Sooooo who here didn't fall for the 12w sleeve for x220 :D
Lol I know I did, the x220 literally swims inside it!
Kinda wish I could get my money back and get a better one but eh, ill just pass it along to a relative or something.
Don't you guys think they should really take the link off the x220 customization pages?
I'm apart of that community and I was shocked to see that this is all they could come up with. In todays market with the different plastics available this to me is very quaint. Not appealing and to think they had a committee and designers and all that... it's truely disappointing!
Similar Messages
-
Why can I no longer, after having downloaded Lion, write accents and other diacriticals when in the Google, Yahoo, FaceBook, or even here in this post? The new method for getting at the "option" symbols works fine in other places like spotlight, but now even the older "option+letter" doesn't work in most places.
Chrome doesn't support the new accent/diacritics/macron chooser. I'm not sure about other browsers such as Firefox. You can use the old Option+letter combination that Doug suggested. Hopefully updates will solve these little incompatibilities shortly.
Neill -
25 apps on my wife's phone need updating and now it "Cannot connect to iTunes Store" only when i try to update them for her. I can access the iTunes store for all other options but not to update. How can I get her updated?
Try quitting the App Store:
Tap the home button to get to the home screen. Then double tap the home button, and hold your finger over the App Store icon. Tap the red when it appears. Tap the home button again to return to the home screen.
Try resetting:
Hold the home and power buttons at the same time until the Apple boot logo appears. No data will be lost. -
How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
When Charter Tech goes to your site, have them connect the modem up, but do not connect the modem to your iMAC or MacBook Pro. What you want to do is connect the Airport Extreme to the iMac or MacBook Pro first with the Ethernet Cable. You have to do this to configure via Airport Utility to set up the Base Station Name & Base Station Password.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple Tv, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.
WHAT TO DO IF YOUR AIRPORT EXTREME WAS PREVIOUSLY SET UP FOR USE WITH ANOTHER CARRIERS ROUTER OR MODEM.
NOTE: If you already had your Airport Extreme connected for example, I previously had ATT Uverse and the Airport Extreme was connected to the Wireless Router Model 3801HGV, I disabled the Uverse Wireless and used the Airport Extreme for the Wireless signal in bridge mode, as the Airport extreme Signal is much stronger than the Uverse router, and I was able to obtain a Wireless signal with the Airport Extreme way much better with no signal loss which was very very frustrating with the Uverse router.
Anyhow if you had it hooked up like this, now that you will be using it with the Charter ARRIS Modem TM902A, you will need to reset the Airport Extreme to clear out the old data it has in memory, with the previous set up otherwise it will not work. Trust me I spent 6 hours trying to make it work reading all Apple Support Community questions and answers relating to this type issue/problem others have been having trying to get their set up working. I tried all the tips, and I finally decided just to see if by chance I would be able to connect with someone with Charter Tech support who might be familiar with Apple to be able to assist me and by luck I did. He told me why it was not working and was all due the previous configuration with the ATT Uverse router was still in memory with the Airport Extreme. Finally it was 10:30 PM when I decided to call Charter Tech Support and I had been working on this since 3:00 pm pacific. I did not call them earlier as all the post I read said they never received any good help from Charter. After calling them I finished up by 11:00 PM and was able to finally connect Apple Tv, iMac, iPhones and Macbook Pro. We love our Apple Product and Happy all is connected with the new
Internet Provider Charter. I must say the speed is way way much better than it ever was with AT&T Uverse.
THIS IS WHAT YOU WILL NEED TO DO:
First you will need to unplug the Airport Extreme, then by taking the tip of a pen or paper clip end you need to push the reset button on the back of the Airport Extreme and hold it
down and at the same time plug the power cord back into the Airport Extreme count to 5 or 10 then release the reset button. Then once he light in front of the Airport Extreme stops blinking you need to plug the Ethernet cable from the Airport Extreme to your iMAC or Macbook Pro, and restart which ever one you have, then open the Airport Utility once it is back up. If you see airport extreme pop up with the old network name or it shows and yellow triangle click on the Airport Extreme ICON it will not let you configure it but will ask if you want to get rid of it or remove and just do it. Then Again restart your iMAC or MacBook Pro, open up Airport Utility again, and on the top left you should see under “Other Airport Base Stations” the MAC ID for the Airport Extreme.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple TV, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
I have a Linksys WRT320N I used for the initial Charter setup.
I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
Hasn't caused any issues so far but one thing I did notice.
On the Linksys there were 3 DNS servers listed.
The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
I tried everything above, but light on modem still flashes yellow.
I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO. -
Are you looking for the GP APIs for NW04s SP7? I've got them.
For those who are looking for the GP APIs for local development of webdynpro and background callable object with GP interface, I've got them and will submit a how-to to SDN if needed.
Just post your interest under this post and mention which SP (SP7 or below) you'd like them. Thanks, AndreWish granted. Here is the SDN link to the how-to document which include reference to the downloadable APIs. Enjoy!
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f7be53bb-0b01-0010-1c96-be3cb6799c1b
I've got a blog entry referencing that how-to link as well /people/andre.truong/blog/2006/06/26/working-with-the-apis-of-caf-guided-procedures-nwdi-or-local-development
Post comments there if you got any. Thanks, Andre -
Hi,
I have a file where fields are wrapped with ".
=========== file sample
"asdsa","asdsadasdas","1123"
"asdsa","asdsadasdas","1123"
"asdsa","asdsadasdas","1123"
"asdsa","asdsadasdas","1123"
==========
I am having a .net method to remove the wrap characters and write out a file without wrap characters.
======================
asdsa,asdsadasdas,1123
asdsa,asdsadasdas,1123
asdsa,asdsadasdas,1123
asdsa,asdsadasdas,1123
======================
the .net code is here.
========================================
public static string RemoveCharacter(string sFileName, char cRemoveChar)
object objLock = new object();
//VirtualStream objInputStream = null;
//VirtualStream objOutStream = null;
FileStream objInputFile = null, objOutFile = null;
lock(objLock)
try
objInputFile = new FileStream(sFileName, FileMode.Open);
//objInputStream = new VirtualStream(objInputFile);
objOutFile = new FileStream(sFileName.Substring(0, sFileName.LastIndexOf('\\')) + "\\" + Guid.NewGuid().ToString(), FileMode.Create);
//objOutStream = new VirtualStream(objOutFile);
int nByteRead;
while ((nByteRead = objInputFile.ReadByte()) != -1)
if (nByteRead != (int)cRemoveChar)
objOutFile.WriteByte((byte)nByteRead);
finally
objInputFile.Close();
objOutFile.Close();
return sFileName.Substring(0, sFileName.LastIndexOf('\\')) + "\\" + Guid.NewGuid().ToString();
==================================
however when I run the bulk load utility I get the error
=======================================
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 3 (NumberOfMultipleMatches).
==========================================
the bulk insert statement is as follows
=========================================
BULK INSERT Temp
FROM '<file name>' WITH
FIELDTERMINATOR = ','
, KEEPNULLS
==========================================
Does anybody know what is happening and what needs to be done ?
PLEASE HELP
Thanks in advance
VikramTo load that file with BULK INSERT, use this format file:
9.0
4
1 SQLCHAR 0 0 "\"" 0 "" ""
2 SQLCHAR 0 0 "\",\"" 1 col1 Latin1_General_CI_AS
3 SQLCHAR 0 0 "\",\"" 2 col2 Latin1_General_CI_AS
4 SQLCHAR 0 0 "\"\r\n" 3 col3 Latin1_General_CI_AS
Note that the format file defines four fields while the fileonly seems to have three. The format file defines an empty field before the first quote.
Or, since you already have a .NET program, use a stored procedure with table-valued parameter instead. I have an example of how to do this here:
http://www.sommarskog.se/arrays-in-sql-2008.html
Erland Sommarskog, SQL Server MVP, [email protected] -
Have a 7D Mark II and can't find a updater for the Raw conversion for Photoshop 6?
Have a 7D Mark II and can't find a updater for the Raw conversion for Photoshop 6?
I assume you mean Photoshop CS6?
I don't think your camera is supported.
Anyway here you'll find the info
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications -
windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is singned incorrectly or damaged, or that might be malicious software from unknown source (Code 52)
Hi,
What are you trying to do ? To help us answer question quicker, please read this:
http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to/Welcome-Get-started-here/td-p/699035
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
We use one ID for the Apps store for 2 iPhones. In the second profile on the Macit is impossible to update apps there is a mistake. What is the decision?
This happens when you both use the same Apple ID for iMessage. To fix this you have two choices:
On one of the phones go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign back in with a different ID. Note: you can still share the same ID for purchasing in Settings>iTunes & App Stores; or
On both phones go to Settings>Messages>Send & Receive and uncheck the email address(es) shown under "You can be reached by iMessage at". Also uncheck the other phone's phone number, if present. -
How to implement tooltip for the list items for the particular column in sharepoint 2013
Hi,
I had created a list, How to implement tooltip for the list items for the particular column in SharePoint 2013.
Any help will be appreciatedWe can use JavaScript or JQuery to show the tooltips. Refer to the following similar thread.
http://social.technet.microsoft.com/forums/en/sharepointdevelopmentprevious/thread/1dac3ae0-c9ce-419d-b6dd-08dd48284324
http://stackoverflow.com/questions/3366515/small-description-window-on-mouse-hover-on-hyperlink
http://spjsblog.com/2012/02/12/list-view-preview-item-on-hover-sharepoint-2010/ -
Error in "Checking Availabe Space for the DB2 UDB for Unix..." phase
Hello,
We are in the middle of an Upgrade proyect from R/3 4.6C (kernet 4.6D EXT) to ECC 6.0.
As a first step we are doing an Heterogenous System Copy to migrate from servers with HP-UX B11.11/Informix 9.4 to servers with AIX 5.3/DB2 UDB 8.
We already did the database import with no errors. When we are installing R3 4.6C in the target server we are getting u201CMemory Fault (coredump)u201D error in the u201CChecking Availabe Space for the DB2 UDB for Unix, Windows Tablespacesu201D phase.
Any advice will be appreciated.
Best Regards
FranciscoHello Paul,
There is no db2diag.log. We are in the first steps of the installation.
Operating System logs just shows an ABNORMALY TERMINATION OF SOTWARE error.
This is the CEDBMIG.log
INFO 2010-08-04 10:12:00 CommandFileController SyFileCopy:150
Copying source file CEDBMIG.R3S to target file CEDBMIG.R3S.30 ...
INFO 2010-08-04 10:12:01 Main
Preparation successfully completed.
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:434
checking host name lookup for 'sapqas'
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:473
offical host name for 'sapqas' is 'sapqas'.
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:541
host 'sapqas' has ip address '172.26.26.64'
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:581
offical host name for '172.26.26.64' is 'sapqas'.
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:434
checking host name lookup for 'sapqas'
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:473
offical host name for 'sapqas' is 'sapqas'.
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:541
host 'sapqas' has ip address '172.26.26.64'
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:581
offical host name for '172.26.26.64' is 'sapqas'.
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:434
checking host name lookup for 'sapqas'
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:473
offical host name for 'sapqas' is 'sapqas'.
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:541
host 'sapqas' has ip address '172.26.26.64'
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:581
offical host name for '172.26.26.64' is 'sapqas'.
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:434
checking host name lookup for 'sapqas'
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:473
offical host name for 'sapqas' is 'sapqas'.
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:541
host 'sapqas' has ip address '172.26.26.64'
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:581
offical host name for '172.26.26.64' is 'sapqas'.
INFO 2010-08-04 10:12:23 CDSERVERMIG_IND_DB6 InternalColdKeyCheck:0
The CD KERNEL will not be copied.
INFO 2010-08-04 10:12:23 CDSERVERMIG_IND_DB6 InternalColdKeyCheck:0
The CD RDBMS will not be copied.
INFO 2010-08-04 10:12:23 CDSERVERMIG_IND_DB6 InternalColdKeyCheck:0
The CD EXPORT1 will not be copied.
INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SyCoprocessCreate:300
Creating coprocess /usr/sbin/lsattr -El sys0 -a realmem ...
INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SyRamSizeGet:100
The process lsattr puts out:
realmem 8388608 Amount of usable physical memory in Kbytes False
INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SyRamSizeGet:700
Physical RAM size is 8192 MB.
INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SySwapGetSize:100
Retrieving swap space size ...
INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SyCoprocessCreate:300
Creating coprocess /usr/sbin/lsps -s ...
INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SySwapGetSize:150
The process lsps puts out:
Total Paging Space Percent Used
INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SySwapGetSize:150
The process lsps puts out:
8192MB 1%
INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SySwapGetSize:500
Currently activated swap space is 8192 MB.
INFO 2010-08-04 10:12:31 CENTRDBINSTANCE_IND_DB6 InternalWarmKeyCheck:0
The installation phase is starting now. Please look in the log
file for further information about current actions.
INFO 2010-08-04 10:12:31
Requesting Installation Details
INFO 2010-08-04 10:12:31
Reading and Checking DB2 UDB for UNIX, Windows Specific Keys
INFO 2010-08-04 10:12:31
Select the DB2 Storage Management.
INFO 2010-08-04 10:12:31
Choose the number of storage paths for DB2's Automatic Storage
Management.
INFO 2010-08-04 10:12:31 CDSERVERMIG_IND_DB6 InternalWarmKeyCheck:0
The CD KERNEL will not be copied.
INFO 2010-08-04 10:12:31 CDSERVERMIG_IND_DB6 InternalWarmKeyCheck:0
The CD RDBMS will not be copied.
INFO 2010-08-04 10:12:31 CDSERVERMIG_IND_DB6 InternalWarmKeyCheck:0
The CD EXPORT1 will not be copied.
INFO 2010-08-04 10:12:31
Requesting Information on CD-ROMs
INFO 2010-08-04 10:12:31
Calculating RAM Distribution
INFO 2010-08-04 10:12:31
Creating the Service Entry for the Dispatcher
INFO 2010-08-04 10:12:31
Creating the Service Entry for the Gateway Service
INFO 2010-08-04 10:12:31
Creating the Service Entry for the Secure Gateway Service
INFO 2010-08-04 10:12:31
Creating the Service Entry for the Message Server
INFO 2010-08-04 10:12:31
Creating the SAP Administration Group sapsys
INFO 2010-08-04 10:12:32
Creating the Database Administration Group db<dbsid>adm
INFO 2010-08-04 10:12:32
Creating the Group db<dbsid>ctl
INFO 2010-08-04 10:12:32
Creating the Group db<dbsid>mnt
INFO 2010-08-04 10:12:32
Creating the SAP connect user
INFO 2010-08-04 10:12:32
Setting Password of the SAP connect user
INFO 2010-08-04 10:12:32
Creating the db2<sapsid> User
INFO 2010-08-04 10:12:32
Setting the User Password
INFO 2010-08-04 10:12:32
Creating the SAP System Administrator
INFO 2010-08-04 10:12:32
Setting Password for for the SAP System Administrator
INFO 2010-08-04 10:12:32
Creating Directories
INFO 2010-08-04 10:12:32
Creating Symbolic Links
INFO 2010-08-04 10:12:32
Getting Minimal Size of the Database
INFO 2010-08-04 10:12:32
Changing DB2 UDB for UNIX, Windows Tablespace Data
INFO 2010-08-04 10:12:32
Checking if Required Directories Exist
INFO 2010-08-04 10:12:32
Checking Available Space for the SAP Instance
INFO 2010-08-04 10:12:32
Checking Available Space for the DB2 UDB for UNIX, Windows
Tablespaces
This is the CEDBMIG.R3S log
120_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/SAPSRC.CSH
130_SOURCE=@DB_HOME@/.cshrc
130_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/DBSRC.CSH
200_SOURCE=@DB_HOME@/.profile
200_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/SAPSRC.SH
210_SOURCE=@DB_HOME@/.profile
210_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/DBSRC.SH
[Z_OSUSERSIDADMENVIRONMENT_IND_DB6]
100_GROUP=sapsys
100_OWNER=@LOWER_SAPSYSTEMNAME@adm
100_PERMISSION=0644
100_SOURCE=@HOME@/.login
100_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/SAPSRC.CSH
110_SOURCE=@HOME@/.login
110_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/DBSRC.CSH
120_GROUP=sapsys
120_OWNER=@LOWER_SAPSYSTEMNAME@adm
120_PERMISSION=0644
120_SOURCE=@HOME@/.cshrc
120_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/SAPSRC.CSH
130_SOURCE=@HOME@/.cshrc
130_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/DBSRC.CSH
200_SOURCE=@HOME@/.profile
200_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/SAPSRC.SH
210_SOURCE=@HOME@/.profile
210_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/DBSRC.SH
[Z_R3DIRECTORIES_IND_IND]
101_PATH=@SAPDIR@
101_PERMISSION=0775
101_SET_FILE_ATTRIBUTES=YES
101_USERGROUP=sapsys
101_USERNAME=@LOWER_SAPSYSTEMNAME@adm
102_PATH=@SAPDIR@/tmp
103_PATH=@SAPDIR@/trans
104_PATH=@SAPDIR@/trans/tmp
104_SET_FILE_ATTRIBUTES=NO
105_PATH=@SAPDIR@/trans/EPS
106_PATH=@SAPDIR@/trans/EPS/in
107_PATH=@SAPDIR@/trans/EPS/out
108_PATH=@SAPDIR@/trans/EPS/log
109_PATH=@SAPDIR@/trans/bin
110_PATH=@SAPDIR@/trans/buffer
111_PATH=@SAPDIR@/trans/cofiles
112_PATH=@SAPDIR@/trans/data
113_PATH=@SAPDIR@/trans/etc
114_PATH=@SAPDIR@/trans/log
115_PATH=@SAPDIR@/trans/sapnames
120_PATH=@SAPDIR@/@SAPSYSTEMNAME@
120_PERMISSION=0751
120_SET_FILE_ATTRIBUTES=YES
121_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS
121_PERMISSION=0755
122_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS/exe
123_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS/exe/opt
124_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS/gen
125_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS/gen/opt
126_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS/gen/dbg
127_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS/src
128_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@
129_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@/data
130_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@/log
131_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@/work
131_PERMISSION=0775
132_PATH=@SAPMOUNT@
140_PATH=@SAPMOUNTEXE@
141_PATH=@SAPMOUNTPROFILE@
141_PERMISSION=0755
142_PATH=@SAPMOUNTGLOBAL@
142_PERMISSION=0700
150_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@/sec
160_PATH=@STARTDIRECTORY@
160_PERMISSION=0777
[Z_R3DIRPERMISSIONS_IND_IND]
101_CHANGE_ON_NFS=NO
101_PATH=@SAPMOUNT@
101_PERMISSION=0755
101_TRAVERSE=
101_USERGROUP=sapsys
101_USERNAME=@LOWER_SAPSYSTEMNAME@adm
102_CHANGE_ON_NFS=NO
102_PATH=@SAPMOUNTEXE@
102_PERMISSION=0755
102_TRAVERSE=
102_USERGROUP=sapsys
102_USERNAME=@LOWER_SAPSYSTEMNAME@adm
103_CHANGE_ON_NFS=NO
103_PATH=@SAPMOUNTGLOBAL@
103_PERMISSION=0710
103_TRAVERSE=
103_USERGROUP=db@LOWER_DB_SID@adm
103_USERNAME=@LOWER_SAPSYSTEMNAME@adm
104_CHANGE_ON_NFS=NO
104_PATH=@SAPMOUNTPROFILE@
104_PERMISSION=0755
104_TRAVERSE=
104_USERGROUP=sapsys
104_USERNAME=@LOWER_SAPSYSTEMNAME@adm
105_CHANGE_ON_NFS=NO
105_PATH=@SAPDIR@/@SAPSYSTEMNAME@
105_PERMISSION=0755
105_TRAVERSE=
105_USERGROUP=sapsys
105_USERNAME=@LOWER_SAPSYSTEMNAME@adm
120_CHANGE_ON_NFS=NO
120_PATH=@HOME@
120_PERMISSION=0700
120_TRAVERSE=
120_USERGROUP=sapsys
120_USERNAME=@LOWER_SAPSYSTEMNAME@adm
121_CHANGE_ON_NFS=NO
121_PATH=@HOME@
121_PERMISSION=0777
121_TRAVERSE=FILES
121_USERGROUP=sapsys
121_USERNAME=@LOWER_SAPSYSTEMNAME@adm
130_CHANGE_ON_NFS=NO
130_PATH=@STARTDIRECTORY@
130_PERMISSION=0777
130_TRAVERSE=
130_USERGROUP=sapsys
130_USERNAME=@LOWER_SAPSYSTEMNAME@adm
140_CHANGE_ON_NFS=YES
140_PATH=@SAPDIR@/trans
140_PERMISSION=0775
140_TRAVERSE=
140_USERGROUP=sapsys
140_USERNAME=@LOWER_SAPSYSTEMNAME@adm
141_CHANGE_ON_NFS=YES
141_PATH=@SAPDIR@/trans/bin
141_PERMISSION=0775
141_TRAVERSE=
141_USERGROUP=sapsys
141_USERNAME=@LOWER_SAPSYSTEMNAME@adm
[Z_R3FILEPERMISSIONS_IND_IND]
101_CHANGE_ON_NFS=NO
101_PATH=@SAPMOUNTEXE@
101_PERMISSION=0755
101_TRAVERSE=SUBDIRECTORIES
101_USERGROUP=sapsys
101_USERNAME=@LOWER_SAPSYSTEMNAME@adm
102_CHANGE_ON_NFS=NO
102_PATH=@SAPMOUNTEXE@
102_PERMISSION=0755
102_TRAVERSE=FILES
102_USERGROUP=sapsys
102_USERNAME=@LOWER_SAPSYSTEMNAME@adm
103_CHANGE_ON_NFS=NO
103_PATH=@SAPMOUNTGLOBAL@
103_PERMISSION=0700
103_USERGROUP=sapsys
103_USERNAME=@LOWER_SAPSYSTEMNAME@adm
104_CHANGE_ON_NFS=NO
104_PATH=@SAPMOUNTPROFILE@
104_PERMISSION=0755
104_TRAVERSE=SUBDIRECTORIES
104_USERGROUP=sapsys
104_USERNAME=@LOWER_SAPSYSTEMNAME@adm
105_CHANGE_ON_NFS=NO
105_PATH=@SAPMOUNTPROFILE@
105_PERMISSION=0755
105_TRAVERSE=FILES
105_USERGROUP=sapsys
105_USERNAME=@LOWER_SAPSYSTEMNAME@adm
106_CHANGE_ON_NFS=NO
106_PATH=@SAPMOUNTEXE@/saposcol
106_PERMISSION=04755
106_USERGROUP=sapsys
106_USERNAME=root
112_CHANGE_ON_NFS=NO
112_PATH=@SAPDIR@/@SAPSYSTEMNAME@
112_PERMISSION=0751
112_TRAVERSE=SUBDIRECTORIES
112_USERGROUP=sapsys
112_USERNAME=@LOWER_SAPSYSTEMNAME@adm
113_CHANGE_ON_NFS=NO
113_PATH=@SAPDIR@/@SAPSYSTEMNAME@
113_PERMISSION=0751
113_TRAVERSE=FILES
113_USERGROUP=sapsys
113_USERNAME=@LOWER_SAPSYSTEMNAME@adm
114_CHANGE_ON_NFS=NO
114_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS
114_PERMISSION=0755
114_TRAVERSE=SUBDIRECTORIES
114_USERGROUP=sapsys
114_USERNAME=@LOWER_SAPSYSTEMNAME@adm
115_CHANGE_ON_NFS=NO
115_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS
115_PERMISSION=0755
115_TRAVERSE=FILES
115_USERGROUP=sapsys
115_USERNAME=@LOWER_SAPSYSTEMNAME@adm
116_CHANGE_ON_NFS=NO
116_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@
116_PERMISSION=0755
116_TRAVERSE=SUBDIRECTORIES
116_USERGROUP=sapsys
116_USERNAME=@LOWER_SAPSYSTEMNAME@adm
117_CHANGE_ON_NFS=NO
117_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@
117_PERMISSION=0755
117_TRAVERSE=FILES
117_USERGROUP=sapsys
117_USERNAME=@LOWER_SAPSYSTEMNAME@adm
118_CHANGE_ON_NFS=NO
118_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@/work
118_PERMISSION=0775
118_USERGROUP=sapsys
118_USERNAME=@LOWER_SAPSYSTEMNAME@adm
120_CHANGE_ON_NFS=NO
120_PATH=@HOME@
120_PERMISSION=0700
120_USERGROUP=sapsys
120_USERNAME=@LOWER_SAPSYSTEMNAME@adm
121_CHANGE_ON_NFS=NO
121_PATH=@HOME@
121_PERMISSION=0700
121_TRAVERSE=FILES
121_USERGROUP=sapsys
121_USERNAME=@LOWER_SAPSYSTEMNAME@adm
[Z_R3LINKS_IND_IND]
101_LINKCONTENT=@SAPMOUNTEXE@
101_LINKNAME=@SAPDIR@/@SAPSYSTEMNAME@/SYS/exe/dbg
102_LINKCONTENT=dbg
102_LINKNAME=@SAPDIR@/@SAPSYSTEMNAME@/SYS/exe/run
103_LINKCONTENT=@SAPMOUNTGLOBAL@
103_LINKNAME=@SAPDIR@/@SAPSYSTEMNAME@/SYS/global
104_LINKCONTENT=@SAPMOUNTPROFILE@
104_LINKNAME=@SAPDIR@/@SAPSYSTEMNAME@/SYS/profile
[Z_SAPDATAPATH]
S1=/db2/@SAPSYSTEMNAME@/sapdata1
S2=/db2/@SAPSYSTEMNAME@/sapdata2
S3=/db2/@SAPSYSTEMNAME@/sapdata3
S4=/db2/@SAPSYSTEMNAME@/sapdata4
S5=/db2/@SAPSYSTEMNAME@/sapdata5
S6=/db2/@SAPSYSTEMNAME@/sapdata6
SAPDATAT=/db2/@SAPSYSTEMNAME@/sapdatat
As you can see there is not an error message, the installation simply stops when the try to check the space available for tablespaces.
Regards -
I get this message when I check the Device manager for my Ipod
Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)
How do I resolve this I have reinstalled iTunes but it still doesn't recognise my ipodI reinstalled Itunes a couple of times. I unistalled all programs that I never use, I updated all of my drivers, Windows swept my computer and found no problems. I have a yellow causion lite when I look at the USB-port with the phone connected. All other devices work without a problem.
-
I have a new Samsung phone and I live in CT. Last month they charged me $38 on my bill for the sales tax for the new phone which was $600. I'm paying for the phone itself over 20 installments of $30 each. Now again I'm getting that same $38 charge. I can't believe that the monthly CT tax is higher than the payment for the phone itself. Does this make sense. Last time I spoke with them on the phone it was for 1 1/4 hours for something simple. I don't want to call unless I need to. The salesman told me nothing about any of this. Thank you for any help you can offer.
The bill from last month states:
CT state sales tax** $38.10
** In some states sales tax or surcharges are calculated on the full cost of the full retail price or VZW cost of the device you purchased and not on the discounted price you pay. The sales tax or surcharges charged on your device was based on $599.99 and appears on this first bill.
The current bill says the same.
Actually, now I'm realizing that last month's bill stated I was making the first payment toward the phone. Now this month also says it's the first payment toward the phone when it's really the second. -
I need to find the correct part number for the ac-charger for hp mini 110-1191eo (part vj213ea#uuw).
This question was solved.
View Solution.Good question.
That I don't have a definite 100% answer to.
It probably is OK. Wattage is what it is rated at. More wattage is probably a good thing, and I have read that = or - .5v is not supposed to be an issue.
You can do a google search of the part number for your power adapter and see if they still carry it, if you are concerned.
Paul -
Can i have the HTMLB Code for the background color for a screen?
Hi friends,
Can i have the HTMLB Code for the background color for a screen?
moosaHi:
you can put like
<table width="100%" height="100%" cellspacing="1" cellpadding="2" border="0">
<tr class="sapTbvCellStd"> <td bgcolor="#B1E1D2" valign="top">
Regards
Shashi
Maybe you are looking for
-
Hi, I have upgraded the analytics environment 7.8 to OBIEE 10.1.3.3.2. I have configured the OBI Presentation Services to identify the credential store : extract from instanceconfig.xml : <CredentialStore> <CredentialStorage type="file" path="F:\sas7
-
Here is my class for a sliding panel. The class is released as open source. Please feel free to feed this into your IDE and provide feedback for improvement. Known issues include: double clicking the component2 to be shown, some flickering in graphic
-
How do I deal with an .exe file which arrived from a known contact but the text looks very suspicious? Because of time difference I can't yet contact the person. Does Skype have a Security Center which might be able to investigate such files? Thanks
-
I can't open certain internet pdf's?
I can't open certain internet pdf's?
-
Installation of Premiere elements 4 never finishing on Win 8
All in title I put the CD, launch the Install, but when it will finish, it de-installs all... regards JP