Sony z1 probleme

Hi i have a probleme with my new sony z1 when i make photos with it it disapears when connect it to pc and knowing that i don't have sd card and the default is the interne storage. 2 probleme is when charge it or connecte it to pc some kind of publicité about z1 and it won't stop

You may need to perform a software repair using PC companion.The process will erase all internal memory.You might need to charge your device for about 1-2 hours before so the device has at least 60% battery.
Make sure the device is not connected to computer or laptop and turned off (sometimes you have to press power button and volume up until the device vibrates 3 times or on some devices you have to press the small button near the SIM tray or on the back of the device).
Open PC companion->support zone->phone/tablet software update->repair my phone/tablet blue highlighted.Follow the steps given,do not connect your phone until prompted to press volume down while plugging USB cable. If PC companion does not start the repair process, you might need to run it in compatibility mode with Windows 7 (in some cases XP).
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Similar Messages

Sony Liveview problem with battery drain!Help

Please help, i have just bought Liveview, i charged full for 4h, when i connected, battery drain very fast in 3 - 4 minutes when i use plugins after that Liveview turn off?? Please help me how to fix ít, i can't use ít , i think it have a problem with firmware! I use Xperia ion ics 4.0.4

If the battery is only lasting 10 mins I would advise returning this particular device so that it may be assessed.
What are your thoughts about this forum? Let us know by doing this short survey.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Sony Handycam Problem

Last week I bought a sony dcr-dvd403 to videotape my daughter's first birthday party, which is now tomorrow!!!
It is a mini DVD, not a mini DV. The recording and finalizing go fine. The video plays on the camera. Then, I load the disc into the top loading drive I bought specifically to load the mini discs on my computer, and boom - just a bunch of files the computer can't open... The file extensions are .BUP, .IFO, AND .VRO.
I think the .VRO is the one where the video footage resides. Does anyone know how to convert it. After hours on the phone with sony (who doesn't promise that the discs will play in anything other than the camera itself) says to call Apple. Apple, said to check the discussion boards. You guys are my only hope! Thanks,
Liz

I picked this up from a "dvspot" article by Jim Keller, and have used it successfully. By the way, I have abandoned my Sony mini-DVD camera and bought the new HD-HC1 high def camcorder because it records to digital video tape and has Firewire output, which avoids this problem. Keller's solution:
"So how do you extract the video? On my Mac, I used a program called OpenShiiva, an open source VOB-to-MPEG4 converter (there are other products like this out there). This turned the 13 VOB files into 13 MP4 files, which may be as far as some people need to go. However, Final Cut has no interest in reading these, so I had to open the MP4 files in QuickTime, and export them into DV format. Then I was able to import them into Final Cut, where they still needed to be split up into separate clips. I should add that Final Cut can read VOB files, but the sound does not get imported for some reason.
To tie things back into what I said much earlier, these DVD camcorders seem to be a "shoot and watch" system. Shoot, maybe delete a few things (assuming you're using the DVD-RW discs), and finalize. Serious video editors may want to steer clear of DVD camcorders because of all these added steps."
Amen.
DP G5 (2GHZ) Mac OS X (10.4.3)

I can't import my photos from my digital camera (Sony) this problem is recent. I have imported photos without problem a problem before.

I can't import my photos from my digital camera (Sony) to my iPad, this problem is recent. I have imported photos without problem a problem before. Is this problem due to the IOS 6 update? How can I fix it?

I have the same problem and apple needs to fix this - but in the mean time you can manually select the vertical photos then "import - import selected" and you can get your verticals. We need a better fix. THIS IS A BUG!

Workaround for Canvas.removeCommand Sony Ericsson problem wanted

Is there a workaround for this problem (Sony Ericsson Phones)? http://developer.sonyericsson.com/message/47012 It's about Canvas.RemoveCommand. When I remove and add commands old commands are sometimes left in the list of commands on the right menu button. I have a Sony Ericsson K610i. I added more repaint();'s only resulting in a list of 5 commands. The list i supposed to be 2 commmands but I usually get 2 valid + 1 old command in the list at this stage in my midlet.

Well, I found a temporary solution. When you are having a conversation at iChat and want to leave it, don't close the conversation first, but try to close the headset pressing the button for a long time. The OS will get the message "Bluetooth Disconnected" but the next time the headset (open it again of course) will work!
Try it!

Sony HC39E - problem connecting

Wondering if anyone can help...?
According to the compatible list my handycam isn't compatible with a Mac. However, I received feedback from another user confirming that this model Sony will infact download footage to a Mac with a firewire cable...
I'm new to Macs and Apple in general, so finding this simple requirement quite a challenge especially since just finding out that posts get removed from file... so can't track back to that person who gave me advise.
Anyway, I now have a firewire cable which I bought on ebay. This plugs into the DV out port on the camera dock and obviously in firewire on the Mac. The Mac still doesn't register anything... So I'm a bit lost now and in need of some help as I don't know if there's something wrong with the cable... Apple support were of limited help before due to the model not being on their list.
Hoping someone out there can help...
Look forward to hearing back...
Many thanks
Kirsten

Kirsten, sorry to see that you havent resolve with connecting your camera to your computer.
The iLink cable is a firewire cable. Thats correct.
ANyway, this may be or may not be hardware problem. There is a thread on camera recognition problems due to Quicktime 7.
Bob Sidebotham, "Solution to camera recognition problems after upgrades.", 07:11pm Jun 15, 2005 CDT
But first you have to find out if your firewire cable is the culprit. Do you have another firewire cable to test?
I had exactly this same problem with camera recognition on both my Powerbook and my G5 desktop. & I thought it was my cable too.
I just had to delete my Quicktime reciepts and then re-install Quicktime.
Heres how,
http://docs.info.apple.com/article.html?artnum=301852
I also strongly suggest that you get the latest updates of FCP 5.0.3 and the latest Quicktime 7.0.3. and even Tiger 10.4.3
Hope this helps...
Hang in there...:)

Sony Receiver Problems

Hello I bought a Sony Home Receiver on 12/30/10 and purchased a 2 year warranty. I just wanted to know if any other home theatre receiver owners know what is going on with my product. Basically no matter which hdmi port I use on the receiver there random specs that pop on my television screen, I would describe it sort of like the white snow you would see on a television with no channel signal. I have eliminated that the hdmi cables, and the television is not at fault so I know the problem is with the receiver itself.

Okay my receiver has 4 hdmi ports (TV connection, Xbox, PS3, Cable Boix) so in all there are 4 hdmi cords being used.
-The PS3 is hooked to the HDMI Port labeled BD
-The XBox is hooked up to the HDMI port labeled DVD
-The cable is hooked up to the port labeled HDMI port labeled Sat/Cat
The first port that went out was the PS3 (port BD). My first solution was to take the HDMI end in the receiver and move it from the BD port to the DVD port (unhooking my Xbox hdmi cable). Turned on the PS3 and it worked fine out of that port. Eliminating that the HDMI cable or PS3 was the culprit.
Went on for a few days just switching my machines into the working HDMI inputs. Then the Sat/Cat port started having the same problem as the BD port, again switched it into the DVD input and it was fine. Even then tried another hdmi cord in the Sat/Cat hdmi input and their was still pixelation.
Finally another couple of days after that the DVD hdmi input went out and again did the same steps and got the same results.
So basically there have been several hdmi cables used and there is no way all 4 can be faulty, if so statistically unlikely. Also when the same cords are plugged directly into the television the picture is fine.
Hopefully the explanation was clear it is kind of hard to explain this stuff non-verbally. Thank you for responding.

DVD and internal Sony Drive problems

Hi,
I noticed that there were a few people having problems with writing DVD's so here's my problem to add to the list.
SONY DVD RW DW-U21A:
Firmware Revision: AADB
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No
I always use DVD-R.
This is the drive shipped with my mac and until a few weeks ago it worked fine. I then bought a batch of TDK DVDs (2x-16x speed) and none would write. Some of my older Sony DVDs wrote the same files absolutely fine. I thought it was a bad batch of TDK's and got my money back.
Now I've just bought some Imation discs (up to 16x compatible) and some BenQ (8x)- who make for a lot of large brand names. The Imations fail in every write and the BenQ's are fine.
As far as I know my drive is 8x compatible, so could this 16x compatibility be part of the problem even though the discs are meant to be able to be written at 8x, or is a firmware upgrade the way to go?
One more thing, the DVD shop asked me if I needed DVD's version 1 or 1.1. How would I find this out?
Any pointers in this direction would be most helpful if you reckon it is the 8x/16x thing as the lesser speeds are getting more difficult to come by.
dual 2gb G5 Mac OS X (10.4.7)
dual 2gb G5 Mac OS X (10.4.7)

Agreed -- we shouldn't be forced into buying new drives. I'm as frustrated as you are. Apple should work with Sony to get the firmware updates we need -- there should be no reason that the new 16x media can't be burned at 8x in our year-old G5 systems.
I tried again tonight with new 16x Fuji media in Studio Pro, and got the same error. However, some lower-end, big-box-computer-store 8x media burns just fine. As I type, I'm burning to some old Apple DVD 1x media I had lying around; it too is working just fine. Proves to me that it is only the newer 16x-capable media that fails in this drive (I think 5 different media vendors is enough to demonstrate this).
Did you also notice that it is (nearly) impossible to find brand-name 8x media in the stores today? I'd be happy if I could find that without mailorder. FYI -- a mailorder location where I have been successful is www.supermediastore.com -- I might have to order from them again.
I see that someone else has posted and mentioned macsales.com -- that is where I got the $43 price for the Pioneer burner.
I have no association with macsales.com or supermediastore.com -- just a satisfied customer in the past.
Herb

Macbook to Sony Bravia - Problems

Hey -
So I'm trying to connect my Macbook (I got this back in like 2006-2007?) to my Sony Bravia TV. I have the current set-up:
VGA Cable connected from the back of the TV to a Mini-DVI-to-VGA connector to the MacBook. When I plug it in, the Macbook detects it (since I can see the MacBook screen adjusting to it) but when I go to find it on the TV (Input/Source), the "PC" option is grayed out. I've been trying everything (Detect Display, etc) for the Bravia to detect it but no dice. Any help would be great.
For the time being, I'm using a S-Video to Mini-DVI-to-S-Video adapter to the MacBook but the quality is really poor (except when watching movies).
Is there something else that I need to do?
Thanks!
Albert

hello, people.
I'm trying to sync my mac to Sony Bravia as well.
And it was tough.
But on my last try I find a way.
You have to put a resolution 640 x 480 on your mac
and 1920 x 1080 on Sony TV.
After that, you have to go on menu of your TV and follow the steps:
ajustes > canais de entrada > controle de entradas
I know the names in portuguese.
But in english should be the same.
And set you PC from AUTO to "SEMPRE"
The TV is already set on AUTO (automatic)
It works and I really happy.
I wish it works for you too
Good luck

Intensity Pro output to Sony monitor problem

I'm monitoring the output from FCP 6.0.2 (OSX 10.5.2) on a MacPro, but the picture has a blue/desaturated colour cast to it (I get the same cast when outputting from Color & After Effects through the Intensity Card). Outputting to a Sony PVM 1454 via the Intensity PAL setting.
I've tested the monitor is OK by plugging the component output from my Canon XH A1 into the monitor via the R G B cables into the corresponding R/R-Y, G/Y and B/B-Y inputs on the monitor & it works fine (color is correct).
The interesting this is though, that the Intensity component cables out of the card are labelled '3R-Y OUT', '4 -Y OUT' and '10 AES/EBU OUT'.
'3R-Y OUT' is plugged into R/R-Y on the monitor
'4-Y OUT' is plugged into G/Y on the monitor
10 AES/EBU OUT' is plugged into B/B-Y on the monitor
Is this correct? I'm also getting (also lots of stripy diagonal lines across the screen).
(I've also tried other combinations of cables - this combination is the only one which gives me any picture at all)
I've checked that the monitor is set to component & that I've not got the monitor set to blue only!!!
Any ideas would be most welcome

Hello Simon,
I assume you're using an Intensity Pro (with Component I/O).
AES is for digital audio, it has nothing to do video.
Please see page 30 of the Intensity Pro manual for the component output connection diagram.
The AES cable should be gray/black.
The video component cables should be red, green and blue.
You also need to set the video output mode in the Intensity preference pane to "HDMI & Y, R-Y, B-Y".
Hope this helps.
Best regards, Oliver

Avchd sony sr11 problems importing it will not - help

i can see the mts files but they are sort of grey, no thumbnails and it never lets me select the file to import, what are the steps to follow and or what is up. tried full res and large size settings both, waited over 20 minutes for it to allow selection but gave up. have mixed res movies some 1920 some 1440 but no sd, some slow mo clips that are 240 frames per sec? problem? is there a third party software that does not require rendering to new for tgmat that will just work cause imovie08 is not compatable if you have to jump thru so many hoops. why cant i select the clips it sees thanks

thanks for joing in. may be a space problem or even a bad file, not sure , should work from what i have read. had trouble on ms machine too. will post back. thought someone else might have already run in to unable to select problem. guessing this means i could do it if there was not an issue. figuiring out the issue is problematic. later

DCR DVD703E Sony import problems:

Is there any new software known from Sony or has anyone worked their way around importing to imovie.
Asher Dee

iMovie is meant by concept to work with firewire connected miniDV camcorders...
meaning, usb2 and/or DVD as media is NOT supported by this software natively....
there are workarounds, often discussed on this forum:
a) finalize disks in camera (read manual)
b) don't stick miniDVDs into slot-in drives! if your disks are non-standard shaped, use an external dvd drive...
c) convert footage of DVD with one of the following solutions....:
* DVDxDV (free trial, 25$, Pro: 90$)
* Apple mpeg2 plugin (20$) + Streamclip (free)
* Cinematize >60$
* Mpeg2Works >25$ + Apple plug-in
* Toast6/7 allows converting to dv/import dvd, hit apple-k
using a software outside its specs means loss of convenience & simplicity …
and, what I've seen so far on my Mac, DVDcamcorders don't reach quality compared to miniDV, esp. after editing.... due to the nature of used mp2 compressor (which is a delivery format)
helpful?

Sony SP Problem

I cant seem to add people to my Skype call. I know you have to press the "+" button and it should say but it dosent say it on my Sony SP phone. Anyone why or am I doing it wrong?

repair your phone via SUS
that overheating less battery life is normally for some tays or a week that will fixed over time
Some will call me fatalist And some will call me freak
But hidden in my throwing fist The fortune that I seek-- Amon amarth

Sony SuperDrive Problem Alternative Drive?

Hi All, Like Many of you I received A Sony SuperDrive in my Newly Purchased Mac Pro. I swapped it over for My Sony AW-G170A as the 150D didn't support all formats. However Both drives are very noisey so I thought I would take the advice in a previous thread an purchase a Pioneer DVR-111D. Alas this was not to be as They are almost impossible to find in the UK, but I can purchase the Pioneer18x DVR-112D wich supports all the formats. before I buy this drive I wondered if any of you have one? and if so, is it as quiet as the 111D? I am presuming it's the newer model although i'm not sure. Your help would be much appreciated. Thanks in advance for your thoughts on this.
Regards Denisimo

I have to say, I've tried both a Pioneer DVR-112 and DVR-112D in my Mac Pro and neither work appreciably better, nor quieter, than the OEM DVR-111D that came from Apple.

Sony Headphones Problem

Hi - my favorite Sony headphones have a small fray in the wire and aren't working out of the right earphone. I don't know exactly which model they are but I know they are the expensive athletic/running headphones with the ear wrap and white outside with orange logo.
I'm hoping I can send these back to get repaired since they are the best running headphones I have ever owned and don't want to have too find a new pair or go buy the same pair new since they were so expensive.
Can a SonyMod let me know the best course of action to take?
Thanks!!
-David

Hello David and welcome to the Users Discussion Forum.
You can contact Sony support directly for service repair options.
http://esupport.sony.com/US/p/support-i ... nfo_id=932

Sony z1 probleme

Similar Messages

Maybe you are looking for