Sorry about the x-post: USB connector lo

The USB connector on my jukebox has popped off the player's mainboard. The result, when I plug the cable into it the there is no connection so I cannot detect the device on the computer.
If anyone has any insight as to where I might get this little dilemma solved, let me know. I don't know if there is any way to just reconnect the USB connector to the mainboard, or if a new mainboard is an option, somehow.
The player works fine otherwise, I just cannot add, change access the contents of the dri've from the computer. I do have an IDE to USB connector device, if there any way to utilize that to access the files to back them up.
Thanks
Scott

Chances are it's broken away from the PCB, so it requires resoldering. You can either get it repaired by Creative, which you should definitely do if it's under warranty. If it's not under warranty you can still get it done as a paid repair by Creative, or you will need to find someone expert in surface mount soldering.

Similar Messages

SQL Format Question (sorry about the previous post)

I'm trying to create a query that will produce the following output:
DNAME ENAME
ACCOUNTING CLARK, KING, MILLER
RESEARCH SMITH, ADAMS, FORD, SCOTT, JONES
SALES ALLEN, BLAKE, MARTIN, JAMES, TURNER, WARD
As opposed to this basic query:
SQL> get test.sql
1 break on dname
2 select dname, ename
3 from dept, emp
4 where emp.deptno=dept.deptno
5* order by dname
SQL> start test.sql
DNAME ENAME
ACCOUNTING CLARK
KING
MILLER
RESEARCH SMITH
ADAMS
FORD
SCOTT
JONES
SALES ALLEN
BLAKE
MARTIN
JAMES
TURNER
WARD
Any suggestions on how to accomplish this?
Thanks in advance!

-- Here is one way to do it in Oracle 8i:
-- First, run the script below to create
-- a concatenation funciton:
CREATE OR REPLACE FUNCTION concatenate
(p_col1 IN VARCHAR2,
   p_table IN VARCHAR2,
   p_col2 IN VARCHAR2 DEFAULT '1',
   p_value IN VARCHAR2 DEFAULT 1,
   p_delim IN VARCHAR2 DEFAULT ', ')
RETURN VARCHAR2
IS
TYPE cursor_type IS REF CURSOR;
c1          cursor_type;
v_sql       VARCHAR2 (4000) := NULL;
v_temp      VARCHAR2 (1000) := NULL;
v_concat    VARCHAR2 (1000) := NULL;
v_delim     VARCHAR2 (3)    := NULL;
BEGIN
v_sql :=
     ' SELECT '   || p_col1
|| ' FROM '     || p_table
|| ' WHERE '    || p_col2 || ' = '''
                  || p_value || ''''
|| ' ORDER BY ' || p_col1;
OPEN c1 FOR v_sql;
LOOP
    FETCH c1 INTO v_temp;
    EXIT WHEN c1%NOTFOUND;
    v_concat := v_concat
             || v_delim
             || v_temp;
    v_delim := p_delim;
END LOOP;
CLOSE c1;
RETURN v_concat;
END concatenate;
--Then to use the function in a query:
COLUMN   enames FORMAT A50 word_wrapped
SELECT   DISTINCT dname,
         concatenate ('ename', 'emp',
                      'emp.deptno', emp.deptno) enames
FROM     dept, emp
WHERE    emp.deptno = dept.deptno
ORDER BY dname, enames
-- results:
DNAME          ENAMES
ACCOUNTING     CLARK, KING, MILLER
RESEARCH       ADAMS, FORD, JONES, SCOTT, SMITH
SALES          ALLEN, BLAKE, JAMES, MARTIN, TURNER, WARD

Sorry about the repeat post,,that wasnt me,,it froze and i just hit refresh

Ok so I know that I need to upgrade from 1GB of RAM to 2. But it used to run just fine with one.MY main thing I do is Run traktor DJ studio with it. I used to be able to run Traktor and surf the web at the same time. I went to activity monitor and looked and it said this
page ins-676.70 mb
page outs 706.54 mb
swap used: 427.25mb
Im aware that anything over 100 page outs is really bad ( I think )
I even downloaded Onyx and did some cleaning & maintence. Traktor is still crashing on me . Heres the error report I got .Ok so I cant see where you attach files at,and I would copy and paste that into this mesage but its like 4 or 5 pages long. Should I do that,PLEASE HELP
Message was edited by: ermac4482
Message was edited by: ermac4482

First off, don't hit refresh.
If it freezes, it might mean there is a RAM problem. It might mean there is insufficient disc space on your system.
It might mean the software you are using hasn't been tested with your operating system.
Onyx actually is counterproductive, as it wipes the very cache files that can help speed the machine. No need to copy/paste at this point. Are you getting a four language screen that tells you to restart?

Pretty basic this, but I'm a total beginner. Can anyone tell me (in simple steps!) how I burn a movie I bought in iMovies onto a DVD? After I stick the DVD in, what happens then? Sorry about the unsophisticated question. Thanks.

Pretty basic this, but I'm a beginner. Can anyone tell me (in simple steps!) how I burn a movie I bought in imovies onto a DVD? After I stick the DVD in, what happens then? Do I have to be in my itunes library first? Sorry about the unsophisticated question. Thanks!

Hello Jackie! (My brother lives in Brussels!)
You may find these helpful:
iMovie tutorials:
http://www.apple.com/ilife/tutorials/#imovie
and also this:
http://www.kenstone.net/fcp_homepage/imovie_09_stone.html
A good guide to iDVD 7 can be found here:
http://www.kenstone.net/fcp_homepage/idvd_07_stone.html
Apple's tutorial on iDVD 07/08 is here:
http://manuals.info.apple.com/en/idvd_08_getting_started.pdf

Sorry for the multiple posts.

I cant delete them as there seems to be no option.
I was pressing the post and it was giving me error but it seems like it was actually working ok, hence the multiple posts.

rhuhman wrote:
>
> Sorry for the multiple posts... I am trying to find the Auto-Reboot
> default options. I would like to change the defaults to a set
> parameter. I am looking at adding a signature to the pop-up message
> and extending the sleep time from 2 hours to 10 hours. I thought it
> was attached to the baseline setting but that didn't change anything.
>
> Can this be changed?
>
> Richard
Hi
I've been looking for this myself but can't seem to find what you are
looking for - which is kind of a problem since it would make it a lot
easier to deploy patches if you did not need to go in and set these
options on every deployment.
Niels
A true red devil...

HT4623 on upgrading iPhone 4 to ios 6 using itunes it returned an unknown error then froze completely. It has the iTunes and USB connector on the screen. Reset is not working, I get the same frozen screen.

On upgrading iPhone 4 to ios 6 using iTunes, it returned an unknown error then froze completely with the iTunes icon and USB connector on the screen. Reset didn't work. iTunes doesn't recognize the devise anymore.

if your computer is not recognizing it, try using a different USB port or different usb cable. if that doesnt work you will need to uninstall and reinstall itunes.

About the failure of USB redirection on the USB 3.0 port (Clientron Corp.)

Dear All,
Below is the result of applying our Intel & AMD based models and the related drivers for testing the function of USB ports with
Remote Desktop Protocol. We have tested the RDP 7.0, RDP 8.0, and RDP 8.1.
Please help to confirm if it’s possible for Microsoft to provide the patch files or such kind of workaround method to support the USB
3.0 port function for Remote Desktop Protocol under Windows 7. Thanks.
Model
Win7
Win8.1
USB 2.0 port
USB 3.0 port
USB 2.0 port
USB 3.0 port
F810
(Intel Bay Trail)
PASS
Applying (Intel) native driver
NG
PASS
Applying (Intel) native driver
PASS
Applying (Intel) native driver
L810
(Intel Bay Trail)
PASS
Applying (Intel) native driver
NG
PASS
Applying (Intel) native driver
PASS
Applying (Intel) native driver
B600
(AMD G-series/eKabini)
PASS
Applying AMD Driver
NG
PASS
Applying AMD Driver
PASS
Applying AMD Driver
Best regards,
Larry Chen
Marketing Div./Product Management Dept.
Clientron Corp.

Hi Larry Chen,
Did you install related USB 3.0 driver in Windows 7 computers? As I know, there is no built-in USB 3.0 driver in Windows 7.
Alex Zhao
TechNet Community Support

Nokia responds to reports about the N900 micro-usb...

Hi all,
we have just received the following statement from Nokia regarding the micro-USB port of the Nokia N900:
We are aware of reports that under certain conditions, the micro-USB port of a very limited amount of Nokia N900 devices can be detached. Product quality is of utmost importance to Nokia and we are investigating this issue further. Consumers who experience this issue should contact their local Nokia customer care. The same warranty applies to the Nokia N900 as with any other Nokia device. We apologize for any inconvenience this may cause.
To find contact details of authorized Nokia Care points globally, please visit
www.nokia.com/repair
I wrote all my posts from 2005-2011 as an "Admin" for this community. I still work for Nokia as an external consultant, so my rank in all posts is now "Employee".

Thanks for your answer vandelay. In regards to getting in a second opinion, first of all there is only one repair centre near my location, and second of all I do not see the point of getting a second opinion in if Nokia hasn't passed out the word that the USB Port flaws have been acknowledged and that they should be covered by the warranty - the Repair centres will simply give me back my device without doing anything since Nokia hasn't given them updated instructions on how to proceed.
Also, my USB Port looks like I have "deliberately" ripped it off, so any engineer will refuse it and tell me the same unless Nokia gives out updates on the situation. I am really bewildered (and slowly getting really annoyed with this) by Nokia's approach: releasing a first statement that they are aware of the issue simply to avoid any resulting "**bleep**storm" is a poor tactic.
I sincerely hope that Nokia will soon clarify this issue and ensure that customers who have troubles with their USB Mini Ports get their devices exchanged/repaired ASAP. More details on the warranty only applicable "under certain conditions" are also needed.
This is my first Nokia device (coming from SonyEricsson), it has been a trip with more downs than ups so far, and the current situation is making me more angry and frustrated by the day, pushing me further away from buying another Nokia device ever again.
For the time being I will send Nokia.be an email (I have contaced nokia.co.uk where I bought the device almost a week ago: still awaiting reply, despite claims that a response will reach me 'within 48 Hours '.) and bring it to their attention. At the moment I do not think the Care Centres are at fault. I do believe that it's Nokia who still hasn't decided how to proceed and hasn't given out any instructions to the Repair Centres yet.
Regards,
shauser

Sorry for the multiple post.

Sorry, I had a wrong feedback of my machine and posted too many times. Go for the
top one that is furthermore completed.

1) This trigger prevents people from changing their password. It also prevents people from creating users, dropping users, or modify attributes of users. That seems unlikely to be what you really want-- why would you want to force a DBA to be involved for a random user to change his database password?
2) Assuming that you are OK with the restrictions in #1, you just need to check the USER function in your IF statement, i.e.
IF( ora_dict_obj_type = 'USER' and USER = 'SYSADM' )
THEN
<<raise error>>
END IF;Justin

Sorry for the second post

Hi,
sorry again i posted here
Edited by: user3266490 on Feb 25, 2010 1:14 PM

Been a few days!
Sorry my post wasn't very clear when I said an audio patch under the set I meant that I created the patch as a child of the set, but it still didn't work. However after a bit of playing I have discovered that it all works if I load a software instrument strip in each patch even if that instrument has nothing assigned to its input. Without it my keyboard doesn't seem to trigger the software synths set at set level. I also had the problem that sustain pedal wouldn't work at patch level, but after view the board I found a solution to that.
So all in all after a bit of teething troubles it now does what I need to do. Thanks very much for your reply and idea, they have made mainstage possible for me to use live!!!!
PS Does it not seem madness that apple haven't implemented a way of making an instrument available to multiple patches without having to load it into memory several times. My IMac has 4gb of ram and even using some disk streaming synths I still fill that 4gb. To have a simple way of ghosting an instruments a channel (i.e. to give control at a patch level of a set / concert level instrument would seem to be a simple task)
Once again thanks very much!!!

Anyone can help me about the driver of USB adaptor CB2

Dears,
I have lost the driver of 'creative' USB adaptor, in which made my USB not work, can anyone give me the link to download the driver?, please.
beautykey

@OP: there is no content in your message, it's just begging. The title
of your topic contains two more or less informative words "PARSING codes".
My question to you is: what exactly do you mean by "PARSING" and
"codes"? Parsing context free (programming) languages? I guess
you're not talking natural languages here because your project should
just take a week to complete. Care to elaborate?
kind regards,
Jos
ps. and why "PARSING" instead of "parsing"?

OA Framework - What is that? (sorry about the dummy question)

Hi people,
I was looking for some information about OA Framework and i saw that it is a "tool" to help me to customize oracle applications, right? But i can do it with oracle forms and customize or create another screens. So what is the difference or why is better to use this "OA Framework"?
Best regards

In summary, OA Framework is the new technology to implement Self-service pages. It WILL NOT replace forms and especially reports OVER-NIGHT but it is Oracle long-term plan for all eBusiness forms/pages. IMO, no new forms will be created in Oracle Forms but they will not be redeveloped in OA Framework unless they really have to. IMO, OA Framework will really need some massive enhancements to replace the functionality provided by the major forms and "work benches" in eBusiness Suite like the HRMS person form.

Sorry for the Four Posts

The site is so slow, I left the page a four times thinking I
wasnt getting posted.

You are not alone. I thought it was just me, but I realize
that I am not alone. It looks like that Adobe is very busy updating
some of content somewhere around the site. But it shouldn't happen
like being so grossly, painfully-slow-as-snail slow!
quote:
Originally posted by:
tron2
The site is so slow, I left the page a four times thinking I
wasnt getting posted.

Cluster & Call by reference ( Sorry for the re-posting)

If this is set to 'true', then what happens when the bean is in a diffent
          machine(Cluster)( Does it automatically passes object by 'value' or still
          tries to pass the object by reference, in which it is going to be a empty
          object )
          Looking at the document provided by weblogic , it looks like it
          automatically passes the object by 'value' even if it is set 'true'(Only
          incase of bean is running in a different container/server)
          Thanks
          
          <!ELEMENT enable-call-by-reference (#PCDATA)>


You cannot pass-by-reference a non-RMI Object across 2 VMs, no matter what the flag is, no matter
          what application server you are running under. An object reference in one VM is meaningless in
          another VM, for they do not share the same memory-address-space.
          Even though EJBs are RMI Objects, their method arguments are not unless you explicitly pass the RMI
          interface.
          Gene Chuang
          Join Kiko.com!
          "lal" <[email protected]> wrote in message news:[email protected]...
          > Is this true for WEBLOGIC server (5.1) ?
          > Does the container automatically switches to 'call by value' mode even
          > though the flag is set 'true' for call_by_reference in XML deployment
          > descriptor.(I know this only arise in the fail over process in a cluster
          > environment)
          >
          >
          > "Rob Woollen" <[email protected]> wrote in message
          > news:[email protected]...
          > > Anytime a call goes over the network, it will be call by value.
          > >
          > > Call by reference is only possible within the same server vm.
          > >
          > > -- Rob
          > >
          > > lal wrote:
          > > >
          > > > If this is set to 'true', then what happens when the bean is in a
          > diffent
          > > > machine(Cluster)( Does it automatically passes object by 'value' or
          > still
          > > > tries to pass the object by reference, in which it is going to be a
          > empty
          > > > object )
          > > >
          > > > Looking at the document provided by weblogic , it looks like it
          > > > automatically passes the object by 'value' even if it is set 'true'(Only
          > > > incase of bean is running in a different container/server)
          > > >
          > > > Thanks
          > > >
          > > > 
          > > > <!ELEMENT enable-call-by-reference (#PCDATA)>
          >
          >

Sorry about the first two help messages

i really have a wierd problem. just purchased wrt54g. completed the setup and i cannot get the wireless portion to work unless i first push the secure easy setup button. but as soon as it quites blinking white and goes back to orange it cuts off the internet. works great hookedup straight to cable and works great hooked up by wire to a port but the wireless doesnt seem to want to work right. also once the system is set up does the router stand alone or does it require a computer hookup. also have not been able to set up the security for log in on the wireless portion . been at it for two days now back hurts and reset button worn out
thanks walter

Set it up manually. Go to http://kb.linksys.com
Take a look at article ID 759, 3967 or search for "how to setup wireless"
Once setup correctly, you don't need any computer connected to the router. It's standalone.
Message Edited by neo27 on 01-05-200712:42 PM

Sorry about the x-post: USB connector lo

Similar Messages

Maybe you are looking for