SOP for transporting deployed VC model in 3 systems EP landscape

Hi experts,
I have a question which I hope to find answers.
My company adopts a 3 system landscape for both backend R/3 ECC6 and EP on NW04s.
Is there any standard operations procedures as to how we should transport the Visual Composer applications?
If there are any documentations, appreciate if you'd share it with me.
Currently, my Portal Admin creates a transport package and transport via the Content Adminstration page in the below sequence:
1) Develop in Visual Composer Storyboard in Development Server
2) Deploy to Development Server's Portal PCD Directory
3) Portal Admin creates transport package and request and transports it to QA Portal
4) Upon passing UAT, portal admin will create transport request and transports it to Production Portal.
Useful answers that answers my questions will be rewarded with points.
Thank you.
Regards,
Damien

Hi,
yes that is only way to Transport the Visual Composer models of VC7.0 .
In PCD of portal you will get the XML and its related info that
that will be converted to Business packages.
but this problems are not there with Visual Composer 7.1 i.e Composite Environment.
there we can creat the models directly under DTR so any body can take it form there and aplly thier applications.
Regards,
Govindu

Similar Messages

  • Promoting Changes of Distrbution model to production system

    Hi Experts,
                    There is need for changing the distribution model in production system, if we promote the distribution model from development system, we have to run BDLS to change the sender and partner names. But this requires down time of production system, which we dont want to take. And we cant run BDLS when the transaction are carrying out by users. Please suggest the best way to promote the changes of distribution model to production system..
    Cheers,
    Prasanna

    The only other way I can think of is make BD64 related table directly maintainable in Production so it will allow changes in Production system.
    You can get the table names to update from your tranport request that you are planning to move to production.
    I think thats the way systems are generally configured because of the Issues you are facing.
    Regards
    Shital

  • SOP for SDLC in ESOA

    My existing development is mainly on .NET environment. The previous development works do not follow any good SDLC model. As a result, the developed application is always hard to maintain. Now, the turning point is in front of me. I would like to spend a few months of time with my colleague to redevelop our development standard.
    The objectives are:
    - Introduce proper communication
    - Increase code readability
    - Improve code continuity
    During this switch, we are also planning to switch to the NetWeaver platform. As we believe the single platform should reduce our TCO.
    We are aware that many enterprises have their SOP for different areas. Are there any SOP for SDLC that we can reference to? We are especially interested if SAP does provide a SOP guideline for its ESOA.
    I am in a very confused stage. As my team has no hand-on experience with ESOA development. At the mean time, we are requested to develop such SOP for SDLC. It would be great if there is some hints for us.
    Thanks in advance!

    Hi,
    yes that is only way to Transport the Visual Composer models of VC7.0 .
    In PCD of portal you will get the XML and its related info that
    that will be converted to Business packages.
    but this problems are not there with Visual Composer 7.1 i.e Composite Environment.
    there we can creat the models directly under DTR so any body can take it form there and aplly thier applications.
    Regards,
    Govindu

  • Reg: Error while deploying the Model

    Hello All,
    I developed a Model in the VC.
    The compilation of the model was successful.
    But when I tried to deploy the model I'm getting an Error message saying :
    "Error in executing a process for Flex compilation, Not enough space" .
    Can anyone tell me what to do to resolve this problem ?
    Regards,
    Deepu.K

    Hi colleagues,
    We also encountered this problem here at our customer´s system .
    We told the basis administrators to increase the disk space which did not solve our problem, though.
    After successfully compiling the vc model
    Deploying with FLEX2 results in an error as follows:
    "Process is not executed!"
    while deploying with flex1 resulits in the error
    "Error in executing a process for Flex compilation, Not enough space"
    Since everything has been working smoothly for the last months until now,
    we wonder how this error has suddenly occured.
    Does anyone have an idea how to trace the error or has anyone encountered this error, too?
    Thanks in advance!
    Gideon

  • Java Script Error while deploying a Model with Value Help

    Hi,
    I am using EP 7.0 SP 10.
    I am trying to deploy a model which includes the Value Help for an Input field, and i am trying to deploy this model.
    The model compiles successfully, but gives a Java Script Error while deploying the model,
    ! Error on Page
    When Click on this java script error, it shows that ,
    Line:14985
    Char 1: Error
    object does n't support this property or method.
    code
    URL: <serverhost>/VCRes/WebContent/VisualComposer6.0/bin/223334.htm?24102006.1712.
    The Same model works in dev server, and it fails in the production server.
    Thanks and Regards,
    Sekar

    Hi jakob,
    Thankyou for your quick response.
    I did a basic model with the help of a documentation which i got from this forums.I created a iView and from there i used Bapi "BAPI_SALESORDER ".
    I created a Input Form and a outpot form (table view).I tested model and am able to get the output.but when i try to deploy it is giving me the error.
    And i think am not paring any formulas here.
    Please guide me.
    thanks and regrads
    Pradeep.B

  • The method getBean() is not valid for metadata object /ex/model/remittance/client/common/bc4j.xcfg

    Hi,
    I am getting bellow error when i am running my application. I am using JDeveloper 11.1.2.3
    <Nov 6, 2013 9:52:57 AM AST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
    <Nov 6, 2013 9:52:57 AM AST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    <BC4JConfigLifeCycleCallBack> <contextInitialized> MDS-01702: The method getBean() is not valid for metadata object /ex/model/remittance/client/common/bc4j.xcfg - it is allowed on only bean metadata objects.
    oracle.mds.exception.MDSRuntimeException: MDS-01702: The method getBean() is not valid for metadata object /ex/model/remittance/client/common/bc4j.xcfg - it is allowed on only bean metadata objects.
      at oracle.mds.core.MetadataObject.getBean(MetadataObject.java:327)
      at oracle.adf.share.jndi.MDSBackingStore.getMOBean(MDSBackingStore.java:558)
      at oracle.bc4j.mbean.RuntimeMXBeanImpl.init(RuntimeMXBeanImpl.java:120)
      at oracle.bc4j.mbean.RuntimeMXBeanImpl.<init>(RuntimeMXBeanImpl.java:110)
      at oracle.bc4j.mbean.RuntimeMXBeanImpl.<init>(RuntimeMXBeanImpl.java:101)
      at oracle.bc4j.mbean.BC4JConfigLifeCycleCallBack.contextInitialized(BC4JConfigLifeCycleCallBack.java:114)
      at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
      at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
      at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
      at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
      at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
      at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3153)
      at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
      at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
      at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
      at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
      at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
      at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
      at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
      at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
      at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
      at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
      at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
      at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:636)
      at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
      at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
      at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
      at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
      at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
      at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
      at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
      at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
      at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
      at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
      at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
      at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
      at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
      at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
      at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
      at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
      at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
      at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    <Nov 6, 2013 9:53:11 AM AST> <Notice> <LoggingService> <BEA-320400> <The log file C:\Users\maroof\AppData\Roaming\JDeveloper\system11.1.2.3.39.62.76.1\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log will be rotated. Reop
    I seen oracle docs solution
    MDS-01702: The method getBean() is not valid for metadata object {0} - it is allowed on only bean metadata objects.
    Cause: An attempt was made to access the metadata object using the bean API but the metadata object was not a bean metadata object. The schema for the root element may not have been registered with MDS, or the beans were not available on the classpath.
    Action: Regenerate the beans from the schema definitions and ensure that the correct versions are on the classpath. Check that the schemas are registered with the MDS instance.
    Level: 1
    Type: ERROR
    Impact: Configuration
    But i am not getting what i do in my application for removing this error.
    Maroof

    Do you use MDS in your application?
    It's possible that you see a leftover of an earlier deployment.
    Do you get the same error if you only start the integrated server (application server navigator->integrated server->debug or run)?
    IF you don't get it when you only start the server without running your application, the problem is somewhere in your app. If you get the error it's probably an old deployment or a configuration error of your server. In this case stop jdev, rename the DefaultDomain folder C:\Users\maroof\AppData\Roaming\JDeveloper\system11.1.2.3.39.62.76.1\DefaultDomain tp C:\Users\maroof\AppData\Roaming\JDeveloper\system11.1.2.3.39.62.76.1\xxxDefaultDomain and start jdev again. Then use hte application server navigator to create a new integrated server (you should see this option as the DefaultDomain folder is not present) and once the new integrated server is created test again.
    Timo

  • Illegal state for operation deploy: 'STATE_PREPARED'

    Hi I am getting the following exception while updating an ejb jar on OSB for a transport type Business Service
    ]Illegal state for operation deploy: 'STATE_PREPARED'.
    weblogic.management.DeploymentException: [Deployer:149266]Illegal state for operation deploy: 'STATE_PREPARED'.
    at weblogic.deploy.internal.targetserver.operations.ActivateOperation.validatePrepare(ActivateOperation.java:231)
    at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:76)
    at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217)
    at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:723)
    at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1190)
    at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:248)
    at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159)
    at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:157)
    at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:12)
    at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:45)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    >
    Any help or pointers would be higly appreciated

    Are you calling the right path?
    The call to page.getContentResource("image") will end up calling the following:
    resource.getResourceResolver().getResource(resource, “jcr:content/image”);

  • Prerequisites for transporting data

    Hi Gurus,
    What are the prerequisites for transporting the data from one server to another server? What are steps we do? Kindly brief me details please.
    What is the use of T code SE09 SE10 & STMS
    Regards
    Rakesh

    Hi
    Pre requisites for Transporting the data from one server to another are that you need a Transport request number. The basis team can create the Transport Request for you.
    SE09, SE10 are the T codes for the Transport Organizer.
    STMS is the T code for the Transport Management System.
    If you have any further questions about this please contact the basis folks on your team, they can provide you the details and the steps that need to be followed as per the Company SOP's.
    Best Regards

  • Deployment Optimizer - Modeling question

    I am new to the Deployment/Optimizer area.  I have modeled a scenario as described below. 
    And have a few questions on what I would like to happen during deployment.
    Central DC: CDC1, Regional DCs: RDC1 & RDC2
    Product gets deployed from Central CDC1 to RDC1 & RDC2.  I have customer demand and forecasts at all the three locations. 
    I have defined ATD Receipts category group as just Stock on hand only (category CC) and ATD Issues includes AY, BH, BI,
    BM, BR, EB etc.  These two categories are assigned to the Location Master. 
    I have specified Fair Share Rule "A" in the Product master and location dependent penalty costs in SNP1 tab.
    In the Deployment Optimizer profile I have mentioned that the Distribution is based on Lowest Costs for both Supply Shortage
    and Supply Surplus.  I have defined a Pull Depl. Horizon of 10 days, and blank for Push Deployment and SNP Checking Horizon.
    When I run the deployment with all the three locations, what I notice is that the Customer orders and forecast of the Central DC are
    satisfied before deploying anything to the Regional DCs.
    My requirement is that the Central DC should deploy the available quantity at the Central equally among the Centrals and the Regional
    DCs on a fair share basis for the Sales orders first, then the remainder of the stock should be deployed, again among Central and
    Regional DCs on a fair share basis for the forecast and the safety stock is the last.
    How can I achieve this equal deployment among central and regionals even though Central is the source location.
    Could somebody let me know how to model this above requirement?
    Thanks,
    Venkat

    Hi Venkat,
    I am trying to model the exact scenario where the ATD quantity is not being equally split but the whole chunk is being sent to one of the destination locations. Can you please let me know how you have setup the cost models.
    Regards

  • Track configuration for SCA deployment to QA

    Hello Community,
    I have a 4 system landscape (EPD, EPQ, EPS, EPP) and a NWDI System (JDI).  At the moment there is a track configured as follows:
    u2022     DEV = EPD
    u2022     CON = EPQ
    u2022     TEST = EPS
    u2022     PROD = EPP
    I would like to use CTS to deploy the assembled SCA file instead of CMS, and it is desirable for the request to originate from EPD then import into EPQ.  Does this require the use of the u201Cdevelopment system onlyu201D flag for direct deployment to QA rather than consolidating before assembly?
    Kind Regards,
    Zach

    Hello Sheryas,
    I've commented on your helpful comments.  Thank you!!
    > Considering that your CTS system is properly configured with transport routes defined for...
    > u2022 DEV = EPD
    > u2022 CON = EPQ
    > u2022 TEST = EPS
    > u2022 PROD = EPP
    All systems in the domain controller (sid: CTS) are non-abap systems, and EPD is the source system.  D->Q->S->P is the configured route.
    > 1) You need to configure the track only with the Development as the only Runtime system selected, that will contain the information of your EPD.
    The track will only have a Development Runtime System configured.  However, this does not require checking the "Development System only."
    > 2) Once you perform the assembly step, the SCA file that will be prepared will get automatically attached to the Transport request created in the CTS system.
    > 3) then you can take that transport request forward to quality system.
    > 4) Also you need to make sure that the "Connected to CTS" checkbox is selected and the CTS upload system value is also set correctly.
    Assuming the CTS system (domain controller, nwdi, and non-abap systems) are configured correctly, I can register EPD as the upload system.  This will place the released transport into EPQ's import queue.
    Kind Regards,
    Zach

  • Scenario for a single forest model

    Kind greetings.
    Could anybody please help me to know the best suited scenarios for a single forest model?
    I would be much appreciated. Thank you.

    Hi Tino,
    Thanks for your reply.
    The deployment below is a simple environment with a single domain in a single forest, you can take it as an example:
    Server1: Domain Controller and DNS server (only one NIC with a static IP address and DNS server points to itself)
    Server2: Domain member (in the same subnet with Server1, DNS server points to Server1)
    Install AD DS in server manager on server1, choose Create a new forest on Choose a Deployment Configuration page. On the Domain Controller Options page, select DNS server option and create the first domain controller with DNS role in a new forest.
    Then promote server1 to a Domain Controller. After that, add Server2 to the domain.
    More information: 
    Installing a New Forest by Using the Graphical User Interface (GUI)
    http://technet.microsoft.com/en-us/library/cc755059(v=ws.10).aspx
    How to Join Your Computer to a Domain
    http://technet.microsoft.com/en-us/library/bb456990.aspx
    Best regards,
    Susie

  • Can't deploy a model that includes a service

    I'm using flashbuilder 4.5.1 & lcds 3.1 and I'm trying to deploy a model that includes a service something like this:
    <service name="Zoo">
            <annotation name="ActionScriptGeneration">
                <item name="ServiceType">RemoteObject</item>
            </annotation>
            <function name="scoop" return-type="void">
             <parameter name="animal" type="opaque"/>
            </function>
        </service>
    When I try to deploy it I get this lcds error about expecting an annotation.  I've successfully used this capability in the past, any suggestions or workarounds?
    thanks in advance

    Rohit,
    Thank you very much for the explanation. 
    By the way, the Flash Builder 4.5  Data Model perspective displays the following when you hover over a <function…> tag and appears to be in error. See text in red below.
    Defines the prototype of an externally defined function within a service.
    For information about functions, including how to add them in Design mode, see Add service functions. Can
    appear
    A function element can only appear as an immediate child of a service element. Attributes
    Attribute
    Req/Opt
    Default
    Description
    name
    Required
    Specifies the function name.
    arguments (deprecated)
    Optional  
    Note: The arguments attribute is deprecated in LiveCycle Data Services 4.5. For prolonged support an d
    augmented functionality, use the parameters attribute.
    Specifies the names and types of the function’s arguments. If present, the value specified for arguments
    takes the form name:type, where name and type denote argument names and types, respectively.
    Names must be valid data model language names, and types must be valid data model language type
    expressions
    Instead of an arguments attribute, you can use child parameter elements. If you use parameter elements,
    you cannot include the arguments attribute.
    parameters
    Optional  
    Specifies the names and types of the function arguments. A missing parameters attribute indicates that the
    function takes zero arguments.
    If present, the value specified for arguments takes the form name:type[=default], where name , type, and
    default denote parameter names and types, and default values respectively. The name and type are required.
    The default value is optional.
    Separate mutliple parameters with commas.
    Default values can be literal values or expressions.
    Names must be valid data model language names, and types must be valid data model language type
    expressions.
    Instead of a parameters attribute, you can use child parameter elements. If you use parameter elements, you
    cannot include the parameter attribute.
    return-type
    Optional  
    Specifies the return type of the function.
    You must specify the type of data that is returned. However, the attribute is optional because you can use a
    child return-type element instead. Child elements
    A function element can contain zero or more annotation and parameter elements, and zero or one return-
    type elements. Example
    The data model in the following example contains a service with two functions, both of which are called
    from expressions in properties of an entity. <model xmlns="http://ns.adobe.com/Fiber/1.0">
        <entity name="Applicant" persistent="true">
            <property name="name" type="string"/>
            <property name="ssn" type="string"/>
            <property name="age" type="integer"/>
            <property name="state" type="string"/>
            <property name="score" expr="CreditScore.getCreditScore(ssn)"/>
            <property name="risk" expr="CreditScore.getRisk(state, age, score)"/>
            <id name="id" type="integer"/>
        </entity>
        <service name="CreditScore">
            <function name="getCreditScore" parameters="ssn:string" return-type="integer"/>
            <function name="getRisk" parameters="state:string, age:integer,
                 score:integer" return-type="integer"/>
        </service>
    </model> <
    Maybe you can pass this info along so it gets fixed on the next Data Model plugin release…
    Thanks,
    Oscar

  • Exchange 2013 Certificates for Hybrid Deployment Clarification

     I have an Exchange 2013 servers (CAS and Mailbox on separate server) which I wanted to setup for Hybrid deployment. I already have a certificate acquired from 3rd party with 3 names (mail, autodiscover and owa). the certificate was installed in the
    CAS server. As per the hybrid deployment documentation I need also to install a certificate in the mailbox server, questions:
    1. Can I use the same certificate for installation in the mailbox server?
    2. Can I also use the same certificate in the Hybrid Configuration wizard for the "certificate to use with securing the hybrid mail transport"?
    3. Do I need to include the primary smtp domain (xxxxx.com) in the certificate since current configuration points to the mail.xxx.com as the certificate common name?

    Hi,
    Here are my answers you can refer to:
    1. It depends.
    The certificate used for hybrid secure mail transport must be installed on all on-premises Exchange 2013 Mailbox and Client Access servers.
    If you're configuring a hybrid deployment in an organization that has Exchange servers deployed in multiple Active Directory forests, you must use a separate third-party CA certificate for each Active Directory forest.
    2. Yes. But we recommend that you use a dedicated third-party certificate for any optional AD FS server, another certificate for the Exchange services for your hybrid deployment, and if needed, another certificate on your Exchange servers for other needed
    services or features.
    3. Yes. Here are the minimum suggested FQDNs that should be included on certificates: domain.com, autodiscover.domain.com, edge.domain.com
    For more information, you can refer to the following article:
    http://technet.microsoft.com/en-us/library/hh563848(v=exchg.150).aspx
    If you have any question, please feel free to let me know.
    Thanks,
    Angela Shi
    TechNet Community Support

  • Deployment methodology models

    Hi there,
    I am looking for a deployment methodology that will provide minimal impact on my existing applications and maximal re-use of code (i.e. loosely coupled).
    Right now, we want to use persistence code, the data access code, and a few other pieces of code in several applications.
    Every time we deploy, we run the risk of hosing the existing applications (until those base pieces are stable).
    Is it ok to use the same libraries over and over again in several applications? If so, that could be a solution, but is it common practice or is there a better solution out there?
    Does anyone know or know where I could find some common deployment models and how to implement them?
    Thanks so much!

    >
    Is it ok to use the same libraries over and over again in several applications?
    I cannot answer much of the rest you are asking about, but can confirm that it is easy to reuse code in JNLP applications by putting the code in a component descriptor and referencing that component descriptor (JNLP) from the main launch JNLP file(s) as an extension from within the resources element.

  • Delivery 0080000276 is not relevant for transportation planning.

    At the time of (delivery related) invoice creation, system throws a message "check the error log".
    Log says:
    " Error Log             0080000276 000010 Delivery 0080000276 is not relevant for transportation planning
                LongText
                    Detail
                     Diagnosis
                         Copying control for billing requires that shipment costs
                         are copied from the shipment belonging to this delivery.
                         No shipment costs could be determined, because this
                         delivery is not relevant for transportation planning.
                     System Response
                         The system assumes that no shipment costs are to be billed
                         in this case.
                Technical data
                    Tech. data details
                     Client                                 251
                     Group Number
                     Sales Document Number                  0080000276
                     Item Number of the SD Document         000010
                     Schedule Line Number                   0306
                     Counter in Control Tables              00
                     Message Identification                 VY
                     System Message Number                  306
                     Output Type                            I
                     Message Variable 01                    0080000276
                     Message Variable 02
                     Message Variable 03
                     Message Variable 04
                     Group Type                             F "
    Please advice if anyone have any idea for this error log.

    Error Log 0080000276 000010 Delivery 0080000276 is
    not relevant for transportation planning
    It is not necessary to assign the Transportation Planning to Delivery type.  Only recently, I completed a similar configuration and running successfully for a client.  The issue is  because of your copy control VTFL.  For more information, check note 713171.
    thanks
    G. Lakshmipathi

Maybe you are looking for