Sort Mail by Number of Messages per Sender

Is it possible to sort mail by the number of messages per sender, in descending order with the the greatest number on top, etc. and if so, how?
Thank you!

At the moment you can do this using the "setmsgperconnect" command, however the setting is global so it will apply to all destinations, not just Yahoo. From what we've seen at other customers the impact of dropping this to 5 for all destinations is generally not noticeable.
We're considering adding this into destination config, although at this stage there's no ETA on it.

Similar Messages

  • How to limit mail size of outgoing messages per domain/user

    Hello,
    i want to limit the size of a mail a user can send. For inbound mail there are attributes in the directory service: mailDomainMsgMaxBlocks and mailMsgMaxBlocks.
    But these limitations only enforce the size of incoming mail.
    I've read the messaging server admin guide but all i could find out is that i could limit the size of outgoing mail via a channel.
    For me this solution ist not granular enough. I want to set the outgoing mail size limit per user. Furthermore i don't know the impact of configuring 200+ channels for enforcing individual outgoing mail size limits per hosted domain.
    Does anybody know a solution for this problem? Maybe i've read over something. Or can anybody tell me the performance impact of 200+ channels at least?
    Thank you very much,
    af_inet
    JES 2005Q1, Solaris10, V440

    Hi jay_plesset,
    thanks a lot for your clarifications.
    Why would you need 200 channels? That sounds like a
    very strange setup. Setting outbound max size per
    user sounds like a very unusual demand, too.Let me explain: I got several departments who control their email settings in the messaging server via a webapp. So they can add, delete and modify users. They can manage mailing lists and so on. It's really a cool tool :-) I want this thing to be as granular as an own mailserver for the department would be. So it would be cool when the webapp writes an attribute like maxMsgBlocks in the DS and the thing is done.
    I don't understand why you guys could do the stuff for inbound but not for outbound. Is there a technical reason or is it just because it seems strange? :-)
    If you REALLY need something like that, 200 channels
    would need a POOL of at least 200 jobs in order to
    reliably run, and that's likely to need lots of
    system memory.I think that's not the way i want to go.
    Consider a custom channel, or something like that,
    that does an LDAP lookup for setting message size on
    sending. You'd need to enforce smtp authentication,
    so you know who your messages are coming from, first,
    and then you could proceed from there. This is not a
    trivial setup.Sounds interesting. Any documentation hints for custom channels?
    Thanks again for your reply,
    af_inet

  • Email returned Mail delivery failed: returning message to sender

    You would think I had the email wrong,  but I  copy/pasted it,  then reset it and copied pasted again.
    Photosmart D110 series.
    Wireless forks fine for printing. 
    This message was created automatically by mail delivery software.
    A message that you sent could not be delivered to one or more of its
    recipients. This is a permanent error. The following address(es) failed:
    [email protected]
       SMTP error from remote mail server after end of data:
       host email-lb-cpg.austin.hp.com [15.217.96.213]:
       550 5.7.1 Command rejected
    ------ This is a copy of the message, including all the headers. ------

    Are you still unable to send email?  What client are you using?  Do you see your job represented on ePrintCenter?
    Although I am an HP employee, I am speaking for myself and not for HP

  • "Mail Delivery Failed:returning message to sender" recipients not familiar

    I am getting a "Mail Delivery Failed" message. The address' that failed are to recipients I am not familiar with and have not tried to email. Has my email been hijacked?

    I'm getting the same problem ... only it happens to anyone who sends a message TO me. This only happens on my .mac address --- not other email addresses that I use. It's as if the .mac smtp code is ADDING a bcc to any message sent to me! All the comments to date have been less than encouraging - surely SOMETHING can be done about this! No?

  • Mail will not allow messages to send...

    So I have 2 POP accounts in Mail that I recently set up. Both receive mail without any issues, however, neither will send mail. Both outgoing servers are correctly typed in the outgoing server preference, and also I have selected that no authentication is necessary. Any ideas?
    Thank you,
    Chris

    Hi Ernie,
    One of them isn't for sure, the other I'm not sure about. The ISP I am using is actual an ethernet on the campus of the lab I work in as a grad student. One of the email addresses uses the SMTP of this school (ie, its a school email account, so I imagine it is as close as I could get to an SMTP native to the ISP). I have pinged both outgoing mail servers, and they are on and active according to the pings. There is no firewall on according to my sharing preferences. How do I check for freedom of movement on port 25?

  • Mail delivery failed: returning message to sender (Only One User)

    Hi,
    I am facing really strange issue from last two days but fail to resolve the issue.
    My hosted exchange 2010 is working absolute fine. I configured new domain (previously using SBS2003 with Postini service), all users are working fine no spam emails, NDR etc (We are using Forefornt Protection 2010 for Exchange Server, All engines are updated)
    but only one user/email address continuously receiving spam emails. Please review the attach pictures of Message Tracking, Email and Header.
    I really don't know what is the issue, users continuously receiving below emails after 2 or 3 minutes, i am just wondering why my exchange server allow those email address. How i can stop these emails. 
    Note: Old SBS server is shutdown. Postini service is already disabled.
    Please help me.
    Mail:
    Header & Tracker:

    Hi,
    According to your description, it seems that the user's computer has virus. 
    I recommend you scan the user's computer and check if any virus caused the issue.
    Thanks.
    Niko Cheng
    TechNet Community Support

  • Mail delivery failed: returning message to sender

    Each time a form is submitted I get the following email and it's very time consuming and frustrating.  Any help in resolving this issue will be greatly appreciated.
    This message was created automatically by mail delivery software.
    A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed:
      [email protected]
        SMTP error from remote mail server after RCPT TO:<[email protected]>:
        host adobe.com.mail5.psmtp.com [64.18.5.10]: 550 No such user - psmtp
    ------ This is a copy of the message, including all the headers. ------
    Return-path: <[email protected]>
    Received: from austindo by gator3132.hostgator.com with local (Exim 4.80.1)
          (envelope-from <[email protected]>)
          id 1VLxH1-0004pa-ES
          for [email protected]; Tue, 17 Sep 2013 10:33:07 -0500
    To: [email protected]
    X-Autorespond: Getting started with your Adobe FormsCentral Plus account
    MIME-Version: 1.0
    X-Loop: [email protected]
    Precedence: auto_reply
    X-Precedence: auto_reply
    From: "Austin Dog Rescue" <[email protected]>
    Content-type: text/plain; charset=utf-8
    Subject: Adoption Contract Confirmation
    Message-Id: <[email protected]>
    Date: Tue, 17 Sep 2013 10:33:07 -0500

    Do you still have this issue? You can turn off email notifications (under the Options Tab > Email Notifications in FormsCentral) if you do not wish to receive any email when a form is submitted
    Or are you saying you want to receive the email but the format is bad? If this is the case do you mind forwarding one of the email to me ([email protected]).
    Gen

  • Limiting no. of messages per day

    Dear All,
    Can we control the no. of messages a user can send per day? I know that we can limit the no. of conn. per min and the number of emails per conn. But you cannot use this method to limit the number of messages per day effectively.
    Marwan,

    No, there's no real way to limit number of messages per day. Especially when you use more than one relay box.
    Best thing is to use the connection throttling mechanism.

  • Mail 3.5 says sent 2 messages per single message I send

    Just noticed, that for every message I send, Mail says 2 messages sent. Did not notice this before, but very disconcerting. I tried using CLAMXAV to search for a virus, but non found. Any suggestions?

    Steve,
    Welcome to the Discussions.
    If you are using an IMAP account, this is often noticed and normal, as Mail communicates with the Sent folder on the server. If you open the full Activity monitoring window (Window in the menubar/Activity) I think you will see a fuller description of the transmissions.
    Ernie

  • ORA-20001: Maximum number of email messages per workspace exceeded

    Greetings. We are running APEX 4.1.1. I have an application where we have to send out email messages to a list of emails. Currently there are 2469 email addresses. Originally we put the email addresses in the BCC but we received an error that we had exceeded the size limit of the BCC. So we modified our procedure to send one email at a time, in a loop.
    Now we are receiving the following error message:
    "ORA-20001: You have exceeded the maximum number of email messages per workspace"
    Has anyone else run into this issue? What is maximum number or email messages per workspace? Is it a limit per day, per session?
    We have not added emails to this table since last year, so the maximum number of email messages allowed may have changed recently?
    I did find this Forum post that addressed the issue but no one responded:
    How many mails i can send at a time per day using APEX mail system?
    Thanks,
    John

    Hi jfosteroracle,
    You are getting the error may be the following reason,
    Check the following,
    Login as ADMIN and Goto -->Manage Instance-->Instance Settings--> Mail-->Maximum Emails per workspace
    Actually this number denotes the Number of mails can be sent per 24 hour for the workspace,It may exceeded.
    It may be the reason.
    Thank you.     
    Regards,
    Gurujothi
    Edited by: Gurujothi on Jun 27, 2012 5:54 AM

  • Since yesterday I'm unable to send emails alleging I have exceeded the maximum number of emails per day, but I had only sent out 24 and NO bulk emailing -  (much less than 1000 as per the website) and I'm STILL not able to send emails.Any advice?

    Since yesterday I'm unable to send emails on any of my Apple devices. The revert is that I have exceeded the maximum number of emails per day, but I had only sent out 24 with no bulk emailing -  (much less than 1000 recipients as per the website) and I'm STILL not able to send emails. Any advice on how to solve this?

    I have asked a moderator to provide assistance, they will post an invite on this thread.
    Once you get a reply, if you click on their name, you will see a screen like this. Click on the link as shown below.
    Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Duplicate messages in sender mail adapter

    Hi,
    We are using the sender mail adapter to retrieve messages from an IMAP mail server. Messages are being picked up correctly, but when we have large messages (with e.g. PDF attachments) things go wrong.
    The time it takes to retrieve the mail message is longer than the poll time. In this case the adapter logs in again in the mail server to retrieve the first new message from the inbox. However the first adapter threat is already retrieving that message. This results in a duplicate message in XI. (messages are set to be deleted when read).
    We have tried all kind of settings in the adapter but without any results. The adapter works fine with very small messages.
    Does anyone recognize this problem? 
    PS. please do not post links to sap help or the mail adapter FAQ. Useful answers will be rewarded.
    Thanks,
    Christiaan Schaake

    Hi Christiaan !
    I understand your problem. Could you set your IMAP account to avoid multiple simultaneous sessions?? maybe if there is only one session allowed per user or per time, then parallel XI threads will not be able to start downloading the messages.
    If you cannot use a longer poll interval, then you could develop an adapter module for the Mail sender adapter that could be used to verify if the current mail is just being downloaded by other thread. This adapter module could check the unique mail data (date/time + subject + etc.) against a local table.
    Regards,
    Matias.
    PD: please award points if helpful.
    Message was edited by:
            Matias Denker

  • Wrong number of messages in mail title bar

    A minor issue: mail is displaying the wrong number of messages in the title bar of the mail window. (Says 45 when there's actually 16). Quitting & restarting the app fixes it, as does "rebuild", but "get mail" doesn't.
    Thanks!

    I had the same issue after a power failure knocked my iMac down in full operation. For days I had this nagging 1 message unread on my dock icon. I have a massive list of neatly organized hierarchical mailboxes, with an equally massive list of rules to put incoming messages straight into the appropriate mailbox depending on sender, subject, etc...
    Reading this thread gave me the idea to create a smart mailbox with the unread messages. Bam! It showed the one message which was unread, even though the containing mailbox folder didn't show it as unread. That solved the problem.
    You might try deleting the smart mailbox with the unread messages, (eventually stopping Mail, restarting the computer), and re-creating the smart mailbox for unread messages.

  • ITouch error Message  Cannot send Mail.

    My first generation iTouch has quite sending mail. I can receive email, but can not send. When I try to send mail I get the error message
    Cannot Send Mail
    The connection to the outgoing server "smtp.mac.com:jbleeg" failed.
    I am using apples Mail program and have it set up as imap. When I right click on the inbox and choose Edit Imap Accout, I can see the incoming and out going settings match my ipod setting screen.
    This used to work, but when apple went to this "cloud" and .me, it quit working.
    I rarely send email from my iTouch so this is not a big problem, but annoying.
    Any suggestions.
    Jerry

    The other thing you might want to try on your touch is to just delete the mail account and re-enter it. This seems to fix a number of problems with e-mail when you are getting these types of errors.

  • TS3899 My mail is configured correctly.  When I go to view my inbox I get the 'Load More Messages...' with the number of messages showing.  I touch the display and nothing happens.  I have uninstalled and reinstalled the email account and restarted the de

    My mail is configured correctly.  When I go to view my inbox I get the 'Load More Messages...' with the number of messages showing.  I touch the display and nothing happens.  I have uninstalled and reinstalled the email account and restarted the device.  I can send mail fine as well as view my sent messages.  Very confusing.

    I have two yahoo accounts and I know as they 'improved' their servers I had periodic outages. It'd work fine on my webmail on  my computer, webmail on the iPad, but not via the mail app. And it was stuff on their end. It may be a case of wait and see and you may need to eventually remove/readd the account on your iPhone.
    When the issue is on their end, unfortunately there's not much for users to do beyond wait it out or find work arounds.

Maybe you are looking for