Sorry, Messed up my question in previous posting.Triggering one waveform and contoniously generating the other
Hi,
I am using a PCI6014 DAQ board with LAbview.I have to generate two square waveforms at my analogoutput channels. The first wave form has to be contionously generated. The second wave form has to be started on every event occurence and wait till the waveform is complete(AOWait).
Thanks.
Hello,
If you want to generate two square waveforms, I recommend that you use the counter outputs of your PCI-6014 board. You can set up one counter to do continuous pulse train generation and setup the second counter to do triggered pulse train generation.
Do you need the signals to have different specs than 0 to 5V? The counter outputs use TTL logic level signals, so if your square wave amplitude needs to be something other than TTL, you will need to use the Analog Outputs. It is also good to know that the analog outputs share the same update clock, so getting the data to output on the AO that is started from the occurrence may be tricky. I recommend using the counter outputs if at all possible. Check the example programs that ship with LabVIEW. Foll
ow this path to find the counter example programs: Help >> Find Examples >> Hardware Input and Output >> DAQ >> Counters >> DAQ-STC.
Reply to this post if you are certain you cannot use the counter outputs.
Regards,
Bill B
Applications Engineer
National Instruments
Similar Messages
-
Question: When I want to send SMS and click on the contact, the contact came out with names and numbers, as if the whole contacts are there in the phone. However, when I open the contact, I can only see 3 contact names and the rest of 4000 plus contacts are not listed, and it makes you difficult to call through contact
The iPhone remembers information about previous contacts.
Complelely independently, you have a Contacts app with a contacts list. It sounds like your contacts list has 3 names on it. You need to add a few names. -
i think things would have been better without this icloud mess......
someone help me like it again.
1). i have more than 1 account set up with icloud. so i deleted 1 account from the settings on my iphone to try and switch to the other account and everything became a huge mess. (on my iphone i LOST some of my contacts, all of my reminders are gone, and nothing is showing up on the ical on my iphone, and only some notes are showing).......
2). everything is still shown on my macbook pro.... but when i tired to go and sync it..... nothing is transfering to my phone........
3). when i log into the 2 icloud accounts i have with icloud(.com) nothing is showing up in there also......
whats is going on..... this is a huge mess for me. i want to go back the way is was like 1-2 years ago. when you can just sync things from the computer to the phone and not have to go through icloud....... ive been struggling with icloud but today just me hate it to the max.
ANY HELP ON HOW I CAN FIX ALL OF THIS.....
THANK YOU VERY MUCH!the version im using is 10.7.5
im not sure what you mean by you second statement. when i open those application on my macbook its on my macbook but when i sign into icloud. i have those option selected.
maybe my problem is im using the wrong ID...... lol.
is there away you can delete or change icloud accounts/ ID's??? -
When I am syncing one albumn and then another the previous synced photos gets deleted why is it so?
That is how it works. Synced photos can't deleted directly on the iPad, instead that are deleted by not including them in the next photo sync - so you need to select and sync all the photos that you want to remain on the iPad on each photo sync
-
PSD files will not print from Photoshop CS4 (previously posted in Acrobat printing and prepress)
My questions are: Does the PSD file have the printer information encoded?
Also why has this just started to show up? My wife has work successfully under the same conditions, files moved and printed on different printers, with no problems in the past.
I (we) have been struggling with a recent problem trying to print PSD files from Photoshop CS4. (Vista 32 bit, Epson 3880 networked) When trying to print certain, but not all, PSD files I get the message: "Before you can perform printer-related tasks such as page setup or printing a document, you need to install a printer." I have been in contact with Adobe support about the issue but with little in the way of positive results. I was referred to a kb link: http://kb2.adobe.com/cps/409/kb409119.html Tried all that to no avail. (The first suggestion is absurd to the point of making me wonder what process is used to construct the kbs. You cannot open the print menu when you get this message so....?)
Other solutions are not acceptable for the work my wife is doing, editing high quality photographs for an exhibition with test prints and so on. We are under intense time pressue with four shows coming up in a very short time. The final solution offered is that CS5 has solved all of this. Hum? interesting. No comment except new program, new problems so not a real solution for us.
In searching the web about this problem I have come across many other people with the same problem working from different platforms and even different Adobe products. I noticed that the MAC OS seemed to cause the same problem and that there was a problem with Reader and Acrobat. In every case the problem is never solved by Adobe or anyone else and users find some "workaround". I too have found what we hope is a workaround in our contiued travels on the blogosphere, on flickr http://www.flickr.com/groups/wellington/discuss/72157621548183001/ as "...a nasty, nasty solution" but we skipped the flatten part and the GIMP part and resave the PSD under a different name.
Adobe does seem supportive but not that interested (CS4 right) but I would like to find a real solution and I think many people would benefit from it.
Anyway what I have found is that the PSD files that will not print have been printed on another printer at some time in the past. In my case the Printer was an Epson Artisan A50. The printer we are using now is the Epson Stylus Pro 3880. Even when trying to print wirelessly to the 3880 from the laptop (Was Vista, now Windows 7) that was used to edit and print with the A50, (USB connection) we saw the same error. So it seems that the printer information is somehow embedded in the PSD file (also mentioned in a Blog) and is keeping PS from seeing the printer because the same printer is not there.
Has anybody already found the fix?
I know this is a long post but I have been working on this problem and have heard all of the pat and frankly useless answers and workarounds. Can we find a solution and fix the problem?Just a few examples, since you ask:
Dr Craig wrote:
…The first suggestion is absurd to the point of making me wonder what process is used to construct the kbs…
…Other solutions are not acceptable…
…The final solution offered is that CS5 has solved all of this. Hum? interesting. No comment except new program, new problems so not a real solution for us…
…In every case the problem is never solved by Adobe or anyone else and users find some "workaround"…
"...a nasty, nasty solution"…
…Adobe does seem supportive but not that interested (CS4 right)… b
…I have been working on this problem and have heard all of the pat and frankly useless answers and workarounds…
That attitude, Dr. Craig. Plus the verbosity you unconscionably inflicted on your fellow forum users.
Cheers.
Wo Tai Lao Le
我太老了 (Not posting as a scientist here
but as a Photoshop user
so I'll forego listing any unrelated academic titles.) -
What sort of information is needed now?
Which website are you referring to?
Is it Apple's, a bank, or ?
If it keeps being rejected, you may have to contact the website. It might have been something as simple as a typo when you first entered that information. I'd try the "forgot my password" link and try to reset that - once you've able to do that, you should be able to go to your account settings and check/change the security questions/answers. -
i can not figure it out
The Three Best Alternatives for Security Questions and Rescue Mail
1. Use Apple's Express Lane.
Go to https://expresslane.apple.com ; click 'See all products and services' at the
bottom of the page. In the next page click 'More Products and Services, then
'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
ID security questions' and click 'Continue'. Please be patient waiting for the return
phone call. It will come in time depending on how heavily the servers are being hit.
2. Call Apple Support in your country: Customer Service: Contacting Apple for support or
Apple ID- Contacting Apple for help with Apple ID account security. Ask to speak to
Account Security.
3. Rescue email address and how to reset Apple ID security questions.
How to Manage your Apple ID: Manage My Apple ID -
Hi. I'm trying to play back previously purchased tracks from iTunes, but keep getting the message "Your computer is not authorized for playback."
Suggestions?Click here and follow the instructions.
(79859) -
Follow up question to previous post
I'm really confused...
I just posted a message in which I said all TV shows aren't playing back on ATV. Well I found one show that is. These episodes are the only ones that I purchased via iTunes on my Mac and I assume they have been synched to ATV - as I can see them in ATV menu and I can actually watch them - as I should be able to. BUT, as I posted in my previous message, any other episodes which I purchased directly via ATV give an error - "The selected video could not be played".
Another thing I have noticed,,, is if I close by PowerBook, I immediately get an error message: There are not TV shows on your ATV.
I never used to get that,,, and as I have bought so many shows via the ATV,, this is surprising to me. I thought they were stored on the ATV itself?
I find all of this very confusing. I'm a big fan of Apple from way-way-way back, but this ATV is not quite baked yet,, or I'm getting too old.
Anyway,,, it seems my recent attempt to save space on my PowerBook by deleting show shows (but I did copy the files via finder to a external drive) - seems to have messed things up?
Can anyone help me sort things out again?
Message was edited by: Nick SzaszI'm afraid I'm a bit confused too. Some of this post seems to contradict the last.
First thing is first, if when you close your macbook the content is no longer available then it isn't synced. This could be because syncing has been turned off or because of how you have moved content to the HD.
Check your sync options (click on the tv in the device list) how many tabs do you have. -
Folder with question mark - Previous posts not resolving my issue
Good evening everyone
I have a Macbook Pro, which I bought in 2009.
I have never had any problems, and I have been regularly deleting rubbish to keep the memory ok (Pictures, downloads, old text docs etc)
I went online yesterday afternoon, to check out some information - It was fine. I closed the lid, and returned last night to use it.
When I opened it up, there was a white screen with a grey folder with a question mark flashing. As there was no cursor or response from the keyboard, I kept my finger on the power off button so it shut down.
I turned it back on to see the same screen.
I then went online via my iphone to search the meaning behind this error, and read several different troubleshooting feeds. I understand the error is because my macbook cannot find the files it needs to start up, or the hard drive has failed.
I followed the different options to the letter and each have been unsuccessful, my problem is, I have found no advice for when these instructions fail to work.
I have tried:
Holding the 'c' button when hearing the chimes
Holding both shift buttons upon starting up
Holding down CMD, ALT, P,R upon start up
And I have also inserted my install disc.
All of these end in the same result - The apple logo appears on the screen, and then after a while, the loading circle appears - It then stays like this and does not give me the option to safe boot, or choose a language, or select disc utility.
Also, I can not eject my install disk.
Please can somebody help me with what I can do, or perhaps what the next step is?
Thanks very much,
LeahHello Leah.....
That usually indicates that your Hard Drive is either failing or has failed.
Best solution is to take it to the Apple Store and have them check it out for you to see if that indeed is the problem.
As to eject your disk, power up your mb while holding the eject button or right click your trackpad until the cd ejects.
Good luck.... -
UPDATE SUDDELY FAIL( prev question get lock, post new one)
I compile my class localy, and upload them to servlet, How can I display the error messsage? when The update failed, How cant the update will work for a while, then failed, if my table have 10 records, I testing update on row one, an hour, then row one update failes, but rest of row still work fine!!!
MY Update code,
<<<<<<<<<<<<<<<<
String Sql2=" update STUDENT_RECODER set CLass_code =?, PHD_TYPE=?, PART_TIME=?,"
+ " RELATIVE_Name=?, RELATIVE_NAME =? , RELATIVE_DEPT=?, RELATIONSHIP=?, RECOMMENDATION=?, REASON=?,"
+ " EXAMINATION=?, ACADEMIC=?,RESEARCH=?,"
+ " EXAMINER_NAME1=?, EXAMINER_DEPT1=?, EXAMINER_NAME2=?, EXAMINER_DEPT2=? ,"
+ " INTERVIEW=?, INTERVIEW_TYPE=?, INTERVIEW_DATE=to_date(NVL(?,'1900/01/01'), 'yyyy/mm/dd'),"
+ " FIELD_IND=?, FIELD=?, RECOMMEND_CANDIDATURE=?, RECOMMEND_DATE=to_date(?,'yyyy/mm/dd'),"
+ " MANAGER_NAME1=?, MANAGER_EXPERIENCE1=?,MANAGER_DEPT1=?,MANAGER_POST1=?, MANAGER_STAFF_NUM1=?,MANAGER_EMAIL1=?,"
+ " MANAGER_NAME2=?, MANAGER_EXPERIENCE2=?, MANAGER_DEPT2=?, MANAGER_POST2=?,MANAGER_STAFF_NUM2=?, MANAGER_EMAIL2=?,"
+ " STUDENTSHIP=?, STUDENTSHIP_TYPE=?, STUDENTSHIP_LEVEL=?,"
+ " STUDENTSHIP_START_DATE=to_date(NVL(?,'1900/01/01'), 'yyyy/mm/dd'), STUDENTSHIP_END_DATE=to_date(NVL(?,'1900/01/01'), 'yyyy/mm/dd'),"
+ " OTHERREASON=?, SAVING_DATE=? , NOTACCEPT=?, ACCEPT_CONDITIONAL=?, STAFFNAME=?,"
+ " MANAGER_NAME3=?, MANAGER_EXPERIENCE3=?, MANAGER_DEPT3=?, MANAGER_POST3=?, MANAGER_STAFF_NUM3=?, MANAGER_EMAIL3=?"
+ " where USERNAME=? and FORM_NUMB=?";
result=library.updateSQL(conn, Sql2, update);_
<<<<<<<<<<<<<<<<<<<<<<fUNCTION
final public int updateSQL(Connection conn, String preparedSQL, String [] preparedValues){
int result=-1;
PreparedStatement pstmt=null;
try{
if (preparedValues!=null){
pstmt = conn.prepareStatement(preparedSQL);
for (int i=0; i<preparedValues.length; i++){
setString(pstmt,i+1,preparedValues);
result = pstmt.executeUpdate();
else {
pstmt = conn.prepareStatement(preparedSQL);
result = pstmt.executeUpdate();
catch (SQLException e){debug.p("String directSQL error"+e+preparedSQL+"***");}
finally{
try{
if (pstmt!=null){
pstmt.close();
pstmt = null;
} catch (SQLException sqle){ }
return result;
Edited by: Hjava on Apr 21, 2012 6:50 AMA.String Sql2=" update STUDENT_RECODER set CLass_code =?, PHD_TYPE=?, PART_TIME=?,"
+ " RELATIVE_Name=?, RELATIVE_NAME =? , RELATIVE_DEPT=?, RELATIONSHIP=?, RECOMMENDATION=?, REASON=?,"
+ " EXAMINATION=?, ACADEMIC=?,RESEARCH=?,"
+ " EXAMINER_NAME1=?, EXAMINER_DEPT1=?, EXAMINER_NAME2=?, EXAMINER_DEPT2=? ,"
+ " INTERVIEW=?, INTERVIEW_TYPE=?, INTERVIEW_DATE=to_date(NVL(?,'1900/01/01'), 'yyyy/mm/dd'),"
+ " FIELD_IND=?, FIELD=?, RECOMMEND_CANDIDATURE=?, RECOMMEND_DATE=to_date(?,'yyyy/mm/dd'),"
+ " MANAGER_NAME1=?, MANAGER_EXPERIENCE1=?,MANAGER_DEPT1=?,MANAGER_POST1=?, MANAGER_STAFF_NUM1=?,MANAGER_EMAIL1=?,"
+ " MANAGER_NAME2=?, MANAGER_EXPERIENCE2=?, MANAGER_DEPT2=?, MANAGER_POST2=?,MANAGER_STAFF_NUM2=?, MANAGER_EMAIL2=?,"
+ " STUDENTSHIP=?, STUDENTSHIP_TYPE=?, STUDENTSHIP_LEVEL=?,"
+ " STUDENTSHIP_START_DATE=to_date(NVL(?,'1900/01/01'), 'yyyy/mm/dd'), STUDENTSHIP_END_DATE=to_date(NVL(?,'1900/01/01'), 'yyyy/mm/dd'),"
+ " OTHERREASON=?, SAVING_DATE=? , NOTACCEPT=?, ACCEPT_CONDITIONAL=?, STAFFNAME=?,"
+ " MANAGER_NAME3=?, MANAGER_EXPERIENCE3=?, MANAGER_DEPT3=?, MANAGER_POST3=?, MANAGER_STAFF_NUM3=?, MANAGER_EMAIL3=?"
+ " where USERNAME=? and FORM_NUMB=?";<<<<<<<<<<<<<<<<<<<<<<<<<
Bresult=library.updateSQL(conn, Sql2, update);<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
Cfinal public int updateSQL(Connection conn, String preparedSQL, String [] preparedValues){
int result=-1;
PreparedStatement pstmt=null;
try{
if (preparedValues!=null){
pstmt = conn.prepareStatement(preparedSQL);
for (int i=0; i<preparedValues.length; i++){
setString(pstmt,i+1,preparedValues);
result = pstmt.executeUpdate();
else {
pstmt = conn.prepareStatement(preparedSQL);
result = pstmt.executeUpdate();
catch (SQLException e){debug.p("String directSQL error"+e+preparedSQL+"***");}
finally{
try{
if (pstmt!=null){
pstmt.close();
pstmt = null;
} catch (SQLException sqle){ }
return result;
}Edited by: Hjava on Apr 21, 2012 5:15 PM
Edited by: Hjava on Apr 21, 2012 5:15 PM
Edited by: Hjava on Apr 21, 2012 5:17 PM
Edited by: Hjava on Apr 21, 2012 5:17 PM -
Tried changing wpa options and having no security but that doesn't work. I have talk talk fibre so connection speed no issues. I have an external HD with back up on but I don't think that has anything on to help me here.
Tried changing wpa options and having no security but that doesn't work. I have talk talk fibre so connection speed no issues. I have an external HD with back up on but I don't think that has anything on to help me here.
-
When I type in the address of a previous tab manually, it brings me back to the other tab.
I went to a website which I need to look more than one thing up on, so I pressed ctrl+t to open a new tab, and started typing in the address. It filled it in for me from my history, I clicked it (to be as specific as possible, I clicked on the website it suggested me with in the drop-down menu from my history, like it does when you start typing in an address/keyword), and it just brought me back to the previous tab instead of loading the website in the new one I opened.
I looked through my settings--both Tab-Mix Plus settings and Firefox settings--to see what could be causing this, if it was something I could enable/disable, but I didn't see anything. This is a really annoying feature and I would like to disable it. I know it doesn't seem like a big deal, but it's a really irritating thing to me... I guess I'm slightly obsessive-compulsive that way.
I know there are ways of getting around it, but, as I said, I find it really irritating and I'm stubborn. If there's a way to disable it I would really like to know.I am not sure if the switch tab feature can be turned off. I did initially find it a minor irritation, but it does have the advantage if tabs scroll off screen that you are made aware of existing matching tabs, so I have come to see it as an improvement.
I have just tried with firefox4 to make sure and I am able to easily open multiple same tabs by for instance using '''Firefoxbutton -> history'''
There is along discussion thread in [http://forums.mozillazine.org/viewtopic.php?f=23&t=1977593&start=45 Mozilazine] about this feature and how it interacts with auto-fill.
You can of course use the (windows) '''right click option''' from links on a webpage to open other related pages in a new tab.
Also from the search bar or the location bar '''Alt + Enter''' will open that address in a new tab. And''' Control and drag''' with mouse on the tab will duplicate it. -
Can't get the little post sheet for twitter and facebook in the notification center
I used to post from my notification bar but now they down open when i click on them, both facebook and twitter post.
Tried logging out and changing the share widget button in setting>notification.
Working on MBP 2012 OS X 10.8.4I am facing the similar issues on my OSX 10.8.4, I have tried to delete and add the FB and twitter account back, but no luck. I also went to activity monitor and quit the notification, still no go. Looks like a bug issue. Any one aware of the fix, pls help. I really do not want to reinstall the OS.
-
GR for production order post to cost center and not to the production order
Hi all,
when we post the goods receipt for the finished product against the production order (mov. type 101), the order is not credited with the corresponding stock value. Instead of this, the value accounts to a cost center.
We specified this cost center in OKB9 (Default account assignment), because if not, we get an error when posting the goods receipt cause of lacking accounting object.
I can't see why the system does not credit the production order?
Any ideas?
Thanks for your time
DanielHi Daniel,
This is the first time i am coming across an issue like this.
neverthless from a logical front,
1. Remove Cost center as a valid receiver in Settlement Profile.
2. Your OKB9 setting are pretty much good. No need to worry about it. Becasue, OKB9 only will work if the system doesn't identify any other cost object. In this case Production Order is an automatic cost object which system should have taken.
3. Check the Settlement rule when you have created Production Order. It should have been MAT.
4. I hope you are creating Production Order with Material (using CO01 and not CO07)
5. Make sure in OPL8, the default rule in controlling tab is PP1.
Once all these are fine, i do not see any reason why you will get your probelm.
Please check and revert back to me if the problem still persists.
Best Regards
Surya
Maybe you are looking for
-
How to schedule a batch job to generate security audit log (SM20)
May be this is a repeat question for this forum. Apologize, if it is. Is there a way to schedule a batch job to generate security audit log (SM20) automatically and possibly send a message to SAP Inbox or generate a spool request? Release is 4.6C. Re
-
I have uninstalled and reinstalled iTunes Version 11.4.1 and still cannot access. I continue to get the Error 7 Windows Error 193 and now I am getting the Apple Mobile Device failed to start. I can't access any of my music I HAVE PURCHASED. What to
-
Where I can find "" JAVASUP.VXD "" PLEASE HELP ME
My computer is asking me for a JAVASUP.VXD file I don't know where I can get that file OR if I can change the setting of my computer to prevent this situation. PLESE let me know THANK YOU
-
My apps keep crashing after the 7.1 update. Help, please?
After the update, I have noticed that my apps keep crashing even after I have updated the said apps. It's getting worse and, frankly, very annoying. How do I resolve this issue? Please help.
-
To download shared content, your family must have a valid payment method
I'm trying to share movies bought on my account with my son and keep receiving the message "to download shared content, your family must have a valid payment method". I already have a credit card linked to my account. Help?