Sort picking list by storage bin or material in customizing

Hello Gurus,
     How can I sort picking list by storage bin or material in customizing?
thanks very much!

It's done at IMG - Logistics Execution -  Warehouse Management - Strategies - Define Sort Sequence for Stock Removal (Picking)

Similar Messages

  • WM: Sort Picking list items (OMLV)

    Hi,
    in customizing for WM printout (OMLV) you have the possiblity to use a sort profile and assign it to the print code.
    But for some reason the printout is not sorted by source storage bin (VLPLA) although it is set in the profile.
    Where in the standard printout (RLVSDR40) is the profile used?
    Cheers
    Mathias

    Hello Mathias,
    I have the same problem. First criterion is OK (VLTYP ascending - storage types). But second sort criterion (VLPLA descending - storage bins) is not working - when you would like to see it in SP01 print preview (in my case in Picking List). Did you solve you problem and could you send me your solution?
    Many thanks
    Ondrej

  • Picking from another storage bin

    During picking TO creation the system automatically determines the source storage bin from where the materials should be picked. Lets say the items to be picked are not there and cannot be picked. In this case the operator should be enabled to pick from another storage bin, however the system does not allow this. (This is via mobile data entry and in a bulk SU manages st. type).
    Is there a way to allow picking from another storage bin? If not, can the TO be created without any source determination? Even if I switch off picking strategy, the system expects entry of source bin at TO creation.

    Hi,
      With out a source storage bin , pick TO cannot be created currently. If at all you want a different source bin, you have to cancel the TO, block the current bin and then recreate the TO. That is an exceptional case and should be handled inside the system.
    Thanks
    Vinod.

  • Capacity control in storage bin for material

    Hello,
       I am trying to set up following scenario: I want to set the capacity of storge bin for material for example 16547. For one storage bin fit only 200 pieces of material 16547. So I set this in material master WM2 tab. Then I order 400 pieces, TR is generated, then I want to create TO in background, but it display error: Maximum quantity for storage bin will be exceeded. Then I have to create TO in foreground and confirmation 2 times.
    So my question is: is there any way to set up that TO will be created in background and confirmed one time?
    Thank you

    a TO split will not be triggered by remaining capacity, never.
    The TO split has to happen earlier, SAP is always trying to putaway the entire quantity of a single TO item into one bin. Hence you need to have many TO items.
    This is controlled by Palletization (WM2 view).
    If you get 200 on one pallet, the enter 200 in WM2 view and SAP will give you 2 TO items if you receive 400.

  • Sort Pick List

    Hello,
    I added a field to the pick list to show the item location from item master data. Now in the PDL I want to sort by this column when printing. The sort button in PLD -> Rep Area -> Sort is always greyed out.
    Do you have any idea what goes wrong?
    Thanks!

    Hi,
    Once you add a field to the list, sorting option may be restricted. This is normal.
    Thanks,
    Gordon

  • Effect of issuing Material directly from Interim Storage BIN?

    Dear Experts,
    What is effect of issuing(311) material directly from Interim storage BIN without storing to Storage BIN.
    Because i am unable to do LB11& LB12  for  both GR's(101) and TP(311) as it has directly picked from Interim Storage BIn to do
    TP(311).
    So please someone explain me the effect of the above Scenario?
    Thanks & Regards,
    Olet Malla

    You can do it but in general you should not allow picking from interim Storage Types.  For example you don't want Sales trying to pick materials sat in the PSAs, you don't want Production trying to pick from materials in 916 etc. etc.

  • Material appearing in the another Storage Bin

    Hi,
    I have maintanined  storage bin in material master (view:warehouse managment2) as "OPEN" for my material 78.59.32.1551.
    After doing 105(MIGO),for my material 78.59.32.1551,when I checked stock  by using tcode  LS24,the material is showing in the another storage bin:04-DR-01 instead of "OPEN".
    It should appear in the "OPEN". Am I right?  If no ,please correct me .
    Any solution???
    With Regards,
    Jaheer.

    Uncheck negative stock for the storage type you are picking from. IMG - LE- WM-Master Data-Define Stg Type uncheck 'Allow Negative Stock'.

  • MI21 Physical Inventory Report Sort by Storage Bin

    Hi gurus.
    I am working on INVENT, copied to ZINVENT SapScript and one of the requirements is to sort the report by Storage Bin. Currently the storage bins are fetched at print time item by item, not using an itab.
    Is there any way to sort the items by Storage Bin (MABDR-LGPBE) in the code?
    Thanks!
    Julio

    Hi Subas,
    That's the problem, that field is not included in the items itab. This field is populated at item level, item per item when print form command is sent to SapScript. It is not stored in any itab.

  • Picking List / Material issue slip

    Kindly let me know the process of printing a Picking list / Issue Slip for a material issue from a DBM Service order.

    Dear Babudhar,
    There are no standard actions delivered to print any picking lists along with DBM 6.0.
    An event call be built in (to print the list) which could be linked to Confirm event as a subsequent event. So, as soon as the order if confirmed, the new event can print the list for you.
    Hope this info helps.
    Best regards,
    Harsha

  • Creation of Mass Storage bin

    Hi,
    We need to created storage bin for warehouse. we were planning to use LSMW. We cannot use auto creation of stroage bin LS10 since the numbers are not in a proper sequence.
    However we need to add value to the field 'Sort fld pick' for every storage bin which will be used latter for sorting the storage bin in pick list.
    This field is not available when u create storage bin. This field is only avaialble when u are change mode after creating the storage bin.
    Also we cannot use the customization for define sort sequence for stock removal.
    Can anybody help me how to fix the issue.
    thanks in advance
    Regards

    Hi,
    Storage Bins creations and Sort fld stck plcm/Sort fld picking are all  master data maintenance, to maintains these you need to create LSMW or BDC. There is now option on customization etc.
    let me know if you have any more questions.
    Regards,
    Madhu

  • Picklist to show Storage bin

    Hi Folks,
    Picklist should show the storage bin from material master.
    whats the tcode to check this ?
    Thanks & Regards,
    Raju.

    Hi Raju,
             in MMR - WM 1 view storage bin is available. Do you face any problem to pick this field?
    or
    Are you looking something different ?
    what is the application type you are using for pick list - I guess its V6- Handling Unit
    Regards,
    ReazuddinMD

  • Storage Bin for Interim Storage Type 902 for GR

    Hi,
    We know that the the dynamic storage bin for goods receipt for PO is the PO number. However, when we are posting GR, system creates TR with interim storage bin as material document number.
    I looked into the movement type config. However, we can only state that whether interim bin should be cordinates or fixed bin or dynamic bin. It has no way to mention what that dynamic bin would be.
    Can you please suggest a way to change the dynamic storage bin as PO number instead of material document number.
    Thanks,
    Shekhar

    Dear Shekhar,
    Could you please check in view V_T308 (transaction code OMNF) whether the indicator "Dynamic bin material document" is set for your warehouse number and requirement type B?
    Best regards,
    Christiane
    Edited by: Christiane Schnellenbach on Apr 12, 2010 10:25 PM

  • Printing problem for picking list

    Hi friends,
    Whenever we print the picking list of material with batch number. the printing job will bring a extra page with basic form information . it's kind of wasting the paper since the extra page doen not contain any specific picking informations. This issue only happen to picking list with batch number applied material . The extra page won't be printed out once the material is not subjected to batch management.The form style should be script form.
    Please kindly advise if you have any suggestions.
    Thanks,
    LG

    Hi,
    Assuming printing job is batch job. Normally batch job executes a program (you assign program to the batch job when you configure it) while you create batch jobwhile it is running. If you want the system to check the particular information (take the information if the so and so prerequisits matches if not ignore kind of) during the program execution you can do it with the hlep of a deverloper.
    If you want to avoid unnecessary basic ifnormation it can very well be done with the layout changes in SAP script form and the program if necessary.  Make sure you dont need those information as some times it is like a legal information like we see in the company signatures which seems like basic information.

  • Storage Type and storage bin in MB26 pick list

    Hi,
    We want to print a pick list using MB26. The pick list should contain the warehouse number , storage type and storage bin. I have found that in the layout of MB26 pick list, we can pull these fields. However, the values of these fields are not getting pulled in the list.
    Can you please help me to understand if I need to do some setting/config so that warehouse number, storage type and storage bin can be pulled in the MB26 report.
    Thanks,
    Shekhar

    if it is a standard output if you go to the output type you can see what are the standard fields included in the pick list but if it is a custom one please contact your functional consultant who designed or look at the spec to see the design/mapping of fields.
    Please let me know if thhis helps.

  • Pick list sorting

    Hi All,
    I would like to sort my pick list for delivery in "Source storage Bin".
    Can anyone please help me in step by step procedure to set up this sorting.
    I maintained Processing performance data/TO split - sort profile for TO splitting - 1st sort VLPLA.
    this is not working.
    your help on this is appreciated.
    Thanks,
    Praveen

    Hi Friends,
    Actually I need to sort TO line items while printing the Transfer order and not while creating the TO. The sorting should be based on the source storage bin.
    I know these two are the options available in WM to sort TO line items
    1. Profile for sorting during TO Processing
    2. Profile for sorting during TO print processing.
    The option 1 is not in scope and now I have to do adjustments in option2.
    My current setting for option2 is:
    1st  Sort - SPOOI
    2nd Sort - LDESI
    3rd Sort - REFNR
    4th Sort - FORMI
    5th Sort - LGNUM
    6th Sort - KOBER
    7th Sort - REIHF
    8th Sort - VLTYP
    9th Sort - VLPLA
    10th Sort - MATNR
    Can anyone tell me what's the field adjustment I need to do to get the print by source storage bin.
    Thanks in advance.
    Regards,
    Praveen

Maybe you are looking for