Sorry total ignorant and dilettante meldet sich in diesem Forum,
Bin seit längerem der RAW Fotografie zugetan benutze seit ca 1 Jahr Lr 5 auf meinem Mac,obwohl ich auch PS 1 von Adobe besitze,weil ich es im Umgang für wie o.g. Dilettant( Was aus dem lat. kommt,dort aber nicht so negativ beladen ist "dilectare ...erfreuen).
Na ja schon genug Geschwafel.
Ich möchte meine recht umfangreiche Foto Bibliothek auf eine ext.Festplatte auslagern,habe auch nach Scott Kelby's Buch alle Fotos auf die ext . Festplatte gezogen in einen Ordner, den ich Mein Lightroom genannt habe.
Nun schliesse ich meine Kamera bei geöffnetem Lr 5 Programm,so erscheint kein Vorschau Fenster, wie im Buch dieses Herren , sondern wenn ich auf importieren gehe,erkennt Lr 5 die Kamera ,somit ist die Auswahlmöglichkeit,welche Fotos ich importieren will existiert nicht mehr.
Do You have any idea ,to help such an...
Best regards Martin
Es fehlt dennoch genaue Information.
Hast Du die Bilder auf Systemebene im Finder von einer Festplatte auf die andere verschoben oder hast Du sie innerhalb von LR von einem Datenträger auf den anderen verschoben? Letzteres wäre der richtige Weg im Umgang mit LR, weil nur dadurch die Datenbank auch aktualisiert wird.
Ich kenne zwar Scott persönlich, aber sein Buch nicht. Und ich arbeite auch auf dem Mac und meine Bilder sind auf einer externen Festplatte. Alle kein Problem. Wenn Du den Importieren-Dialog anschmeißt, dann kannst Du ja auswählen, wohin die Bilder kopiert oder verschoben werden. Ich selbst beginne immer mit Bridge, die Bilder von der Camera zu laden. Mache grundsätzliche Änderungen im CR und vergebe in Bridge die Keywords, dann importiere ich die Bilder erst in Lr, ich kopiere und verschiebe nicht, erst wenn der Kopiervorgang vollendet ist, lösche ich die Bilder vom alten Platz. Hat damit zu tun, weil mir vor vielen Jahren einmal der Computer beim Import abgeschmiert war, mit der Folge, dass die Bilder, die gerade verschoben wurden, am neuen Platz nicht ankamen, aber am alten Platz gelöscht waren. Wenngleich ich immer Daten wieder herstellen kann, möchte ich solche unglücklichen Abstürze nicht zur Katastrophe verkommen lassen.
Similar Messages
-
I am totally ignorant when it comes to these products and devices. I have a ipod shuffle, 4th generation. I want to find music, without purchasing a song on itunes and then copy it to my shuffle. Is this possible. If so, where do I find the music and how do I get it to my shuffle. I have been trying for 3 hours and about to give up. Please help me.
Yes, of course. iTunes was around before there was an iTunes Store. And I think Apple cares MORE that you purchased an iPod, and LESS about where you get your music to play on the iPod.
You can buy music the "old school" way, on CD, and "rip" them into your iTunes library using iTunes.
You can download/buy music from other sources, as longs as the format is MP3 or AAC, and don't use copy protection (DRM). NOTE: iTunes Store music downloads do not use any DRM.
One example is Amazon.com.
http://www.amazon.com/MP3-Music-Download/b/ref=sa_menu_mp3_str1?ie=UTF8&node=163 856011
They offer a utility called Amazon MP3 Downloader, which automatically places your downloads into your iTunes library.
If the source just provides you with the downloaded song files, all you need to do is open a window showing the files or the folder containing the files. Run iTunes and select Music in the sidebar, under LIBRARY. Then drag the songs files or the folder containing the files from its window to the iTunes window, and drop them there. iTunes will add the songs to your iTunes library.
Once the songs are in your iTunes library, you can automatically sync or manually load them onto your shuffle.
http://www.apple.com/support/ipodshuffle/syncing/ -
my ipad mini is totally drain and after plug it to regain the power its not working anymore.can somebody knows how to make my ipad work again
Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
Totals, Subtotals and ABC Analysis buttons missing from ALV.
Hi,
I have used FM REUSE_ALV_LIST_DISPLAY in my report without specifying a PF-STATUS that means STANDARD PF-STATUS is used in ALV, and moved from Quality to Production, till yesterday all the features such as Sort, Filter, Local file along with Totals, Subtotals and ABC Analysis were visible, today all buttons are visible but TOTALS, SUBTOTALS and ABC ANALYSIS buttons are missing.
I have not done any changes to the Code nor the layout.
Thanks in advance.
Sunil.
Edited by: Sunil Saini on Nov 24, 2010 11:26 AMHi Lalit,
I have checked the Layout.
In Layout in Quality there are checkboxes in Summation/Totals column in front of Numeric fields,
but these checkboxes are not visible in Layout of Production system.
Regards,
Sunil. -
Whenever I insert my verizon air card into my MBA, I get the message "the disc you inserted was not readable by the computer", with the option to either ignore or eject. I select ignore, and am able to connect to the internet, but don't know why this happens. Also, the air card is not showing up as a peripheral on my desk top. Any ideas why this might be happening and how to fix it?
When I unplugged (power) and plugged in again to restart it, yes, I heard it spin and click. Not since then though. I assumed it went to sleep and since the computers don't recognize it they won't wake it.
If I need to replace it can the data on it be recovered? -
my ipod touch screen is totally unresponsive and i have been using it under normal conditions. ihave tried the reset and restore but to no avail.everything works as it would normally do on the screen.help pls????
Might want to post your question in the correct forum. This is the iPHONE forum.
-
Author's note: because I'm not yet allowed to post links in the forums, please note that all links have
dot for the actual . in links, and any "http://" is spaced out so things don't appear as links. Common sense, folks.
I found the answer here: http:// wwwdoteightforumsdotcom/tutorials/13200-windows-8-upgrade-iso-redownload.html,
but here's the brief summary:
-I'm guessing that at some point, you probably downloaded the Windows 8 preview, yes? For whatever reason, when you go to do it "for real," the Windows 8 setup doesn't overwrite the old file, called the "WebSetup"
folder. If that folder is still there, you'll get the "Sorry, something happened and we couldn't finish creating the ISO. Restart setup and try again" message.
The location of the folder is at: C:\%UserProfile%\AppData\Local\Microsoft\WebSetup
where %UserProfile% is the user account you downloaded it under (probably your default account) - this is the folder you need to delete.
Once that folder is deleted, run the Windows 8 setup file (found here: http:// windowsdotmicrosoftdotcom/en-US/windows-8/upgrade-product-key-only if
you haven't, like me, already downloaded it 8 different times thinking it was a corrupted file), and it should prompt you at that point for your product key - which is something it wasn't doing for me. After that, you can choose to make it an ISO, run
it normally, run it from USB, etc.
It'd be helpful if Microsoft knew about this... hope it helps...
(h/t to EightForums, where I originally found and condensed this guide.)Author's note: because I'm not yet allowed to post links in the forums, please note that all links have
dot for the actual . in links, and any "http://" is spaced out so things don't appear as links. Common sense, folks.
I found the answer here: http:// wwwdoteightforumsdotcom/tutorials/13200-windows-8-upgrade-iso-redownload.html,
but here's the brief summary:
-I'm guessing that at some point, you probably downloaded the Windows 8 preview, yes? For whatever reason, when you go to do it "for real," the Windows 8 setup doesn't overwrite the old file, called the "WebSetup"
folder. If that folder is still there, you'll get the "Sorry, something happened and we couldn't finish creating the ISO. Restart setup and try again" message.
The location of the folder is at: C:\%UserProfile%\AppData\Local\Microsoft\WebSetup
where %UserProfile% is the user account you downloaded it under (probably your default account) - this is the folder you need to delete.
Once that folder is deleted, run the Windows 8 setup file (found here: http:// windowsdotmicrosoftdotcom/en-US/windows-8/upgrade-product-key-only if
you haven't, like me, already downloaded it 8 different times thinking it was a corrupted file), and it should prompt you at that point for your product key - which is something it wasn't doing for me. After that, you can choose to make it an ISO, run
it normally, run it from USB, etc.
It'd be helpful if Microsoft knew about this... hope it helps...
(h/t to EightForums, where I originally found and condensed this guide.)
Worked like a charm. Thank you! -
I am using a Seagate backup plus portable drive as my time machine backup on my iMac 7 with OSX 10.9.2 Mavericks. At startup I always get popup window stating "The disk you inserted is not readable by this computer..? I click ignore and everything seems to be OK. Time machine seems to be backuping up to the seagate. I can open time machine and see the history of backups. Why does this message come up at startup of computer????
If you installed the Seagate software, remove it according to the manufacturer's instructions.
-
How to display total "items" and "amount " in header.jsp in CRM ISA B2B
Hi,
I am modifying header.jsp in standard CRM ISA B2B application. Here we have summary of total number of items and total amount but it is coming in to button and for that below code is there in header.jsp and it display it as button text.
if (!ui.homActivated) { %>
!!" alt="" border="0" height="16" width="20">
</td>
<td class="vertical-align-middle" name="miniBasket" value="<isa:translate key="b2b.header.minibasket.default"/>" >
<form name="basketForm" action="javascript:show_basket();">
<input class="green" name="miniBasket" type="button" value="<isa:translate key="b2b.header.minibasket.default"/>"/>
</form>
</td>
<% } else { %>
<!-- HOM scenario - minibasket displays collective order -->
<td class="vertical-align-middle" align="right">
!!" alt="" border="0" height="16" width="20">
</td>
<td class="vertical-align-middle" name="miniBasket" value="<isa:translate key="b2b.header.collorder.default"/>">
<form name="basketForm" action="javascript:show_collective_order();">
<input class="green" name="miniBasket" type="button" value="<isa:translate key="b2b.header.collorder.default"/>"/>
</form>
</td>
<% } %>
Now I want to display total number of items and total amount separately in two different <td> element.
How I can get total number of items and total amount in header.jsp I tried below code but did not get any success.
Insert below line in header.jsp with respective page import statement for class or let me know which class I have to import.
<%
HeaderSalesDocument hdr =
(HeaderSalesDocument) request.getAttribute(MaintainBasketBaseAction.RK_HEADER);
ItemList items =
(ItemList) request.getAttribute(MaintainBasketBaseAction.RK_ITEMS);
%>
And then I use
<td><%= hdr.getNetValue() %></td>
<td><%= items.size() %></td>
But it is not printing any thing and header page not display at all.
Pl. tell me how to get total amount and number of items in header area. Which class or object I have to use here.
I really appreciated any help from any one.
Thanks and regards.
Ashish Patel.Hi, I tried another logic. I took value from Standard button, in which B2B application display total items and amount and I hide this field, to another text element.
Now I Am breaking that value in words and stored them in array and then trying to display that array with particular number which contains total item and amount through Java Script on Focus.
But problem here is, It is not getting updated automatically I have to click on new text files to trigger Onfocus event. How I can achieve effect like as soon as Standard button changes it's value which is now hidden filed my new text box should update automatically.
Thanks.
Ashish -
When iCal in Leopard starts, it is totally empty and unusable
After booting up and starting iCal, it is always totally empty and unusable (none of the buttons work)... There are no calendars, shared calendars, or subscriptions. Quitting and re-opening usually loads as usual and there is no data loss.
This happened the very first time I upgraded to Leopard (I thought everything was permanently lost) and has been happening since.
Anyone know what I can do to fix this?I had the same problems as many others here and may have stumbled upon an answer.
I had no problems after installing Leopard, mine just occurred in the last day.
I deleted the prefs files and it brought my calendars back but when I tried to view my to dos, as soon as the side window opened, it didn't crash the program (i.e. shut it down) but it was useless and I had to quit anway.
Delete prefs, start again.
I had a look at the calendars in there to see if this blank "home" and other folder was there and it wasn't. However I did find that a IMAP email account that I use, connected with another organization, was appearing in my list of calendars. I didn't put it there, but it was feeding info to iCal.
Once I disabled the account in mail, all functionality in iCal was restored.
Hope this helps.
Mj -
What is the total weight and dimentions of a Mac Pro with retina 13" including any extra delivery packaging (i.e box, bubble rap, etc)? Thx
What is the total weight and dimentions of a Mac Pro with retina 13" including any extra delivery packaging (i.e box, bubble rap, etc)? Thx
-
How can I make my Pages doc on my iPad totally private and secure?
<Email Edited by Host>No.
-
I have PS 4,5,and 6 installed on my Macbook Pro as well as Lightroom 4 and 5. Can I remove PS 4 and 5 and LR 4? PS 4 is the total install and PS 5 and 6 are upgrades. LR 4 is the full package with LR an upgrade.
I need space!First let me disabuse of a misconception: All Adobe upgrades are FULL installers. Whether you buy them as upgrades or new versions does not make an iota of difference. The upgrade installers do not need to find a prior version installed, they just prompt you for the old serial number as well as the old one, and they do not rely on the old version in the least.
Second, the time to uninstall an older version is BEFORE upgrading to a newer one. Otherwise, the uninstaller from the older versions will mess up with your new install. There are a gazillion files that are named the same and in the same locations as the new one.
Your best bet now is to uninstall ALL the Photoshop versions you have installed, including the newest one, one by one, then run the Adobe CS Cleaner Tool, then run Repair Permissions from Apple's Desk Utility, and finally re-install the latest version.
The other alternative, if your boot HD is large enough (very doubtful in case of a laptop like a Mac Book), is to leave all versions on it.
Your choice. -
How to show Total amount and distributed amounts in one report
Hi,
I have the Plan Amounts distributed across Fiscal Year Periods for various WBS Elements in the cube.
I have to give a report wherein I should display the Total Plan amount for each of the WBS Element in one column, and the plan amounts across the fiscal year periods in the corresponding columns.
The user enters a Plan Start Date and a Plan End Date as input. The fiscal year periods to be displayed should be between this selection. For example if the user enters Plan Start Date as March07 and Plan End Date as Jun 07, the data should be displayed as follows:
WBS Element Total Plan Mar07 Apr07 May07 Jun07
WBS1 5000 3000 1000 0 1000
WBS2 8000 0 2000 4000 2000
If I take WBS Element in the row, Amount and Fiscal Year Period in the column, I am getting Plan Amounts distributed across the Fiscal Year Periods. I am not able to display the Total Plan amount.
If I take WBS Element in the row, and Amount in the column, I am getting Total Plan Amounts for each WBS but I am not getting amounts distributed across the Fiscal Year Periods.
I have tried by creating restricted key figures for all the fiscal year periods, but this doesn't work as the Fiscal Year Periods to be displayed are dynamic based on the user selection of Plan Start Date and Plan End Date .
Is there any way this can be handled by writing some ABAP code??
Please suggest on what can be done.
Regards,
Srini.Hi,
If i understand your question ,
you want like Total plant amount for range entered , and plan amount for variaous fiscal periods , is that correct...
Y dont u try following ways:
Total plan amount,,,,,,jan,,feb,,mar,,apri...............dec
wbs element..
Now take wbs element in Rows
In columns take plan amount , and double click it so u will reach selection screen.
In this selection... take fiscal period from Time Char and drag it to right side
Restrict the fiscal period with creating Interval variable...
change description to TOTAL PLAN AMOUNT
Now again take Plan amount and bring it in columns..
Double clikc and in selection bring Fiscal period.
Right click it and restrict it to january/ period 1
Change description to January
Copy this January,,,,, 11 times and paste it below
now go in each january and then restrict them with different values....
for one, select february and change description to february
for 2nd select march as restriction and change description to march...
Same way carry out till december.
Save the query...
Click Query in Menu and click properties...
Apply zero row suppression to rows and columns..
This way you will get Total plan amount for total range and for each period in same columns...
With zero row supression if ur user enter only range march to june ,,, all other period values plan amount will get cancel out and u will not see them in display...
Try this workaround and let me know... -
After updating my phone yesterday it worked for about 30 minutes. Now however, it will not let me "Slide To Unlock" the screen is totally unusable and i have alarms that go off every 8 minutes because i am not able to get into my phone to them off. has anyone else had this problem with it being "stuck"?
Basics from the user guide have always been, and still remain, restart, reset, restore from backup, restore as new.
Maybe you are looking for
-
Ipad2 losses cell connection now that iOS 8 was installed. Ios 8.0.2 did NOT correct the issue. Come on and fix this issue!
-
Intermittent clicking when recording guitar - not metronome
I've recently upgraded to Snow Leopard and GB 09. When I record my electric guitar, I'm hearing occasional clicking sounds which are also heard on the recording. Not the metronome. It's off. I've lowered the input gain both in preferences and the
-
Hi Gurus, I have customized billing document out put as follows: 1) i have maintained condition table 002 that is Sales Org/Billing document type. 2) i have maintained condition type with Z and given appropriate name and In the overview i have mainta
-
Autofs timeout while accessing to remote NFS mount
Following Apple recommendations, I switched to "Directory Utility" to configure NFS mounts. As far as I understand, if you do so, the mounts are handled by automount which is itself called by autofs. The good thing of this is that autofs is unmountin
-
Hi Experts, I have a requirement to add additioanal fields to the customer master data as a Navigational attributes and Display attributes.But I don't have a 0Customer object in Cube.I do have a shipto-Party ,Payer (both has reference char asa 0Custo