SOP-S076, Actual Data Update for Sales and Production

Hi All,
I have been working on a prototype to display the Actual Sales and Actual Production figures accurred during the past periods along with the Sales Forecast figures. I am using Product Groups and the standard Info Structure S076 provided in the Standard SOP.
Currently, the system is live with similar solution. However, when I display the entries in SE16 for the Version 000, I get a message "No entries found". As per the documentation, Version 000 needs to be populated by SAP and it can not be changed. Therefore, I can not pull these figures in any of the Planning Types I created.
I would appreciate any guidance to activate the Actual Version 000, in the Info Structure S076.
Regards and happy SAPping to all.
Mumin DIKMEN

Hi Mahesh,
Thanks for the reply. I replied to perform the Statistical Update as well. However, the response I am getting for the Info Structure S076 is
No information structure with active updating exists!
Message no. M2784
Diagnosis
No information structure with active updating exists for event and update group .
System response
Due to your data, the system cannot update any information structures.
Procedure
1. Check to see whether information structures using event exist in the update rules for udate group .
2. Check to see whether updating has been switched on for this information structure.
I also tried to activate this info structure in the case that SAP might have allowed updating definitions for S076 in ECC5, using the TCodes OMO* series in the IMG. However, there is still no Update Definition option for S076. When I display S076 using SE16N for the Version 000, nothing is displayed again in Production System.
I guess all this leads to posting an OSS note.
I would appreciate your comments.
Regards,
Mumin DIKMEN

Similar Messages

Did up date for 10.7.4 to 10.7.5 and update for Aperture and now Aperture doesn't open. How do I fix?

Did up date for 10.7.4 to 10.7.5 and update for Aperture and now Aperture doesn't open. How do I fix?

I heard dump the app and reinstall? How do I go about that?

Report to display (actuals data from one cube and plan from another)

Hi Gurus,
 I have a requirement in reporting to display actual data from one cube and plan data from a different one.
 The example below might give a clear picture of the requirement.
rows has key figures and columns = months
Jan | Feb | Mar | Apr | May | Jun ... ....
GrossSales
Net Sales
Now if I run the report for Current month (Apr), then for the months of (Jan, Feb and Mar) i need to get the data from CUBE1 and for the remaining months (Apr thru Dec) from CUBE2.
Similarly when i run the report next month(may),
then (data for Jan, Feb, Mar, Apr from CUBE1)
and ( May thru Dec from CUBE2)
Any suggestions.
Thanks in Advance
Kumar

Hi Henry,
 We alreadey have a multi provider which includes
FinDat Cube(CUBE1) for actuals and Comm.Goals cube (CUBE2) for plan.
So you suggest that we have two versions of key figure for actual and plan.
ie. each KF will have two versions.
actuals = (version 10, FiscPer<curr.mnth, key figure, acutals cube)
Plan = (version 20, FiscPer>=curr.mnth, key figure, comm.goals cube)
eg:
Jan | Feb | Mar | Apr | May | Jun ...
GrossSales(Act)
GrossSlaes(Plan)
Net Sales(Acutal)
Net Sales(Plan)
Correct me if I am wrong.
the report has a lot of key figures, having two versions for each kf will be confusing.
the user would like to see
Jan.....| ...Feb |..Mar |..Apr.....| May |
GrossSales Act Value|Act.V |Act.V| PlanVal|PlanVal|
Net Sales
where Act.Value is from CUBE1
 Plan Value is from CUBE2
Thanks
Kumar

I just ran a software update for Java and MacBook Pro SMC, now my Mini Display Port to HDMI TV is not working. The TV is flickering. The Mac Display is fine.

I was just watching / streaming TV off Safari on my actual TV.
I'm using a Mini-Display Port to HDMI cable for the connection to the external display.
Software update popped-up and said there was an update for Java and for SMC.
I ran the update and upon the computer restarting, my external display (my TV) is no longer working. It is now flickering.
It won't work in Mirroring or set up as an extended display.
I've reset SMC / PRAM / Safe Mode / Even restored from a Time Machine backup (From before the updates were done).
What could it be?!

I keep saying this over and over, in the hope that people who do a search will find it. Apple cannot possibly test for or be reponsible for the bazillion combinations of adapter, cables, and TV's out there. The only monitors that are 100% guaranteed to work with the MacBook Pro are the Cinema Displays and Thunderbolt Displays, because, they're made by Apple. They're expensive, but they work perfectly.
My guess is that you bought a cheap MDP to HDMI cable, or have a defective one. From my reading of these boards over the past few months, cheap cables have a high failure rate. And the regular priced ones have only a slightly less of one. Try a new one. Make sure you do not damage the Thunderbolt port.

Meet a problem of data exchange for sale order from CRM to R3.

Dear Friends:
 I do the data exchange for sale oder from to R3 today , the problem's detail is as follows:
 When i save a sale order in CRM (Version is 5.0) . it can automatically generate a bdoc which bdoc type is BUS_TRANS_MSG. but the bdoc status alway is "Sent to receivers (not all have confirmed)". and the original order in CRM can not be change .it quote that "Document is being distributed - changes are not possible", so i check the order status analysis in detail .it presents two error messages ," Event 'BEFORE_CHANGE', attribute ' FINI': Error code for function module 'CRM_STATUS_BEFORE_COMPLETED_EC' , "Item is not yet completed in OLTP system". so i check the order in R/3 ,it has already been create and without any error messages.
 Would like to tell me how to solve it . thanks your any idear..

Hi Benjamin,
When performing uploads to R/3 from CRM there is a response from the OTLP system that is sent back to the CRM Middleware to confirm that the data records were received and processed correctly.
Here is a checklist you can run through to verfiy that the connections, systems and objects that are needed are all in place:
On R/3 system:
- Check R/3 outbound queue (transaction SMQ1) for any entries that are not reaching CRM.
- Check that all RFC destinations on R/3 are defined correctly and are pointing to CRM
- Check the CRMCONSUM table in R/3 to ensure CRM is registered as a consumer
- Check the CRMRFCPAR table in R/3 to ensure that order objects are valid for exchange between R/3 and CRM
- Check for any short dumps in R/3 (ST22/ST21)
On CRM:
- Are there entries stuck in the inbound queue (SMQ2) with R3AU* names?
- What does the CRM Middleware Trace show (SMWT)? Sometimes this has more detail than the specific BDoc overview (SMW01)
- Check for short dums in CRM (ST22)
Let us know what else you uncover and we can work from there.
Brad

I have an iPad 1 and after I got the latest update for keynote and Now it crashes every time I try to open it

I have an iPad 1 and after I got the latest update for keynote and Now it crashes every time I try to open it

Do you have iOS 5.1.1 on your original iPad? If not update the iOS.
You might also try quitting the app and then reset the pad.
Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the app in question until it wiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal. Then reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
Still no joy? Delete the Keynote app, reset the iPad and then reinstall Keynote. You will not have to pay for downloading it again.

I accepted a recent update for iTunes and now my version of Spin Doctor can't communicate with it any more. I don't think I can upgrade the Spin Doctor without buying a new program. Is there a way to undo the last iTunes update?

I accepted a recent update for iTunes and now my version of Spin Doctor can't communicate with iTunes, specifically, I can't get music files to go over to iTunes. Spin Doctor gives me a message indicating that iTunes isn't working properly.
I am using iTunes 9.1.1(12) and Spin Doctor 3.1.1.304t. I have investigated upgrading the Spin Doctor but I think too much time has passed and the version available are too far advanced.
Any ideas? Can I undo the iTunes upgrade? Is there a website that I can go to to get the upgrade for my Spin Doctor?
Thanks.
Mary

If your iMac is an Intel CPU model, you can upgrade the OS to OS X 10.6 Snow Leopard.
Then use software update to update 10.6 Snow Leopard to OS X 10,6.8.
Then you can run the latest iTunes to sync your iPad running iOS 6
You can purchase OS X 10.6 Snow Leopard by calling Apple at 1-800-MYAPPLE. Ask for retail software sales and purchase a copy of 10.6 for $19.99 plus shipping.

I down loaded the update for 4 and when I get to the end where is you click finish, it tells me to close firefox, but I do not have it open. Now I can not get in to Firefox at all. PLEASE Help.

I down loaded the update for 4 and when I get to the end where is you click finish, it tells me to close firefox, but I do not have it open. Now I can not get in to Firefox at all. PLEASE Help.

You can get Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
You should still have your profile folder, so when you install 3. you will get your bookmarks and other user data back.
There is a third party version of Firefox that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox

Taking long time filling the setup tables for sales and shipment

Hi ,
I am trying to fill the setup tables for sales and shipment and it is taking lot of time .
It took 16 hours just to bring 6 months of sales history data in the test environment .
Cn anybody help on this issue why it is taking that much of time ...
I am trying to load the sales data from R/3 into APO-BW from 2005 to 2007 .......
It is taking 16 hours to fill the data for only 6 months .

Hi,
1. delete data and refill the setuptables again by spliting to several small pieces.
2. compare the data. wht is the last Document numner in RSA3(Maximum one). Start from Maximum one. may be bit complex approch.
you need to check with PSA and base tables.
keep one thing in your mind you need to check againest MSEG and BSEG only. noy BKPF and MKPF.
correct if i'm wrong.
either refill or create a user exit to avoid duplicae records(you should have very good understanding of data, it will lead to inconsitent data for delta records).
User exit not a good solution. it's one possibility.
****Assign Points If Helpful****
Regards,
Ravikanth

Master data loads for Attributes and texts failing

Hello
Master data loads for Attributs and texts are failing. The error is
1. Lock Not set for Loading master data attributes
2.Table /BI0/YAccount does not exists (this error is for 0Account master data - attribute load)
3.Error 1 in the update.
We had faced this error few days ago and rebooting the server resolved the error but it has recurred after 4 days.
RS12 and SM12 do not show any locks. Activating the info object has also not resolved the error.
Any insight is appreciated.
Thanks
Inder

Hello
Master data loads for Attributs and texts are failing. The error is
1. Lock Not set for Loading master data attributes
2.Table /BI0/YAccount does not exists (this error is for 0Account master data - attribute load)
3.Error 1 in the update.
We had faced this error few days ago and rebooting the server resolved the error but it has recurred after 4 days.
RS12 and SM12 do not show any locks. Activating the info object has also not resolved the error.
Any insight is appreciated.
Thanks
Inder

Downloaded update for Firefox and now I can't get rid of AOL.

Downloaded update for Firefox and now I can't get rid of AOL. I have tried to delete anything associated with AOL and when restart Firefox.....there's AOL again. I even reinstalled Firefox.......there it was again.

Where does AOL show up -- home page?
I think the first thing to check is whether you have any AOL-related add-ons. These might override your regular settings. You can review and disable ALL nonessential or unrecognized extensions here:
orange Firefox button (or Tools menu) > Add-ons > Extensions category
Note that in most cases, you need to use the Restart Firefox link to actually deactivate the extension you chose to disable.
Next, to fix your home page, try the steps in this article: [[How to set the home page]].
If there is a problem with your search providers being switched from Google to AOL, try this extension:
https://addons.mozilla.org/en-US/firefox/addon/searchreset/
Any improvement?

Aperture keeps crashing. "Check with developer to make sure aperture works with version of mac os x you might need to reinstall the application ..be sure to install any updated for aplication and mac os x"

"Check with developer to make sure aperture works with version of mac os x you might need to reinstall the application ..be sure to install any updated for aplication and mac os x"
I updated aperture and os x. Latest versions. I also reinstalled aperture. Still getting the same. please help

Process:
Aperture [448]
Path:
/Applications/Aperture.app/Contents/MacOS/Aperture
Identifier:
com.apple.Aperture
Version:
3.2.2 (3.2.2)
Build Info:
Aperture-201096000000000~2
App Item ID:
408981426
App External ID: 5333832
Code Type:
X86-64 (Native)
Parent Process: launchd [125]
Date/Time:
2012-02-24 23:05:55.982 +0000
OS Version:
Mac OS X 10.7.3 (11D50b)
Report Version: 9
Interval Since Last Report:
18654 sec
Crashes Since Last Report:
20
Per-App Crashes Since Last Report:   20
Anonymous UUID:
244A3A5D-F483-4E17-AFD2-B35CB6B4EBD4
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: /Library/Frameworks/PluginManager.framework/Versions/B/PluginManager
Referenced from: /Applications/Aperture.app/Contents/MacOS/Aperture
Reason: no suitable image found. Did find:
/Library/Frameworks/PluginManager.framework/Versions/B/PluginManager: no matching architecture in universal wrapper
I havnt installed anything for last 10-15 days.
Aperture library located on hd.
12 ram 870GB free space

Updates for PhotoshopCC and Lightroom having trouble with downloads. error , corupt files under learn more. First time in the year that I have Photoshop CC

Download trouble today Got the message for new updates for Lightroom and Photoshop CC. Download fails, under learn more ,, corupt files Fist time this hapened in a year Whats the remedy?

There's a number of potential problems here, and they may not necessarily be at your end.
First of all, it should be clear that CMYK is not so much a generic "image mode" as it is a description of specific press conditions. If you produce final CMYK, you must have the right profile. Don't use Image > Mode, use Convert to Profile.
Given that, I would question anyone who doesn't accept Adobe RGB photographs for a magazine article, because it implies a process that isn't properly color managed and generally not up to date. A standard workflow today would use InDesign, where images are normally placed in their original RGB space whatever that is. Then the conversion to final output CMYK is done as the last step, when producing a press-ready PDF from InDesign.
It helps tremendously if you know that final CMYK, because then you can proof to that so your file survives the CMYK conversion with the least possible damage (we're talking gamut clipping here; not general color shifts). But it's not absolutely required, which is why this workflow is relaitively safe.
Third, CMYK jpeg is in itself risky, because many jpeg decoders (in some software) don't have proper CMYK support. The result can be weird colors. This could well be the problem here, because it sounds as if your client uses a non-standard workflow.
So what to do? I would send two files. One sRGB as reference, which is guaranteed to come through correctly. Then find a way to send TIFF for the CMYK version if they insist, or ask them to try opening it in different software. Of course you should have a calibrated and profiled display, but I agree that's probably not the immediate problem here. There's no particular reason a CMYK file should come back with twisted colors if it's opened and processed in properly color managed software.

[svn:fx-trunk] 5464: ASDoc updates for FxApplication and Application ( no code changes)

Revision: 5464
Author: [email protected]
Date: 2009-03-20 11:52:50 -0700 (Fri, 20 Mar 2009)
Log Message:
ASDoc updates for FxApplication and Application (no code changes)
* notes the pageTitle property is for use with the SDK HTML templates
* update the default values for backgroundGradientColors
QE Notes: None
Doc Notes: Please review
Bugs: SDK-16535, SDK-16693
Reviewer:
tests: checkintests
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-16535
http://bugs.adobe.com/jira/browse/SDK-16693
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/mx/components/FxApplication.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/core/Application.as

Master Data source for sales district or Region in CRM

Dear All,
Please let me know the Master Data source for sales district or Region in CRM.
Thanks
Regards,
Sai

Hi Tiest,
Thanx for responding.
U r right, our clint is upgrading from 4.6 to ECC.
So as per the clients requirements, we are maintaining all the configs for Services in CRM.
Services Data which was in 4.6 is being pulled put on flat files which needs to be loaded in CRM. So middleware would not be able to do this.
What I am looking os some standard upload program.
LSMW recording does not work.
This I-Doc "CRMXIF_COND_REC_SLIM_SAVE_M", i am able to load a single record. But I am not able to find , how to make this function for multiple entries.
IN standard we for loading master data thru I-docs, we map the values to the standard fields which are available in that I-Doc.
But in this particular i-doc, there is a common field for which I need to define the field name and a field value..
Till now, I am only able to define just one field name and a field value.
I want this to word for mutliple entries.
Hope u get my point.
Thanx

SOP-S076, Actual Data Update for Sales and Production

Similar Messages

Maybe you are looking for