Sorry, another dumb question.

When I first got my iphone 4s I was able to download a bible. That was great. Now I forget what I did to do that.
I tried to get into the app store and could not connect to the app store. Do I have to sign into Apple before I can access the app store? I just cannot understand why sometimes something works for me and other times it doesn't.
I got help here before and I tried to do it on my own, but I couldn't. Thanks

No you do not have to be signed into Apple to use the App Store.
You must have an Apple ID account and sign in to that on your iPad. See Settings > iTunes & App Store, and login there with yor Apple ID.
However, it sounds like you are have an internet communication problem in that you cannot reach the Apple web site or App Store.
Can you reach other internet sites like http://www.cnn.com/ ?

Similar Messages

Sorry another upgrade question Emagic Logic 6 Platinum to Logic 8

My question here is about upgrading. I have searched the forum and Apples site but have not been enlightened.
A few years ago I briefly used Logic as the front end on a PTs HD system I owned which I still have the dongle for. This was back in 2003. Im pretty sure it was then called Logic 6 platinum and it was before Apple bought Emagic
I no longer have those original disks but I have a hunch they wouldnt be compatible with the newest OS Is that correct?
So, if I go ahead and buy the upgrade how will the software know I'm upgrading if I cant load the old version...which I would rather not do anyway. If I have to produce a serial code that was held on a sticky bit of paper, I dont have that now, and the store I originally bought Logic from has since gone under.
IF I can upgrade, would I get the DVD's with the samples + Manual, or do they send only a disk with the programme.

Correct, you don't need the disks, and you don't need to install old software versions.
When you run the installer, it will ask for your new LP8 serial number, and will then ask you to insert your XSkey so it can check you have a Logic authorisation valid for the upgrade - then it will install LP8, and you will no longer need the key plugged it when running Logic.

Sorry, another /t Question!

When i run my code and have finished incorporating \t the correct way, thanks to cotton, captain morgan and the other fellow ^^; Everything looks fine except one part where \t does not align with the others.
Heres the code and if you scroll down to
Prev Balance: $
Addition Charges: $
What i have to do is line them up with \t, but Intrest for sone reason is off mark, Any other ideas?
import java.util.*;
public class Account
          public static void main(String[]args)
               double prevBalance, extraCharges, newBalance, minPymt;//minPymt= minimum payment
               double interest=.02;//interest is 2 percent.
               Scanner scan =new Scanner(System.in);
               System.out.println("Enter your previous balance:");
               prevBalance=scan.nextDouble();
               System.out.println("Enter additional charges");
               extraCharges=scan.nextDouble();
               interest=interest*prevBalance;
               newBalance=0;
               minPymt=0;
               if(prevBalance>0)
                         prevBalance=prevBalance;
                         newBalance=interest+prevBalance+extraCharges;
               if(newBalance<50)
                         newBalance=newBalance;
                         minPymt=0;
               else if(newBalance>50 && newBalance<300)
                         minPymt=50;
               else if(newBalance>300)
                         minPymt=(.20*newBalance);
               System.out.println("Previous Balance:\t$"+prevBalance);
               System.out.println("Additional Charges:\t$"+extraCharges);
               System.out.println("Interest:\t$"+interest);
               System.out.println("New Balance:\t$"+newBalance);
               System.out.println("Minimum Payment:\t$"+minPymt);
}Thanks again!

\t will generally mean "advance to the next column
that's a multiple of 8."
So if you have
12345\tZ
123456789\tZThe first Z will be in column 8 and the second in
column 16.
I haven't looked at your code to see if that's what's
going on, but that's my guess.
If you want stuff to line up in columns, use
String.format. (Or System.out.printf, if it exists).
http://java.sun.com/j2se/1.5.0/docs/api/java/util/Form
atter.html#syntaxGreat Man Thanks this is why i love this forum everyone is willing to help even if it is simple questions!

Help another dumb question

please help me out here how would i make this class so it reads the class in notepad?
import java.util.Scanner;
public class ch8q3
    public static void main(String[] args)
        int[] validnumbers = { 5658845,4520125,7895122,8777541,8451277,1302850,8080152,4562555,5552012,5050552,7525877,1250255,1005231,6545231,3852085,7576651,7881200,4581002};
        int results;
        int checker;
        Scanner keyboard = new Scanner(System.in);
        //search the array for user value
        System.out.println("enter a charge account number to search for");
        results = keyboard.nextInt();
        checker = sequentialSearch(validnumbers, results);
        //determine if results was found in the array
        if (results ==-1)
            System.out.println("There was no " + results + " in the array ");
        else
            System.out.println("There was " + results + "in the array" + (checker +1));
        //seqsearch
        public static int sequentialSearch(int[] array, int value)
            int index;
            int element;
            boolean found;
            index = 0;
            element = -1;
            found = false;
            //search
            while (!found && index <array.length)
                if (array[index] == value)
                    found = true;
                    element = index;
                index++;
            return element;
}

javakinglow wrote:
please help me out here how would i make this class so it reads the class in notepad?I have no idea what you are asking.

Over heating?sorry another fan question

are these temperatures too hot? they are like this most of the time
http://damon.clickgarden.net/fan.png

First I agree your temps are normal and at the same time look fairly good to me. Second you do not have a problem unless your machine is crashing or shutting down. There are many factors that affect your temperature not just Application/CPU usage. One thing that I look at when judging how normal your temperatures are is the Ambient temp which indicates the air temperature inside of your iMac. In general if your iMac is in a hot environment your Ambient temperature will be much higher. Yours being 27 is quite average for a mid to upper 70's room temperature. You didn't say which iMac you have?
George

Sorry another silly question regarding the VCAP 5.5 related to the vMA

If I remember correctly the vMA got dropped from the VCAP 5.5 exam however it is still in the actual exam lab available to use (feel free to correct me if I am wrong, my brain is pretty nuked at the moment from study).
My understanding is that if I invest some time in using the vMA it may be beneficial can I confirm the vMA is ready joined to a any domain and available to use in the actual exam/lab environment? If so I will try to master it and do everything via it during the next few days

You will most likely be using the vMA appliance during the exam.

Sorry - another masking question o_O

So -- I have a keyframed animation and I want to apply a mask to it, but I want the mask to be stationary (for maintaining a clean horizon line in this case -- pixelated mountains rising and lowering off in the distance). I tried both the Image Mask and the mask tool in the toolbar, but can't seem to get the mask to sit still.
I tried looking through the backlog but couldn't figure it out.
Thanks very much for any help.
Evan

Hrm -- tried that (both using image mask and the mask tool) but no luck. Am I perhaps using the wrong settings on the mask?
I've linked to a screen, which hopefully clarifies things a bit: http://giantmecha.com/uploaded_images/mountains1.png
Thanks,
Evan

Sorry - Another Memory question

Hi everyone,
Reading around here about upgrading memory - especially the "you can install more than the stated 1Gb" - I would like to take the plunge and get 1GB memory for my iMac (user-slot). I've been on the Crucial site and have seen this RAM module: - http://www.crucial.com/uk/store/mpartspecs.aspx?mtbpoid=B20F277EA5CA7304 - for what seems a reasonable £65. Would this RAM be OK in my iMac? - You see I also have an iBook (1ghz G4, 12 inch screen) - So if it doesn't work in the iMac I could use it in the iBook instead - Or if the 1Gb works fine in the iMac I would like to put my existing iMac's user-slot memory (512mb) into my iBook's free slot... If this plan makes sense to anyone??? - I would love to know from any of the experts out there if this plan is viable. Thanks.
iMac 1.25Ghz G4 - 17"LCD Mac OS X (10.3.9) 768Mb / 80Gb HD / SuperDrive

Sounds like an excellent plan. I have 1.5Gb of Crucial RAM in my iMac G4 1.25GHz. (1Gb "Factory" and 512Mb in the "User" slot). I see no reason whatsoever why this shouldn't work. Crucial won't guarantee it to work in there though but they will for the iBook G4.
Here are the fitting instructions:
iMac G4.
iBook G4.
kind regards
mrtotes

Another dumb question about transferring files

OK - so now I'm trying to transfer (as in move) the photos from my laptop to a portable drive in order to move them to my desktop machine. I have Lightroom 2.5 installed on both PC Vista machines. So...how do I do it without messing up my laptop. I am concerned about what happens to the Lightroom catalog when I export them to my external drive.
Thank you,
J.

One way to do this is to run Export as Catalog to the external, including the images, then from the other machine, run Import from Catalog. You can choose to not export the Previews, as they will be rebuilt in the new location. You can then run the catalog from either machine or the external, but subsequent changes in one will not be carried to the others.

Dumb question about cycling a battery. Sorry!

I just received by new mac book pro replacement battery today and I have some questions regarding it. First of all, my original battery lasted 2 yrs, 2 mos. I purchased another apple battery for my 15 inch mac book pro (computer originally purch. Aug. 2007). I've seen on these boards that I'm supposed to "cycle" the battery once a week to get the maximum life out of it. I think a cycle means using the battery until it's power is used up and then charge up to 100% again. Is that right? Anyway, my question is, "What is the proper care for this new battery? Does it damage it to have it plugged in when it is fully charged? Or should I always keep it unplugged and use the battery until it runs out and then charge it again? And what does it mean to cycle it once a week, if I'm already using the battery and recharging it when needed?" Sorry if these are dumb questions. I'm not really computer savvy! Thanks.

You should use the battery for a while every day but not drain it right down, before re-connecting the power and re-charging it to 95%+ this is not a complete cycle but partial/normal cycling.
_Every couple of months_ you should re-calibrate the battery which means you keep using it until it goes into emergency sleep itself (you will see a warning then 5 minutes later it will go off by itself) and then _leave it in this state for at least 5 hours_ before you re-connect the power supply and fully charge it (without unplugging) - this is a proper re-calibration.

Sorry for the dumb question...

Sorry for the dumb question but I've never used two hard drives on a mac. On my second installed hard drive on my new Mac Pro, I can not create a new folder (the option is greyed out). What do I do?

Try this:
Right click (or ctrl-click) and select "Get Info"
On the bottom, under "Ownership & Permissions", make sure that the pull down menu next to "You can" says "Read & Write".
Under details, you can make your username the owner of the disk, with the same access.
You can also click the "Ignore ownership on this volume" if you don't want any of those types of permissions.
HTH!
Brian

Hi,, Sorry because maybe this is a dumb question... I wan...

Hi,, Sorry because maybe this is a dumb question...
I want to know what am I need to do if I want to start selling Voip Telephone system through programming Linksys Voip Telephone System and start offering unlimited national call and assign local telephone numbers from Mexico.
Thanks in advance for your support.

I want to do this using PAP2 and i need to know what am I need to know in order to programm the equipment,,,
Thanks,

Where do I enable HTML view for Mozilla Firefox. Sorry if this is a dumb question.

No answer that I have found online has been any help to me!

It's not a dumb question, but I have a follow-up: is the problem that Firefox is presenting pages with little or no stylization, looking mostly like text with some random images instead of having their usual layout?
Does the problem affect secure sites (address starts with HTTPS instead of HTTP)?
If so, there may be a problem with how Firefox is set up to work with secure sites. Because many popular websites combine content from multiple servers, if you made a security exception for a site, that may not get you all the elements of the page, such as style rules.
More detail if it's relevant. If this is off track, could you describe the problem in more detail?

Two really quick/dumb questions!

Hi All,
I have just bought a new Mac Mini and hooked it up to my Samsung 55 inch TV via HDMI and everything seems do be working great.
My two dumb questions are:
1: where on the new OS (I had a Mac 5 years ago and things have changed) is the top "Finder" bar and "disc" icon to save files?
2: In Safari I do not seem to have a tools bar where I can for example open another tab for a new web page.
Hope you can help a nubby :-)

You are running a Mini so it might be that the screen resolution is not exact for your display. I have used a Mini with a conventional display but not HDTV. You might need to go into the settings for the TV to set the screen resolution to accommodate the mini's capabilities. Sorry that I can't offer more on that score; when I use my Sony Bravia HDTV it is with the iPad2 and HDMI and I have encountered no issues. Perhaps someone else on the forum has better insight into the Menu Bar problem on the Samsung as the principal display.

Dumb question re video card

I bought a radeon 9800 pro graphics card to upgrade my 64mb. stock card and before installing noticed that the new card has one DVI port and one VGA port. the box says it runs dual displays, right now I have dual CRTs running but want to run two flat panels soon.
so the dumb question, can I convert the VGA to DVI with just a cheap adapter and run dual flats without buying an expensive converter for the second VGA port?

Hi Prankster,
you wont be able to get dual digital support from the 9800 ...sorry.
Of course, you might be able to *physically connect* two digital flat panels to the card but one of the monitor connectors will be recieving an analog video input signal from this graphic card.
To get true dual digital support from ATI you would need the 9600 or 9700 Pro graphic cards.
Hope this helps !
Cheers,
Chris Chamberlain

Sorry, another dumb question.

Similar Messages

Maybe you are looking for