SOP product group

Hi All
I  have more than one product group produced on one  production line and we want do and see  the capacity analysis for all the product groups at the same time to get the overview capacity analysis for the line.
How to see it in one transaction?

Mayuresh,
You mean to say you have more than one products can be manufactured in one work center and you want to do the capacity planning.
After MRP run system will create plan orders, then go to CM25, select profile: SAPSFCG014- put workcenter and plant and execute. You will get 3 different charts where you can do the planning for all products at a time.
Tara

Similar Messages

  • SOP for product group

    Hi experts,
    I have a problem transferring planed Sales quantities by product groups to SOP.
    I did steps:
    1.     Planned sales quantities by material, KEPM.
    2.     Created product group with members material, MC84
    3.     Transferred planned sales quantities to SOP into inactive version, KE1E
    I can see or change SOP for material (MC88, MC89), but plan for product group is empty (MC82, MC83)!!!! Iu2019ve tried to create sales plan for product group transferring it from COPA (MC82), but it doesnu2019t work. Accordingly Break down PG plan (MC76) doesnu2019t work because plan for product group is empty and there is nothing to distribute.
    4.     Iu2019ve checked planning type SOPKAPA for info structure S076. Structure row Sales  has Aggregation method Total created. Iu2019ve tried to change planning type SOPKAPA, e.g. inserted new structure row. But for product group plan I see the same view, I mean there is no new structure row. Is it possible, that plan for product group used another planning type not SOPKAPA?
    The main question is u2013 how to aggregate/ sum planned sales quantities for product group?
    Thanks in advance!

    Hi,
    Greetings,
    I guess,you know the limitations while transferring COPA plan data to SOP in PP module.
    however,let me repeat 1.Unit of measure maintained in COPA module and PP module should be same.
    further,2.You can transfer planning data to SOP at the product level or the product group level. If you want to plan and transfer data at the product group level, you need to create a characteristic (or characteristics) to represent the product group levels in SOP when you maintain your operating concern. Since in SOP product groups are stored as products in the database, make sure the characteristic you create for the product group has the same type and length as the characteristic "Product" (CHAR 18).
    Kindly check these two limitations.
    Thanks  - GS Rao

  • Error while creating Product Group in SOP

    HI Gurus,
    When I am trying to create the product group in SOP in MC84 , I get follwoing error.
    "Product group cannot be created (batch input error 7)  Message no. MA218"
    how to slove this?
    Thanks in advance.
    RG

    Rajiv,
    Basically if there are mismatch in the Field selection and fields visible in MC84 you would get this error.
    The workaround suggested by SAP is to create a product group using MM01 with material type PROD, latter on using the change product group transaction MC86 you can assign its members.
    Regards,
    Prasobh

  • Creating a new product group for SOP

    We have SOP set up in our system .When i am trying to create a product group with material as a member , i am getting error , what is this ? Any help
    The field  is defined as a required field; it does not contain an entry
    Message no. MG144
    Procedure
    Transfer a suitable value.
    If the field is the material group or unit of weight, and the field is not ready for input, check whether the material is locked. If it is locked, you cannot extend the Purchasing view or the Sales view. If either of these views needs to be extended, the material must first be unlocked. This can be done only by a user with special authorization. Contact your system administrator.
    Note
    For information on locking and unlocking material master records, see the SAP library documentation Material Master (LO-MD-MM) -> Locking Material Master Records.

    Hi,
    Check mandatory field and sales and purchase view in material master.
    Please check authorization for it aslo.
    Go to tcode OMSFIX and un check if any field is checked for lock relevant.
    this will open the field in MM01 and you can see the required field,
    You can unlock the material in transaction MM02 (You will find "Unlock" icon in the application tool-bar).
    Please refer this thraed,
    [Thread.|PRODUCT GROUP;
    Regards,
    R.Brahmankar
    Edited by: R Brahmankar on Sep 11, 2008 10:02 AM

  • Product groups in SOP

    Hi
    I have created a product group heirarcy in SOP. I want to view the the complete heirarchy in a report format. I do not want to use a graphical output like MC91/MC92. I need something like multi level BOM structure on Prod G heirarcy but not in a graphical format.
    thanks

    report MC71 with displaly option 1 and 2 it will give the report like Cs11/cs12

  • Error while creating product group

    hi,
    i am getting error while creating Product group.
    Required parameters missing when calling up module
    Message no. M3749
    Please suggest me.. how to cop this
    Regards,
    amit

    Dear Brahmankar,
    I am using product groups in SOP as well as in the normal plannning scenario.In the normal planning scenario I am giving my PIR's in MD61 for the entire group.Then I am running MRP in MD02 for my product group.System is generating all the requirements normally for the entire group .
    Please suggest me , this process is correct or it will create any problem in any module .
    Thanks & Regards
    Prabhakar

  • Error while creating the product group by MC84

    Hello Friends,
    I am creating the product group by MC84, and in product group field i have given the product group name i.e P2345, and its description i.e product group for waluj, plant i.e cw01 and Base unit i.e KG.Now when i press enter system is throwing the error"The field is defined as the required field;it doesnot contain an entry."Message no.MG144.And with this error system is placing the cursor on product group field.As i have already given product group name than also system is throwing the error.
    Though i know the alternative method to create product group by MMO1 and selecting the material type PROD, then also i want to know why system is throwing the error while creating the product group by MC84.
       Please guide.

    Dear,
    This message says that you have not entered a mandatory field.Enter proper values for all mandatory fields and then you will not get this error.
    Try to create the product group as material of material type"PROD"
    Then you go on adding the memebers in SOP Transaction.
    In some of the versions of SAP it is the problem.
    I have also faced this problem in some versions.
    Regards,
    R.Brahmankar

  • About Product Group

    Hi,
    While i'm creating product group i'm getting the error message like
    The field is defined as required field; it does not contain an entry.
    plz help me.

    Dear,
    Are you getting message no MG144?
    Please Try to create the product group as material of material type"PROD" in MM01
    Then you go on adding the memebers in SOP Transaction. inMC85 / MC86.
    check this link
    product group
    It will work for you.
    Regards,
    R.Brahmankar

  • Transfer Product Group to DM

    Hi Experts,
    Please help.
    When I am trying to transfer product group to DM in MC76 facing follow warning message and even I transfer only one member number in Product group get transfer.
    What to do to trasfer PG
    This PG is not the MRP-relevant PG for all members
    Message no. MA538
    Diagnosis
    You want to pass on product group member data to Demand Management. However, the product group you have specified is not the MRP-relevant product group for all materials.
    System Response
    A material typically has an MRP-relevant indicator if it is a member of more than one product group. You set this indicator in the product group from which you want the material to be transferred to Demand Management. This prevents planning data for the same material from being transferred to Demand Management multiple times from different product groups.
    Procedure
    Transfer materials to Demand Management from their MRP-relevant product groups.
    Raja.

    Dear Raja,
    Please refer my reply I have given to you in your previous posting.
    Also refer my reply from this link,
    Re: Error During MC75
    Re: SOP
    Hope it will work for you.
    Regards,
    R.Brahmankar

  • Error in Product group creation

    HI,
    When I am creating product group at that time i m getting error like "Required parameters missing when calling up module"
    Can anybody tell me solution..?
    Product grp i m creating for SOP.

    Dear Chetan,
    Create a material using T code MM01,using the material type as PROD and then assign a plan for this product group in MC81.
    Check this link,
    Product group error
    Regards
    Mangalraj.S
    Edited by: Mangalraj.S on Aug 20, 2009 3:18 PM

  • Failed to create a product group

    hi:
    pp friends,I got a problem when i used MC84 to create a product group with measure unit named PC in SOP. the poped message is "Unit of measure  is not defined; check your entry" Accoding to the Diagnosis and Procedure of sap assistant,i checked the table T006  and cuni, there is the measurement unit called PC. any idea is appreciated,thanks in advance.

    Hi wang
    "PC" piece is the defined unit of measure only. This will not be a problem.
    I think different product member with different UOM can form a product group to single UOM. During homogenisation it will ask for UOM at that time you have to give PG UOM. Try with both header and member UOM.
    Regards
    J . Saravan

  • Product Group capacity can not be seen in MF50 output

    Dear All,
    I can not see the product group in 'total capacity' subscreen in output of planning table MF50.
    In MF50 the input parameter i am entering is product group and plant.
    In the scheduling tab of input parameters detailed scheduling and capacity planning is tick.
    For some product groups i can see in output as "Product Groups / Total Capacity" and also in the rows below it shows "Prod.Grp XYZ" then requirement and available quantity rows. After which the production line rows follows.
    For some product groups when enter in initial selection screen of MF50 with same input parameters in output i do not see Product group but i can see "Total Capacity Data" and then the rows starts with production lines. But no information on capacity of product group.
    The setup of all product group is same and are created with MM01.
    Regards,
    Vero.

    Hi Rupesh,
    Thanks for reply.
    In 'Control Tab' i am not selecting any parameter. So in output i can see all materials  in 'Material Data' section which are included in product group  irrespective of requirements.
    I have issue in upper half section of 'Total Capacity Data'. I can see the different production line rows with Requirement / Available rows with capacity values in each period. Unit is %.
    But i do not see 1st row for Product group row with 2 subsequent rows (requirement / available) with unit KG.
    I can see these rows only for some product groups but not for all.
    For the product groups for which i do not see these rows have capacity requirement in selected periods which can be seen in same output in production lines rows. (where selection in input screen is product group and plant)
    Regards,
    Vero

  • Report for list of Product groups

    Hi,
    I wanted to have complete list of all the product groups (created thro MC84) and its members in one report.
    Is there any standard report avl in SAP.
    Regards
    Rishi

    Hi,
    Try using transactions - MC71, MC72 and MC73.
    Revert back.
    Rgds,
    Shrenik

  • Can a same member be in two product group?

    hi,
    Can we plan for a member which is part of two  Product group.  Right now I see when transfer demand from Second PG,  the calculations and PIR out of first PG is getting overwritten.  My requirement is to add to existing PIR rather than overwriting it.   Is it possible?
    regards
    Rav

    I think you're confusing Albums and Projects.
    each time i connect my camera to the laptop, i import the photos to a new album,
    No you don't. You can't import to an Album, you import to a Project. A Project has a Box like icon. Projects are a reflection of the organisation if the originals on the HD. Move a shot from one project to another and the file moves too. You cannot have a photo in more than one project +without duplicating the file+.
    Albums, on the other hand, have an icon like a Blue Book. You can have Albums that refer within a single project and Albums that refer all over the Library. Create an album (File -> New -> Album) and drag the images you want to it. The Files remain in their respective projects and are simply linked to the Album. Photos can be in 100's of Albums with no duplication.
    I have previously created an album called 'the best shots of 2010',i now want to add some photos to this album
    Use ratings and a Smart Album and do this automatically.
    Regards
    TD

  • Not able to Create Product Group.

    Hi All,
    Not able to Create Product Group. I has to be solved urgently. The below message form SAP.
    The field  is defined as a required field; it does not contain an entry
    Message no. MG144
    Procedure
    Transfer a suitable value.
    If the field is the material group or unit of weight, and the field is not ready for input, check whether the material is locked. If it is locked, you cannot extend the Purchasing view or the Sales view. If either of these views needs to be extended, the material must first be unlocked. This can be done only by a user with special authorization. Contact your system administrator.
    Note
    For information on locking and unlocking material master records, see the SAP library documentation Material Master (LO-MD-MM) -> Locking Material Master Records.
    Thanks in Advance,
    Pherasath.

    Hi,
    Use thie below path for creating Product group.
    Goto SPRO >Enterprise Controlling>Consolidation>Consolidation Functions>Automatic Posting>Elimination of IU Profit/Loss in Transferred Inventory>Define Product Groups
    Regards,
    JS

Maybe you are looking for

  • ITunes not installed correctly. error 7 windows error 127

    I recently updated my iTunes for Mac and ever since then I get an Error 7 (Windows error 127) window after this window (below) pops up. Any recommendations how to fix it? I've tried uninstalling and reinstalling ALL Apple software, restarting, and it

  • End User Tranining Manual in BW

    Hi Experts, I need to prepare End user training manual for BW end users. Could anybody suggests some ideas/tips to prepare this document. Or, if anybody having related docs. please send me those to my email id: [email protected] Response will be higl

  • Initialized Planning application,but cannot see business rules(scripts).

    Hi All, I am new to Hyperion and would really appreciate your help. I created a blank planning (11.1.1.3) classic application and initialized Capex planning (Edit->initialize capex), and then created and refreshed database so that it appears in Essba

  • Case insensitive XPATH

    Hi, I have the following XMLs stored in a column. <root> <abc>abc</abc> <def>def</def> </root> <root> <ABC>abc</ABC> <DEF>def</DEF> </root> Is there someway to use a case insensitive search in my extractValue so that I don't have to write it twice? e

  • Uploaded html code is reformatted

    I've asked this before but not had a comprehensive resolution. This issue began when I moved from my apple powerpc running OSX 10.5.8 to an imac running 10.7.3 and for the reasons you'll see I'm sure this is connected with mac OS than dreamweaver, bu