Sort memory area problem

Hello,
We have serious memory problem in our SAP query programs. In add-on SAP query programs developed in 4.6C environment consume extremely huge amount of memory (more than 5 GB) after upgrading to ERP6.0.
This happens when sorting output data with keys.
Does anyone have encounter similar problems before?
Any input is welcome.
Regards,
Kazuya

When you select the artist in AppleTV (It happens on my iPhone as well) you get a list of all the albums that contain work by that artist and when you choose shuffle it plays any song from any album listed. So it means that songs in a compilation album will play under shuffle when you choose that artist even if it is not from the chosen artist.
I hope I am explaining myself here.
Let me try again. By choosing an artist you get a list of every album with at least one song by that artist, including compilations. By choosing shuffle AppleTV (or iPhone) will shuffle songs from the list of albums, including the compilations. This means you get songs from the compilation albums that are not from the selected artist.
I am looking for a way to be able to select only the songs by the selected artists and exclude those songs that are not from that artist.

Similar Messages

My 2009 macbookpro has begun running very slowly, apps freeze and pages hang ... i've run EtreCheck and there are problems but don't know how to sort

my 2009 macbookpro has begun running very slowly, apps freeze and pages hang ... i've run EtreCheck and there are problems but don't know how to sort ... ran CleanMyMac and freed up about 30GB of space but didn't help ... ran AdwareMedic so that's been sorted but the other issues that came up on the EtreCheck I need help with however i can't figure out how to paste the results on this page

thanks thomas ... here it comes
EtreCheck version: 2.1.5 (108)
Report generated December 29, 2014 at 5:03:07 PM GMT
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
    MacBook Pro (17-inch, Early 2009) (Verified)
    MacBook Pro - model: MacBookPro5,2
    1 2.66 GHz Intel Core 2 Duo CPU: 2-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1067 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1067 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
    NVIDIA GeForce 9400M - VRAM: 256 MB
        Color LCD 1920 x 1200
    NVIDIA GeForce 9600M GT - VRAM: 512 MB
System Software: ℹ️
    OS X 10.9.5 (13F34) - Uptime: 0:5:36
Disk Information: ℹ️
    FUJITSU MHZ2320BH FFS G1 disk0 : (320.07 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        [redacted]'s world too (disk0s2) / : 319.21 GB (30.39 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    MATSHITADVD-R   UJ-868
USB Information: ℹ️
    Apple Inc. Built-in iSight
    Apple Inc. iPhone
    Logitech USB Receiver
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple, Inc. Apple Internal Keyboard / Trackpad
    Apple Computer, Inc. IR Receiver
Configuration files: ℹ️
    /etc/hosts - Count: 29 - Corrupt!
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Library/Application Support/Roxio
    [not loaded]    com.roxio.TDIXController (1.7) [Support]
        /System/Library/Extensions
    [not loaded]    com.kensington.mouseworks.iokit.KensingtonMouseDriver (3.0) [Support]
        /System/Library/Extensions/KensingtonMouseDriver.kext/Contents/PlugIns
    [not loaded]    com.kensington.mouseworks.driver.ADBID32Mouse (3.0) [Support]
    [not loaded]    com.kensington.mouseworks.driver.ADBID32MouseX1 (3.0) [Support]
    [not loaded]    com.kensington.mouseworks.driver.ADBID4Mouse (3.0) [Support]
    [not loaded]    com.kensington.mouseworks.driver.ADBID4MouseX1 (3.0) [Support]
    [not loaded]    com.kensington.mouseworks.driver.KMWBluetoothHIDMouse (3.0) [Support]
    [not loaded]    com.kensington.mouseworks.driver.KMWBluetoothOldHIDMouse (3.0) [Support]
    [not loaded]    com.kensington.mouseworks.driver.KMWUSBHIDMouse (3.0) [Support]
    [not loaded]    com.kensington.mouseworks.driver.USBMouseX1 (3.0) [Support]
    [not loaded]    com.kensington.mouseworks.driver.VirtualMouse (3.0) [Support]
    [not loaded]    com.kensington.mouseworks.driver.VirtualMouseX1 (3.0) [Support]
    [not loaded]    com.kensington.mouseworks.iokit.KensingtonMouseDriverX1 (3.0) [Support]
Startup Items: ℹ️
    AdobeVersionCueCS2: Path: /Library/StartupItems/AdobeVersionCueCS2
    Firewall: Path: /Library/StartupItems/Firewall
    RetroRun: Path: /Library/StartupItems/RetroRun
    Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Support]
    [loaded]    com.adobe.CS4ServiceManager.plist [Support]
    [loaded]    com.adobe.CS5ServiceManager.plist [Support]
    [invalid?]    com.oracle.java.Java-Updater.plist [Support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Support]
    [invalid?]    com.adobe.SwitchBoard.plist [Support]
    [loaded]    com.adobe.versioncueCS3.plist [Support]
    [loaded]    com.adobe.versioncueCS4.plist [Support]
    [running]    com.atomicbird.macaroni.launchd.plist [Support]
    [loaded]    com.macpaw.CleanMyMac2.Agent.plist [Support]
    [invalid?]    com.oracle.java.Helper-Tool.plist [Support]
    [loaded]    com.prosofteng.DriveGenius.locum.plist [Support]
    [loaded]    com.skype.skypeinstaller.plist [Support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist [Support]
    [loaded]    com.adobe.ARM.[...].plist [Support]
    [loaded]    com.adobe.ARM.[...].plist [Support]
    [loaded]    com.google.keystone.agent.plist [Support]
    [loaded]    com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Support]
    [loaded]    com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Support]
    [loaded]    com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Support]
    [running]    com.prosofteng.DGMonitor.plist [Support]
    [running]    ws.agile.1PasswordAgent.plist [Support]
User Login Items: ℹ️
    CNQL1210_ButtonManager    ApplicationHidden (/Library/CFMSupport/CNQL1210_ButtonManager.app)
    System Events    ApplicationHidden (/System/Library/CoreServices/System Events.app)
    Mail    Application (/Applications/Mail.app)
    Firefox    Application (/Applications/Firefox.app)
    AdobeResourceSynchronizer    ApplicationHidden (/Applications/Adobe Reader 9/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
    Calendar    Application (/Applications/Calendar.app)
    Skype    Application (/Applications/Skype.app)
    Dropbox    Application (/Applications/Dropbox.app)
    AdobeResourceSynchronizer    ApplicationHidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
    MouseWorks Background    Application (/Library/Application Support/Kensington/MouseWorks.prefPane/Contents/Resources/Support/MouseWorks Background.app)
Internet Plug-ins: ℹ️
    AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Support]
    Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
    EPPEX Plugin: Version: 3.0.0.0 [Support]
    AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Support]
    ContentUploaderPlugin: Version: 1.2 [Support]
    iPhotoPhotocast: Version: 7.0
    RealPlayer Plugin: Version: Unknown [Support]
    PDEPrint: Version: 2.0 [Support]
    DirectorShockwave: Version: 11.5.2r602 [Support]
    PDF Browser Plugin: Version: 2.4.2 - SDK 10.2 [Support]
    FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
    QuickTime Plugin: Version: 7.7.3
    CANONiMAGEGATEWAYDL: Version: 3.0.0.2 [Support]
    DivXBrowserPlugin: Version: 1.3 [Support]
    Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
    Google Earth Web Plug-in: Version: 6.0 [Support]
    Default Browser: Version: 537 - SDK 10.9
    Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 [Support]
    JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
    OfficeLiveBrowserPlugin: Version: 12.3.6 [Support]
User internet Plug-ins: ℹ️
    QuickTime Plugin: Version: 6.5.1
    fbplugin_1_0_0: Version: Unknown [Support]
Safari Extensions: ℹ️
    Ultimate [Installed]
3rd Party Preference Panes: ℹ️
    ASM [Support]
    DivX [Support]
    Flash Player [Support]
    Flip4Mac WMV [Support]
    Macaroni [Support]
Time Machine: ℹ️
    Skip System Files: NO
    Mobile backups: OFF
    Auto backup: NO - Auto backup turned off
    Destinations:
        G-DRIVE Mini [Local]
        Total size: 999.86 GB
        Total number of backups: 7
        Oldest backup: 2014-07-09 00:13:07 +0000
        Last backup: 2014-12-10 22:18:57 +0000
        Size of backup disk: Excellent
            Backup size 999.86 GB > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
         6%    WindowServer
         3%    firefox
         1%    mds_stores
         0%    mdworker
         0%    Skype
Top Processes by Memory: ℹ️
    348 MB    firefox
    137 MB    Skype
    122 MB    mds_stores
    120 MB    com.apple.IconServicesAgent
    73 MB    Dropbox
Virtual Memory Information: ℹ️
    1.26 GB    Free RAM
    1.74 GB    Active RAM
    477 MB    Inactive RAM
    543 MB    Wired RAM
    503 MB    Page-ins
    0 B    Page-outs
Diagnostics Information: ℹ️
    Dec 29, 2014, 04:58:09 PM    Self test - passed
    Dec 29, 2014, 10:58:04 AM    /Library/Logs/DiagnosticReports/Keychain Access_2014-12-29-105804_[redacted].hang
    Dec 29, 2014, 10:54:33 AM    /Library/Logs/DiagnosticReports/Keychain Access_2014-12-29-105433_[redacted].hang
    Dec 29, 2014, 10:52:33 AM    /Library/Logs/DiagnosticReports/Keychain Access_2014-12-29-105233_[redacted].hang
    Dec 29, 2014, 10:50:24 AM    /Library/Logs/DiagnosticReports/Keychain Access_2014-12-29-105024_[redacted].hang
    Dec 29, 2014, 10:50:24 AM    /Library/Logs/DiagnosticReports/Skype_2014-12-29-105024_[redacted].hang

I have a Mac mini Snow Leopard. In Numbers the grid lines are so faint that they are barely visible. Please could someone help me sort out this problem.

I have a Mac mini Snow Leopard. In Numbers the grid lines are so faint that they are barely visible. Pleease could someone help me sort out this problem?

The User Manual has this:
Formatting Table Cell Borders
You can change the line thickness and color of table cell borders. Or you can hide the border of any cell.
To format table cell borders:
1 Select the cell border segments you want to format.
2 Use the controls in the format bar or in the Table inspector.
Click to choose a stroke color.
Click to choose a stroke style.
Click to choose a line thickness.
Stroke pop-up menu: Lets you choose a stroke style. Choose None to hide borders.
Line thickness: Controls the thickness of the stroke.
Color well: Lets you choose a stroke color.
When you click the color well in the format bar, a color matrix appears. Select a color by clicking it in the matrix, or click Show Colors to open the Colors window for additional color options.
When you click the color well in the Table inspector, the Colors window opens.
User Guide: http://manuals.info.apple.com/en_US/Numbers09_UserGuide.pdf

Does making objects equal null help the gc handle memory leakage problems

hi all,
does making objects equal null help the gc handle memory leakage problems ?
does that help out the gc to collect unwanted objects ??
and how can I free memory avoid memory leakage problems on devices ??
best regards,
Message was edited by:
happy_life

Comments inlined:
does making objects equal null help the gc handle
memory leakage problems ?To an extent yes. During the mark phase it will be easier for the GC to identify the nullified objects on the heap while doing reference analysis.
does that help out the gc to collect unwanted objects
??Same answer as earlier, Eventhough you nullify the object you cannot eliminate the reference analysis phase of GC which definitelely would take some time.
and how can I free memory avoid memory leakage
problems on devices ??There is nothing like soft/weak reference stuffs that you get in J2SE as far as J2ME is concerned with. Also, user is not allowed to control GC behavior. Even if you use System.gc() call you are never sure when it would trigger the GC thread. Kindly as far as possible do not create new object instances or try to reuse the instantiated objects.
~Mohan

In memory area is enough ,but table can't POPULATED in memory ,cause query in memory slower

hI
any expert can take a look this issue, thanks
SQL> select *　FROM　gv$inmemory_area order by 1;
   INST_ID POOL ALLOC_BYTES USED_BYTES POPULATE_STATUS CON_ID
1 64KB POOL 4278190080   17301504 DONE 0
1 1MB POOL 17177772032 9377415168 DONE 0
2 1MB POOL 17177772032 9380560896 DONE 0
2 64KB POOL 4278190080   17301504 DONE 0
3 64KB POOL 4278190080   17301504 DONE 0
3 1MB POOL 17177772032 9385803776 DONE 0
4 1MB POOL 17177772032 9546235904 DONE 0
4 64KB POOL 4278190080   17301504 DONE                                0
8 rows selected
(IN MEMORY AREA SIZE IS BIG enough)
SQL> SELECT v.owner, v.segment_name name,v.populate_status status, v.bytes_not_populated FROM v$im_segments v;
OWNER                                                                            NAME                                                                             STATUS    BYTES_NOT_POPULATED
BI                                                                               PERFTABLE5                                                                       COMPLETED                   0
BI                                                                               PERFTABLE3                                                                       COMPLETED                   0
BI                                                                               PERFTABLE4                                                                       COMPLETED                   0
BI                                                                               PERFTABLE2                                                                       COMPLETED                   0
BI                                                                               PERFTABLE3                                                                       COMPLETED                   0
BI                                                                               PERFTABLE1                                                                       COMPLETED           165855232
BI                                                                               PERFTABLE4                                                                       COMPLETED                   0
BI                                                                               PERFTABLE3                                                                       COMPLETED                   0
BI                                                                               PERFTABLE1                                                                       COMPLETED                   0
BI                                                                               PERFTABLE4                                                                       COMPLETED                   0
BI                                                                               PERFTABLE5                                                                       COMPLETED                   0
BI                                                                               PERFTABLE3                                                                       COMPLETED                   0
BI                                                                               PERFTABLE2                                                                       COMPLETED                   0
BI                                                                               PERFTABLE1                                                                       COMPLETED           165855232
(table PERFTABLE1   have NOT_POPULATED data) .
cause :IO Requests
select count(*) from perftable1 a, perftable1 b where a.int32_f1 = b.int32_f1.
SQL Plan Monitoring Details (Plan Hash Value=1965173750)
Id
Operation
Name
Estimated
Rows
Cost
Active Period
(100s)
Execs
Rows
Memory
Temp
IO Requests
CPU Activity
Wait Activity
Progress
SELECT STATEMENT
1
. SORT AGGREGATE
1
1
.. PX COORDINATOR
49
... PX SEND QC (RANDOM)
:TQ10000
1
48
.... SORT AGGREGATE
1
48
..... PX PARTITION HASH ALL
202M
81245
48
->
...... HASH JOIN
202M
81245
48
0
689.9MB
1.0GB
3031 (10%)
32%
8.2%
->
....... TABLE ACCESS INMEMORY FULL
PERFTABLE1
200M
36854
48
77M
29926 (105%)
67%
91%
473s
....... TABLE ACCESS INMEMORY FULL
PERFTABLE1
200M
36854

This is the wrong forum for this question. This forum is for the TimesTen In-Memory Database while your question is about the Oracle Database 12c In-Memory Option. Best post this in the main Oracle Database forum.
Chris

Memory increase problem on Solaris

We need your help in understanding and solving a memory problem in one of our products running on Soalris. The server memory keeps growing and there is a fear of a server crash.
We've run our product with Purify and libumem to identify memory leaks. Both of these products didn't report any leak. So, we are very much confident that there are no memory leaks in the product. Still the memory increase is seen on Unix systems. We've done extensive analysis on this subject and absorbed some key points regarding memory management in Unix.
1) Memory doesn't shrink on Unix systems. This is for the libc to retain the released memory and reuse it for further memory requirements.
2) Based on the memory requirements to our application there can be a stabilization point where in the application can serve all memory requests.
After reaching this point the Server memory doesn't increase.But the fear is that it may exceed the hardware resources constraint.
3) Rapid increase in memory can be because of Memory Fragmentation problem. There are environmental variables like Small Block Allocator (_M_SBA_OPTS) and Arena (_M_ARENA_OPTS) on HP-Unix machines which can be used to address Fragmentation issues. We've performed some tests using these variables and found significant improvement in the usage of memory. This confirms that there are no memory leaks. These variables are specific to HP-Unix machines and we are unaware of similar variables/mechanism on Sun Solaris Platform. Please recommend some environmental variables/mechanism on Sun Solaris platform to solve fragmentation problem.
We are performing some tests to observe memory stabilization over a period of time .
The memory bloat is following a pattern. Memory is increasing in chunks of (MB) 2,4,8,16,32,64,128,256,512,1024 MB pattern.
For example if Memory increase is 64 MB, then it stabilizes for some time and the next increase would be 128 MB at a time.
Then it stabilizes for double the time consumed earlier for 64 MB and after that only increases by 256 MB.
So the memory increase and stabilization time are getting doubled each time. Please validate our analysis and kindly suggest what can be done on Unix platforms for solving this memory increase problem.

Thanks MaximKartashev for your inputs.
Ours is a Multithreading application. We are testing it with Hoard for the last three days. The observation so far has been that the performance of Hoard is high but the bloat pattern is not avoided.
Even with Hoard, memory bloat is following a pattern. Memory is increasing in chunks of (MB) 2,4,8,16,32,64,128,256,512,1024 MB pattern.
We are searching for other ways to control this pattern and stabilize the application by making it to reuse the fragmented memory completely.
We have also tried Solaris libgc memory allocator (http://developers.sun.com/solaris/articles/libgc.html). It worked well initially and memory drop was seen. But on heavy load, it crashed the application with 'Can't allocate header' error. So this can't be used for heavy load.
We are trying to use Boehm-Demers-Weiser Garbage Collector (http://www.hpl.hp.com/personal/Hans_Boehm/gc/). Do any one have idea, if it controls memory fragmentation ?

Memory leak problems with loading videos over and over.

I'm having memory leak problems with loading videos into a VideoPlayer aswell as FLVPlayback.
What the flash should do:
- Should be running for 7 days without having to restart the projector.
- Interface that shows people around a 360 3D model with 5 different parts and at the stops it makes during the rotation you can click to zoom in on a location which plays a movie for that aswell.
- Shows a video out of 5 parts for a 360 rotation in 3D in mp4 video (added each time and cleaned up, see code below).
- Still images are used when the video clips are done playing (MovieClip in stage).
- Should run automatically when there is no user interaction for X minutes.
What the problem is:
- The flash (as a exe and swf i guess) starts to consume memory over time (say 10 hours) until the projector crashes. This usually at around 1.75 GB of memory.
I cannot see why the Flash cannot garbage collect this and free up the memory. Mabye there is something I don't understand about the garbage collection in flash?
Here is some code from the video loading and playing:
var fVideo:VideoPlayer;
VideoCreate();
function VideoReady(pEvent:VideoEvent):void
trace("VideoReady()");
     // start playing video
fVideo.play();
function VideoLoad(pUrl:String):void
     trace("VideoLoad(" + pUrl +
     VideoCreate();
     if (pUrl != "")
          if (fVideoFolder + pUrl == fVideo.source)
               fVideo.seek(0);
VideoReady(null);
          } else {
trace(fVideo.state);
               if (fVideo.state !=
VideoState.DISCONNECTED) fVideo.stop();
fVideo.close();
fVideo.load(fVideoFolder + pUrl);
     } else {
// error no url
function VideoCreate():void
     trace("VideoCreate()");
     // remove old one
     if (getChildAt(0) == fVideo)
          removeChildAt(0);
     fVideo = new
VideoPlayer(1024, 768);
     addChildAt(fVideo, 0);
     fVideo.autoRewind = false;
fVideo.addEventListener(VideoEvent.COMPLETE, VideoDonePlaying);
fVideo.addEventListener(VideoEvent.READY, VideoReady);

Hmm. It's in connection with Dropbox. Så apparantly you can only use one of the two at the same time if you want the programs integrated in Finder.

How can I avoid memory leak problem ?

I use Jdev 10.1.2 . I have a memory leak problem with ADF .
My application is very large . We have at least 30 application module , each application module contain many view object
and I have to support a lot of concurrent users .
as I know ADF stored data of view object in http session .
and http session live is quite long . when I use application for a while It raise Ouf of Memory error .
I am new for ADF.
I try to use clearCache() on view object when I don't use it any more .
and call resetState() when I don't use Application Module any more
I don't know much about behavior of clearCache() and resetState() .
I am not sure that It can avoid memory leak or not .
Do you have suggestion to avoid this problem ?

ADF does not store data in the HTTP session.
See Chapter 28 "Application Module State Management" in the ADF Developer's Guide for Forms/4GL Developers on the ADF Learning Center at http://download-uk.oracle.com/docs/html/B25947_01/toc.htm for more information.
See Chapter 29 "Understanding Application Module Pooling" to learn how you can tune the pooling parameters to control how many modules are used and how many modules "hang around" for what periods of time.

HT202159 I am unable to download and always asking password after entering the password also asking same question please help me to sort out this problem.

I am unable to download and always asking the password it's ok for the once and it's asking more and no results only repeating the same so I am unable to download please help me to sort out this problem and my request please sort out from your side or let me guide .

Thanks Eric for responding.
I checked and it does not appear in the Applications folder.
I tried yesterday on an ethernet connection with a download speed of 2 Mbps but, unfortunately the connection died(It happened from the ISP end, which is out of my control) in between after which there was no trace of the download that happened for so long(till the internet connection death).
One more serious query which I am unable to understand. If the internet connection, dies in the midst of the download is in progress why is it so that the state does not persist and one has to restart the entire process again. Is there no solution for this?
I tried so many times and its the same case after some amount of download it vanishes. So many unsuccessful attempts. I am ****** off now. Is it not possible to see Mavericks? Why does different machines of Apple behave differently? Somewhere it goes smoothly and somewhere like my mine. Why did not Apple release a non apple store version? Is this not a bad sign of letting the users struggle when something is being offered for free?
The reason I asked as whether we can download the .app of Mavericks is that, there are so many applications that I have downloaded web and have installed. All that works fine. Can't we do the same here? You download a copy of Mavericks installer application and upload it for me in Google drive or like online storage places which can be downloaded and used by me? Help me understand.
Thanks again.

Shared Memory Areas not accessible in background processing

Hi there
We're using Shared Memory Areas to share data between an on-line transaction and a background program. The on-line transaction collects the data, creates the Shared Memory Area and submits a background job to process it. So, after the detach_commit, it performs submit program via job_name xxxx number nnnn.
It works OK in our dev and quality systems, but does not work in our production system. The memory area is created OK, but the job cannot access it. In the background program, we get the message:
"The read lock on the instance 'ZNNNNNNN' in the client '100' of the shared objects memory area 'ZCL_XXX' cannot be set, since there is no active version of this area instance. However, the area constructor for the automatic construction of the area instance was started."
On the SMA side, we've tried seemingly every combination, even "propagate_instance".
The job seems to be running on the same application server as the SMA.
Any ideas about what we're doing wrong, anyone?
Thanks
Ged

Hello Ged,
Please remember that SHM is accessible across one App Server(AS) only.
If your SAP landscape has multiple AS's then it might pose a problem. When you're scheduling the background job, i guess that the Bgd work process is started in a different AS(load balancing ) and hence SHM is no accessible.
If this is the case, then you've no other option but to store the data persistently in DB clusters viz., INDX-type tables (EXPORT TO/IMPORT FROM DATABASE).
BR,
Suhas
Message was edited by: Suhas Saha

App-V 5.0 memory leak problem & slow program launch

App-V 5 clients with most recent updates have a memory leak problem. Windows 7 64bit workstations with 8GB of memory will be useless within couple of days because memory has run out. Terminating App-V client process will free the memory, but system starts
to consume it again after that. All hotfixes (up to 5) have been installed.
Another problem is that launching some large (locally cached) programs, for example SolidWorks, takes many minutes for a program to start. With 4.6 there wasn't any performance issues.
Any suggestions?

I saw the exact same issue with slow load times and 50% utilization by AppVClient.exe during that time.
AppV 5 first launch application performance
AppV 5 - Measuring RegistryStaging load times
The issue, specifically, is the amount of time the application takes to stage the registry is what causes the slow load and 50% CPU utilization. I've written a script that stages the registry on your behalf that we use on server startup, after all
the packages are loaded.
Original Thread on MS forums:
https://social.technet.microsoft.com/Forums/en-US/44944302-d8f3-4df1-b104-9c63345f88e0/poor-first-launch-performance-with-appv-5?forum=mdopappv

IOS app crashes on return from cameraUI - a memory allocation problem?

hey all
trying to finish my first app
when running on iOS, the app SOMETIMES crashes after returning from cameraUI (either "use"/MediaEvent.COMPLETE or "cancel"/Event.CANCEL).
when i exit some other running apps on my iPhone 3Gs (and not that many are open), the problem goes away, which makes me think this is some memory allocation problem
in that aspect, can i trust the iOS to exit inactive applications to allocate more memory for my, currently active, AIR app?
(there is no memory leak)
this is an iPhone 3Gs running os version 4.3.5
the app was made with Flash Pro 5.5 overlayed with the AIR 3.1 sdk, and deployed using the "deploy for app store" type (which should be the most bug-free)
(no crashes on Android or desktop versions)
anyone had this cameraUI problem or a similar one where an app crashes if more then some numbers of apps are open?
thanx
Saar

I don't get this. Its beyond frustrating:
we are not talking about using an uncommon phone capability, access to a phones camera is about the most basic native level of access you would be looking for in a mobile framework
we are not talking about an edge case in usage, just trying to take a simple picture consistently
we are not talking about a feature issue where it doesn't quite work the way you want, it crashes the whole app hard!
we are not talking about a hard to recreate, only happening to a few people case - it seems from what I have read the Camera integration is fundamentally broken and I have spent days researching this and only found frustration from people out there
we are not talking about an issue that does not have consequences - in several places on this forum and others people have emphasized how it is affecting their platform decisions, ability to submit apps. You even have people on this board recommending that not to use Flex Mobile and move to other platforms. Not what you want to be happening to when you are at the adoption phase of a new product.
And that is the response - on this thread and here http://forums.adobe.com/message/4125590#4125590 - we know its an issue but we don't know when it will be fixed and no proactive communication on status - only a growing body of people like me getting increasingly frustrated. What does it take for an issue to be a show stopper? priority 1? affecting customer decisions priority?
In my case I am in place where I am trying to make a platform decision and since this experience has happened I have subscribed to the live feed for this forum and as many relevant Adoble blogs, news feed etc. as I could find. I did this to get a feel for how well Adobe is supporting the mobile development on the AIR platform. Something increasingly important given recent decisions.
My perception so far is quite poor especially for a recently released product, i.e. 4.6 release. In fact the release that finally addresses performance enough to make AIR mobile development a risk free decision. You would expect Adobe to be all over the boards like this - with core developers, platform experts contributing actively. My perception, rightly or wrongly, is of a community trying to support itself without much help, or clear communication from Adobe. In fact if you look at the the articles coming out of Adobe recently its all phonegap, html5 etc. It does not fill you with confidence for the future.
To be clear - I have had a great experience with actionscript, flex etc and as a company we have developed the backend portion of our platform solely on Flex. I don't believe that we could have done it any other way and even now when I look at the alternatives for web development I feel vindicated in our decision.
However, this rant is caused by a genuine frustration and fear. I don't expect this to get a meaningful response but maybe if there are enough voices it will create an overall improvement.
Sean

[ Eclipse SLI Memory Slot Problem ]

I get my motherboard back from internal no display problem [repaired] but now I got a new problem with my Eclipse SLI board. I have a Corsair 3Gb (3x1Gb DDR3 Triple Channel) 1333 XMS3 memory, the problem is this, every time I insert 1 memory on slot 3 and check on my Memory-Z inside the BIOS, the BIOS hang, but if I continue loading and boot with Windows, Windows will load like there's nothing wrong, when I insert 1 memory on slot 5 and check the details on Memory-Z inside my BIOS, it shows details about my memory, but if I continue loading and boot with Windows, Windows crash with BSOD.
I try my memory to my brothers motherboard [Gigabyte GA-X58A-UD5] and all of my memory works good even in he's BIOS, we can check or view all of my memory details. I also try to use my brothers memory [G.Skill Ripjaws 6Gb (3x2GbDDR3 Triple Channel) 1600 ] to my Eclipse SLI and the same problem happen. Every time we insert memory on slot 5 Windows crash with BSOD but we can check details on BIOS and slot 3 hangs every time we check detail on BIOS but load Windows fine.
As part of the rules here in MSI Forum, here are my specs
Processor : Intel Core i7 920 [stock]
Memory : Corsair 3Gb (3x1Gb Triple Channel) DDR3 1333 XMS3
Video Card : Inno3D GTX460 1Gb 256Bit
Power Supply : Corsair 1000w PSU
CPU Cooler : Xigmatek Dark Knight
Regards
Neo Genesis

Quote
Probably, you can log a ticket with MSI and check on it?
how can i have a ticket?
Quote
Just a guess, but I have the feeling they don't have a like replacement available, & they don't have an upgrade board such as an E. Plus or a BB X to give you. If you like having a PCI slot, trust me, you probably wouldn't like a BB X anyway. An Eclipse Plus would be nice though.
that's also what i am thinking. they don't have extra Eclipse to replace my old one

How do I report a major memory leak problem with Firefox 3.6.10 in WinXP?

After I installed Firefox 3.6.9 on a WinXP desktop, I occasionally had minor memory leak problems, reflected by getting "out of virtual memory" messages. I upgraded to 3.6.10 when notified that it was available and that it supposedly fixed stability problems. Ever since then, whenever I use Firefox, it starts out quick as a flash, but very rapidly slows down to a crawl, and has twice brought my system to a halt. IE does not cause this, nor any other program I use, but the execution speed of all programs slows as badly as Firefox. If I knew where to get older versions, I would back up to 3.6.9 or earlier. The situation now prevents me from using Firefox much at all.

Im running windows 7, Firefox 3.6.10 and before i updated to 3.6.10 my CPU never went above 10% with Firefox open. Now it can spike well above 50% and i have nothing different from when i had 3.6.9 to now when i have 3.6.10.
There is no evidence for me to suggest one of the additions i have is causing it, its all pointing to Firefox itself and the last update.

Not working imessage!! I can not send imessage than after apple id. There are problems with Apple ?? Thanks!

Not working imessage!! Credit card and I can not send imessage than after apple id. There are problems with Apple seeverele?? Thanks!
Before the service reset function. Wait 24 hours to activate imessage.

go to the settings and turn off imessage
but that don't change the issue that you will never be able to facetime eachtoher
the appleID is really meant as the handle that identify you it was not meant to be shared
but can see that people may want to do not buy apps more then once

Sort memory area problem

Similar Messages

Maybe you are looking for