Sorry, only emergency calls are allowed !

I recently bought this curve off someone and when i put in my sim card it just states "Sorry, only emergency calls are allowed ". Is there a way to get this off so i can use it? I have tried to format it by entering the wrong password and tried to erase and wipe out everything but still no answer. Any clues? Please please help!

This problem is usually because the BlackBerry is locked to a specific carrier. Unfortunately, you are probably using a different carrier than the person who sold you the BlackBerry.
If this is a legitimate BlackBerry you have obtained, see if you can get in contact with the seller and get them to unlock the BlackBerry. Often, T-Mobile allows BlackBerries to be unlocked if the subscriber have been with them for some time. So contact the seller, get them to call the original carrier, get the BlackBerry unlock code for you, and send it to you to unlock the unit. You may need to provide the IMEI code. Make sure the seller has properly deactivated his/her BlackBerry service, so that the PIN is not in use.
There are other gray-area options (i.e. "GSM unlocking" services), but I am not sure if RIM wants such discussion on these forums.

Similar Messages

Only emergency calls are allowed

my Droid is up to date in billing, so this is not the issue.
my phone will not let me call anone because it says it is for emergency use only. i do not know how it got changed. i have been using it for a couple of months now and walaah, somewhere a setting is stopping me from using my unlimited plan. please help.

Yes, my phone does have a sim card. I got Verizon to verify that. Yes, I rebooted and everything cleared up. She said if this happens again and the reboot does not work to please call the 1800 number and get technical support. Good luck. Thanks for your help too.

My iphone is disabled and only emergency calls i can call

my iphone is disabled and only emergency calls i can call and apple is telling asking me to connect to itunes but i can do anything about it
on my screen is only emergency call and iphone is disabled

Hi mr persie,
If you are having issues with a disabled iPhone, you may find the following article helpful:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Regards,
- Brenden

License not present. With the trail version only limited replays are allowed... Qtp automation

Hi All.
We are doing QTP automation testing for our flex application. But after running all 30 tests it is showing License not present. with the trail version only limited replays are allowed. We are using flex sdk 3.5 and flash builder 4 plugin for eclipse. we are building our application using ant and we are deploying the application directly and testing it. Can any one tell Steps to resolve this issue...
please step by step required..
Thanks
Ram

You need to have valid premium license for Adobe. Only then it would work.

License not present. With the trial version only limited replays are allowed -- Flex builder 4.5 Premium eclipse plugin with SDK 3.5

Hi ,
We are using Flex SDK 3.5 and using eclipse to build the war in order to make it automation compatible , Right now we tried with Premium version of Flex Builder 4.5 eclipse plugging to build and make application automation capable. But we are facing issues in terms of license , After deploying the automation compatible build we are getting error message "License not present. With the trial version only limited replays are allowed".
Previously we are using Flex Builder 4.0 and everything was working fine .
Is Flex Builder 4.5 doesn't support SDK 3.5 ?
Please help .
Thanks in advance
Thanks and Regards
Sunil Kumar

with trial version (FB basic) you can record/replay only 30
script lines. You need to buy FB pro license to remove this
restriction

CRS-2630: Only cluster administrators are allowed to create local resources

I have installed and configured a 12c database across two linux nodes and all is well. I have also installed the Oracle rdbms 12.1.01 on the same nodes. Now when I try and use netca or dbca to create a database or listener, I get the following errors;
CRS-2630: Only cluster administrators are allowed to create local resources
I can log in as the GRID user and can create resources but not as database user. Both users are members of the dba group.
Any ideas anyone? Thanks a lot H.

The issue is resolved, the 12c configuration is a lot more comprehensive than 11g. Here we have to create the user DBA with the right rights to access and change the cluster resources.
For example to allow the dba users the ability to create listeners on the RAC nodes, we have to issue some command such as follows; here the oedsdp is the dba user and ogridp is the grid main owner.
t@rac2node ~]# /oracle/grid/bin/crsctl setperm resource ora.rac1node.vip -u user:oedsdp:rwx
[root@rac2node ~]# /oracle/grid/bin/crsctl setperm resource ora.net1.network -u user:oedsdp:rwx
[root@rac2node ~]# /oracle/grid/bin/crsctl setperm resource ora.net1.network -u user:oedsdp:rwx
[root@rac2node ~]# /oracle/grid/bin/crsctl setperm resource ora.rac2node.vip -u user:oedsdp:rwx
[root@rac2node ~]# /oracle/grid/bin/crsctl setperm resource ora.net1.network -u user:oedsdp:rwx
Interesting, I think we need to carefully plan the new user groups before we start the GRID configuration.
H.

ExceptionMessage: 'Access denied. Only machine administrators are allowed to create administration service job definitions of type: Microsoft.TeamFoundation.SharePoint.WebAccess.ApplyWebConfigModificationsJobDefinition

Hi,
I am getting error "Access Denied" when my code tries to get "SPWebService.JobDefinition" with an AppPool account of content site. The same core runs correctly for the AppPool of CentralAdmin site.
Lemme provide some background of the servers
- We have multi-server FARM
- WFE and APP servers are in different domains, there is one-way trust between the domains.
- We have UAC (User Access Control) set as high on each server
- My site is internet site
Lines of Code are following
SPWebServiceservice =
SPWebService.ContentService
varsyncTimerJob =
fromSPJobDefinitionjob
inservice.JobDefinitions
                   wherejob.Name
== "MyJob"
selectjob;
I am running the above code with in SPSecurity.RunWithElevatedPrivileges so the above code is running with APP POOL account. I m getting
the error in the 2nd line where I have a LINQ query. And I m assuming this is because of "service.JobDefinition" line. Can anyone help me?
Detailed Error:
An exception has occurred.   ExceptionType: 'TargetInvocationException'   ExceptionMessage: 'Exception has been thrown by the target of an invocation.'   StackTrace: '
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeConstructorInfo.Invoke(BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at Microsoft.SharePoint.Administration.SPAutoSerializingObject.GetInstanceFromType(Type type, String typename)
at Microsoft.SharePoint.Administration.SPPersistedObject.GetInstance(XmlNode xml, Guid classId, Boolean bResolveMissingTypes)
at Microsoft.SharePoint.Administration.SPFileSystemCache.FetchObjectFromFileSystem(Guid id)
at Microsoft.SharePoint.Administration.SPFileSystemCache.GetValue(Guid id)
at Microsoft.SharePoint.Administration.SPCache`2.get_Item(K key)
at Microsoft.SharePoint.Administration.SPConfigurationDatabase.GetObject(Guid id, Boolean checkInMemoryCache, Boolean checkFileSystemCache)
at Microsoft.SharePoint.Administration.SPConfigurationDatabase.GetObject(Guid id)
at Microsoft.SharePoint.Administration.SPConfigurationDatabase.Microsoft.SharePoint.Administration.ISPPersistedStoreProvider.GetObject(Guid id)
at Microsoft.SharePoint.Administration.SPPersistedObjectCollection`1.get_Item(Guid objId)
at Microsoft.SharePoint.Administration.SPPersistedObjectCollection`1.<GetEnumeratorImpl>d__0.MoveNext()
at System.Linq.Enumerable.WhereEnumerableIterator`1.MoveNext()
at System.Linq.Enumerable.Count[TSource](IEnumerable`1 source)
at Project1.SharePoint.Common.UtilityHelper.IsSyncSchedulingDisabled(StringBuilder logMessage)'   Source: 'mscorlib'   TargetSite: 'System.Object InvokeMethod(System.Object, System.Object[], System.Signature, Boolean)'   ------------------------------------------------------------
Inner exception:   ------------------------------------------------------------    ExceptionType: 'SecurityException'    ExceptionMessage: 'Access denied. Only machine administrators are allowed to create administration
service job definitions of type: Microsoft.TeamFoundation.SharePoint.WebAccess.ApplyWebConfigModificationsJobDefinition, Microsoft.TeamFoundation.SharePoint.WebAccess, Version=11.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a.'    StackTrace:
at Microsoft.SharePoint.Administration.SPAdministrationServiceJobDefinition..ctor(String name, SPService service, SPServer server, SPJobLockType lockType)
at Microsoft.TeamFoundation.SharePoint.WebAccess.ApplyWebConfigModificationsJobDefinition..ctor()'    Source: 'Microsoft.SharePoint'    TargetSite: 'Void .ctor(System.String, Microsoft.SharePoint.Administration.SPService, Microsoft.SharePoint.Administration.SPServer,
Microsoft.SharePoint.Administration.SPJobLockType)'
Any help will be appreciated.

The bottom of your stack trace begs to differ:
at Microsoft.TeamFoundation.SharePoint.WebAccess.ApplyWebConfigModificationsJobDefinition..ctor()'
Source: 'Microsoft.SharePoint'    TargetSite: 'Void .ctor(System.String, Microsoft.SharePoint.Administration.SPService, Microsoft.SharePoint.Administration.SPServer, Microsoft.SharePoint.Administration.SPJobLockType)'
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

AUR Submition: only lowercase letters are allowed.

I'm getting this error when trying to submit a src tarball:
Submit
Invalid name: only lowercase letters are allowed.
pkgname() is all lower-case, so I'm not sure why it's complaining....?
Here's the PKGBUILD:
# Maintainer: Phillip Smith <[email protected]>
pkgname=('kernel26-fedora-pae' 'kernel26-fedora-devel-pae')
pkgbase="kernel26-fedora-pae"
pkgver=2.6.31
_FEDORA_RELEASE=40.fc12
pkgrel=1
url="http://www.kernel.org/"
pkgdesc="The Linux Kernel and modules, compiled by Fedora. PAE supported. (Memory >= 4GB)"
arch=('i686' 'x86_64')
license=('GPL2')
depends=('coreutils' 'module-init-tools' 'mkinitcpio>=0.5.15')
makedepends=('rpmextract')
backup=('etc/mkinitcpio.d/kernel26.preset')
provides=("kernel26=$pkgver" "kernel26-fedora-pae=$pkgver")
conflicts=('kernel24' 'kernel24-scsi' 'kernel26-scsi' 'kernel26' 'kernel26-fedora')
# We need to force the upgrade because the previous maintainer
# used the Fedora release number as the pkgrel number so we could
# never have more than one release of each PKGBUILD!
options=(force)
install="kernel26-fedora.install"
source=("http://kojipkgs.fedoraproject.org/packages/kernel/${pkgver}/${_FEDORA_RELEASE}/${CARCH}/kernel-PAE-${pkgver}-${_FEDORA_RELEASE}.${CARCH}.rpm"
"http://kojipkgs.fedoraproject.org/packages/kernel/${pkgver}/${_FEDORA_RELEASE}/${CARCH}/kernel-PAE-devel-${pkgver}-${_FEDORA_RELEASE}.${CARCH}.rpm"
"kernel26-fedora.preset")
md5sums=('cfc0310d8afbfdc42074029a2d6ae565'
'2ade9257df9eaccff5a4ad8fbbbd0c7c'
'c8f559ad29f3bce277ed054d85878c40')
build() {
msg "Nothing to compile for $pkgname"
package_kernel26-fedora-pae() {
cd $pkgdir
rpmextract.sh $srcdir/kernel-PAE-${pkgver}-${_FEDORA_RELEASE}.${CARCH}.rpm
rm -rf $pkgdir/etc/ld.so.conf.d || return 1
rm -rf $pkgdir/usr || return 1
msg "Generating kernel26-fedora.kver..."
_kernver=${pkgver}-${_FEDORA_RELEASE}.${CARCH}.PAE
mkdir -p $pkgdir/etc/mkinitcpio.d/kernel26-fedora.kver <<EOT
cat > $pkgdir/etc/mkinitcpio.d/kernel26-fedora.kver <<EOT
# DO NOT EDIT THIS FILE
ALL_kver='$_kernver'"
EOT
# Install mkinitcpio files
install -D -m644 $srcdir/kernel26-fedora.preset $pkgdir/etc/mkinitcpio.d/kernel26-fedora.preset || return 1
package_kernel26-fedora-devel-pae() {
replaces=('kernel-devel-pae')
cd $pkgdir
rpmextract.sh $srcdir/kernel-PAE-devel-${pkgver}-${_FEDORA_RELEASE}.${CARCH}.rpm
# vim:set ts=2 sw=2 et:

Oh... I thought I had other split packages in there. Obviously not!
And I see there's already a feature request for it... Cool. I'll split the package back into individual PKGBUILD's for now
http://bugs.archlinux.org/index.php?do= … k_id=16394

Only asset postings are allowed in this account

Hi All,
My client upgraded SAP System from 4.6 to 6.0. While testing the depreciation run in AFAB, it is showing the error as "Only asset postings are allowed in this account". We have checked all the settings relating to GL Accounts for Depreciation and Accumulated Depereciation. All are correct, like Depreciation account is a P&L Acccount and Accumulated depreciation account is a Balance sheet Asset reconciliation account. Checked the account assignement in AO90 as well. They are also correct.
The deprecaition was posted up to 2nd period and now we are simulating for 3rd period for which the error is showing, We did not change any configuration setting or the master data.
Is anybody having any idea why such error is showing ? Kindly let us know
Thanks
shankar

Hi,
The user has written a Validation for authorisation to run the depreciation with out proper message. The problem was solved when we run the depreciation with another user. Thanks all .
Regards
shankar

I can't download music from my library to my ipod because it says only 5 accounts are allowed to share content. How do I get around this?

I can't download music from my library to my ipod because it says only 5 accounts are allowed to share content. How do I get around this?

Or how do I change the 5 devices. Some are not used anymore

CR Add-on 2.0.0.7 Problem: Only Super Users are allowed access ...

Hi Everybody,
We have installed the latest ( to my best understanding) version of CR Add-on (2.0.0.7 , compiled for 64 bit , downloaded from Richard Duffy's blog) and we are receiving the error message "Only Super Users are allowed access to this function" .
We've checked that the users are all Super Users and they have Professional and Addon licenses.
The only relevant thread I've found in forums solved the issue by installing the latest version of CR Add-on, which we've did.
The installation is B1 2007 A SP001 ,PL 11.
Any ideas will be highly welcomed.
Thanks in advance,
Simon

We have the same issue, this happens when you go to Administration > Crystal Reports
We can't see the reports in CR
Please if you have a solution tell me.
Thx and Regards,

"iphone is deactivated". Only emergency call alowed only. What do I do?

"iphone is deactivated" it is written on the screen. Only emergency call alowed. What do I do?

It said it would take 2 hours, and my iPhone had a 'connected to itunes' screen. I tried twice but about an 1/8 of the way into restoring it, my iphone made a noise and went back to the disabled screen. Then i thought i'd try it one last time, and on this 3rd time, i ignored it when it went back to the disabled screen from the connected to itunes screen. And it keep saying in itunes that it was still doing an restore update. Only when the 2 hours was over. Nothing happened or came up.

120 DSP used when only 60 calls are made

Hi!
I have a AS5300 which is used to terminate voip traffic. It has 3 E1 ISDN PRI connection to PSTN, and it *seems* it has 120 codecs available. But this router is unable to handle more than 60 calls simultaneously.
This is output from 'show call resource voice stats':
Resource Monitor - Dial-up Resource Statistics Information:
DSP Statistics:
Utilization: 100.00 percent
Total channels: 120
Inuse channels: 120
Disabled channels: 0
Pending channels: 0
Free channels: 0
DS0 Statistics:
Utilization: 0.00 percent
Total channels: 124
Addressable channels: 0
Inuse channels: 0
Disabled channels: 0
Free channels: 0
It shows that 120 DSPs are used, though there are only 60 calls. 'show version' shows '60 DSP(s), 120 Voice resource(s)'. I have another AS5300 with 4 E1 PRI and it handles up to 110 calls.
What's wrong?
P.S. IOS is 12.3(18), VCWare Version: 11.41, DSPWare Version: 4.1.41, Technology: C549.

Hi
Sounds like your gateway is using g729 (compressed codec) - this uses much less bandwidth (8k payload instead of G711's 64K payload) at slightly lower quality...
Do a:
show dial-pee voice | i eer|codec
This should show what codec each peer is set to - the default is G729.
If you are running voice over high bandwidth or a LAN you may want to change this to save on DSPs...
You'll probably need to change the codec on your AS5300 and on the other end of the call leg...
Regards
Aaron
Please rate helpful posts...

Cant Make or receive calls, only emergency calls

All of a sudden without any update, my Porsche Design 9981 stops receiving or making calls, browser also blocked but I can send and receive sms, i can use the blackberry messenger, then when i put the sim in another blackberry phone everything was perfect, i was able to make and receive calls, can anyone assist me in unblocking my phone calls and brower?

When the SIM card became activated have you since rebooted be device ?
Have you you tried a network reset on the device ?
Settings>General>Reset>Reset Network Settings. You will need to put back your wifi passwords after doing this.

Please my old verson iphone is block because yesterday i update but now i cannot open my icone only i can recive call and emergency call so please tell wht should i do for this problem.

before my iphone need to update 41 softweare so yesterday i update but now i cannot open its icone only emergency call only but i can recive call so wht should i do for it.

Are you getting a message about an unsupported SIM? It sounds like you had a phone that had been hacked to work on a network other than the one it was locked to and updating it has re-locked the phone to the original network.
Where exactly did you get the phone? What network are you on? If you did not purchase your phone directly from DU or from Etisalat (assuming you are using a carrier in the UAE) or from a carrier in the country where you purchased the phone or directly from Apple, then you got a gray market phone and it was most likely hacked to unlock it in the first place. Most of these gray market, hacked phones come from the US and were originally locked to AT&T.
Only the carrier the phone is locked to can authorize an unlock. If it is locked to AT&T, they will NOT authorize an unlock.
If any of my assumptions are incorrect, I apologize. We need more information, though to make a recommendation.

Sorry, only emergency calls are allowed !

Similar Messages

Maybe you are looking for