDIF.
IF TAB1[] = TAB2[].
ENDIF.
Modify selected components
LOOP AT TAB.
TAB-DATE = SY-DATUM.
MODIFY TAB.
ENDLOOP.
WA-DATE = SY-DATUM.
LOOP AT TAB.
MODIFY TAB FROM WA TRANSPORTING DATE.
ENDLOOP.
Appending two internal tables
LOOP AT TAB_SRC.
APPEND TAB_SRC TO TAB_DEST.
ENDLOOP
APPEND LINES OF TAB_SRC TO TAB_DEST.
Deleting a set of lines
LOOP AT TAB_DEST WHERE K = KVAL.
DELETE TAB_DEST.
ENDLOOP
DELETE TAB_DEST WHERE K = KVAL.
Tools available in SAP to pin-point a performance problem
·                The runtime analysis (SE30)
·                SQL Trace (ST05)
·                Tips and Tricks tool
·                The performance database
Optimizing the load of the database
Using table buffering
Using buffered tables improves the performance considerably. Note that in some cases a statement can not be used with a buffered table, so when using these statements the buffer will be bypassed. These statements are:
Select DISTINCT
ORDER BY / GROUP BY / HAVING clause
Any WHERE clause that contains a sub query or IS NULL expression
JOIN s
A SELECT... FOR UPDATE
If you wan t to explicitly bypass the buffer, use the BYPASS BUFFER addition to the SELECT clause.
Use the ABAP SORT Clause Instead of ORDER BY
The ORDER BY clause is executed on the database server while the ABAP SORT statement is executed on the application server. The database server will usually be the bottleneck, so sometimes it is better to move the sort from the database server to the application server.
If you are not sorting by the primary key ( E.g. using the ORDER BY PRIMARY key statement) but are sorting by another key, it could be better to use the ABAP SORT statement to sort the data in an internal table. Note however that for very large result sets it might not be a feasible solution and you would want to let the database server sort it.
Avoid the SELECT DISTINCT Statement
As with the ORDER BY clause it could be better to avoid using SELECT DISTINCT, if some of the fields are not part of an index. Instead use ABAP SORT + DELETE ADJACENT DUPLICATES on an internal table, to delete duplicate rows.
Thanks & regards
Sreenivasulu P

Not responding without using sony xperia c4 for more than 7 hours

Hai, I am using Sony xperia C4 which i bought 20 days back My problem is when i keep my phone idle(i.e not using it for more than 7 hours), and then when i press the power button back, the screen turns black and not responding too. notification lights were on, and once i force shutdown my phone ,then the phone restarts and back to normal.. and that time my battery was in 20-30%... Please reply to this issue Thanks

I suggest that you try to repair the phone software using PC Companion..
Before repairing your device you may want to backup your information first. Check out this topic for more information on how to.
How to backup?
If the issue should still remain I think that this needs to be examined and fixed at a repair center. For more information about how to submit your phone for repair and where, contact your local support team.

For all entries in read statement

hi
is there any command equivalent to for all entries in read statement

Hi,
You have to use Loop at...and move the values from the it_vbrp to the final internal table..
Example
LOOP AT IT_OUTPUT.
MOVE-CORRESPONDING IT_OUTPUT TO IT_FINAL.
LOOP AT IT_VBRP WHERE AUBEL = IT_OUTPUT-VBELN
                                AND     AUPOS = IT_OUTPUT-POSNR.
      MOVE-CORRESPONDING IT_VBRP TO IT_FINAL.
      APPEND IT_FINAL.
ENDLOOP.
IF SY-SUBRC <> 0.
    APPEND IT_FINAL.
ENDIF.
ENDLOOP.
Thanks,
Naren

'FOR ALL ENTRIES' in SELECT statements

Hi,
I got a doubt in working of the 'FOR ALL ENTRIES' option in the SELECT statement. Here is my scenarion.
Table A - Document Header Level (Key: Doc Number)
Internal Table B - Document Item level (Keys: Doc num and Doc Item).
So, for each record in Table A, table B will have multiple records.
In this situation, how the below SELECT will work.
SELECT <field names> INTO <some internal table>
                     FROM A
                     FOR ALL ENTRIES in B
                     WHERE doc_num = B-doc_num.
Will the above SELECT result in duplicate records or not?
(I tested it and found that it doesn't! I was lil surprised and wanted to confirm that)
Thanks & Regards,
Sree

Hi,
For all entries option basically sorts out the entries in the internal tbale based on the where condition and thus it only picks the unique entries based on the list.
so indeed your table A is a header one so it will give you only single value. if you go by the reverse way where in look for B for all entries in A it will give you multiple values as table B has multiple values for each value in A.
Regards,
Jagath

What is the use of for all entries in select statement

what is the use of for all entries in select statement

hi,
FOR ALL ENTRIES is an effective way of doing away with using JOIN on two tables.
You can check the below code -
SELECT BUKRS BELNR GJAHR AUGDT
FROM BSEG
INTO TABLE I_BSEG
WHERE BUKRS = ....
SELECT BUKRS BELNR BLART BLDAT
FROM BKPF
INTO TABLE I_BKPF
FOR ALL ENTRIES IN I_BSEG
WHERE BUKRS = I_BSEG-BUKRS
AND BELNR = I_BSEG-BELNR
AND BLDAT IN SO_BLDAT.
*******************************8
look another example
what is the use of FOR ALL ENTRIES
1. INNER JOIN
DBTAB1 <----
> DBTAB2
It is used to JOIN two DATABASE tables
having some COMMON fields.
2. Whereas
For All Entries,
DBTAB1 <----
> ITAB1
is not at all related to two DATABASE tables.
It is related to INTERNAL table.
3. If we want to fetch data
from some DBTABLE1
but we want to fetch
for only some records
which are contained in some internal table,
then we use for alll entries.
1. simple example of for all entries.
2. NOTE THAT
In for all entries,
it is NOT necessary to use TWO DBTABLES.
(as against JOIN)
3. use this program (just copy paste)
it will fetch data
from T001
FOR ONLY TWO COMPANIES (as mentioned in itab)
4
REPORT abc.
DATA : BEGIN OF itab OCCURS 0,
bukrs LIKE t001-bukrs,
END OF itab.
DATA : t001 LIKE TABLE OF t001 WITH HEADER LINE.
itab-bukrs = '1000'.
APPEND itab.
itab-bukrs = '1100'.
APPEND itab.
SELECT * FROM t001
INTO TABLE t001
FOR ALL ENTRIES IN itab
WHERE bukrs = itab-bukrs.
LOOP AT t001.
WRITE :/ t001-bukrs.
ENDLOOP.
Hope this helps!
Regards,
Anver
<i>if hlped pls mark points</i>

Sony Xperia z1 crashes all the time

It's just 3 months ago I got xperia Z1 and now it crashes all the time.. Whenever I use any app the application stops and it gets me to home screen. What should I do now??

Download sony update service and repair your software.
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

HT4061 how do i open an iphone for all carriers through imei payment?

my friend has an iphone that was bought at HONK KONG but belong to an american carrier.
i wanted to know how do i open my phone for an israeli company carrier throguh IMEI?
i know i need to pay but through what site do i do this? apple?
thank you

A couple more thoughts, though you didn't asked - the warranty on that iPhone is going to be suspect, normally Apple only warranties an iPhone for the country of purchase (an American carrier iPhone is considered US item and warranty only exists in the US), and check the frequency specs for the iPhone and see they match the carrier frequencies in Israel...not every country/carrier is using the same frequency allocations that the US carriers are using. Especially if this is a Verizon iPhone. You may have additional issues in that area as well.

With their only being (1) iPhone 4S for all carriers and apple can unlock the device at the point of sale, will Apple be giving out the unlock codes after your term has ended? Or could apple flash the device to be unlocked?

If you buy the 4S on contract for AT&T, pay the early term fee and want to go to sprint with your 4S, is this possible?

No. It's not up to Apple. It's up to the carrier it is locked to. Regulations vary from country to country as to whether carriers are required to unlock phones. In the U.S. carriers are NOT legally required to unlock phones, therefore, they will not.

Generic Hand Held Code for all Carriers

Will there ever be a generic version of the OS that we will be able to download and install on our Blackberries regardless of carrier?

You do know that can be done now simply by removing the vendor.xml file from the install package on your PC?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

HT1688 i have a iphone 4 for my sisten from Unite State, I'm living in Dominican REpublic and i cant use the iphone here

Hello i wanna desblock my iphone in dominicam republic
IMEI: 01 326800 367768 6
ICCID: Unknow

Only the carrier it's locked to can authorize unlocking it.
If the phone is displaying ICCID unknown, then it's a brick. That's a critical failure, usually caused by jailbreaking/hacking. It can not be fixed.

How to unlock my Samsung S3 for use outside the United States?

Good day. I'm in Colombia and bought a team of your company on ebay, but I can not use in my country. Could you send me a code or useful instructions how to do with cellular networks here

Hey
I understand you’d like to use an AT&T locked device on another network! I can help you with that!
You can request an unlock for your device by visiting http://att.com/deviceunlock/ and reviewing the requirements. If you are eligible per the requirements, continue on to the unlock form and submit your personal and device information. Upon submitting, you will receive an email from which you must confirm your request within 24 hours. Your unlock request will then be processed within 2 business days, at which point we will email you with our decision!
I hope this helps!
Charise

Vegas bingo is no longer available for download in the united states

This app is no longer available and it recently was available. Does anyone know why it was removed from iTunes?

Contact the developer. Sometimes Googling will show why.

Sony Xperia Z2 for all carriers in United States

Similar Messages

Maybe you are looking for