Sort issue on graph (line/bar) X-AXIS when using dates

I have a line chart using dates on the x-axis, formatted as mm/dd/yyyy. This worked fine until the new year and now the sort order displays 01/xx/2008 before (left of) a 12/xx/2007 date.
My quick fix was to change the format to yyyy-mm-dd, but I really don't like the way this looks.
Is there a better solution?

Hi Jason,
here is the steps you should follow in order ro set the sorting for barchart.
1. go to chart expert
2. click on data tab
3. select the field in the selected list of report columns on which you have to sort, then the order button will be enabled
4. click on the order button
5 it will open new window by name "chart sort order", where you can set the sorting order(ascending order, descending order, specified order or the original order) for the selected report column.
I hope this will help you..
Regards
Deepa

Similar Messages

Problem with Pivot Table with Graph: Line Bar Combo

Hello people!
I have a problem with pivot table and line bar combo (all in the same view (pivot table))
I have some measures and one dimension in my report.
--------------measure1---measure2---measure3
Dim A.1
Dim A.2
Dim A.3
If I choose my graph line bar combo automatically choose "line" measure 3 (last measure in "Show Controls"). How can I do if I want my measure1 for line and I don't want modify my pivot table?
Thank you very much!

Ok, I'll explain my problem again. In my pivot table I add graph vision and I want in the same view (Pivot table). My graph is "Line Bar Combo" and I don't know how but the last of my measures belongs to right AXIS, if I change order of my measures I can see in my graph the measure that I want in my right axis BUT also it changes the order of my pivot table.
This is my problem. I think that I can do that with different views but I lose my selector view to view graphic and my pivot table at the same time.

How can I make the status bar hide automatically when using safari?

How can I make the status bar hide automatically when using safari?

When Safari is in FullScreen mode, menu bar will be hidden.
Safari window to fit the screen?
Move the mouse pointer to the bottom right corner of the Safari window.
Double arrows will appear. Drag it to resize the window to fit the screen.

Issue with complete refresh on materialized view when using rownum

Hi all,
I had an issue with rownum when using complete refresh
I am using rownum when creating materialized view and it is generation correctly.But the issue was when i am refreshing the same ,rownum was not getting sorted in ascending order.
anyone had come across this scenario

rownum is determined as the row is output, so "order by rownum" does literally nothing.
http://docs.oracle.com/cd/B19306_01/server.102/b14200/pseudocolumns009.htm

Line breaks in emails when using Gmail

*The problem arises because the iPhone uses "Plain Text" to send emails.*
*When using gmail, gmail automatically inserts line breaks in "Plain Text" emails every 78 characters, the reason why you see the breaks when unexpected.*
*See: http://www.google.com/support/forum/p/gmail/thread?id=4d1cecc1aab102ef&hl=en*
*To fix this problem:*
*1. Apple can allow us to send mail with Rich Text support from iOS devices OR*
*2. Google has to change the line breaks setting so that Plain text flows (and isn't broken) <-- this option is probably more realistic*
*I have tried from a hotmail account, sending email as plain text doesn't have line breaks imposed like the gmail account, but rather "flows".*
*If you want gmail to add a setting to disable line breaks in plain text emails:*
*Suggest the feature here:*
*http://mail.google.com/support/bin/static.py?page=suggestions.cs*
*I chose these categories:*
*- I have another idea*
*- Sending and receiving*
*- - - Composing and delivery*
*- - - - Sending options*
*-For comments: Configure or disable plain text wrap length.*

I am having the same problem with an IMAP/SMTP account. It was a GMail account, I switched it to using the GMail auto setup and haven't had any issues.
But under the standard IMAP/SMTP setting almost 1/3 of all messages were showing no content.
Though I don't recall exactly - I think most of them were sent while I was on 3G, and it otherwise works fine on WiFi.

Commenting a Line in ABAP Editor when using SAP GUI for java

Hi,
In ABAP editor we can highlight the line which are to be comment and use cmd+< sign to comment those lines. What will be the command to be used to achieve the same functionality when using SAP GUI for JAVA on an iMac.

Hello Kedar,
please check with SAP GUI for Java 7.20 rev 5 before submitting a bug report.
Also please verify, that cmd-< and cmd-> are not assigned as "Keyboard Shortcuts" in the "Keyboard" control panel of "System Preferences".
Bug reports can be submitted with the [SAP Message Wizard|http://service.sap.com/message], for SAP GUI for Java please use component BC-FES-JAV.
Best regards
Rolf-Martin

Sorting issue on - around 20 records based on one field Data Manager

Hello Experts,
We are facing issue sorting some records which belong to one contract.
if we sort by one field ie item no, it is not sorting based on this field. This issue only one set of contract only.
For other set of data, sorting is working fine.
Any hint will be appreciated.
Thanks in advance

HI saptest,
I have not heard of such a issue,please provide detailed description of the same to give a better idea.
Thanks,
Ravi

Compile error "input line is too long" when using useLegacyAOT

I'm using FlashBuilder 4.7 and the release of AIR 4 on Windows 7 to package for iOS...As soon as I include 3 or more ANEs I can no longer compile to iOS (and also use the new "useLegacyAOT no" command). When I try I get an error "The input line is too long. Compilation failed while executing : compile-abc"
I found a couple other similar issues. One post suggested instead of pointing to individual ANEs (in Package Contents) to point to a folder instead--but this doesn't fix the
Another post for a slightly different problem said it was fixed in the release of AIR 4.
Any ideas? I wonder if I move my AIR SDK to a simple path (like "c:\air\adt.jar" instead of "C:\Program Files\Adobe\Adobe Flash Builder 4.7 (64 Bit)\eclipse\plugins\com.adobe.flash.compiler_4.7.0.349722\AIRSDK\lib\adt.jar") if it'd help.
Thanks in advance!

Awesome! I got used to the new useLegacyAOT thing very fast. In the meantime, I have to decide whether to remove all my ANEs and test or sit through an interminable build sequence.
What's the current plan for a new release? Is there any way I could get a beta copy just to use during development?
Thanks!

Stack overflow at line: 1792 or 1788 when using the search function

Hello everyone,
My name is Thibault. I am a technical communications specialist. I've been using Robohelp html for a couple of years.
I am working on the user guide of the software application developed where I work.
This is a HUGE project, more than 6500 pages.
We're two technical writers on this project. (This is an inportant detail since my colleague doesn't get the problem).
I need your help because I have been having an annoying issue over the last couple of days.
After the project is generated, I open it in the software, clicking F1.
When I want to use the search function I have this error message displayed:
"Stack overflow at line: 1792" or "Stack overflow at line: 1788"
Do you know where this could come from?
Furthermore, I noticed that this stack overflow only occurs on some words.
I mean, it occurs for the most used words in this project.
We have customers all over the world and over the last week, we've been getting a lot of feedbacks about this error message.
I hope someone will be able to help me on this one!
Thanks in advance!

First of all, thanks for your answer RoboColum(n).
Is the problem only when you search for a topic that contains Flash output?
All my topics contain Flash outputs. I generate my output files on a folder that is embedded into the software.When in the software, I click F1 and the Flash User Guide opens.The search function works (or not) depending on the software version (32/64-bit).
At what point exactly does the stack overview occur?
We have two versions of the software a 32-bit version and a 64-bit version.
The search function works fine with the 32-bit version.
The problem occurs when I use the 64-bit version. When I type in a word, for example "unit", the stack overflow message appears. See below:
As you can see, it looks like the search function freezes while the stack overflow message appears.
And I never get this error message with the 32-bit version of our software.
I also wonder whether you can search on a project that contains no Flash output. Perhaps you could try for us?
What do you mean by that?
As I told you previously, my Flash Player version is a 32-bit one.
Do you think that the issue might come from there?

How do I get rid of various lines around text boxes when using navigation panes

How can I get rid of these various lines that are displaying sporatically around different text boxes . . . but only when the navigation panel is displaying? I previously had the issue and changed the text box properties to no fill. It fixed the problem in the document with no navigation panel, but once the navigation panel is displayed the lines appear. And yes, I fixed the text box properties before creating the bookmarks for the navigation panel.

Every device, browser and browser version has its idiosyncrasies.
Just using a stroke and a drop shadow should not have been enough to require Muse to convert the page fill to an image. Were/are there also other effects on the page? Are the page corners slightly rounded?
Bevel and Inner Glow definitely require an image to be created. Most other effects/properties do not.

Issues with images when using data merge

Here's the deal. We are converting from CS6 to CC2014. I have a file that opens fine in CS6, the merge works fine.
If I open that file in CC2014 it works fine with the exact same list. But, if I relink a new list or change and update the current list, the data merge no longer works for the images in data merge. Even though nothing has changed in the file links.
I get the error that it cannot find the images.
Is this a know issue?
Mac OSX 10.10.1

It could be that the template is some how bunged up, even though it is evidently working in CS6. You might want to try, as a test, setting upa new document in CC, add the data file, put your placeholders in the document and merging. Then change the merge file, then try to update it.
All I can really say is that I have not experienced this issue (yet). And as far as I can tell, yours is the first post on the matter that isn't document corruption related, or that Previewing the records hasn't caused some malady. either needs the template remade or brought into a new file to fix. You issue sounds sort of half-way between.
Mike

BUG: Sorting drop-down lists from the field tab when using "specify item values"

Hi all,
I've finished creating my form now, but I came across this whilst writing up my documentation for maintenance tasks.
This occurs when adding new values to a drop-down list that has the "Specify item values" checkbox in the binding tab checked.
When I then try to sort my list using the built in sort buttons, it will sort the items, but the list of specified values in the binding tab does not sort reorder to stay with the original items in the list. This is hapenning when I sort from the Object > Field tab. If I sort in the Object > Binding tab then the sort will include the specified values.
For example:
A    5
C    2
D    9
Add a new value to get:
A    5
C    2
D    9
B    10
Sort the list using the button:
A    5
B    2
C    9
D    10
But it should be:
A     5
B     10
C     2
D     9

I was able to duplicate this problem and it looks like a possible bug. I've submitted it to support.

SSRS 2008: how to show an empty chart with legend and x and y axis when no data available

Hi,
I am using SSRS 2008, I generated one chart in report designer with the data from Analysis Services (Cube).
According to the dataset, there is no data returned when I run the query. so when I preview the chart, there is nothing but "no data available" showing on the chart.
Here I want to know is there any possible to show an empty chart with legend and x and y axis?
If it is possible, can you tell me how can I make it?
Best Regards.
Connie Zhu

Hi,
When there is no data, the chart displays the message "no data available". But using a little work around, you can display an empty chart.
Please find the below steps given to achieve this
1. Create a new dataset using TSQL to return 1 row of data having the category field and value field set to 0. Add the fields that are necessary for the category fields, series fields and datafields.
   A simple example would be like
   SELECT 'abc' as Category, 0 as Amount
2. Add a new chart, set the category field to 'Category' and set the data field to Amount from above dataset created in step 1.
3. In the new chart, right click the category axis and select axis properties, Click on the labels tab, check on
'Hide axis labels' and then click ok
4. Now set the Visibility property of both the charts depending on the rows returned from your main dataset
   a. click on your main chart and set its Hidden property to :
=iif(CountRows("MainDataSet"),false,true)
   b. click on the new blank chart added and set its Hidden proprety to (the opposite) :
=iif(CountRows("MainDataSet"),true,false)
   Note : Please change the dataset name in above expression "MainDataset" to the name of your chart's dataset
5. Resize the new chart to the same size as your main chart, then position the new chart on the place as the main chart.
   (Note : You can set the position of new chart to be same by copying the location property from the main chart)
6. Now run and observe the result. When there are no rows returned by your main dataset, the new chart (the blank chart) should be displayed.
I've added a working sample of this kind of a report
here.
Hope this helps. Please feel free to discuss if you have any questions.
Please click "Mark as Answer" if this resolves your problem or "Vote as Helpful" if you find it helpful.
BH

Scroll bar in JPopupMenu when used in JList

Hi,
I want variable list (not combo box) where I can add multiple JMenuItems through JPopupMenu. I have created JList in JScrollPane and I have added multiple JMenuItems one by one but in output I am getting the list of JMenuItems without scrollbar. There is no way I can navigate to last JMenuItem in the JList. Could someone help me with integration of JList, JMenuItems, JPopupMenu with scroll bars?
Below given is the sample code. GUI components have been added through Netbeans.
public void updatePopUp()
final JPopupMenu menu = new JPopupMenu();
menu.setBorder(null);
menu.setAutoscrolls(true);
JMenuItem item = new JMenuItem("JMenuItem");
item.addActionListener(this);
menu.add(item);
item = new JMenuItem("JMenuItem");
menu.add(item);
item = new JMenuItem("JMenuItem");
menu.add(item);
item = new JMenuItem("JMenuItem");
menu.add(item);
item = new JMenuItem("JMenuItem");
menu.add(item);
item = new JMenuItem("JMenuItem");
menu.add(item);
item = new JMenuItem("JMenuItem");
menu.add(item);
item = new JMenuItem("JMenuItem");
menu.add(item);
item = new JMenuItem("JMenuItem");
menu.add(item);
item = new JMenuItem("JMenuItem");
menu.add(item);
item = new JMenuItem("JMenuItem");
menu.add(item);
item = new JMenuItem("JMenuItem");
menu.add(item);
item = new JMenuItem("JMenuItem");
menu.add(item);
item = new JMenuItem("JMenuItem");
menu.add(item);
item = new JMenuItem("JMenuItem");
menu.add(item);
item = new JMenuItem("JMenuItem");
menu.add(item);
item = new JMenuItem("JMenuItem");
menu.add(item);
item = new JMenuItem("JMenuItem");
menu.add(item);
item = new JMenuItem("JMenuItem");
menu.add(item);
item = new JMenuItem("JMenuItem");
menu.add(item);
item = new JMenuItem("JMenuItem");
menu.add(item);
item = new JMenuItem("JMenuItem");
menu.add(item);
item = new JMenuItem("JMenuItem");
menu.add(item);
item = new JMenuItem("JMenuItem");
menu.add(item);
item = new JMenuItem("JMenuItem");
menu.add(item);
item = new JMenuItem("JMenuItem");
menu.add(item);
item = new JMenuItem("JMenuItem");
menu.add(item);
item = new JMenuItem("JMenuItem");
menu.add(item);
item = new JMenuItem("JMenuItem");
menu.add(item);
item = new JMenuItem("JMenuItem");
menu.add(item);
item = new JMenuItem("JMenuItem");
menu.add(item);
item = new JMenuItem("JMenuItem");
menu.add(item);
item = new JMenuItem("JMenuItem");
menu.add(item);
item = new JMenuItem("JMenuItem");
menu.add(item);
item = new JMenuItem("JMenuItem");
menu.add(item);
item = new JMenuItem("JMenuItem");
menu.add(item);
item = new JMenuItem("JMenuItem");
menu.add(item);
item = new JMenuItem("JMenuItem");
menu.add(item);
menu.setVisible(true);
menu.pack();
varList.add(menu);
// Set the component to show the popup menu
/* this.addMouseListener(new MouseAdapter() {
public void mousePressed(MouseEvent evt) {
if (evt.isPopupTrigger()) {
menu.show(evt.getComponent(), evt.getX(), evt.getY());
public void mouseReleased(MouseEvent evt) {
if (evt.isPopupTrigger()) {
menu.show(evt.getComponent(), evt.getX(), evt.getY());
}

I was going to say try setting the preferred (or maximum) size of the scrollpane to force it to be no larger than you want.
But ...
a) I don't see you putting menu items in a JList in that code. You are putting them directly into the popup menu (aka, the normal way to do things).
b) Calling setAutoscrolls() on the JPopupMenu does not make it a "scrollable" menu. It is for supporting dragging of components in a scrollpane (usually). Read the API docs.

Graphic Styles - issue with creates style expanding to background when used

I have created a background style to use as a wire frame, and having created it, every time I use it the frame expands to the back ground size?

Thank you Peter and Amebr for your assistance. I ended up using RH Multilevel List Style, configured, and created an identical List Style in Word. I created a Single and a Multilevel (e.g., Level = bullet, Level 2 = squares); their challenge is matching RH indents with Word Indents... It's sort of a bear since RH does not have the Format Paragraph option (ref. drop-down) like Word Lists - Numbering functionality.
After generating my print document mu Bullet style reads "Normal (Web)"; even though the RH CSS Wizard recognized Word List Style I created (Ref. Font: Symbol, Font color: Black, Indent: Left: 0.15", Hanging: 0.25", Outline numbered + Level: 1 +, Numbering Style: Bullet + Aligned at: 0.15" + Indent at: 0.4", Priority: 100, Based on: No List.
Question: Would anyone out there know why is when I highlight my bullet list to verify the correct Style (with the Styles pane open) and I see the "Normal (Web)" [its Style type = Paragraph and Style based on = Normal) is selected? If it came through (from Rh) as a true Multilevel List Style, I should not see anything.
Happy Holidays!
~PM

Sort issue on graph (line/bar) X-AXIS when using dates

Similar Messages

Maybe you are looking for