Sort By Label Doesn't Work

The company I'm working for uses Finder Labels to organize a lot of their data. So they tend to keep their windows in list view, sorted by label. This worked out fine until the upgrade to Tiger. Now when they open folders on the server they have to click a few folders before the finder will sort them by label correctly. The fix only applies to that level though. If they twirl down one of the sub-folders, that folder is not sorted properly. Of course once they click on a few folders in that sub-folder, the Finder will eventually sort them correctly.
I have reproduced this problem on machines running 10.4.3 and 10.4.5 accessing files on both Windows 2000 server and OS 10.4.3 Server. This problem only occurs when accessing folders over the network. It does not happen with local files. This problem is not reproducible on 10.3.9.
Has anyone else seen this issue? Is this a bug, and if so, has it been reported?

I'm really looking for confirmation more than a fix at this point. Can anyone replicate this issue?
I'm currently using an Automator solution to open the folders automatically, so that the Finder will sort the labels correctly when users access them later. However this is not a quick task, and I'm hoping this problem gets addressed.

Similar Messages

Sorting by dimensions doesn't work

Running CS2, Bridge 1..04.6, Camera RAW 3.7. I have a folder of 40 NEF filessome landscape, some portrait, when I CTRL A and then Sort by dimensions, I thought it would group all the landscape images first (or 2nd) and then the portrait sizes, but it makes no alteration to the order at all. Any ideas why not?
Thanks

I've dug a bit deeper. In Bridge if the images are either landscape or portrait then the dimensions come up exactly the same, ie the largest side first, eg:
landscape = 3072 x 2304
portrait = 3072 x 2304?
Hence the reason sorting by dimensions doesn't work. So I imported a landscape and a portrait into CS2 and just resaved them. Now looking back into bridge it's applied the correct dimensions so the sort works.
landscape = 3072 x 2304
portrait = 2304 x 3072 (correct)
There is a bug in Bridge that doesn't read image dimensions correctly. Does anyone a fix, I don't want to create an Action to resave all my images again.

Sorting by name doesn't work

I recently upgraded my macbook pro to mountain lion, and cannot seem to get the finder to sort my files and folders alphabetically (by name).
I have tried all of the following methods:
clicked the gear in the finder -> arrange by -> name
clicked the icon with the boxes and the lines above them -> name
clicked view -> arrange by -> name
None of these methods work. The files and folders are still in a seemingly random order (e.g. mockups, AWS, Business, Corporate, Collaboration, Technology).
Other sorting methods work (kind, application, date modified, etc.) as expected. It is sorting by name that doesn't work (sorting by name, and sorting by none do not affect the order of the files and folders).
Any advice on how to make this work would be appreciated. It was working fine for me with snow leopard before I upgraded.
Thanks!

Hello,
I tried finding the preference file (as this was recommended in another post as well), but am having trouble. It is not under: library->preference->com.apple.finder.plist and does not show up when I do a search (making sure I search 'this mac').
I should also mention that I am using the column view.
Thanks!
Brody

DYMO Label doesn't work correctly since installing mavericks

After installing mavericks, DYMO Label didn't work. So I updated DYMO Label to 8.5.0.1836. Now I can print address labels, which is fine.
But if I want to SAVE a label, the first two lines of the address are put together and the layout confuses. So I have to separate the first to lines manually befor printing the label the next time.
Are there any other users with this kind of problem? And if so: Are there any ideas to solve that problem?
Thanks
FM

I updated to Mavericks 3 days ago and am working through my printer issues. The one solved this morning was my Dymo LabelWriter Twin Turbo, which was not recognised as available, and the Dymo app (version 8.2.2.1172) simply said it had an error. I wrote a help ticket to Dymo and someone from their Helpdesk very helpfully sent a set of instructions (below) which cured the issue. I followed everything to the letter, copying off all my Dymo files, installing new software from the specified address, deleting all Dymo driver files from my MacPro, and it all worked out. Once installed, I tested creating, printing and saving new labels. Then I put back all my saved label files from the previous version of the software, and had no problem printing labels, even with my custom graphics. The software also chose the correct side of the printer to print from without any intervention from me (the previous software kept defaulting to the wrong label size). It also chose the correct custom graphic for default insertion without me having to set it. Thus far (at least) all is well.
Thank you for contacting Dymo Helpdesk.
My name is Georgi and I will be glad to assist you.
I would like to inform you that Label Writer 450 Twin Turbo is compatible with Mac OS X Mavericks.
In an attempt to resolve the current issue, please be so kind to follow the below instructions for a complete
reinstall of the software and the drivers:
- First please copy on a USB stick all your saved labels and addresses, if any. They have extension .label and .abx.
- Unplug the USB cable of LabelWriter 450 Twin Turbo from the Mac, if it is currently plugged in.
- Just in case please check once again if its icon appears Printers & Scanners and if it is there, please delete it.
- Uninstall Dymo Label Software by deleting it from HD > Application.
- In the Spotlight type ‘terminal’ and launch this application. The default location is under Applications>Utilities
- Enter or copy/paste the following commands into the Terminal window. Press the return key after you enter each line of text:
defaults write com.apple.Finder AppleShowAllFiles YES
killall Finder
        - In Finder go to HD (HardDrive) -> Library -> Application Support -> DYMO Label Software and delete everything by dragging and dropping the entire folder to the Trash bin.
       - In the Finder’s search (situated in the upper right corner of its window) type “Dymo” and delete everything that gets shown.
       - Reboot the Mac and install Dymo Label Software from the below link:
http://download.dymo.com/dymo/Software/Mac/DLS8Setup.8.5.1.dmg
Finally, please plug your LabelWriter 450 Twin Turbo at the end of the installation and try printing a label.
Thank you in advance for your time.
Please let me know about the result and the eventual error messages.
Kind regards,
Georgi XXXXX
Dymo Helpdesk

'Sort order column' doesn't work for prompt with function

I turned on the 'sort order column property' in repository for a logic column 'school year', so when I get school year from prompt, it shows desc order. It works fine if th colume in prompt is a simple prompt. But when I add function in the column in prompt (means edit Fx with a case statement), when school year prompt shows in dashboard, it is not sorted in desc order any more, it went back to acs.
Am I missing something, or this is a bug?
Another question, when I turn on 'sort order column property' in repository for a logic column, can I choose to desc on another column? I couldn't do it, and had to create another sorting column.
Thanks,
Amy

Cant you create this logic in the rpd and then apply order there and use the newly created column in your prompt..

[BUG] Sort - Capture Time doesn't work, movies?

I found a strange bug: when set on Capture Time order, all my Nikon D300 photos are correctly sorted, however some movies I took with an old Canon bridge camera are placed in the wrong spot.
As you can see from the date and hours, they are presented before where they should be.

This is a symptom of a more general issue: LR 3's handling of video metadata is incomplete and inconsistent with the way it handles photo metadata.
With photos, LR reads and writes metadata either from the photo directly or a sidecar. Even if the photo is missing all metadata, you can still edit it in LR and write it back to the photo (or its sidecar). In particular, you can edit Metadata > Edit Capture Time and then write it back to the photo.
But with videos, although LR reads metadata from .thm sidecars, it never writes it back to the sidecars -- the Metadata > Save Metadata To File fails silently. You can edit all the metadata (e.g. caption, rating, keywords) in the catalog except Capture Time.
If you import a photo that's missing the metadata field DateTimeOriginal (aka Capture Time), LR uses the file's creation date as the date that appears above the thumbnail, and the thumbnail will sort properly by Capture Time with respect to other thumbnails. (Note that the date above the thumbnail and Capture Time are two different catalog fields -- a photo can have a thumbnail date but no Capture Time.)
Similarly, if you import a video that's missing DateTimeOriginal, LR uses the video file's creation date as the date above the thumbnail. But unlike with photos, it does not sort properly by Capture Time with respect to other thumbnails (and LR won't let you invoke Metadata > Edit Capture Time to fix the problem). This is the particular symptom you've observed.
As an aside, it would be better if LR used a file's Date Modified rather than Date Created as the default "thumbnail time" and capture time. Windows preserves Date Modified if you copy a file, whereas Date Created gets changed to the current time. So if your camera doesn't produce video sidecars, and you copy the video file in Windows before importing it, LR won't get the correct date the video was taken.
A workaround to this problem is to create manually a .thm sidecar file for your video with the right DateTimeOriginal before importing it. Create a .jpg file with the same base name as your video and use LR or another tool to set its DateTimeOriginal metadata field. Then change the file's extension to .thm. Finally, import the video file into LR, and it will pick up the DateTimeOriginal from the .thm.
This mess with video metadata is a good reason to keep using the third-party plugin in LR 3 to manage video files.

Click event on a label doesn't work after a certain amount of time?

I'm having a weird kinda a problem with my label.....I had given a click event on the label but the problem here is that...it won't take any event after a certain amount of time....i mean..it takes the event if you click on it when it is loaded but after sometime it won't take any event...
And there's one more thing which is that...i've some images too on the page but the images doesn't show up until and unless my mouse gains focus on the page...i.e I've to move my mouse over the page once then only i'm able to see the image...
Any help on how to solve this problem.....

The problem is that...the project size is too big and i really don't know where to upload the project.....
Any help and still thanks for the reply...
Waiting...

Sort on date doesn't work

I recently upgraded from OS 10.4.11 to 10.6.4, and I find iCal isn't working terribly smoothly. The version I now have is 4.0.3.
Specifically, the "sort on date" command sorts only about half of the visible to dos, so some are at the top, then there's a run of undated to dos, then more dated ones.
IIs this a recognized & fixable problem? and if I can fix it, how do I go about it??
Many thanks in advance for your help.

Hi
I have just tried this out on my local Discoverer Viewer 10.1.2.1 and it worked exactly the way it is supposed to. I have been using 10.1.2 since it first came out and am unaware of any issues in this area. Are you able to re-create this using the Video Store business area? If so, I have that and will be able to take a look for you.
Best wishes
Michael Armstrong-Smith
URL: http://learndiscoverer.com
Blog: http://learndiscoverer.blogspot.com

APEX_ITEM report - SORT doesn't work

Hi,
For the following report, the SORT doesn't work. I've also tried with the "Report Attributes", but same result. Does someone know is there a way to make it sorted or can confirm it's not possible.
Thanks.
SELECT
APEX_ITEM.CHECKBOX(11,id_cc_delai_recueil) id_cc_delai_recueil,
APEX_ITEM.HIDDEN(12,id_cc_delai_recueil)||APEX_ITEM.HIDDEN(13,id_cc_regle)||APEX_ITEM.TEXT(14,numdelai,3) numdelai,
APEX_ITEM.SELECT_LIST_FROM_LOV(15,typedoss,'DOSSIERS OU DOCUMENTS',NULL,'NO') typedoss,
APEX_ITEM.TEXT(16,suppdoss,3) suppdoss,
APEX_ITEM.SELECT_LIST_FROM_LOV(17,rem_suppdoss,'REMARQUE_DELAI',NULL,'YES','','') rem_suppdoss,
APEX_ITEM.TEXT(18,perioactif,3) perioactif,
APEX_ITEM.SELECT_LIST_FROM_LOV(19,rem_perioactif,'REMARQUE_DELAI',NULL,'YES','','') rem_perioactif,
APEX_ITEM.TEXT(20,periosmact,3) periosmact,
APEX_ITEM.SELECT_LIST_FROM_LOV(21,rem_periosmact,'REMARQUE_DELAI',NULL,'YES','','') rem_periosmact,
APEX_ITEM.SELECT_LIST_FROM_LOV(22,dispoinact,'DISPOSITION1',NULL,'NO') dispoinact,
APEX_ITEM.SELECT_LIST_FROM_LOV(23,rem_dispoinact,'REMARQUE_DELAI',NULL,'YES','','') rem_dispoinact
FROM
cc_delai_recueil
WHERE id_cc_regle = :P52_ID_CC_REGLE
ORDER BY
3,
2

Paulo,
Remove the Order By clause from your Select statement and then use the Report Attributes to determine your sort order.
Jeff

What's going on with ios8... Screen rotate does not work anymore, wifi doesn't work very well anymore and apps are crashing or running slow... Come on Apple sort this mess out

ssince I updated my iPhone 5s to ios8 ive had nothing but problems...
first the the screen rotation is not working... Checked the settings and lock is off.... The wifi is intermittent, some times it works sometimes it doesn't....
the he iPhone is really slow now, like really labouring.... It hangs and crashes all the time.... I have to close apps down completely because they won't work from quick launch anymore.... Even writing this the phone is labouring.... It's like my old 48k spectrum.... I don't expect this from Apple and when you spend £400-500 on a phone you expect it to work and play propperly.... come on Apple you need to sort out this mess of a update.... Ios 7 was no bother......

Same issue here... iphone5S 64GB. It's intermittent. Sometimes the rotation works fine, sometimes it doesn't, but most of the time it doesn't work.
The first time I figured out it wasn't working was when all newly-taken photos and videos were showing up in portrait mode though I always hold in landscape mode when photographing.
Rotation lock is disabled (tried toggling it on and off). Tried recalibrating the compass on a whim, no effect (although my compass seems to always require calibration when it's launched now).
This issue only started happening after upgrading to iOS8. I did a reset/restore through iTunes rather than an OTA upgrade.
UPDATE - power-cycling the phone seems to fix it temporarily.

Sort Albums Doesn't Work

I have a bunch of albums in iPhoto that I am trying to sort, and it just doesn't work.
When I select them, right-click, and choose "Sort Albums" from the context menu, either *nothing* happens, or else the order of the albums is altered in some seemingly random way but the results are not alphabetical order.
I don't see how the program could somehow not understand "alphabetical" so there must be something keeping it from actually doing the sort. Anybody have any clues?

When there is a selection, if "Sort Albums" will do nothing then the option should be greyed out. Otherwise, it should sort those items which are selected. Doing nothing and giving the user no feedback is not acceptible.
You are right, that is confusing. It is either a bug or a poor design.
You may want to send feedback to Apple - use the form: Apple - Aperture - Feedback

Sort function doesn't work E12

the sort function doesn't work half the time on Elements 12 organizer.

What about FUNCTION CLOCK_INFormula
RETURN NUMBER
IS
    l_hours_worked NUMBER;
    l_to_return     NUMBER;
BEGIN
    l_hours_worked := TO_NUMBER(NVL(:ATX_CLOCK_IN,'0'));
    IF (MOD((l_hours_worked - 0.02),0.25) = 0) THEN
        l_to_return := TRUNC((l_hours_worked - 0.02) * 4) / 4;
    ELSE
        l_to_return := TRUNC((l_hours_worked + 0.23) * 4) / 4;
    END IF;
    RETURN (l_to_return);
EXCEPTION
    WHEN VALUE_ERROR THEN
        RAISE_APPLICATION_ERROR ( -20100
        ,   'ERROR, Cannot represent '
        || :ATX_CLOCK_IN
        || ' as a number.');
END CLOCK_INFormula;?
This function assumes :ATX_CLOCK_IN is always positive.
T.

Function adobeDPS.libraryServices.folioMap.sort doesn't work

Hi, I'm working with custom storefront and until yesterday the function folioMap.sort works fin, I get all folios published with this function, but today it doesn't work, I get always a empty array and my library looks like this:
And if i debugger it I found that my folios is always an empty array:
What am I doing wrong?

Hi Neil, Thank you four your answer.
Yes, I'm updating library. This is my code:
adobeDPS.initializationComplete.add(function(){
Store.init();
Store.init = function(){
 var transaction = adobeDPS.libraryService.updateLibrary();
 transaction.completedSignal.addOnce(Store.updateLibraryHandler, this);
Store.updateLibraryHandler = function(transaction){
 Store.folios = [];
 // Sort the folios descending.
 var list = adobeDPS.libraryService.folioMap.sort(function (a, b) {
 if (a.publicationDate < b.publicationDate)
 return 1;
 else if (a.publicationDate > b.publicationDate)
 return -1;
 else
 return 0;
//HERE Store.folios always is empty
Thank you very much.

SPGridView - sorting Dates doesn't work properly & how to display the title column as link?

Hi,
I've got a SPGridView that is being filled with data from several lists. Some of them are a date-field and a title-field. I already added sorting, paging and filtering options and at first look they seem to work fine. But now I noticed that sorting dates
doesn't work as expected. If I select ascending sorting, the result is something like this:
01.08.2014
02.08.2014
17.07.2014
18.07.2014
23.07.2014
If I select descending sorting, the result is this:
23.07.2014
18.07.2014
17.07.2014
02.08.2014
01.08.2014
This isn't what I want obviously.
I just added the EventReceiver for the sorting like it is shown in several tutorials:
(The date field is a BoundField.)
grid.Sorting += new GridViewSortEventHandler(grid_Sorting);
private void grid_Sorting(object sender, GridViewSortEventArgs e)
if (ViewState["FilterExpression"] != null)
gridDS.FilterExpression = (string)ViewState["FilterExpression"];
And my second problem is how to add a link to the title column. In my grid I'm displaying tasks from different lists and I want to link the title to the related task. I stumbled accross HyperLinkFields and tried this:
HyperLinkField hyperLinkField = new HyperLinkField();
hyperLinkField.DataTextField = "Titel";
hyperLinkField.DataNavigateUrlFields = new string[] { "Titel" };
hyperLinkField.DataNavigateUrlFormatString = "{0}";
hyperLinkField.HeaderText = "Titel";
hyperLinkField.SortExpression = "Titel";
grid.Columns.Add(hyperLinkField);
The resulting link is something like ...sites/MySite/_catalogs/masterpage/A1-V1-2 where "A1-V1-2" is the name of the task and also shown in the title field.
The actual link should look more like ...sites/MySite/Lists/mytasklistname/DispForm.aspx?ID=.... or something like that to display the task details. How could I achieve that?
Thanks in advance

http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Server/MS-SharePoint/Q_27718782.html
Here is the exact code you need to use:
http://social.msdn.microsoft.com/Forums/ar/sharepointcustomization/thread/c463a8c6-4806-4233-b6a4-8db8369c5fc2
http://sharepoint.stackexchange.com/questions/53459/change-title-linked-to-item-with-edit-menu-to-different-column
Open the AllItems.aspx page for the specific list.
Search for the <ViewFields> tag
List item LinkToItem="TRUE" to whichever column you want the link:
<ViewFields> 
<FieldRef Name="Attachments"/> 
<FieldRef Name="LinkTitle"/> 
<FieldRef Name="linkThisColumn" LinkToItem="TRUE"/> 
<FieldRef Name="data_x0020_column"/> 
<FieldRef Name="Another_x0020_column"/> 
</ViewFields> 
http://sharepoint.stackexchange.com/questions/58954/link-title-in-list-to-value-in-url-column
Create calculated column.
Insert following formula -
="<a href='"&UrlFieldName&"'>"&Title&"</a>"
Set "data type returned from this formula is" to integer.
As a result on list view you will see the title with link to your url.
UPD: It seems that URL field is not valid for calculated column, as workaround you can copy url value in a receiver into the another text field, which is not shown on the view.
If this helped you resolve your issue, please mark it Answered

Within Music Library can anyone please explain why when I select the option to sort 'Album by Artist' a number of tracks are being treated as separate albums? How can I correct this? I have tried to 'drag and drop' but that doesn't work.

Within music Library can anyone please explain why after I select the option to sort 'Album by Artist' a number of tracks are being treated as separate albums? How can I fix this? I have tried to manually correct by 'drag and drop' individual tracks but that doesn't work. My music library includes a number of repeat album artwork images simply because not all tracks are being listed under the one album making my library more difficult to use than it should. Any advise would be appreciated.

See Grouping tracks into albums.
tt2

Sort By Label Doesn't Work

Similar Messages

Maybe you are looking for