SOP Confituration- Maintain Copy Profiles version A00 not maintained

Hi Gurus
While configuring Maintain copy profiels (SOP) and trying to input A00 in Target Version field in develpment server
Iam finding following error
"Entry  A00  does not exist in P44V (check entry"
"Input values must be defined in Table P44V. The value or values ' A00 '
are not specified in this table."
Iam not fining any img path or TC path to configure this A00
Your earlier response is highly appreciated
thanks
K.Prabakaran

Hi Prapakaran
A00 is active version
what we need to do is create inactive version say 001 or 010 anything and forcast sales plan or production plan
creat sales plan in MC87 and then goto MC88 make this inactive plan to active plan which system automatically takes to A00
hope this will solve your problem
Thanks
Bala

Similar Messages

  • Flexible SOP maintain copy profiles

    we developed  two SOP table for zone wise and Plant wise with the Planninig Method Level by level Planning. when I am trying to create copy profile to copy one key figure from zonewise table to Plant wise table  an error is coming "Copying not supported for this combination of planning methods
    ",  can you please any body to help me resolve this issue.

    Hi Prapakaran
    A00 is active version
    what we need to do is create inactive version say 001 or 010 anything and forcast sales plan or production plan
    creat sales plan in MC87 and then goto MC88 make this inactive plan to active plan which system automatically takes to A00
    hope this will solve your problem
    Thanks
    Bala

  • Local client copy profile SAP_CUSV: Configuration not working

    Dear Experts,
    My configuration client is 350 and my new client is 100 in same DEV system. Client 100 is copied from client 000 with profile SAP_ALL. Then I created a local copy from 350 using profile SAP_CUSV into same client 100. After that I am facing issues under HCM module. All the HCM configuration that works well in 350 does not work in client 100 even the standard header configuration of PA30 does not work. All the customizing entries are however present in HCM configuration tables but system seems not to read anything from HCM configuration. Apart from screen headers, the configuration done by consultant also has conflicts and system shows an error to maintain entries in tables which are already maintained and visible in configuration tables in 100. An example of error in which system gives error of maintaining Payscale Type and Payscale Area in table T510 is attached where as the entries are maintained in given table.
    Best Regards,

    Hi,
    Please check the following notes.
    1946003 - Client copy completed with Dictionary error
    1171306 - Error with pooled tables when copying a client
    686357 - Table pool has incorrect length following Unicode conversion
    Please close the thread if this address your issues.
    Thanks 
    Adil

  • CONTROL DATA FOR ACTIVITY TYPE NOT MAINTAINED

    dear all
    i get this error when calculating production order cost
    control data for activity type 1000\4230\1420 not maintained for fiscal year 2007
    i hv maintained data in kp26
    can any one pl help. i am learnign sap pp and hv 4.7 version
    thanks and regards

    Dear Anshuman
    my prob. started during cost cal. in prod. order first error was version 0 not maintained for fiscal year 2007, THEN i maintained it in the path as told by you T code OKEQ.
    but after that error changed to CONTROL DATA FOR ACTIVITY TYPE NOT MAINTAINED ( 1000/4230/1420)
    i maintained data in kp26, but the error is still coming
    pl. suggest some solution as i am not able to proceed further.
    Thanks and regards
    Raj

  • Archive purchase document  log -  Retention period not maintained

    Hello Everybody,
       I have been trying to archive the Purchase document, I have also set the Retention period is 0 (Zero), but  when i archive the some Purchase document, it is give log like that
    Object                                                     Message
    4700000053 00010                                           Retention period not maintained
    4700000066 00010                                           Retention period not maintained
    4700000079 00010                                           Retention period not maintained
    So please suggest me how to solve the problem
    Thanks

    Solved, by archiving

  • EDI partner profile not maintained.

    I am currently working on BI 7 and on trying to install ODS from BC its giving me error that
    <b>EDI partner Profile is not maintained.</b>
    Can somebody please send me the documents on how to maintain EDI partner profile for transferring data from ODS to Infocube.

    Hi Amit,
    EDI partner profile is maintained using Tcode WE20.
    YOu need to select LS (Logical System ) and your Source System.
    And maintain Inbound and Outbound parameters here.
    Check OSS Note 886102 - System Landscape Copy for SAP BW 2.X, 3.X and NW2004s BI
    Step 6.8: Reactivate all partner profiles that carry the new logical system name after renaming
    Execute Transaction WE20 to reactivate the partner profiles. Choose "Partner type LS (logical system)"  enter the logical system name of the partner  in tab "classification", change the  partner status from "I" (inactive) to "A" (active) and save.
    Hope this Solves your problem
    Thanks
    Ck

  • Partner profile not maintained error while testing inbound processing

    Hi gurus,
    I am trying to upload a customer master data using LSMW idoc method, I followed all the required steps and then I tried to test the inbound processing using T.code we19 and there i gave my basic type as debcor01 and I clicked on standard inbound test but it gives me an error which says partner profile is not maintained, but I have maintained the partner profile and assigned the same in LSMW. So anyone of you can please help me to solve this problem.
    thanks,
    Rajeev

    Rajeev,
    Check whether the Account  Category is mantained properly or not.
    K.Kiran.

  • "error no:58" partner profile not maintained in idoc.

    Hi to all,
             i am new member to this site already searched forums for solution.
    can anyone help us out to solve the following error while simulating inbound idoc.Error:58 " partner profile not maintained"
    we tried with msg type CREMAS and DEBMAS.created partner profiles,rfc connection as procedural but same error results.
    also give some useful links to process idocs.
    we want ur valuable suggestions,thanks in advance.
    regards
       vinoth

    Hi,
    link for inbound idocs is given below
    [http://help.sap.com/saphelp_46c/helpdata/en/78/2174b051ce11d189570000e829fbbd/content.htm|http://help.sap.com/saphelp_46c/helpdata/en/78/2174b051ce11d189570000e829fbbd/content.htm]
    [http://sapdocs.info/sap/abap/idoc-useful-notes/http://www.scribd.com/doc/24447/SAP-R3-IDoc-Cookbook-for-EDI-and-Interfaces-by-Axel-Angeli|http://sapdocs.info/sap/abap/idoc-useful-notes/http://www.scribd.com/doc/24447/SAP-R3-IDoc-Cookbook-for-EDI-and-Interfaces-by-Axel-Angeli]
    [http://www.riyaz.net/blog/beginners-guide-to-ale-and-idocs-part-ii/|http://www.riyaz.net/blog/beginners-guide-to-ale-and-idocs-part-ii/]
    [http://www.riyaz.net/blog/beginners-guide-to-ale-and-idocs-part-iii/|http://www.riyaz.net/blog/beginners-guide-to-ale-and-idocs-part-iii/]
    Please check in the receiver side if the partner profile is configured correctly.
    Go through the link below in order to maintain partner profile.
    [http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b80b543d711d1893e0000e8323c4f/content.htm|http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b80b543d711d1893e0000e8323c4f/content.htm]

  • Partner profile not maintained

    hi,
       i am trying to create custom idoc.To trigger idoc i am using we19 instead of writing a program.now my problem is that we19 genrate idoc with error "Partner Profile not Maintained".Although i have create partner,port.but in we19 it is not showing any entry in partner number,partner typ.,and partner role.therfor it is giving this error.but i don't know how to put entry in this field.
    Regards,
    Vaneet

    Hi ,
    It simply means that partner profile has not been maintained correctly.
    Please check once again in WE20.
    Also check once again all the steps required for successful IDoc creation, e.g creation of logical systems(ALE process), maintenance of customer distribution model etc.
    Regards,
    Raveesh

  • Partner Profile not maintained - WE19

    Hi! All
    when I'm trying to test IDOC in WE19 its saying Partner Profile not maintained while clicking "Start inbound".
    But I'm able to see the partner profile in WE20 with the created Message type and port.
    whats wrong i have done.
    Regards,
    Kv

    Thanks for your reply.
    Updated the Profile details to EDIDC.
    after updating while click "Start outbound processing" it says
    Doc 0000000000133004 was saved but cannot or should not be sent with waring symbol.
    whats the mistake i have done.

  • Inforecord Rounding Profile error- RP not defined eventhough it is maintain

    Dear Gurus,
    I have maintained the Rounding Profile in the transaction OWD1. Yet, the inforecord does not display it in the dropdown list and I am getting the error 'Rounding Profile not defined in Plant'.
    Request your help in solving this.
    Regards,
    Sathish Kumar

    hi
    check out this spro path
    Materials Management --> Consumption-Based Planning --> Planning --> Lot-Size Calculation -->> Maintain Rounding Profile
    also check whether you entered any plant in that field.
    Edited by: AP on Mar 7, 2012 11:16 AM

  • Error: Lock profile for approval procedure not maintained in Customizing

    Hi,
    We are working on the CHARM approval process. I have noticed that without selecting an approval procedure, I select the status (Awaiting business approval) on which the approval workflow is triggered, the system gives below error:
    Select an approval procedure first
    Lock profile for approval procedure not maintained in Customizing
    Approval procedure and approval steps are locked automatically
    This locks the approval procedure and the RFC can no longer be processed further. Why is that happening ? Anyone can select the status by mistake and lose the RFC, is there a way to stop this or at least reset it ? the lock procedure is already maintained in approval procedure customizing.
    Best Regards.

    Hi Karthik,
    Thanks for the quick reply, however the settings mentioned on page 38 are already in place i.e. the approval procedure gets determined correctly based on change category (rule policy) and also is locked after putting it to 'Awaiting Approval' 
    But the problem exists - setting the status 'Awaiting App.' without selecting app.proc, will result in a total lock of the RFC.

  • Problem connecting to internet via Firefox as XUL Runner Error Platform version is not compatible with minVersion 1.9.2.16 max version 1.9.2.16

    Firfox requested to update previous version to new version of which i allowed. After installation complete i tried to connect to the internet and was denied with a following error window appearing. As explained above i shall explain again as shown in the error window.
    XULRunner
    Error: Platform version " is not compatible with
    minVersion >= 1.9.2.16
    maxVersion<= 1.9.2.16
    This will not allow me to connect to the internet as i would like to continue to.
    Please restore if possible my previous toolbar and able for me to connect to the internet.
    Thank you.

    This issue can happen when the updater wasn't able to update all files in the Firefox program folder.
    Do a clean (re-)install:
    * Download a fresh Firefox copy and save the file to the desktop.
    * Firefox 4.0: http://www.mozilla.com/firefox/all.html
    * Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
    * Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    * Don't remove personal data if you uninstall the current version.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

  • Error in TLB background job"Version does not exist"

    Hi Gurus,
    We are getting error of "Version does not exist " in TLB background run..The T-lane is between 2 DCs .we have checked everything but unfortunately
    we are not able to detect the root cause for the error.
    Your help will be appreciated.
    Thanks in advance
    Suyash

    Hi Suyash,
    I hope than your planning version is active!
    I also suppose than you have maintained mean of transport and products at Tr.Lanes level. 
    I think that you have some master data inconsistency in the version.
    Please run the reports; /SAPAPO/OM17, /SAPAPO/TSCONS, /SAPAPO/TSLCREORGSNP
    You can also run Model Consistency check (t.code /SAPAPO/CONSCHK). First you have to define the Model (t.code /SAPAPO/SCC07) and the Profile (t.code /SAPAPO/CONSPRF).
    Thanks, Marius

  • Copied profiles from old to new, now i get 'A copy of Firefox is already open. Only one copy of Firefox can be open at a time.'

    admitting defeat! after copying profiles from old computer to new one i can't get firefox to launch. says it's already open. i have gone as far as deleting the application, along with the cache and profiles and emptying the trash. then downloaded new version and same thing. obviously i'm forgetting something. have been out of the loop for a while... thanks for any help. :)

    If you restored or copied a profile folder and not the corresponding file [http://kb.mozillazine.org/profiles.ini_file profiles.ini] then you need to use the Profile Manager to create a new profile and choose the location of the restored profile as the location of the new profile (Choose Folder).
    See http://kb.mozillazine.org/Recovering_a_missing_profile

Maybe you are looking for