Sophos AV max scanning size / timeout

Hi,
I haven't found any changeable settings for max. scanning size or scanning timeout on a S160 v7.1.3 with Sophos AV.
In the GUI under "Security Services-->Anti-Maleware" it shows "Object Scanning Limits: Max. Object Size: 32 MB".
I'm not able to change it. This parameter seems not to belong to the Sophos AV.
I can change it only after enableing Webroot or McAfee first.
The CLI has no commands for adjusting AV settings.
How can I control the max. scanning size or scanning timeout with Sophos-AV?
Has it fixed values for it?
Does anyone have an idea, how it works?
Kind regards,
Manfred

With administrator rights, the value should be editable. The object size is applied to all scanners which have been licensed and enabled on the appliance.
~Tim

Similar Messages

SharePoint - Error_1_Error occurred in deployment step 'Add Solution': Timeout expired. The timeout period elapsed prior to obtaining a connection from the pool. This may have occurred because all pooled connections were in use and max pool size was rea

Hi,
I am Shanmugavel, SharePoint developer,
I am facing the below SharePoint 2013 deployment issue while deploying using VS2012.
If i will deploy the same wsp or existing wsp
(last build) using direct powershell deployment, the solution adding properly, but the same timeout exception coming while activation the features. Please find the below error.
I tried the below activists:
1. Restarted my dev server, DB server.
2. tried the same solution id different server
3. tried existing wsp file (last build version)
4. Deactivated all the features, including project Active deployment configuration.... but still i am facing the same issue.
I hope this is not coding level issue, because still my code is not start running, before that some problem coming.
Please help me any one..... Last two days i am struck because of this...

What you need to understand is the installation of a WSP does not do much. It just makes sure that you relevant solution files are deployed to the SharePoint farm.
Next comes the point when you activate the features. It is when the code which you have written to "Activate" certain features for your custom solution.
Regarding the error you are getting, it typically means that you have more connections (default is I guess 100) open for a SQL database then you are allowed to.
If you have a custom database and you are opening a connection, make sure you close it as well.
Look at the similar discussion here:
The timeout period elapsed prior to obtaining a connection from the pool. This may have occurred because all pooled connections were in use and max pool
size was reached[^]
I would suggest further to look at the
ULS logs[^] to get better insight.
Manas Bhardwaj's Stream : www.manasbhardwaj.net

The reporting service web service connection pool reached the max pool size

I got a problem that it throw an exception "The timeout peroid elapsed prior to obtaining a connection from the pool. This may have occurred because all pooled connection was in use and max pool size was reached."
The satuation is our service use 15 thread to render report, but sometimes we met such exception I list above. I didn't change any configuration in rsreportserver.config, and it seems the connection to reportserver database from reporting service web
service was not disposed.
Is there any configuration I can modify to fix this issue?

Hi Dexter,
In your case, we can try to increasing the size of the connection pool to resolve the issue. By default, the Max Pool Size is 100. You can refer to the similar issue below:
http://social.msdn.microsoft.com/Forums/en-US/c57c0432-c27b-45ab-81ca-b2df76c911ef/timeout-expired-the-timeout-period-elapsed-prior-to-obtaining-a-connection-from-the-pool?forum=adodotnetdataproviders
Since the issue is related with ADO.NET. I suggestion you post the question in the following forum:
http://social.msdn.microsoft.com/Forums/en-US/home?forum=adodotnetdataproviders
It is appropriate and more experts will assist you.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

[svn] 3337: Minor fix to an earlier check-in on FlexClient max-queue-size.

Revision: 3337
Author: [email protected]
Date: 2008-09-24 12:58:27 -0700 (Wed, 24 Sep 2008)
Log Message:
Minor fix to an earlier check-in on FlexClient max-queue-size.
Modified Paths:
blazeds/trunk/modules/core/src/flex/messaging/config/ServerConfigurationParser.java

MatejLach wrote:
clamd is running, user and group clamav all have the relevant permissions as far as I can tell, however upon scanning my mail, I always end up with the following error:
Scanning error:
/home/username/.claws-mail/mimetmp/0000000e.mimetmp: lstat() failed: Permission denied. ERROR
Seems like a permissions error to me... maybe check the actual file it is attempting to scan... I know it is in your home folder, but just to be sure, you might want to check that everything is sane.

Not able to see max, pref and timeout value in the debug output

Hi,
I have enable connection pooling for the ldapcontext. and have set init, pref and max pool size as 1,3,5 respectively.
However when i am running this program i am getting following output...
Also it is returning me busy connections some times?
I am using auth type as 'none simple' and protocol as 'plain'. [i am using jdk 1.5.0_2].
What can be the problem?
=======
***** start *****
idle timeout: 0
maximum pool size: 0
preferred pool size: 0
initial pool size: 1
protocol types: plain
authentication types: none simple
anonymous pools:===== Pool start ======================
maximum pool size: 0
preferred pool size: 0
initial pool size: 1
current pool size: 0
====== Pool end =====================
simple auth pools:
===== Pool start ======================
maximum pool size: 0
preferred pool size: 0
initial pool size: 1
current pool size: 0
====== Pool end =====================
***** end *****
LdapPoolManager: using authmech: none
com.sun.jndi.ldap.pool.Pool@14693c7 {}.get(): ldap.openldap.org:389:plain:
=======

Hello Prakash,
Thanks for the reply
I am able to see the mail in SOST but when I click on the Display Document to see the content of the mail then I am getting this error of 'you are not connected to the internet'
My Program is to put the logo in my email body
I am sending you the attached image

HP Office jet pro scanning size issue

I have a HP Officejet Pro 8500
When scanning to my computer to a .pdf it always results in an 8.5x14 document not an 8.5x11 document
(and this happens regardless of whether I scan a book page with the scanning lid open or an 8.5x11 single page original with the scanning lid closed)
Using the HP solution center Scan Settings - I cannot find any possible place to change the default settings to force it to scan to an 8.5x11 size
I have looked at the Adobe help which tells me to find the place to change my scanning default settings (under File -> Create) but I do not have a Create option under my File menu in Adobe (I believe I just have the basic Adobe reader)
And I cannot see how to change the properties of .pdf in Adobe to change the size from 8.5x14 to 8.5x11
I have no idea where else to look to figure out how to fix this
Anyone have any other ideas?
(and I am running an HP computer with Windows 8.1)
Thanks.

Hello there! Welcome to the forums @SKMgherkin ,
I read about how you cannot scan in letter size and only in legal size from your Officejet 8500 model. I will certainly do my best to help you out!
I would like to ask if you could post me back a screen shot of the scan size settings you are able to see in the Solution Center software.
Also try running the Print and Scan Doctor tool to see if the tool will correct the settings in the software.
Hope to hear from you!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

"max-pool-size" what is it good for?

SCreator simple CRUD use:
After a while I get:
" Error in allocating a connection. Cause: In-use connections equal max-pool-size and expired max-wait-time. Cannot allocate more connection"
Which is odd, because its just me using the server/database. It looks like every tiime I run a test, another conection is lost.
Do I have to restart the server? Is there a way to say "its only me, reuse a single connection"
why does "connection pooling" make life harder?
Can I turn it of?
cheers
cts

I got the same error in my JSC project. I search for few days and i found the solution. I do a mistake in my page Navigation. I forgot a slash in <to-view-id>.
A bad example:
<navigation-rule>
<from-view-id>/*</from-view-id>
<navigation-case>
<from-outcome>page13</from-outcome>
<to-view-id>page13.jsp</to-view-id>
</navigation-case>
A good example:
<from-view-id>/*</from-view-id>
<navigation-case>
<from-outcome>page13</from-outcome>
<to-view-id>/page13.jsp</to-view-id>
</navigation-case>
with this mistake, the afterRenderedResponse() was never called, and the ResultRowSet was never closed.
Korbben.

Need info about max HDD size available for Satellite Pro M30-813

Hello,
The following question is mainly to be addressed to authorized Toshiba support personnel. What exactly is the limitation of a maximum size of an internal HDD that I could use with my Satellite Pro M30-813?
Recently, I have bought and installed seagate 160 GB SATA drive, onto which I have successfully installed WXP Pro and have been running it for quite a while with no problems. Recently, I have been copying large amount of data from an external hard drive to my new internal disk, and as the files were being copied as I noticed having about 50 GB free space left, I had experienced windows "delayed write failed" and a massive partition failure with no possibility to recover data. The system would no longer boot and the whole MBR was damaged. As the result, I have lost all data on my new disk.
Although, I realize that Toshiba is not responsible for additional hardware that I use with my laptop and that is not officially supported by Toshiba, I am certain that as an end user of a Toshiba product I have the right to know about a max HDD size limitation information for my notebook model. Therefore, I request Toshiba technical support representative to give me a straight official answer to my question.
Thank you in advance,
Andrejs
(You may also contact me privately at my e-mail address)

Hi Andrew
> The following question is mainly to be addressed to authorized Toshiba support personnel
I think you are in the wrong area if you are looking for an answer from an authorized Toshiba support.
This is a Toshiba user-to-user forum! You will meet here Toshiba notebook owner and enthusiasts who share knowledge and tries solve problems but nobody from Tosh :(
I could provide my experience with the M30 Satellite and the HDD upgrade possibilities.
In my knowledge the Sat M30 supports a 40GB, 60GB and 80GB HDD for sure.
In my opinion you could use the 100GB HDD but bigger HDDs will not run and functions correctly.
So switch to a lower HDD size and enjoy the notebook!
Ive goggled a little bit and found compatible HDD and the part numbers
HITACHI GBC000Z810 -> 80GB
HITACHI GBC00014810 -> 80GB
TOSHIBA HDD2188B -> 80GB
HITACHI G8C0000Z610 -> 60GB
HITACHI G8BC00013610 -> 60GB
TOSHIBA HDD2183 -> 60GB
TOSHIBA HDD2184 -> 60GB
I hope this could help you a little bit!
Best regards

How to set max-heap-size outside the jnlp file?

Due to bug_id=6631056 It may not be possible to specify max-heap-size within
the JNLP file for certain jnlp java applications.
Are there other possibilities to specify this Jvm parameter?
In the ControlPanel there is the possibility to specify Xmx for applets but not for jnlp.
I have tried to add properties like
"deployment.javaws.jre.0.args=Xmx\=128M" without success
Many thanks

Even in JNLP also you can specify the max heap size
<j2se version="1.5+" initial-heap-size="128m" max-heap-size="512m"/>
Thanks,
Suresh
[http://sureshdevi.co.in|http://sureshdevi.co.in]

Different max photo sizes in emails, beams, photo stream?

I've noticed differences in file sizes when emailing photos from the iPhoto app, when inserting in an email, and when emailing directly from the photo. I've found that iOS 6 is able to send the largest file when inserting it into an email. If I select email from iPhoto, the full size option is a fraction of that. If I email a photo directly from the photo itself, the full size seems to be somewhere in-between. I sent a panoramic photo three times, once using each method. Each time I selected to send the FULL file sizes, and each time they were different:
iPhoto: 1918K
insert in email: 12004K
email from photo itself: 3529K
Is there a reason iOS 6 does this?
Why are the full photo file sizes not universal?
Are the max file sizes being uploaded to photo stream?
What is the best way to get the largest photo jpg off of the iPhone aside from syncing?

John,
You have several options for re-sizing photos, though (continuing from what V.K. has already stated). If you want to "customize" the size of each photo, you'll need to do so before you attach them to an email. They can be re-sized in iPhoto, or they can be opened in Preview and exported as whatever size you like.
If your images are in iPhoto, select one, then choose File>Export. Use the export dialogue to select the size and compression of the resulting file, save it to someplace like your Desktop, then attach it to an email. The choices, here, are the same as they would be within Mail, but will be applied on an image-by-image basis.
Scott

What is the max file size that a Adapter Engine [J2SE] can handle ?

We are having a scenario where a 4 GB compressed file needs to be sent across without mapping, I'm trying to explore the possible options to tackle this scenario.
Some of the options, we are considering :
- Sending a file from one Adapter Engine [J2SE] to another Adapter Engine [J2SE] bypassing PI. Adapter Logs will be monitored. What is the maximum file size that can be then handled assuming a standard installation ?
- What is the max file size that Adapter Engine [J2SE] can send through PI without mapping?
Any help with the above options or with any other possible solutions to handle extremely large file transfers will be much appreciated.

Hi,
j2se is not a good option here
if you have 4gb then you need a copy solution
a) build an proxy that will just copy the file from sender dest to receiver
b) build an adapter that will do the same as proxy)
this way processing of this message will be controlled with SAP PI/XI
it will be as quick as copy & paste of the 4gb file
I did the a) for one of the flow for 300 mb and it works perfectly
Regards,
Michal Krawczyk

Automation in saving a image file with a specific max file size

Hi everyone,
I hope someone can help me by this.
Background info:
We got several image files every 2 weeks which should be edited and mainly reduced in size for web purpose. This work needs 1 work day for one man/woman to do, because he/she has to open the file save for web and then set the quality to a value were the file is nearly about 150-200 KB in size.
The images are different, some have few colors, some have a lot of colors and there are also different in resolution. But they should not be reduced in resolution, only in quality. All other specs of the image should be kept
Is there any possible script, plug-in or similar which can do the same (Saving with a specific max. file size) in some automatic and faster way?
Any help is really appreciated!
Thanks in advance!
Kind regards
Packesel

*push*
Hi everyone,
I still need help with this. Is there any tool (OS X) or script for Photoshop who can fulfill this (see title).
ANY help is really appreciated!
Thanks in advance.
Regards
Packesel

How to calculate min/max scan rate of PCI-MIO-16XE-50

My board: PCI-MIO-16XE-50 , 20MHz timebase
The min/max scan rate is0.00596-20K scan/s and the channel rate is 1.53-20Kchannels/s
How do they calculate these data?

Hi May
Check out the knowledge base locate at http://digital.ni.com/public.nsf/websearch/EA4E306828AF05B586256B8F00661A8B?OpenDocument . I think it answers your question.
Serges Lemo
Applications Engineer
National Instruments

What is te max. file size for lightroom

i have some very big files. lightroom says that the are to big to catalog. but what is the max. file size ?

There is no MAX file size.
As John points out, the limits are on the number of pixels, not file size

Max locate size

hello, does anyone know the max locate size that a SNASw router will set for the locate process ?
For VTAM is 16K, for the Cisco Snasw ?
I can't find this on the doc and I think my "location" problem depends on this.
Many thanks in advance to the people that will reply.
Cheers, Alex

Hi Alex,
in IOS 12.1 and 12.2 snaswitch is bounded by a locate size of 1K, which means if you have more than 8-10 uplinks defined you may run out of room and encounter less-desireable session paths or outright session failures.
An enhancement was added in IOS 12.2T to make the size 4K. If you want to stay with IOS 12.1 or 12.2 (because they are more stable than 12.2T), you can work around the problem by only configuring uplinks to your primary NNS/DLUS and backup NNS/DLUS, and use connection network for all other uplinks (vnname on port). Then snaswitch would only include 3 tail vectors in each locate (one to the primary, one to the backup, and one to the virtual routing node.)
- Ray

Sophos AV max scanning size / timeout

Similar Messages

Maybe you are looking for