"Sorry, this content is not allowed" Error when trying to post a reply.

Has anyone else seen this error lately when trying to post a reply?
Just to be sure.. I remove all the formatting and just used simple text.. Still the error persists.
It works for some other posts in the same forum too.!
Eg.. I am unable to post a reply to this thread
List the files in a folder
But was able to do so for
control file question
Let me know if any of you have seen this and have a workaround/solution :)
Thanks,
Rajesh.

Rajesh Chamarthi wrote:
I dont think it is an issue with specific words trying to be spam filtered....No content I tried to post i the reply went through.
As I put in the earlier post,just the words "test" didn't work either.
Another post i made had the same words and it went through fine..Hahahaha </sarcasm> ... I was wondering if the issue was to do with the subject, and was jokingly thinking that if the poster had a norty word (eg. l i s t) in the subject, that maybe they'd be allowed to post, but replies wouldn't be able to.
Imagine my surprise when I opened the post you had problems with and found it has... l i s t in the subject. Head, meet desk.
Fail?! *{;-)

Similar Messages

Sorry, this content is not allowed - absolutely puzzled - how to resolve?

Hi all,
I tried to start a new thread today - put a lot of effort into the question - good
English, code (with tags) tested - basically no problems - forum SQL and PL/SQL
There were absolutely no offensive words, nor indeed could what I wrote
be construed as anyway offensive (in fact I positively acknowledged another
poster's contributions).
When I try to post "jive" (more like "hive" - the kind that itches) refuses
to accept my post and I get the message - "Sorry, this content is not allowed"
I tried to edit bits, move bits around, but to no avail.
What can I do to resolve this issue? Is it common?
Any ideas, references, URL's ideas, whatever appreciated.
Paul...

Billy Verreynne wrote:
There is a list of banned words on OTN to counter spam. A bone of contention
that has been raised and discussed numerous times here.
Do not use sales pitch words - like disc0unt. What about b0nus? Or pr1ce?
Do not use words that refers to articles of clothing like sho3s or j3ans.And if one is writing an app for the garm3nt industry?
Is it a frustration? You betcha. I've complained bitterly about it. But the OTN admins seem
convinced that to counter spam, regular posters and valid postings have to feel the pain. :-(V. annoying - it's not like the volume of traffic is huge... I know that I've been told before that
the current version of hive is not going anywhere - but for the (apparently) vapourware
that is the new forum software could have a "rep" status and obviously those who use
obscenities will be "chaparoned" until they mend their ways...
<rant>
It's a bit sad that the world's second largest s/w company can't have a semi-decent
configurable forum system - it also says much about their attitude to the volunteers
who give of their time and effort on these fora - I've had much more help here than
I've ever got off metalink - or whatever they're calling it these days. Furthermore
it strikes me that it would be a good showcase for Apex - another pet rant is that
the sample apex apps that were available are no longer there, despite the web
site saying that they would appear - and that's a good three years now...
Anyway, another cross to bear...
</rant>
On a more positive note, I've criticised Oracle from time to time and have had
cross words with some fellow posters and have never had a post deleted or
a thread that I started locked.
Anyway, keep up the good work on PL/SQL and SQL and Database-General.
Paul...

Sorry, this content is not allowed

Hi Oracle team,
Since two days or so, I noticed that I often get "Sorry, this content is not allowed" when trying to post a reply. It seems that a word filter was added.
Regards,
~ Simon

Hm, I can remember, that in the past a "spambot" has advertisement made for a DVD "C o n v e r t e r"... this could be a reason.

Sorry, this content is not allowed when trying to post.

Hi all,
With text like NVL, tmp when wrapped between <code>....<code> ?
For actual posting, had used { } instead of < > for the above.
Any workaround ?
Regards
Zack

When posting code on the forum, put {noformat}{noformat} (with the curly brackets and the word code in lowercase) above and below your code like this...
{noformat}{noformat}
SELECT *
FROM emp
{noformat}{noformat}
It will then appear like this, preserving formatting...SELECT *
FROM emp
Cheers
Ben

Action list not found error when trying to install Flash 11. I have IE8 and windows 32 bit. What can

action list not found error when trying to install Flash 11. I have IE8 and windows 32 bit. What can I do? Thanks

Hi, Please try to download the installer from the links provided in the following page: http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header
Thanks,
Sunil

Keep getting VncViewer.class not found error when trying to use Windows 7

Greetings,
I have no issue accessing the OVM Manager 2.2 with OEL 5.4 x86_64 with the latest Java release from ULN. But when I use a Windows 7 client ( x86) with the Sun Java 6 Update 18 I get the following error when trying to access the Console of a VM Guest:
Java Plug-in 1.6.0_18
Using JRE version 1.6.0_18-b07 Java HotSpot(TM) Client VM
User home directory = C:\Users\deverej
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
load: class VncViewer.class not found.
java.lang.ClassNotFoundException: VncViewer.class
     at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed:http://141.144.112.202:8888/OVS/faces/app/VncViewer/class.class
     at sun.plugin2.applet.Applet2ClassLoader.getBytes(Unknown Source)
     at sun.plugin2.applet.Applet2ClassLoader.access$000(Unknown Source)
     at sun.plugin2.applet.Applet2ClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 7 more
Exception: java.lang.ClassNotFoundException: VncViewer.class
I am curious fi I should use only a specifc Java Engine with IE 7 or the latest Firefox browers.

Same issue to with Windows XP SP3 x86 with Java Runtime Enviornment 1.5.0_15
J2SE Enviornment 5.0 Update 15
Java 6 Update 17

Error When Trying to POST: Method not implemented in data provider class

Hi Experts,
I have created an Odata Service using Netweaver Gateway Service builder. I am using Advanced Rest Client to test the service. I can successfully GET my data, but I run into issues when I try and POST new data.
When trying to POST, I used the GET method to get the x-csrf-token, and added it to my header. I also updated the body XML with the data that I would like to POST. However, after sending the POST request, I am getting a "500 Internal Service Error" with the xml message "Method '<OdataServiceName>'_CREATE_ENTITY" not implemented in data provider class".
Any help on this would be greatly appreciated. Thanks!

Hi Kelly,
Can you share screenshots of the error? Maybe something wrong with payload :can you share the same also? Did you try to debug it by putting a breakpoint in the CREATE_ENTITY method in the backend? Any luck?
Regards,
JK

Codec Not Found error when trying to render/export layered sequence

I have a sequence that I never had problems with in the past but as of yesterday when I open the project and try to render or export. I get the infamous dialogue box saying, "Codec not found. You may be using a compression type without the corresponding hardware card."
I've narrowed it down to only being a problem wherever I have two particular types of media clips layered one on top of the other. In this case it is occurring wherever I have an Apple ProRes 422 (HQ) clip layered with an Animation codec clip containing a graphical bug that was created in After Effects and exported as a Quicktime Movie with RGB+Alpha. Because of the Alpha channel in the bug clip, it is automatically given the Animation codec upon export from After Effects to retain and preserve the transparency needed. I've also narrowed it down to only occurring when all this is combined on a sequence with its compressor set to standard ProRes 422 or ProRes HQ. If I set it to any other codec, such as any DV/DVC Pro or MPEG IMX codec then I can render and export again.
Also interesting is that I can nest the sequence into another sequence and render and export just fine as well, even with it set to either ProRes codec (which will probably prove to be a suitable workaround for the time being), however, any additional insight into this issue that anyone can provide, pertaining to what may have changed or caused my original sequence to suddenly not want to render anymore would be greatly appreciated.
And if anyone else reading this comes across this this same type of problem themselves, then I suggest what I just got to work: Duplicate your sequence, then delete the clips from the new sequence and nest the original sequence into it.
Here is some additional background info if desired:
I'm using FCP 6.0.6. The sequence I have going here is set to Apple ProRes 422 and consists entirely of Quicktime Movie files. Video Track 1 has the main video clips using the ProRes HQ codec (Again, even with the sequence set to ProRes HQ, it doesn't make any difference here). Track 2 has a graphic bug that was created in After Effects and layered over the Track 1 clips at various places. I was able to work with these clips and render as well as export the sequence with no problems last week. However, I was requested to revise the bug in After Effects, and then replace the old bug with new bug and export the sequence again. So yesterday, I simply opened up the After Effects project file for the bug, made the revisions and exported it with a new name using the same settings as the previous bug. The render problem I'm now facing surfaced right when I opened the FCP project file yesterday, before even importing and replacing the old bug with the new bug. I went ahead and imported the new bug and placed it in place of where the old bug occurred. But the render and problem remained. On this particular problem sequence, I can render the new bug if I actually disable or remove the ProRes clip beneath it, but I cannot in turn render the ProRes clip after disabling/removing the Animation clip above it.
Now, I can copy either type of clip into their own sequence allowing the clips' respective native settings (ProRes HQ & Animation) to take effect and then they will playback and export just fine. I can even copy the bug clip (Animation codec) and paste it into the other clip's ProRes HQ sequence and it will render and export just fine from there as long as it is placed next to the other clip and not layered over it. On these newer sequences, it is only when the bug (Animation) clip is layered over the ProRes HQ clip with the sequence set to ProRes or ProRes HQ do I tend to still get the "Codec not found" error.
I've also tried the following steps to try and troubleshoot to no avail:
1. Copied entire sequence into a new sequence. Problem still occurs.
2. Closed FCP, trashed preferences, and restarted FCP. Problem still not resolved.
3. Opened project on another computer, had same problem.

Thanks for sharing these ideas about dealing with this error message.
For what it's worth, I finally managed to solve a similar issue by going into sequence settings, choosing the Video Processing tab, and changing Render 10-bit YUV to Render 8-bit YUV.
Maybe this helps someone?

HP Device Not Found Error when trying to print or scan wireless- HP Officejet Pro L7590

Have had HP Officejet Pro L7590 All-In-One Printer for years. Always worked fine and I had no issues printing via wireless connection. Several months ago.. Possibly after a Windows 8 update. From Windows 8 to Windows 8.1 I have not been able to use the printers wireless feature. When I try to print or scan it shows the printer as offline. Also get an error message that tells me "HP Imaging device is not found". I can still print when connected to USB. Cannot scan or use features of the HP software suite. I have tried several times to correct. Reloading the software and drivers several times, but no success. I just tried again and was able to print the test page wireless, so got all excited and thought I fixed it. Then tried to print something and got the same error message I have seen in the past. I have talked to certain supports saying that it may be a firewall setting within Windows. Any other suggestions? Thanks

Hi @rfjones002,
Welcome to the HP Support Forums! I see you are not able to print or scan wirelessly to your HP Officejet L7590 and your computer running the Windows 8.1 Operating system. You get a 'Printer offline' or 'HP Imaging device not found' errors.
I would like you to start with the steps listed below:
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
Uninstall the software again - Uninstall the Printer Software Instructions
When the uninstall has completed restart the computer
Follow these steps to reset the registry settings and options for Windows Installer.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type
msiexec /unregister
and then click OK.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type
msiexec /regserver
and then click OK
*Note: there is a space between the c and the /
If you have any difficulty with this step, please use this link to perform it another way. Restarting Windows Installer
Run Disk cleanup from Accessories\ System Tool < How to Delete files using Disk Cleanup
Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayerflashplayer/downloads.html
Perform a clean boot > How to perform a clean boot in Windows
Download the following SP40669 File Download - if this does not download and or install please proceed to the next step.
Turn off the Real-Time Scanning and Firewalls; The image below is a McAfee example, if you have a different antivirus program and need help disabling Real-Time Scanning and Firewalls let me know.
- Image source
Now you can go ahead and download and install the software here >
HP Officejet Pro Full Feature Software and Driver
If you are unable to print a test page, please run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Please let me know if this was successful! I will watch for your reply.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

BB Pearl 8130 "access not allowed!" when trying to download Blackberry App World

Hi, well I am trying to download blackberry app world onto my blackberry pearl 8130 and whenever I try to download it it goes through the language prompts but then goes to a page with "access not allowed" My device software is v4.5, I am currently in Canada, I have the data plan, I can use the internet browser and my carrier is Telus. All help is appreciated, please and thank you!

Hi and Welcome to the Forums!
"Access Not Allowed"? Is that the precise and exact message? If not, please do provide the precise message.
Please check this page to ensure you meet the minimum requirements (including if it is available in your country):
http://na.blackberry.com/eng/services/appworld/download.jsp
If it is available in your country and you feel you meet the device-level system requirements, then contact your carrier to ensure that you meet the service plan (from them) requirements for access (via their network) to AppWorld. Generic data plans, even unlimited, are usually not sufficient...a specific BB data plan is normally required.
Lastly, do be aware that AppWorld is merely a portal, vending apps developed mainly by others. As such, it is not your exclusive procurement source -- there are others that you can try (e.g., Handango, Handmark, BPlay, GetJAR or Mobihand). I have found that there are very few apps that are exclusive to AppWorld. You can search the on-line catalog and then search out other procurement sources, including quite often the developer website itself.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Not-identified error when trying to make a connection in CS4

Hello;
When I try to make a Db connection to mysql in DW CS4,using connections,the +-button and fill in the pop up,I am getting the following message:
"a not-identified error has occurred".
The database name,password and all the other information is ok.So I really do not know what is happening.
Is there someone there who has an answer for this problem??
many thanks for the help!

Igorbuitendijk wrote:
The testing serverfolder is:http://www.checksite.eu:2222/public_htmlThe URL prefix is:http://www.checksite.eu:2222/public_html
When I leave out the 2222,Dreamweaver can't make a connection to the server.
I don't know about the use of port 2222, but your testing server definition is completely wrong.
The testing server folder must be a physical path, not a URL. And the URL prefix must be a valid URL. public_html is the name of the web server's document root, it should never be part of a URL.
Judging from the details you have given here, you are using your remote server for testing. In the Testing server section of the site definition, set Access to FTP. The value of Host directory should be what your hosting company tells you to use when logging in. For some hosting companies, you use public_html on its own. Other companies tell you to leave the value blank or to use just /.
The URL prefix is just the URL for the site.

File not found error when tried to open Document ID settings page

Hi
when i open sitesettings>site collection administratin >Document
ID settings
it shows
file not found error
adil

Hi,
first we need to figure out the error. change the web.config so that you can see the error on browser
1) Obtain the complete call stack instead of the default error page:
<SafeMode MaxControls="200" CallStack="false"/>
to
<SChangeafeMode MaxControls="200" CallStack="true"/>
2) CustomeErrors mode value (in the system.web section) is set to Off:
<customErrors mode="On">
to
<customErrors mode="Off">
Change these value in "c:\inetpub\wssroot" CA dirctory web.config and
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\TEMPLATE\LAYOUTS\web.config .
now again try to do the action. you will get the error on screen.
Whenever you see a reply and if you think is helpful,Vote As Helpful! And whenever you see a reply being an answer to the question of the thread, click Mark As Answer

HELP....why do I keep getting "Not Delivered" errors when trying to send a Group MMS text message?

I am trying to send a Group MMS text. There are 6 recipients. I hit "send" and the progress bar goes almost to the very end, and then hangs up....and eventually I get a "Not Delivered" error message. I click on the "i" icon and it says "your message was not sent. Tap try again to send this message." I've done that time and time again, and the same thing happens. What am I doing wrong?

Try sending it as a regular text message... turn off iMessage.

Field name is not know error when trying to add a filter

Hello all!
I need to add a filter dinamically to display a report. I'm using Crystal Reports 10 w/ RAS server.
There is an sql statement in Database Fields > Command. It uses a join and a correlation name for table name: TT.START_TIME.
I am getting a "Field name is not known" error:
"This field name is not known. Details: errorKind Error in File C:\WINDOWS\TEMP\{D375AB61-F7AE-4BCC-AF5E-6702C0EFDE10}.rpt: Error in formula . '{Command.TT.START_TIME} in DateTime (2007, 08, 01, 09, 00, 00) to DateTime (2007, 08, 24, 04, 45, 00)' This field name is not known. Details: errorKind"
I tried to specify the field the following ways:
Command.START_TIME
TT.START_TIME
START_TIME
TIME_TRACKER.START_TIME (time_tracker being the table name)
MAIN.TIME_TRACKER.START_TIME (main being the schema)
All of the above is giving the same field name not known error.
I am adding the filter the following way:
        String whereClause = "{Command.TT.START_TIME} in DateTime (2007, 08, 01, 09, 00, 00) to DateTime (2007, 08, 24, 04, 45, 00)";
        IFilter filter = rptClientDoc.getDataDefinition().getRecordFilter();
        filter.setFreeEditingText(whereClause);
        rptClientDoc.getDataDefController().getRecordFilterController().modify(filter);
I also tried the following where clause:
String whereClause = "{Command.TT.START_TIME} > DateTime (2006, 08, 01, 09, 00, 00) AND {Command.TT.START_TIME} < DateTime (2007, 08, 24, 04, 45, 00)";
still doing the same thing.
If anyone could please help me w/ this I'd really appreciate it!
Thank you!
Anastasia

The first formula was created using the selection formula expert. I only added the TT part after it didn't work giving the same message. The name the expert gives it after I click on the field is {Command.START_TIME}. Still gives the invalid field name error. -_- Could the rest of the forumula be causing the problem?
In regards to parameterizing the SQL Command, I spoke w/ the gentleman who creates these reports in Crystal, he says it's not possible, because sometimes we don't want a where clause and sometimes we do.
Is there a way to directly edit the SQL string itself which is in the Command through java?
Thank you very much for taking time to respond.
Anastasia

"RAID is not supported" error when trying to install on separate drive

Hi,
I have a Mac Pro (early 2008) with a RAID0 of two 500GB disks as my main drive.
Up until recently I had a separate physical drive for boot camp running XP.
Now, I have replaced that drive with a newer one and wish to install Win7 Ultimate on it, but when trying to run Boot Camp Assistant I get the following message: "RAID is not supported".
Obviously it is referring to my main drive which upon it cannot install nor partition; but I do not intend that anyway - I merely want to install on the separate drive. Is there any way to get past this blockage?
Thanks

One other question comes to mind:
Should the PC drive be formatted using MBR or GUID?
I seem to have some startup issues after installing Win7, and I thought it might be related (the drive is NTFS with a GUID)
Thanks

"Sorry, this content is not allowed" Error when trying to post a reply.

Similar Messages

Maybe you are looking for