Sorry but i must ask abaut K9N Neo, MS-7260 VER:2.0

I have find on this link: http://global.msi.com.tw/index.php?func=downloaddetail&type=manual&maincat_no=1&prod_no=255 some info but still i can't finde
just for VER:2.0 some MANUAL * BIOS * Driver * Utility * Manual * Overview. Can anybody PLS help me with finding the adequate link for my VERsion of mainboard...
:D

Quote from: flobelix on 20-August-07, 23:51:09
It's kind of hard for us to understand you, sorry. I think you want to know if there is a known overheating issue with K9N Neo, MS-7260. Your neighbour told you so as his died because of overheating. Now you want to know whether this could be true or not.
Well there is no real issue. The passive heatsink is not very good and the northbridge gets pretty warm. That would cause trouble if there is not a good airflow inside of your case. But getting to critical temp should only happen in cases with very bad or no ventilation at all. So the K9N very unlikely dies because of overheating. Of course it could when the inside temp gets far too hot what shouldn't happen. Besides you would get instabilities long before it would die. You don't need to worry the dead of the other guy's K9N has nothing to do with a general K9N issue.
Thanx for answer....

Similar Messages

Msi K9N NEO @ MSI 7260 Front Panel Connectors Jfp1/jfp2

hi all..
currently i'm using icute ..0508ULA casing ( as illustrated below.. )
ok..i' ve successfuly connect front usb connectors ( JUSB1/2 ) & working fine..
the problems are : i've two connector like this : ( one with number : 1394 & another with no numbers..)
so,..i've refer to the manual book..but no idea how to connect it..
another thing is...my "power led" not working..." hdd led" & " reset button" working good..
there's 3 connector :
1. power switch ( orange & white )
2.reset switch ( blue & white )
3. hdd led ( green & white )
so how to make my "power led" working or need to modified it..?
( please refer diagram below..for msi k9n neo )
anyone using similar MOBO & case ( msi k9n neo & icute ..0508ULA ) COULD PLS advise me
many thanks..

Quote from: BOSSKILLER on 19-August-07, 15:04:24
so the problem is that you can't find the power led cable from the case? if yes, dunno how i can help with that...
search again for the cable.. must be somewhere in the case...
so the problem is that you can't find the power led cable from the case? if yes, dunno how i can help with that...
search again for the cable.. must be somewhere in the case..
dunno what tips more to give you except to suggest to use better glasses
YES..i dunno whre is it..
will open front panel..to see is this thinggy " hidden"..
anyway thnks BOSS..
will update later..

Dumb question, but I must ask!

I've had this issue before, but my "fix" didn't fix this time... sooooo... here's my layout issue:
I have one frame. Inside this one frame I have a repeating frame. The outside frame has a single "hairline" black line and is set to "expand". Inside has no line, but also set to "expand". When I print my report to a PDF, the inside frame drops down below, or just on top of the outter frame, and part of the line is missing. Very annoying. I'm sure many of you have done this before, so any quick help would be greatly appreciated. My usual fix was to put a dummy frame under the repeating frame, but even that dummy frame overlays the line I need to see from the outter frame.
Thanks,
TL

Thanks for the responses! The anchor did end up working, and FDK, I was referencing the border of a repeating frame, not just a line, so I tried the anchor advice. I still needed to alter the layout even more, as the anchor didn't work for me just using the repeating frame to the outside repeating frame. I put an empty frame under the inside repeating frame, then anchored that, and it worked. Odd, but yippeee!! :)
Thanks again,
TL

MSI K9N Neo MS-7260 - Graphics Card upgrade

Hello MSI community,
At the moment I have got following system
Quote
Operating System
   MS Windows 7 Home Premium 32-bit SP1
CPU
   AMD Athlon 64 X2 5200+   43 °C
   Brisbane 65nm Technology
RAM
   3,00 GB Single-Channel DDR2 @ 245MHz (4-4-4-12)
Motherboard
   MSI MS-7260 (CPU 1)   45 °C
Graphics
   SyncMaster (1680x1050@60Hz)
   256MB GeForce 7600 GT (ASUStek Computer Inc)   42 °C
Hard Drives
   78GB SAMSUNG SAMSUNG HD080HJ SCSI Disk Device (ATA)
   195GB SAMSUNG SAMSUNG SP2004C SCSI Disk Device (ATA)
Optical Drives
   TSSTcorp CD/DVDW SH-S182D ATA Device
   DTSOFT Virtual CdRom Device
Audio
   Realtek High Definition Audio
I'm thinking about getting a better graphic card, could you suggest the very best which fits on this motherboard without any problems? I was looking at GTX 550Ti, but maybe other suggestions?

Quote
'm thinking about getting a better graphic card, could you suggest the very best which fits on this motherboard without any problems?
Any Nvidia cards should works with no problems, however your old system will hold down the peformance if you place too powerfull card.
Basically what video card can handle your system its down to your PSU.
With note that lastest generation ATI cards 5xxx & 6xxx may not work in this old board

MSI K9N NEO - Whats the best geforce ?? MY 6200 LE WONT WORK !

Hi all.
When i turn on the PC with the Geforce 6200 LE in the PCIE slot... the graphics are seriously messed up. red lines and blue bands down the screen and strange characters everywhere.
Only way I could install windows onto the new blank HD was to put in an old PCI graphicswe card and like magic... its normal. Now i used the old card to get me onto the internet and got every new driver for the geforce 6200 LE I could find, but no matter which driver I apply the pc just wont boot with the 6200LE in.
My system spec is
K9N Neo MS-7260
AMD Althlon 64 3200+ AM2
1gb GSkill DDRII 800 RAM
"3DFusion" Geforce 6200LE
Could it be the fact that 3DFusion cards are not compatible with the K9N Neo or nforce 550 and if so... presumably I need either an NVIDIA geforce or an MSI geforce rather than my 3dfusion card ???
So to sum up guys... shall I sell the 3dfusion geforce 6200LE and buy an MSI Geforce.... and if so... which card will DEFINITELY work with the nForce 550 / K9N Neo ???
It seems 3dfusion cards arent compatible with nforce550 or k9n.

Quote from: Steve Kilner on 09-September-06, 04:02:57
Hi all.
When i turn on the PC with the Geforce 6200 LE in the PCIE slot... the graphics are seriously messed up. red lines and blue bands down the screen and strange characters everywhere.
Only way I could install windows onto the new blank HD was to put in an old PCI graphicswe card and like magic... its normal. Now i used the old card to get me onto the internet and got every new driver for the geforce 6200 LE I could find, but no matter which driver I apply the pc just wont boot with the 6200LE in.
My system spec is
K9N Neo MS-7260
AMD Althlon 64 3200+ AM2
1gb GSkill DDRII 800 RAM
"3DFusion" Geforce 6200LE
Could it be the fact that 3DFusion cards are not compatible with the K9N Neo or nforce 550 and if so... presumably I need either an NVIDIA geforce or an MSI geforce rather than my 3dfusion card ???
So to sum up guys... shall I sell the 3dfusion geforce 6200LE and buy an MSI Geforce.... and if so... which card will DEFINITELY work with the nForce 550 / K9N Neo ???
It seems 3dfusion cards arent compatible with nforce550 or k9n.
do you have the VGA in the BIOS set to PCIE? I just set up my new comp with a 550 chipset and an ATI card and I'm pretty sure I changed the VGA setting in the BIOS

K9N Neo Front Panel Audio

Hi all -
I have a K9N Neo (MS-7260 v2.0) that I am trying to wire in the front panel audio from my case. I'm having some major problems trying to figure out how to match up my case wires with those on the MSI board. I'm hoping that one of you experts will have the answer.
My case has the following signals for a microphone and headphone connection:
MIC GND
MIC PWR
MIC IN
HPOUT R
HPOUT -R
HPOUT L
HPOUT -L
HPOUT GND
In other words, the mic has power, ground, signal; and the headphone has two wires for each channel (+/-) and a common ground.
Now, here is the listed pinout from the manual for JAUD1. I could only find the manual for a PCB v1.0, so if that is the issue then please help me find the right manual:
PIN SIGNAL DESCRIPTION
1 PORT 1L : Analog Port 1 - Left channel
2 GND : Ground
3 PORT 1R : Analog Port 1 - Right channel
4 PRESENCE# : Active low signal - signals BIOS that a High Definition Audio dongle is connected to the analog header. PRESENCE# = 0 when a High Definition Audio dongle is connected.
5 PORT 2R : Analog Port 2 - Right channel
6 SENSE1_RETIRN : Jack detection return from front panel JACK1
7 SENSE_SEND : Jack detection sense line from the High Definition Audio CODEC jack detection resistor network
8 KEY : Connector Key
9 PORT 2L : Analog Port 2 - Left channel
10 SENSE2_RETIRN : Jack detection return from front panel JACK2
It doesn't seem like there are enough signals to hook up a +/- for both L/R on the headphones. And where do I put the mic??
Thanks in advance for ANY insights!
Dave

Hello!
I dare not answer your question yet, but I know that many with this kind of question have been helped by contacting the case manufacturer's support some way.
Sure it is not life or death for your problem, but Moderators here are under death penalty not to help people who don't describe their complete system. Motherboard we know. Processor, memory, hard disks, PSU and it's max. amperes and a few other things remain unknown.

I use a bluetooth headset with iPhone 5 but when I ask Siri to read my email she says I must unlock my phone first. If I take the phone out of my pocket I might as well just read the email then. Is there a way to fix this?

I use a bluetooth headset with iPhone 5 but when I ask Siri to read my email she says I must unlock my phone first. If I take the phone out of my pocket I might as well just read the email from the phone screen. Is there a way to fix this so the phone doesn't have to be unlocked?

Apple, as I'm sure you know, now manage official phone 'unlocks' directly rather than the Newtork doing so.
When a GSM Network Provider buys a consignment of iPhone's they are locked to that carrier and may only be officially unlocked if said carrier requests it. If so, it is Apple who do this, via iTunes.
I am therefore inclined to think that part of the any generic iTunes syncing process involves the transmission of key hardware data, including IMEI, to Apple whenever the handset is synced.
If this is the case and, as each iTunes account is linked to a credit card, were Apple to maintain a database of genuinely stolen phones (ones reported to Police) they could advise said Police force when a stolen phone stuck its metaphorical head over the parapets once again? They would be able to identify the name & address of the new user.
I have spoken to the Police here in Ireland today and they regularly engage with Apple on such matters.
This may not be tracking as we know it Jim, (not using GSM Triangulation or GPS) but it's arguably even more targetted and leaves an indelible fingerprint of guilt on the thief.
The laws here are simple in this regard, if you are in possession of stolen property, knowlingly or otherwise, you forfeit the goods once the Police show up. Whether you get prosecuted depends on whether you stole the goods or were duped into purchasing them.

When i want to ask the guaranty status of my apple wireless keyboard, i got an error: apple keyboard We're sorry, but this serial number is not valid. Please check your information and try again.

When i want to ask the guaranty status of my apple wireless keyboard, i got an error: apple keyboard We're sorry, but this serial number is not valid. Please check your information and try again.

If you purchased the iPhone from Apple or an authorized Apple reseller,
contact them for assistance. If you purchased elsewhere, go back
to that retailer and get them to give you a new iPhone or your money
back.
If you have checked the serial number carefully and re-entered it
and that gave you the same error message, contact Apple if purchased
from Apple or authorized retailer; otherwise you have been scammed
and need to pursue the matter with the business you obtained the
iPhone from.

UPortal Error Sorry, but uPortal encountered an error that is preventing it from rendering. The error must be corrected by system administrators. Try again later.

I get this error code when trying to sign into my college web site.
I had a friend sign into hers from her computer and she did not have an issue.
uPortal Error
Sorry, but uPortal encountered an error that is preventing it from rendering. The error must be corrected by system administrators. Try again later.

I get this error code when trying to sign into my college web site.
I had a friend sign into hers from her computer and she did not have an issue.
uPortal Error
Sorry, but uPortal encountered an error that is preventing it from rendering. The error must be corrected by system administrators. Try again later.

K9N NEO V3 POST Beep Issue

Hello, and thanks in advance for taking the time to give this a look. (TL;DR below)
As stated in the topic title, I’ve been having issues with my PC involving POST beep codes.
Couple days ago, PC stopped displaying on monitor. A few on/off’s later, I realized the PC was beeping oddly. I looked up POST codes online, but I’m not entirely sure which set to use. I have no display to check for my motherboard BIOS and version, so I am at the moment using what is written on the actual mobo; AMI BIOS. I can hear a single beep, followed by about 8 shorter beeps. There is a noticeable difference between the first and the rest. I have already run the computer without the optical drive, harddrive, and graphics card and still found the same problem. With just the mobo and CPU, I hear nothing, but that’s because I assume my mobo will not POST without RAM, so I tried a single stick new replacement to test with and I am still getting the same POST beeps as before. I have also tried reseating my graphics card and the small round cell found on my mobo. Is there anything that I’ve missed? Or is there something else at the root of the problem.
TL;DR: My computer will not display on a monitor, and I am getting the beeps associated with POST problems. Have tried running without essential hardware and separate memory stick to no success. Unsure of how to proceed.
Here are my current specs:
MSI K9N NEO V3 / MS-7369
AMD Athlon 64 X2 5200+ Windsor @ 2.6 GHz
OCZ Gold XTC Dual Channel PC26400 DDR2 800MHz 1GB x2 (5-5-5-12)
XFX 8600 GT XXX Edition 256 MB DDR3 PCI-E
WD Caviar Blue 160GB 7200RPM 8MB SATA (WD1600AAJS)
Apevia X-Infinity Case with Turbolink PSU (420W)
Windows XP (32bit) SP3
I’ve narrowed down my problem to either the mobo or the cpu, but that’s about it.
I appreciate your help, and if there’s something that needs to be clarified, just let me know.
I apologize if this is in the wrong section or if there’s a format problem with my post.

I figure this is the best place to ask, since its related to my issues and doesn't need another topic.
I'm looking at this Corsair 750W PSU, but the only thing I'm wondering about is lack of a P4 MB connector. I'm not entirely sure what it's used for? I'm pretty green when it comes to installing and hooking up PSUs, so I've been comparing the connectors just to make sure I don't buy a product that won't hook up to my system. Also, is there a default size? Like motherboards come with the ATX or micro-ATX form. I'd hate to buy it and find out that it won't fit in my case
First choice
Second choice
Third choice
I noticed a lot of the PSU have multiple 18A / 12 V rails as opposed to a single 12V rail with higher amps. Are those maximum values? Or will it increase as you decrease the number of 12V rails being used. Sorry for the questions, but I figure I might as well ask now while I can

No video on new build K9N NEO V3

Hello all,
New build turns on, no beeps and of course no video. Stays running when is turned on just no video. All fans working (CPU, case, power, and video fans). Have tried detaching the mother board and tested with two video cards (one video card per test) and one stick of memory. Used a CRT monitor and a LCD monitor.
Here are the numbers:
msi k9n neo v3
amd athlon 64 x2 5000+ black edition
chaintech geforce 7300gt (tried other pci video card, pulled from working system)
crucial 2-1GB 6400
power supply:
dc output: 3.3v / 5v 12v--12v 5v / -12v / 5vsb
max output current: 12a / 46a 26a--26a .5a / .8a / 3.0a
32a
max combined: 230w 384w 25w
Let me know if more info is needed. Thanks for any help.

Quote from: Fredrik Åsenius on 21-March-08, 07:44:50
Don't know if it is that, but BIOS supports the 5000 BE from v. 2.3. Perhaps you can get help in making sure what BIOS version you got.
It does sound like Bas says processor related. Cause all required power cables are in place, right?
Why the rush in RMA-ing? You must be pretty good at computers to be able to say definitely when it is RMA time, and what to RMA... Or think you are pretty good.
I do computer support for a living but I will be the first to tell you that I don't know everything. I just don't know what else it could be and I guess I'm anxious to get my new rig up and running!! BF2 awaits me . . . It's comforting to hear someone with the same issue so that I don't feel like I'm going crazy here.

Mainboard issue. (K9N Neo)

Hi everyone.
Problem is that my PC completely freeze (After 1 sec in Bootscreen or even BIOS) or after 1 hour. I then have to press on\off button. Sometimes I have to do it many times to even boot. In log it says:
IRQARB: ACPI BIOS does not contain an IRQ for the device in PCI slot 11, function 0.
IRQARB: ACPI BIOS does not contain an IRQ for the device in PCI slot 12, function 0.
IRQARB: ACPI BIOS does not contain an IRQ for the device in PCI slot 13, function 0.
IRQARB: ACPI BIOS does not contain an IRQ for the device in PCI slot 14, function 0.
IRQARB: ACPI BIOS does not contain an IRQ for the device in PCI slot 15, function 0.
I have a MSI K9N Neo Mainboard. PS: Where is the BIOS update for my K9N? In the MB page I only see the LiveUpdate thing, and my Windows is not stable so I wont update from there.... The direct file anyone?
I've tried to reformate and reinstall, but no help. It's HW related. Any ideas?

Quote from: Frode789 on 09-June-07, 20:03:45
PSU:
NorthQ 4775-400BULK, ATX 400W, 120mm
, 12-17dBA, 2xSATA, PCI-E, 20/24pin
All temps are good. Nothing is overheating. (As far as I can see)
The Windows MemTest did not find any errors. I've also tried to change brand\sticks\slots. Nothing helps. I've also tried to UN-plug the CD-ROM and tried to change Harddrive. Also the graphic-card. Must be my MSI card... Any other ideas? What does the error message say to you? It's crappy... In the end I will give two choices:
- Dump the MSI card in the trash
- Try to update the BIOS
Even if I fail I don't care, because it's (For me) already broken. I can't use my PC anyway.
"NorthQ 4775-400BULK, ATX 400W, 120mm
, 12-17dBA, 2xSATA, PCI-E, 20/24pin "
amperes please..(look over PSU sticker)
example:
+3.3V -35A
+5V -35A
+12V -33A
"The Windows MemTest did not find any errors."
use those memtest ---> http://www.memtest.org

MSI K9N Neo (AM2) memory troubles

Hi guys, I just got a new system which is having some issues, and I'd appreciate any suggestions on what could be wrong.
At first, the system simply crashed during OS boot. A quick test with memtest86 showed 50-60 thousand errors on a single run, so I asked at Corsairs site, got the recommendation to up the voltage to 2.1V. The memory got a whole lot more stable, but still showed a few dozen errors per run.
So, I proceeded to test the modules one by one, and found them operating well as long as only a single module was inserted (no errors on a 12+ hours run). I moved them around, tried different dimm slots, but as soon as both modules were in, there were errors ranging from a few to several dozen per memtest pass.
The system specs are:
MSI K9N Neo (nforce 550 based)
AMD Athlon64 3500+
Corsair Value Select 2048MB PC5300 kit (2 1GB dimms, 667 MHz)
Geforce 6600 video card.
BIOS settings are defaults (memory timing set from SPD) with memory voltage increased to 2.1 volt as per Corsairs suggestion.
Any suggestions? Is the MB shot, should I get it exchanged, or could there be some other problem?

Hi Raider,
I would not run in dual channel mode until you get at least one stick to run w/o errors in Memtest86. I had a similar problem with different memory but the same MSI K9N MoBo. Sometimes it passed and sometimes it did not. My two problems were (1) power supply, only 350W, so I jumped up to a 500W, and (2) memory timings. The MSI site said the MoBo has trouble with SPD timings. So try moving the mem speed down a whole bunch, like 166Mhz or 133Mhz clocking first. If it passes all mem tests, then move the clock back up and try to look up the memory timings for your memory and type them in manually in your BIOS. For me, I went from 2.5-3-3-8 2T to 3.0 5-5-8 2T and it ran forever. From Windows I used CPU-z to see the memory SPD and timings and set it to the lower settings from CPU-z to make it work the first time. This week I am taking back the memory to the store because it won't run at spec.
Good Luck
Dave T

K9n neo 1.0 problems with compatibility of memory?

i have a k9n neo 1.0 with bios version 1.3 and linux ubuntu Linux ubux2 2.6.20-16-generic #2 SMP Tue Feb 12 05:41:34 UTC 2008 i686 GNU/Linux
cpu AMD Athlon(tm) 64 X2 Dual Core Processor 4400+
2 gb of ram KVR667D2N5K2/2G 2GB 667MHz DDR2 Non-ECC CL5 DIMM (Kit of 2) (installed in dimm1 and dimm2
hard disk sata western digital WDC WD3200JS-00P
ide DVD reader HL-DT-ST RW/DVD GCC-4522B
video pcie G70 [GeForce 7300 GT]
with that configuration works smooth (the only detail with that configuration is a message in the startup from bios about the cpuid )
My problem began when i try to add 2gb to the motherboard, i search a list of compatible memory and... i choose 2 of KVR667D2N5/1G 1GB 667MHz DDR2 Non-ECC CL5 DIMM, and i try of put them in dimm2 and dimm3, results? some times can't boot my hard disk give errors, some times i can startup but when i start to launch programs i get disk errors, and just stop of respond, i need reboot.
1. i run memtest86 and don't report any error.
2. i take off the 2 gb KVR667D2N5/1G and all is fine again.
3. i put the original 2gb KVR667D2N5K2/2G but now in dimms3 and dimm4, and... seem works fine for a minutes, but same problem in some moment sda stop to respond and reboot again.
4. i remove the original memory and put 2gb KVR667D2N5/1G in dimm1 and dimm2, same results
5. i back to the original configuration, just 2gb KVR667D2N5K2/2G in dimm1 and dimm2 and i working without problems.
* note in every step i reset to the optimal values.
first i was thinking that my motherboard have sockets dimm3 and dimm4 damaged, but after of all that i don't know
any suggestion?
Thank's in advance

i am not an expert on your motherboard but to be honest first you must download the manual for your motherboard and go through it thoroughly and then look at the memory selection and type and make sure you have the right one in the right slot. you can also go to crucial memory and test your current memory with their software. although in the bios section i wonder if you have got your setting correct. if not sure just try enable those which are currently disabled and see the difference.sometimes you just have to try and error method as the manual is very basic and gives very little information. good luck

MSI K9N Neo - MS7260

Well, I modified a BIOS again, for the MSI K9N Neo (PCB 1.0), MS-7260. The added features are:
- Damn Nice Bootscreen (the old one suck)
- Processor Frequency Multiplier
- Processor Voltage
I don't know if this will help some people with overclocking, but, here they are.
*USE AT OWN RISK*
http://rapidshare.com/files/228438450/MSI_K9N_Neo__PCB_1.0_.zip.html

hmm, unfortunately I can't seem to find that BIOS on my PC... I must have deleted it or something, but I did find a Beta BIOS in MSI's ftp site, which has EXACTLY the same changes. You can change the CPU Voltage & Change the Multiplier. You can download the BIOS here: http://www.mediafire.com/?o4t5mhomyzi
If you are interested in changing the bootscreen or modify some options, you can download AMI modding tools (MMTOOL v3.22 & AMIBCP v3.37) here: http://www.mediafire.com/?mnqwj2mmww2
I hope this helps. BTW, you should notice that this BIOS is for MS-7260 (MSI K9N Neo, PCB 1.0) only. It has nVIDIA chisets, so the CPU voltage will not be of much help, since nVIDIA uses completely different designs from that of Intel & AMD - nVIDIA's chipsets cannot overclock well, but they do have better latencies. Unfortunately real life performance depends on the actual clock rating & not the latency. You can try this BIOS, but I can't promise that it'll provide better overclocking. If you find that you can only overclock by 5%, then it's definitly better to leave the CPU on stock speed, setting the PLL's frequency higher than nVIDIA's chipset's locked frequency will make it unstable. Test the stability with IntelBurnTest (for AMD & Intel CPU's): http://downloads.guru3d.com/IntelBurnTest-v1.6-download-2047.html
*USE AT OWN RISK*

Sorry but i must ask abaut K9N Neo, MS-7260 VER:2.0

Similar Messages

Maybe you are looking for