Sopund Blaster 5.1 VX Not working with Win 7

I have a SB 5. VX not working with Windows 7 , Please reply any comlete solution.

Re: Sopund Blaster 5. VX Not working with Win 7Not sure if you are using the driver available from the support site for Win 7 but if not, you can get it here.

Similar Messages

  • TS1363 ipod classic not working with win xp not sure how to sync it?

    ipod classic not working with win xp not sure how to sync it?

    Have you read this?
    iTunes: How to move your music to a new computer
    http://support.apple.com/kb/HT4527
    The Apple web site has lots of other guidance, for example if you are migrating from Windows to Mac, read this.
    Switch 101: Migrate your Windows files or system to your Mac
    http://support.apple.com/kb/HT2518

  • Speakers on monitor do not work with Win 8.1

    Yesterday I upgraded from Win X - SP 3 (discontinued by Microsoft)  to Win 8.1.  I spent the entire day with a Microsoft technition on-line to figure out how all this works.  One thing he could not get to work was the speakers on my monitor (HP vs 19c). He took over control of my computer to work out the various issues.   I know he went to Realtec to try to find a driver for the speakers but without luck.  The speakers worked before, why don't they work with Win 8.1.  The monitor works fine.  Unfortunately without sound I cannot go through the tutorials to learn more about how to use Win 8.1.
    This question was solved.
    View Solution.

    Thank you so very much.  I installed the driver for Win 8.1 but that apparently was not the problem.  Please forgive me for being so dense.  On control panel I kept seeing the problem  as not having the speakers plugged in.  The other day I unplugged to wire going to the computer and re-plugged it, but that did not work.  This morning I unplugged the speaker wire  from both ends - the computer as well as the monitor and replugged it.  Surprise, I now have audio!!
    What a relief as now I can go through the tutorials and learn how Win 8.1 works though I have already learned a lot by hit or miss.

  • HP 6110 not working with Win 7

    My HP officejet 6110 works fine with two Win XP 32bit systems.  The HP officejet 6110 will not scan with Win 7 pro 64bit system. Tried on three Win 7 system.  The scan starts but just hangs (Scanner software shows it is running in Windows task manager). Also tryed HP Print and Scan Doctor. Doctor keeps blicking the blue arrow pointing to the "Driver check".  Looks like the older 6110  USB is not  communicating with  the Win 7 driver.  HP said to use Win 7 driver but looks like we need a HP driver 

    Give Hamrick a try. (link)
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • Sound blaster audigy 2 zs not working with vi

    ok so my sound blaster worked fine with xp and i upgraded to vista and it isnt working at all. i tried to install the driver from creative's site that is supposed to work with vista. when i run the install it says it is missing a bunch of files like layout.bin and setup.exe, setup.ini,and a bunch of crap like that...i even tried getting these files from somewhere else and putting them in the install folder, it ran without missing files but gave me the same error at the end, I-00. THEN i even tried using the cd it came with when i bought the card on xp, it worked with a few minor errors but at the end it recognized my card but i get absolutely no sound at all...

    The problem you are getting has to do with InstallShield and most probably your?Vista configuration... Make sure you are running as administrator and check the log files in the Program Files/InstallShield... folder to see exactly what files you are missing. There is a Creative Knowledgebase article about it, so do read it. Also do remove any Creative XP software, especially make sure you removed the InstallShield Creative folders (in the same location as above), as these have been known to cause Installation failures.

  • Satellite P105 mat****a dvd drive does not work with Win 7

    Greetings,
    I need an upgrade on my dvd for my vintage Satellite P105.
    I want the fastest dvd burner possible at this time because I am a movie fan and keep them in digital storage.
    1) First should I go get an external drive or can I get top performance with an internal dvd replacement from a parts dealer or Toshiba?
    The problem is when I upgraded to windows 7 things changed. I lost my sound but solved that by using a legacy driver for Visa as apparently the sound "board" on the laptop is made for only Vista. Next I found the dvd drive which is a mitsu****a UJ-450s internal does not work or is extremely slow in backing up movies from discs or files. The available burner software also seems intended for Vista as performance was acceptable then. Even the dvd burner software does not work.
    2) So, my question to the mavens of multimedia is: What should be my next move?
    3) Should I go external and face the USB bottle neck or
    4) go for the bus speed on the internal dvd?
    5) Given that an internal dvd is better as it is exactly a dvd-ram/IDE as it currently is, or some other bus configuration.
    6) Most importantly, what dvd burner would give me 18x speed with current software like ConvertXtoDVD and fit as an external or -- better -- as an internal dvd replacement or my slow drive currently?
    Of course, if you could give me a model number and direct me to sales it would be much appreciated.
    Thank you all in advance.
    Rachel_1

    1) First should I go get an external drive or can I get top performance with an internal dvd replacement from a parts dealer or Toshiba?
    You should know that not all internal ODD>>>>>>>>>>>>>>>>>>>>>ODD?>>>>>>>>>> devices are compatible. You will need to use an compatible and supported ne and such device could be ordered from an local ASP.>>>>>>>>>>>>>>>>>ASP?>>>>>>>>>>>>>>>>>>>>>>>>> >>
    But its more expensive as an external CD/DVD device therefore you could also choose an external one which would be compatible with all possible notebooks and computers.
    Makes sense
    2) So, my question to the mavens of multimedia is: What should be my next move?
    As mentioned. Good option would be to buy an external ODD burner>>>>>>>>>>>>>>>>>>Okay>>>>>>>>>>>>>>>>>>>
    3) Should I go external and face the USB bottle neck or
    External device are compatible with all computers and are cheaper>>>>>>>>>>>>>>>>>yes, but isn't the data thru put slower with an external via USB or should I get firewire?>>>>>>>>>>>
    4) go for the bus speed on the internal dvd?
    If you have the money for an internal device and want to use it only with P105 then you can choose also an internal burner.>>>>>>>>>>>>they are $96 here at toshiba site>>>>>>>>>>>>
    e
    5) Given that an internal dvd is better as it is exactly a dvd-ram/IDE as it currently is, or some other bus configuration.
    As far as I know its an IDE interface but the device would support master or slave or c-sel>>>>>>>>>>>>>>>>>>>what is c-sel????>>>>>>>>>>>>> settings. As mentioned, you have to buy an Toshiba recommended one.>>>>>>>>>>>>>the one sold here would be recommended, would they not?>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
    6) Most importantly, what dvd burner would give me 18x speed with current software like ConvertXtoDVD and fit as an external or -- better -- as an internal dvd replacement or my slow drive currently?
    Look point 5)>>>>>>>>>>>>>>>>so you agree that a bus connection is superior to a USB then?>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
    Thank you for your prompt reply. Could you comment on my questions add to your message?
    Rachel

  • DVD drive not working with win 8.1

    Hi. I have HP pavilion 15-e020TU notebook. My DVD drive worked with windows 7 and windows 8. After upgrading to windows 8.1 , the DVD drive is not working. Windows device manager can find the DVD drive but shows a yellow error mark. I selected "Update driver software" and then "Search automatically for updated driver software" . Then the name changed from "Mitsumi CD drive" to "hp DVD A DU8A5SH". And still not working. I installed the firmware update from http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv481en&cc=us&dlc=en&lc=en&jum... But a command prompt shows "Error: no mitsumi drives found." What can I do now ?
    This question was solved.
    View Solution.

    Hi:
    Try each of Resolution Steps 2, 3, 4 & 5 at the link below.
    One of them normally fixes the problem.
    http://support.microsoft.com/kb/314060

  • New keepassx (0.4.0-1) global auto-type key not working with Win-key?

    After system upgrade in new version of keepassx (0.4.0-1) stop working global auto-type key set previously to Win+K stop working. I tried to set it once more  (menu Edit->Settings->Advanced) but combinations with Win key are not recognised anymore. I am just curious if anybody have same problem. Anyway, I happily downgraded back to keepassx 0.3.4-1 .

    I found it at http://archlinux.alouche.net, got there from Downgrade packages. Direct links: i686, amd64.

  • Mac mini late 2012 not working with small VGA monitor

    I got a mac mini (late 2012 10.8.4 all updates installed) and it is working fine with samsung b2230 via VGA adapter. There is a small VGA monitor (PL8006 max at 1024*768) which works fine when connected  to a PC.
    When I connect the small VGA monitor to mac mini it is not displaying anything (monitor shows blue screen with letters VGA so I assue it is not getting any signal). Mac's resolution is set to 1024*768 with 60Hz (even tried with 800*600 without any success). Monitor is also not working with win 7 installed in mac mini using bootcamp.
    Any thoughts?

    i just found that when the VGA cable of the small monitor is slightly inserted into the VGA adaptor it works fine (this is not usable because there is no way to keep the pins at that level) and when the pins inserted fully / moved little it is not working. Since this happens only between these two devices can't find which one is faulty.

  • I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

    I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

    The sound seems very faint but can here static on playback.

  • My operating system windows XP not working with photoshop cloud, why not?

    I need to add 2 more licences for photoshop cloud and I'm being told my operating system windows XP does not work with Photoshop cloud. We already have 2 pcs using it in our office so why not?
    Please help
    Roy

    Do you have the latest version of iTunes?  If not, get it at:
    http://www.apple.com/itunes

  • Adobe creative cloud eea 1.5 is not working with our asus Eee box , celeron j1900 2.00 ghz, 4gb of ram, 64bit. can settings be changed in adobe?

    adobe creative cloud eea 1.5 is not working with our asus Eee box , celeron j1900 2.00 ghz, 4gb of ram, 64bit. can settings be changed in adobe?

    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Application is not working with mouse

    Dear All,
    We have a strange issue in the our application (Oracle form) in the one of our client machine.
    Some times the forms are not able to work with the mouse but is able to work with the keyboard. After one or two machine restart its again working. When the issue occur we can able to work in other applications using mouse.
    Our Applications server is in Other country and client are accessing from India.
    This occurs for some user and not for all.
    Application server Version          10.1.2.0.2.
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit
    Java Plug-in version 1.6.0_31 .
    Please any info will help us lot.

    Thank you for the quick replies Michael Ferrante and HamidHelal.
    But since its occurring for some users (perticulary indian users) and some times. And also its occurring in production environment not in development environment.
    Even the java control panel is not working with mouse.
    For other country customers everything working fine.
    So its difficult for me to apply the patch with these uncertainties.
    Checking with fresh java installation and let you know the status.
    Thanks.

  • Voice Memo is not working with iOS 8.2

    Voice Memo Records is not working with iOS 8.2. how to fix it?

    Voice Memo Records is not working with iOS 8.2. how to fix it?

  • On updating my iphone it shows no network inspite the sim inserted,now it also not working with itunes.i cant see menu page on display screen

    on updating my iphone it shows no network inspite the sim inserted,now it also not working with itunes.
    i cant see menu page on display screen

    http://support.apple.com/kb/HT1808

Maybe you are looking for