Sophos Endpoint security: Block all websites except one

I've been trying to find out how to block all websites except one, in an end user, by creating a policy in the Sophos Enterprise Console. I can see an option - Full web control but it requires an appliance. My question is, it is possible block all websites except one with Sophos? I appreciate if anybody knows, and can tell me how. I have downloaded the trial version of Sophos. If it's possible, I'll try Sophos ES for a year, for the end users and servers. 
This topic first appeared in the Spiceworks Community

Team Folder in the past was managed by administrators. Administrator can create, edit, delete team folders. The team folder can be published to a group of users, including Active Directory group. It is very convenient to share files and folders with a group of users in the same team. As team groups bigger, it may not be convenient for administrator to manage all the team folders. So it makes sense for administrator to assign some users to be able to manage team folder that they own themselves. Role Manager It usually starts with the role manager by creating a role with Add/Edit/Delete permissions and assign it to users or Active Directory groups. Manage Team Folder The user who are in the private team folder role will be able to manage team folders without seeing all the team folders from everyone. Here is a YouTube Video about...

Similar Messages

  • Cisco 5510 blocking all websites except a few

    Hello:
    I see many post about how to block a single website, but I want to do the opposite. I would like to block all website except for a handful of them. Does anyone have any example configs?

    Hi,
    Yes you should be able to:
    http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080940e04.shtml
    Of course, you will need to create some soft of regex that will deny all the websites such as *.com, but first of course permit the websites you want.
    Another option will be using FQDN acls (Only supported on version 8.4.2 and higher) Here is the example.
    https://supportforums.cisco.com/docs/DOC-17014
    Cheers,
    Mike

  • Block all URL except one or two in WRSV4400N

    Hi,
         I have a WRSV4400N router and I need to block all URL except one or two. Can I do it with or whitout TrendMicro ProtectLink??
    Thank you

    Hi Axondigital,
    Your english is very good.  I did say "check and see"  in my earlier post and not here is a solution.
    To answer your original question , the answer is NO.
    URL filtering is a limitation you will find in a product like the WRVS4400N, but you will not find that limitation in the new and more powerful SA520 which has an URL allowed and blocked list.
    My advice would be, evaluate trendmico protectlink if you wish and see what you think.  send a email to the following address to get a evaluation license;
    [email protected]
    But try a SA500,  if that customer  really needs a low cost, but capable router that requires URL allowed list.
    regards Dave

  • Block All Websites except for a few

    I have a Linksys WRT54G router. I just got my 7 and 9 year old kids a computer. I need to block all websites except for about 5 - 10 websites that my wife and I let them visit. I don't think I can do this with the WRT54G router, but does anyone know how I can do it.
    Thanks,
    Skooter Columbo

    unfortunately, on wrt54g routers, you can only block and not allow websites.
    and to block websites, you can only put up to 4 websites which is what you do not want to do. cause you said you need to block all websites except for 5-10 sites.

  • Blocking all websites except a few + Skype and other chat programs

    Hello,
    Can you tell me how can i block all websites from a network except a few of them using a Linksys wireless router?
    Also, i need to block several ports used for Skype and other chat apps.
    I want this solution to work for the whole network. Not using windows policy or other ways where i'd have to go to every single computer.
    Thank you.

    There's a way on how to do that but it depends on the model number of your device. What's the model number of your router anyway?

  • From external: block all domains except one MAPPINGS file?

    Here's the problem...
    I have an old domain that my mailserver is still authoritive for. We receive mail through a mail ISP cluster, in that sense that our internal mailserver does not have any MX-records associated with it. All MX-records point to the ISP.
    We have recently changed domain name because of a merger.
    I am still rewriting all RCPT TO: [user]@olddomain.com to RCPT TO: [user]@newdomain.com in imta config.
    I now want to end that rewriting using the mappings file for all except but one domain.
    So the end result should be:
    MAIL FROM: all domains -> [user]@olddomain.com REJECT $Netc......
    but!
    MAIL FROM: specific domain -> [user]@olddomain.com should still be passed on to the IMTA.
    I have used SEND_ACCESS before as a method of blocking mail, but this is specific... I want to block the whole world except one originating domain (for the old domain)
    Does anyone have a working example of this and could you provide it for me?
    TIA
    Eli

    Jay :-)
    We have reinstalled iPlanet Messaging Server 5.2 on Windows Server using all new servername FQDN and all new domain hosting for.
    FQDN: mail.new-domain.local
    Mail authoritive for: new-domain.com
    Server is located on the LAN and gets it's mail from an ISP using mailkick.
    Server is actually not aware (neither in MX, nor in LDAP records) of the old domain.
    The only way the server gets it's mail is through smart-hosting. It just works and acts as a new server. Mail for the old-domain.com (organization) is accepted because I rewrite the domain part of the old-domain.com to new-domain.com
    old-domain.com $U%[email protected]
    Server accepts mail from all sending/origination domains only for the TO: new-domain.com it is authoritive for.
    Now here is the catch... I want to disable the TO: domain-rewriting, because people need to use the new-domain when addressing us.
    There is still only ONE organization out there that needs to address the old-domain.com because of X.509 encrypted mail. This is the only domain I will do rewriting for.
    Hence is why I was looking at the SEND_ACCESS
    It has some ways of blocking part of a sender or address part of a enveloppe based on wildcards etc....
    Yet only blocking....
    How do I block the whole world except that old organization we still do business with. Mail for the old domain is also delivered through the same mailkick by ISP.
    So if whole world -> [some user]@old-domain.com REJECT
    and
    single organization -> [some user]@old-domain.com ACCEPT and continue REWRITING
    Hope I shed a bit more light on the subject....
    Eli

  • I can access all websites except one any ideas please I have a imac 10.9.4

    I have favourite sites but I find that one site in particular can not be accessed all others can

    Hello Linc and Eric thanks for your help.I had a think in my sleep and came up with the following.
    If I accessed a few days back in my history files the website in question then it should work as this was before my problem.
    This worked so I have mow circumvented whatever it was in the (Router/modem/internet section of Imac) that is causing the issue.
    So will keep this in mind and continue to get rid of problem but at least I have a work around.
    Thanks guys

  • WRT110 works for every website except ONE after login, help please

    I have a WRT110 version 1.0
    It works for every website, except one. And it works for that one website just fine, until I login. When I enter my username/password it accepts it then redirects me to the companies landing page. I can see that because the URL loading changes and it shows the Title in the page which indicates it connected, but then it just sits there 'loading', in the status bar I see the message: "Waiting for tools.domain.com... to load" or something like that. and it takes like 5 to 10 minutes, no joke, then it loads.
    If I connect my computer directly to the modem and bypass the router, then it loads just fine, very fast like everything else.
    But then when I re-connect my router and refresh the page, it does it again, takes forever, but I can instanly see the title of the page in the title bar.
    It works on every computer that I connect trough the mobile hotspot on my 4G verizon phone. but if it is through the router, every computer takes 5 to 10 minutes. Literrally.
    Anyone have this happen to them? If so, how did you fix it?
    Thanks,
    Richard

    Try the following settings:
    # Open up the browser on the desktop and on the address bar type 192.168.1.1 that will open up the Router setup page…
    # Lower the MTU (Maximum Transmission Unit) from 1500 to 1400 or less (usually found on your router's main/ basic setup page)
    # Then click on Security tab disable SPI Firewall Protection, uncheck Filter Anonymous Internet Requests...
    Now check the connectivity status.

  • I am unable to view flash videos from all websites except youtube after updating to Firefox 4. All help will be appreciated. Thanks in advance :)

    I am unable to view flash videos from all websites except youtube after updating to Firefox 4. All help will be appreciated. Thanks in advance :)

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * [[Troubleshooting extensions and themes]]
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
    In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
    * Help > Restart with Add-ons Disabled
    * Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)

  • How to Set Up Content Blocker to Block All Sites Except Those That Are Listed?

    How to Set Up Content Blocker to Block All Sites Except Those That Are Listed by Firefox?

    One other item I thought I would pass along...
    I noticed that the NVG589 gets terribly confused if a device behind it isn't setup properly first to be a static address.
    Here's the behavior: Say you have a router of your own and you intend to give it one of the addresses from your static IP block. You decide to set it up first and don't make the changes initially in the 589 to force it to be a static IP of some kind-- whether in the private or the public block. You configure the router in this case with DHCP. Your router starts handing out addresses in its own IP range however your configured it.
    But look what the 589 thinks is happening: it sees the DHCP client name associated with the same MAC address changing constantly. It makes entries for each different client name in its device list, sometimes aging out, sometimes not.
    Now trying to save the private IP will result in a "missing data" error. Worse, trying to change things to a public static IP will result in similar messages about the IP being in the wrong range.
    The same issue can also occur if the device was setup statically in the private range and you try to change it to a public static IP.
    The only way to fix this:
    1) If you intend to advertise the router on an IP from your static block, disconnect all devices from the router and the RG, except for the router you want to setup. Wait for the RG to see them as "offline" in the device list. Alternatively, if you intend to setup another device or server on a Static IP, make sure it is the only device connected to the RG.
    2) Switch the IP allocation to "Public"
    3) Renew the lease on the device
    4) Go into the IP Allocation page and fix the IP to one of the public static IPs from your pool
    5) Reconnect all devices.
    Generally, the best practice is to setup each static IP device before connecting any others to the RG.

  • Win 8.1 domain workstation. Block all access, except for a fews users/groups and domain controller information/date.

    Hi!
    Win 8.1 pro, domain workstation. How Block all access, except for a fews users/groups and domain controller information/date.
    Nuance:
    From domain AD is locked Workstation Firewall "Domain profile" edit.
    Possible?
    cenubit

    Hi GirtsR,
    I am not sure the command to use the SID to accomplish what you want to achieve, if you only know the SID, you could take use Powershell to find the related information, more information, please check:
    Working with SIDs
    And a similar thread for reference:
    How to find user/group known only SID
    More reference: Default local groups.
    Best regards
    Michael Shao
    TechNet Community Support

  • Question about import all tables except one

    I have exported all tables for a user. While importing I want to import all tables except one table whose name I know. How do I do this? Example: If I have tables: Employee, address, salary that I have exported. While importing I want to import only Employee and address. How do I do this. The database I have exported contains over 20 tables.

    I don't think it is possible at all, you just need to explicitly specify all the tables.
    If you really don't want to include the single table, then you can import all the tables and drop the desired one.
    hare krishna
    Alok

  • How to  extracting data in all objects except one object?

    hi experts,
    when we are trying extracting(load) data, it should be updated in all objects except one object,what is the procedure, pl anybody can explain step by step procedure.
    thanks & regards
    vijay

    Hi vijay
    By object do you mean infoObject ?..if it is then you can set no update in update rule and do not map in transfer rule...
    Thanks
    Tripple k

  • Moved some Crystal Reports from 8.5 to 10. They all work except one.

    Moved some Crystal Reports from 8.5 to 10. They all work except one.
    The report runs, then stops.
    It brings up the Formula Workshop - Format Formula Editor - Suppress (No Drill-Down)
    Highlights one of the Formula Fields, which is in used as part of record selection, then stops

    Go to [http://service.sap.com]
    In that go to SAP Support Portal ->Help & support tab ->Report a Product Error
    You would have to supply Customer number and User ID and it would allow you to create a case (incident).
    You can also call on our CIC numbers if you face any issues and they would be able assist you in creating an Incident.
    Americas : 1 866 8907686 (toll-free)
    support.bosapamerica@ sap.com (Remove the space)
    APJ: 1800 613459 (toll-free)
    support.bosapasia@ sap.com
    EMEA: 08081012181 (toll-free)
    support.bosapemea@ sap.com
    Hope that helps!!
    Regards,
    Shweta

  • Block all countries but one?

    Our management suddenly decided that some parts of our servlet based web application should only be visible from one country, and visitors from other countries should not be able to see that part of our web application. I have absolutely no idea how to do this. Can somebody point me in the right direction? What would be the general strategy to disallow access to a part of our web application for all countries except one? What is the typical approach to realize something like this?

    [http://www.blockacountry.com/]
    Yes, it's just that easy (to find at least). However, it is not a bullet proof solution. Someone can spoof their IP or use an anonymizer or proxy through the legal country.
    - Saish

Maybe you are looking for

  • SY-PAGNO in TOP-OF-PAGE of ALV

    Hi Gurus,                I am using system field 'sy-pagno' in my ALV TOP_OF_PAGE. the o/p is having 4 Records. here the Prob is page number is shown as 0. how to get the correct numner. hline-typ  = 'S'. WRITE: 'Page No:' TO text,             sy-pag

  • Select statement in ABAP

    Hi,    I have a table with couple of GUID fields. Primary key is the main GUID. I have another field by name temp_guid which can have the normal guid values or 00000000000000000000000000000000. I want to write a select statement as follows: My table

  • Map viewer is not able to parse WMS map request

    I am experimenting with using Mapviewer to deliver WMS data using the built-in WMS support as documented in appendix D of the manual. The Mapviewer version is 10.1.2.0.2. Using the following arguments in a browser window, I am able to receive a map i

  • SAP Netweaver 7.0 Web Dispatcher HA Setup with Sun Cluster 3.2

    Hi, How to HA SAP web dispatcher, which is not mentioned in the guide 'Sun Cluster Data Service for SAP Web Application Server Guide for Solaris OS'. Since I do not want to install central instance within the cluster, should I install two standalone

  • Error when I try to send document to Business Objects Inbox in Infoview

    I am testing XI 3.1 and when I select a Webi document then click on the option to send a document to a Business Objects Inbox, I get the following error: An Error has occurred: Unspecified error. Any ideas?