SOP to Demand Management - Mass Transfer -RMCA0766 - Program does not exist

Dear Experts,
I am configuring the mass transfer from SOP to Demand Management. I want to maintain the variant for the program RMCA0766 so that I can create the Mass transfer job.
But I get the message RMCA0766 does not exist. So, How do I generate this program in the client?
Any help would be greatly appreciated.
Reagrds
Tom

Hi,
Please refer the below document. It speaks about the mass processing on SOP.
http://help.sap.com/bestpractices/BBLibrary/documentation/M06_BPP_22_EN_NO.doc
Hope you will get the answer you needed.
Regards,
Manimaran M.
Edited by: M Manimaran on Aug 9, 2011 8:01 AM

Similar Messages

Transfer structure 0BUS_AREA_TEXT_HA does not exist

We are transporting InfoCube - 0FIGL_C10. which we had collected in a transport request with grouping as in Data Flow Before. This request ended with return code 12 with error message "Transfer structure 0BUS_AREA_TEXT_HA does not exist, Error RSAR 440 when handling objects with type R3TR ISTS"
After this I collected the transfer rules of 0BUS_AREA_Text with grouping as dataflow before and after. the transport of this request also failed with return code 12 with the same error message "Transfer structure 0BUS_AREA_TEXT_HA does not exist, Error RSAR 440 when handling objects with type R3TR ISTS"
has any one faced this error, please suggest the corrective action to be taken,

hi all,
I'm now getting the same error when I try to activate a created "transfer rules" for any type of DataSource of my cProject.
"Transfer structure 0DPR_***********_DA does not exist
Message no. RSAR440"
please show me on step by step because I'm a new guy of this SAP.
Thanks,
Chuong Hoang
R&D engineer of global cybersoft - vn

Transfer Structure 2LIS_03_BX_QB does not exist

Hi all,
I got the following error message when transporting infosource 2LIS_03_BX.
"Transfer Structure 2LIS_03_BX_QB does not exist"
Maybe somebody can help me.
Thanks and appreciate that,
-Martin-

hi Martin,
try in dev rsa1->transport connection with infosource 2lis_03_bx as starting point, collection mode 'manual', grouping 'in dataflow before', and click 'source system assignment' (yellow box with x) and make sure r/3 source system is marked. then click execute. it will collect objects, after finish, make sure transfer rules, transf structure and datasource are marked following the infosource. create request and transport.

Transfer structure 0ACCT_TYPE_TEXT_BC does not exist

Dear Experts,
I am facing the following error while activating Transfer rules for any object from Business Content.
For your information:
ERROR: Transfer structure 0ACCT_TYPE_TEXT_BC does not exist.
1. We are working on BI 7 Version. Patch Level 10 and BI Content Patch Level 001.
2. Ours is a Fresh Implementation in BI.
3. This problem is coming for all most all the objects when we are activating theTransfer rules.
immediate repliers are appreciable.
Thanks and Regards,
Sai Phani.

Hi All,
Sorry for the late reply,
I have solved the issue. Actually that is the problem of Patch Level of BI earlier it was 9 and we have updated it to 16 now, and the BI Content Level also updated to Patch Level 5.
Then we have edited the Number Range using SNUM T-Code and now it is working fine.
Thanks for your replies.
Krishna.

SMC - "The management domain file...does not exist"

Hi All,
Just a quickie to see if anyone has seen this and has any pointers to getting out of it...
Solaris 10 u5 x86. Machine has got SRSS4.0 running on it, the only other modification is CUPS is running in favour of the Solaris lp stuff (got instructions for this off a BigAdmin article).
Anyways, I use SMC to manipulate user/group stuff on the local machine. SMC launches just fine, and I can gather System Information, view logs, disk configuration, processes etc. However, when attempting to do any user/group/role stuff management, I authentication with root role, click on the relevant panel, and get this:
"The management server cannot perform the operation requested.
If this problem persists, refer to the Log Viewer for additional information and contact your Sun Microsystems support provider.
The actual error reported was:
The management domain file:/shadowfire/127 does not exist or cannot be managed on server shadowfire."
The behaviour is consistent. Gee, it was running fine before, AFAIK...
Any pointers to what may have come unstuck gratefully appreciated, as always :)
Dave

I came across the same problem late July almost same day - on a brand new M4000 server with Solaris 10. I use an X-windows client to connect in and open Common Desktop Environment as "root". Then when I invoke SMC it works for everything except trying to open User Maintenance - then I get the error above.
I came across something quite by accident whilst I was being advised to make edits to /etc/hosts (which I dont think made a difference anyway so I wont mention them)
If I use my X-Windows client and open Common Desktop Environment as an ordinary user (say "joe") - then invoke SMC from the menu - when asked by the SMC utility to provide a logon then (as you would) enter the root username and password, guess what ! - I could open the User Maintenance icon without the error appearing and make changes and save them.
Funny how a less privileged user than root invoking CDE seems to provide a basis to get the option to work! I still get the error by using CDE as root
Wanna Try it?

Error during acquisition transfer: Depr. area does not exist

Hi,
I am getting following error while posting WBS through CJ88
Message no. AAPO107
Diagnosis
According to the specifications for transfer variant 5, depreciation area 30 should be transferred gross. However, the recieving asset 3300053-1 does not manage this depreciation area.
Procedure
Check the transfer variant and the receiving asset.
Can you please help
Thanks

This is probably a question best for the asset section but check the Depreciation areas tab on the asset AS03 and see if it has depreciation area 30.

Error Program SAPLRSDRC does not exist

Dear Experts,
While executing a query am getting an error like as follows : -
- Error Program SAPLRSDRC does not exist
- Eror An exception with the type CX_SY_PROGRAM_NOT_FOUND occured.
Can anyone please guide if any one have facse this kind of issues.
Regards,
Hemanth Aluri

Hi Chandran.
Thx for Reply. We are currently working on BI 7.0 Only.. Actually we doing Upgradation project.. So We have taken the 3.5 DEV system Copy which we say it as some XXX system.
Now Currently Am checking this report in QUALITY System.. When i checked in SE38 for the Program SAPLRSDRC It says the program does not exist.
But When i checked it in XXX Dev System which is 3.5. I have got that program. But actually it is an function pool.
So can u please guide me in this scenario how to step further exactly..
Regards,
Aluri

The RFUMSV50 program does not generate transfer lines of deferred VAT

Hello;
The RFUMSV50 program does not generate transfer lines of deferred VAT ,
The context is the following one:
Code VAT Created with code target VAT, general account of VAT also created,
Rule of deferred VAT created and activated for the company code in question, with marks to compensate for check.
The data of tests are the following ones:
Creation of an invoice via the FB60,
Integral payment of the invoice via F-53,
Creation of the confirmation of the operation in bank via the manual statement FF67,
Clearing of the intermediate banking account with the bank account via F-03.
After all these elements, by executing the RFUMSV50 program, I have nothing in result.
There somebody who had the same problem, could help us?
Thank you.

Hi
Service Tax credit cannot be utilized unless the Vendor Invoice is Paid. This is the reason till the payment is done the service tax Amount will be accumulated in deferred tax account and once the invoice is paid the balance in deferred tax is need to be transferred to respective Service Tax , Educational Cess and higher Education Cess account. There can be various business scenarios for full and Partial Payment to facilitates the transfer of such deferred balance to respective account SAP has come up with some new standard program RFUMSV50 instead of RFUMSV25. To overcome the limitation of this program i.e. not able to take care of more than one tax line item, below the solution is provided with scenarios “Full Payment is made to Vendor Invoice”.
hope this is help ful
thanks
Trinath

My Firefox version is 13.0.1, I use Windows Seven 64-bit, when I click on Firefox, but the program does not run! But Firefox is seen in the list of Windows proc

My Firefox version is 13.0.1, I use Windows Seven 64-bit, when I click on Firefox, but the program does not run! But Firefox is seen in the list of Windows processes, while Firefox does not run.
I manually deleted Firefox from the list once I have Windows processing.
And when I clicked on Firefox, Firefox will open quickly and easily.
Firefox process in Windows Processes names list called "firefox.exe * 32" is.
Please try to solve my problem, my problem is how to solve?

Hi, are you saying that you start Firefox and it stalls -- you can see it in the Task Manager but it never displays -- but if you kill that process and start Firefox again it starts up properly that second time?
If you look at the statistics available in the Task Manager's processes tab such as bytes read or other bytes, can you see whether Firefox is doing anything at all? ''Note: You might need to add columns if your Processes tab isn't set up to display statistics. You can do that from the View menu.''
You might already have seen these troubleshooting articles. If not, does anything here help:
* [[Firefox won't start - find solutions]]
* [[Firefox hangs or is not responding - How to fix]]

Program SMIGR_CREATE_DLL does not exist

Hellio
While doing a Hetergeneous System copy of Solution Manager system (Database Independent)
and I am performing the Step to generate DDL.
When I execute the SMIGR_CREATE_DLL ,
I get the message "Program SMIGR_CREATE_DLL does not Exist".
Can anyone suggest since this is SAP Standard program, how do I generate DDL required for the system export?
Thanks

Hi,
> When I execute the SMIGR_CREATE_DLL ,
> I get the message "Program SMIGR_CREATE_DLL does not Exist".
>
Program is SMIGR_CREATE_DDL not SMIGR_CREATE_DLL.
Thanks
Sunny

"Action does not exist error" during country transfer action

Hello, everyone.
We are on ECC5.0 with MGE. Recently our users are getting an error - "Action does not exist on mm/dd/yyyy" when they perform a country transfer action (transfer from country A to country B). Because this is a hard error, the action is stopped and our users have to re-execute it. Surprisingly, the action works fine for the second time.
The error comes from message class PG no. 022 in the Include program MP000040.
We raised this issue to SAP but all they told us to look into our user exits. We were told to remove our exits entirely to see the error happens. The problem is that this error does not happen each time.
Has anyone experienced this error? If so, does anyone know why this is happening and how to resolve it?
We tried to debug the code step by step and came across CPREL is filled with "02" in OBJPS for infotype 0000 in the program FP50MF10. We have no idea as to how the OBJPS is filled with a value. Infotype 0000 is not supposed to have this field populated. We think this is the root cause of the error. But why does it happen?
Any help will be greatly appreciated.
Regards,
Noriko

Hi.
We use both PBAS0001 and HRBAS00_CCHANGE.
Noriko

MDS Configuration Manager Create Web Application = Unexpected Error, Keyset does not exist (HRESULT: 0x80090016)

we are having Problems installing MDS on new sever.
Server: Windows 2008 R2
SQL Server 2012 SP1 (Developer Edition)
In the Master Data Services Configuration Manager Wizard ...
- DB Creation (Database Configuration) was succesfull
- But we are stucked in the "Web Configuration", "Create Application" failes in both cases (Choose "Create new Website" or choose existing site like "Default Web Site")
Error Message is alwasy:
Unexpected Error - An unexpected error occurred: Keyset does not exist (Exception from HRESULT: 0x80090016)
Any ideas? Are there any Extended logs created by Wizard activity? Windows Application Eventlog Shows nothing!

Hi,
Just a gut feel. The issue may lie within IIS. I base this upon the fact that your database was created. The second part, the web configuration is related to IIS. SQL Server 2012 should be set up with IIS7 or better still IIS8.
This said..
Is IIS installed correctly? You can always de-install it and re-install it via the programs / windows features option off of the control panel.
Out of curiosity, did you by any chance have a previous 'bad install' of MDS. If so this may be a registry issue. When one starts talking 'Keyset', the registry comes to mind. A orphan keyset which is being called.
Also remember that in setting up the web application, that the installation will ask you for a User ID and password. If you are like us, our passwords change each 6 weeks and this create problems with bringing up the Master Data Manager AFTER a password
change. In fact I have often resorted to creating a 'new web site' with each password change BEFORE I decided to opt for using a Process ID, with an non expiring password to do your web configuration.
I do not know if I have answered your question, just a gut feel. Please do let us know if the steps that I mentioned resolve your issue.
Sincerest regards
Steve Simon SQL Server MVP

DP Mass Processing error Variant &0000000000322 does not exist

Hi,
When I double click on the process chain which is created already in transaction RSPC, the system displays message Variant &0000000000322 does not exist.
Please help to resolve this issue.
thanks and regards
Murugesan

Hi,
Variants starting with & are temporary variants and are not transported from one system to another. So if you have transported your process chain from one system to another, the chances are the temporary variants have not been transported.
So pls change your process chain to use a more permanent variant. You can create permanent variants for mass processing jobs as follows.
Go to SE38, type program name as /sapapo/ts_batch_run. Click on variants and create variants with the relevant info.
Hope this helps.
Thanks
Mani Suresh

The extraction program does not support object ZTD_AW_17

Hi friends,
When doing extraction I am getting the below error.Please
see the below extract of system response.
"The extraction program does not support object ZTD_AW_17
Message no. R3 009
Diagnosis
The application program for the extraction of data was called up using the invalid InfoSource/invalid InfoObject ZTD_AW_17.
System Response
The data extraction is terminated."
Please help me out.
thanks
Venkat

Hi Venkat,
Have you checked to see if the ZTD_AW_17 infoobject is in your system and active? If not, transport the object from your D system to the P system. Also check the infosource to see if it is active and if the ZTD_AW_17 infoobject is there. If so reactivate the transfer rules and run the extraction again.
Aaron

After updating Photoshop yesterday the program does not open anymore. Program does not respond

After uodating Phtoshop yesterday, it does not work anymore. Program does not respomd

Thanks for your help! I tried your suggestion but only switched off the firewall (although just swichting-off of the firewall may not help). This did not solve the problem.
But! I was able to solve it! A friend came up with the idea. It was a profile problem. Somehow, the profile information must be damaged (and he explained me, that this ocures sometimes when updating from firefox 3 to 5). I dont know what is going on there. However, after creating a new profile everything was alright and firefox 5 works now!
If firefox does not open and you want to create a new profile:
-right click on the firefox icon
-properties
-shortcuts
-check if the "target" is correct (the exe.file is at this place on your machine)
-if yes: add after the target: [space]-p
-apply and ok
-now start firefox, this will open the profile manager
-create a new profile
-apply
-open firefox again and it will work (at least in may case).
Hope this is a help for all who have the same problem. I am very happy now and looking forward to enjoy firefox 5.
Thanks a lot! And good luck for everybody trying to solve computer problems!

SOP to Demand Management - Mass Transfer -RMCA0766 - Program does not exist

Similar Messages

Maybe you are looking for