Sort problems in solaris 10

Hi All -
When running sort with locale set to en_US.ISO8859-1, the sort works as a sort -d command. But when the locale is set to en_GB.ISO8859-1, it works fine. Is there some problem with en_US charset? I would appreciate your input and advice as what the problem may be and how I can fix it.
Thanks in advance

Different locales have different sort orders, the sort order used will be determined by the LC_COLLATE environment variable.
One example of this is given in the sort manpage;
If LC_COLLATE is set to C, sorting will be in ASCII order.
If LC_COLLATE is set to en_US, sorting is case insensitive
except when the two strings are otherwise equal and one has
an uppercase letter earlier than the other.

Similar Messages

Content Server 6.0 Installation problem on Solaris

When I installed Content_Server_6.0_SP1_solaris_oracle on Solaris 10 ,I get the following error in log file.
dbg Bundled JRE is not binary compatible with host OS/Arch or it is corrupt. Testing bundled JRE failed.
How can I resolve it
please help me.
Regards
Sandeep

If I installed any installer for sparc Machine on x86.is there any problem.My Solaris machine is x86.
thanx.
Regards
Sandeep.

Focus Problem on Solaris with jdk 1.3.1

Hi all,
We are having a focus problem on Solaris. The same code works fine on Windows without any problem.
I am sending the test code and run steps below which you can compile and repeat the problem.
NOTE: When we put a comment on the line "f1.requestFocus();" in TestFocus.java it works OK.
Run Steps :
1. Run TestFocus.class
2. A JFrame appears with 2 text field and a button
3. Try to write something on the text fields. It works OK.
4. Click the button to open a new JFrame
5. A new JFrame opens with a single text field and a button.
6. Click the button to close the second frame
7. You are now on the main JFrame
8. Try to write something on the text fields. It works OK.
9. Repeat the steps 4-7
10. Try to write something on the text fields. You are able to focus and write on the first field. BUT you cannot select or write the second Field!
JAVA SOURCE FILES :
PenHesapListener.java :
public interface PenHesapListener extends java.util.EventListener {
void tamam_actionPerformed(java.util.EventObject newEvent);
void iptal_actionPerformed(java.util.EventObject newEvent);
------PenHesapLisEventMulticaster.java----------------------------------
public class PenHesapLisEventMulticaster extends java.awt.AWTEventMulticaster implements PenHesapListener {
* Constructor to support multicast events.
* @param a java.util.EventListener
* @param b java.util.EventListener
protected PenHesapLisEventMulticaster(java.util.EventListener a, java.util.EventListener b) {
     super(a, b);
* Add new listener to support multicast events.
* @return muhasebe.HesappenListener
* @param a muhasebe.HesappenListener
* @param b muhasebe.HesappenListener
public static PenHesapListener add(PenHesapListener a, PenHesapListener b) {
     return (PenHesapListener)addInternal(a, b);
* Add new listener to support multicast events.
* @return java.util.EventListener
* @param a java.util.EventListener
* @param b java.util.EventListener
protected static java.util.EventListener addInternal(java.util.EventListener a, java.util.EventListener b) {
     if (a == null) return b;
     if (b == null) return a;
     return new PenHesapLisEventMulticaster(a, b);
* @return java.util.EventListener
* @param oldl muhasebe.HesappenListener
protected java.util.EventListener remove(PenHesapListener oldl) {
     if (oldl == a) return b;
     if (oldl == b) return a;
     java.util.EventListener a2 = removeInternal(a, oldl);
     java.util.EventListener b2 = removeInternal(b, oldl);
     if (a2 == a && b2 == b)
          return this;
     return addInternal(a2, b2);
* Remove listener to support multicast events.
* @return muhasebe.HesappenListener
* @param l muhasebe.HesappenListener
* @param oldl muhasebe.HesappenListener
public static PenHesapListener remove(PenHesapListener l, PenHesapListener oldl) {
     if (l == oldl || l == null)
          return null;
     if(l instanceof PenHesapLisEventMulticaster)
          return (PenHesapListener)((PenHesapLisEventMulticaster) l).remove(oldl);
     return l;
public void tamam_actionPerformed(java.util.EventObject newEvent) {
     ((PenHesapListener)a).tamam_actionPerformed(newEvent);
     ((PenHesapListener)b).tamam_actionPerformed(newEvent);
public void iptal_actionPerformed(java.util.EventObject newEvent) {
     ((PenHesapListener)a).iptal_actionPerformed(newEvent);
     ((PenHesapListener)b).iptal_actionPerformed(newEvent);
---------TestFocus2.java-----------------------------------------
import javax.swing.*;
import javax.swing.JOptionPane;
import java.awt.event.WindowAdapter;
import java.awt.event.KeyListener;
import java.awt.event.KeyAdapter;
import java.awt.event.KeyEvent;
import java.awt.event.ActionEvent;
import java.awt.event.WindowEvent;
import java.awt.event.ActionListener;
import java.util.ArrayList;
import java.util.StringTokenizer;
import java.text.SimpleDateFormat;
import java.awt.Dimension;
import java.awt.Toolkit;
import java.awt.Color;
import java.util.Locale;
import java.util.ResourceBundle;
public class TestFocus2 extends JFrame implements ActionListener
     protected transient PenHesapListener PenhListener = null ;
     JTextField f10 = null;
     JButton b10= null ;
     JTextField f1 = new JTextField() ;
     JButton b1 = new JButton() ;
     JFrame f20 = null;
     public TestFocus2()
          getContentPane().setLayout(new BoxLayout(getContentPane(), BoxLayout.Y_AXIS));
          getContentPane().add(f1);
          getContentPane().add(b1);
          pack();
          setVisible(true);
          b1.addActionListener(this);
     public void actionPerformed(ActionEvent e)
          if(e.getSource() == b1)
               fireTamam_actionPerformed(e);
     public void addPenHesapListener(PenHesapListener newListener)
          PenhListener = PenHesapLisEventMulticaster.add(PenhListener, newListener);
          return;
     protected void fireTamam_actionPerformed(java.util.EventObject newEvent) {
          PenhListener.tamam_actionPerformed(newEvent);
          this.setVisible(false);
     protected void fireiptal_actionPerformed(java.util.EventObject newEvent) {
          PenhListener.iptal_actionPerformed(newEvent);
     public static void main(String x[])
          TestFocus2 gen01 = new TestFocus2();
--------TestFocus.java-----------------------------------
import javax.swing.*;
import javax.swing.JOptionPane;
import java.awt.event.WindowAdapter;
import java.awt.event.KeyListener;
import java.awt.event.KeyAdapter;
import java.awt.event.KeyEvent;
import java.awt.event.ActionEvent;
import java.awt.event.WindowEvent;
import java.awt.event.ActionListener;
import java.util.ArrayList;
import java.util.StringTokenizer;
import java.text.SimpleDateFormat;
import java.awt.Dimension;
import java.awt.Toolkit;
import java.awt.Color;
import java.util.Locale;
import java.util.ResourceBundle;
import java.awt.Container;
public class TestFocus extends JFrame implements ActionListener
     PenKreKart aPenKreKart = null ;
     Container ctn = null;
     JTextField f10 = null;
     JButton b10= null ;
     JTextField f1 = new JTextField() ;
     JTextField f2 = new JTextField() ;
     JButton b1 = new JButton() ;
     JFrame f20 = null;
     public TestFocus()
          //aPenKreKart = new PenKreKart(true);
          //aPenKreKart.aTemelPencere.setVisible(false);
          getContentPane().setLayout(new BoxLayout(getContentPane(), BoxLayout.Y_AXIS));
          getContentPane().add(f1);
          getContentPane().add(f2);
          getContentPane().add(b1);
          pack();
          setVisible(true);
          b1.addActionListener(this);
     public void actionPerformed(ActionEvent e)
          if(e.getSource() == b1)
               pencere_islemi();
     // pencere koyma k?sm? .. begin
     public void pencere_islemi() {
          ctn = this;
          ctn.setEnabled(false);
          TestFocus2 fpen = new TestFocus2();
          //aPenKreKart.aTemelPencere.setVisible(true); //buras?
          //aPenKreKart.aTemelPencere.addPenHesapListener(new PenHesapListener() {
          fpen.addPenHesapListener(new PenHesapListener() {
                    // metod      tamam_actionPerformed begin...
                    public void tamam_actionPerformed(java.util.EventObject newEvent) {
                         ctn.setEnabled(true);
                         ctn.requestFocus();
                         // Problem is when we comment the below line it works .....
                         f1.requestFocus();
                         System.out.println("tamam");
                    // metod      tamam_actionPerformed end...
                    // metod      iptal_actionPerformed begin...
                    public void iptal_actionPerformed(java.util.EventObject newEvent) {
                         ctn.setEnabled(true);
                         ctn.requestFocus();
                         System.out.println("iptal");
                    // metod      iptal_actionPerformed begin...
     // pencere koyma k?sm? .. end
     public static void main(String x[])
          TestFocus gen01 = new TestFocus();

Hi all,
We are having a focus problem on Solaris. The same code works fine on Windows without any problem.
I am sending the test code and run steps below which you can compile and repeat the problem.
NOTE: When we put a comment on the line "f1.requestFocus();" in TestFocus.java it works OK.
Run Steps :
1. Run TestFocus.class
2. A JFrame appears with 2 text field and a button
3. Try to write something on the text fields. It works OK.
4. Click the button to open a new JFrame
5. A new JFrame opens with a single text field and a button.
6. Click the button to close the second frame
7. You are now on the main JFrame
8. Try to write something on the text fields. It works OK.
9. Repeat the steps 4-7
10. Try to write something on the text fields. You are able to focus and write on the first field. BUT you cannot select or write the second Field!
JAVA SOURCE FILES :
PenHesapListener.java :
public interface PenHesapListener extends java.util.EventListener {
void tamam_actionPerformed(java.util.EventObject newEvent);
void iptal_actionPerformed(java.util.EventObject newEvent);
------PenHesapLisEventMulticaster.java----------------------------------
public class PenHesapLisEventMulticaster extends java.awt.AWTEventMulticaster implements PenHesapListener {
* Constructor to support multicast events.
* @param a java.util.EventListener
* @param b java.util.EventListener
protected PenHesapLisEventMulticaster(java.util.EventListener a, java.util.EventListener b) {
     super(a, b);
* Add new listener to support multicast events.
* @return muhasebe.HesappenListener
* @param a muhasebe.HesappenListener
* @param b muhasebe.HesappenListener
public static PenHesapListener add(PenHesapListener a, PenHesapListener b) {
     return (PenHesapListener)addInternal(a, b);
* Add new listener to support multicast events.
* @return java.util.EventListener
* @param a java.util.EventListener
* @param b java.util.EventListener
protected static java.util.EventListener addInternal(java.util.EventListener a, java.util.EventListener b) {
     if (a == null) return b;
     if (b == null) return a;
     return new PenHesapLisEventMulticaster(a, b);
* @return java.util.EventListener
* @param oldl muhasebe.HesappenListener
protected java.util.EventListener remove(PenHesapListener oldl) {
     if (oldl == a) return b;
     if (oldl == b) return a;
     java.util.EventListener a2 = removeInternal(a, oldl);
     java.util.EventListener b2 = removeInternal(b, oldl);
     if (a2 == a && b2 == b)
          return this;
     return addInternal(a2, b2);
* Remove listener to support multicast events.
* @return muhasebe.HesappenListener
* @param l muhasebe.HesappenListener
* @param oldl muhasebe.HesappenListener
public static PenHesapListener remove(PenHesapListener l, PenHesapListener oldl) {
     if (l == oldl || l == null)
          return null;
     if(l instanceof PenHesapLisEventMulticaster)
          return (PenHesapListener)((PenHesapLisEventMulticaster) l).remove(oldl);
     return l;
public void tamam_actionPerformed(java.util.EventObject newEvent) {
     ((PenHesapListener)a).tamam_actionPerformed(newEvent);
     ((PenHesapListener)b).tamam_actionPerformed(newEvent);
public void iptal_actionPerformed(java.util.EventObject newEvent) {
     ((PenHesapListener)a).iptal_actionPerformed(newEvent);
     ((PenHesapListener)b).iptal_actionPerformed(newEvent);
---------TestFocus2.java-----------------------------------------
import javax.swing.*;
import javax.swing.JOptionPane;
import java.awt.event.WindowAdapter;
import java.awt.event.KeyListener;
import java.awt.event.KeyAdapter;
import java.awt.event.KeyEvent;
import java.awt.event.ActionEvent;
import java.awt.event.WindowEvent;
import java.awt.event.ActionListener;
import java.util.ArrayList;
import java.util.StringTokenizer;
import java.text.SimpleDateFormat;
import java.awt.Dimension;
import java.awt.Toolkit;
import java.awt.Color;
import java.util.Locale;
import java.util.ResourceBundle;
public class TestFocus2 extends JFrame implements ActionListener
     protected transient PenHesapListener PenhListener = null ;
     JTextField f10 = null;
     JButton b10= null ;
     JTextField f1 = new JTextField() ;
     JButton b1 = new JButton() ;
     JFrame f20 = null;
     public TestFocus2()
          getContentPane().setLayout(new BoxLayout(getContentPane(), BoxLayout.Y_AXIS));
          getContentPane().add(f1);
          getContentPane().add(b1);
          pack();
          setVisible(true);
          b1.addActionListener(this);
     public void actionPerformed(ActionEvent e)
          if(e.getSource() == b1)
               fireTamam_actionPerformed(e);
     public void addPenHesapListener(PenHesapListener newListener)
          PenhListener = PenHesapLisEventMulticaster.add(PenhListener, newListener);
          return;
     protected void fireTamam_actionPerformed(java.util.EventObject newEvent) {
          PenhListener.tamam_actionPerformed(newEvent);
          this.setVisible(false);
     protected void fireiptal_actionPerformed(java.util.EventObject newEvent) {
          PenhListener.iptal_actionPerformed(newEvent);
     public static void main(String x[])
          TestFocus2 gen01 = new TestFocus2();
--------TestFocus.java-----------------------------------
import javax.swing.*;
import javax.swing.JOptionPane;
import java.awt.event.WindowAdapter;
import java.awt.event.KeyListener;
import java.awt.event.KeyAdapter;
import java.awt.event.KeyEvent;
import java.awt.event.ActionEvent;
import java.awt.event.WindowEvent;
import java.awt.event.ActionListener;
import java.util.ArrayList;
import java.util.StringTokenizer;
import java.text.SimpleDateFormat;
import java.awt.Dimension;
import java.awt.Toolkit;
import java.awt.Color;
import java.util.Locale;
import java.util.ResourceBundle;
import java.awt.Container;
public class TestFocus extends JFrame implements ActionListener
     PenKreKart aPenKreKart = null ;
     Container ctn = null;
     JTextField f10 = null;
     JButton b10= null ;
     JTextField f1 = new JTextField() ;
     JTextField f2 = new JTextField() ;
     JButton b1 = new JButton() ;
     JFrame f20 = null;
     public TestFocus()
          //aPenKreKart = new PenKreKart(true);
          //aPenKreKart.aTemelPencere.setVisible(false);
          getContentPane().setLayout(new BoxLayout(getContentPane(), BoxLayout.Y_AXIS));
          getContentPane().add(f1);
          getContentPane().add(f2);
          getContentPane().add(b1);
          pack();
          setVisible(true);
          b1.addActionListener(this);
     public void actionPerformed(ActionEvent e)
          if(e.getSource() == b1)
               pencere_islemi();
     // pencere koyma k?sm? .. begin
     public void pencere_islemi() {
          ctn = this;
          ctn.setEnabled(false);
          TestFocus2 fpen = new TestFocus2();
          //aPenKreKart.aTemelPencere.setVisible(true); //buras?
          //aPenKreKart.aTemelPencere.addPenHesapListener(new PenHesapListener() {
          fpen.addPenHesapListener(new PenHesapListener() {
                    // metod      tamam_actionPerformed begin...
                    public void tamam_actionPerformed(java.util.EventObject newEvent) {
                         ctn.setEnabled(true);
                         ctn.requestFocus();
                         // Problem is when we comment the below line it works .....
                         f1.requestFocus();
                         System.out.println("tamam");
                    // metod      tamam_actionPerformed end...
                    // metod      iptal_actionPerformed begin...
                    public void iptal_actionPerformed(java.util.EventObject newEvent) {
                         ctn.setEnabled(true);
                         ctn.requestFocus();
                         System.out.println("iptal");
                    // metod      iptal_actionPerformed begin...
     // pencere koyma k?sm? .. end
     public static void main(String x[])
          TestFocus gen01 = new TestFocus();

Metainit/striping problem on Solaris 9

We are trying to deploy the Apple XServe RAIDS to customers running Solaris 9. The issue is that Solaris 9 will not recognize a device/LUN that is > 2TB. (No problem with Solaris 10) In trying to solve this problem, we sliced a 7 disk (4.09 TB) RAID into 3 slices. This presents three 1.36TB disks to the Solaris system. Basically, we have 6 disks being presented across both controllers to Solaris. They are direct connected from the XServe to a dual port QLogic HBA. The problem comes in when you try to create a stripe/concatenation across the logical devices being presented. (The disks are being presented on C4 and C5)
Results from a format AFTER I split both 7 disk RAID5s into 3 slices.
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>
/pci@1c,600000/scsi@2/sd@0,0
1. c1t1d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>
/pci@1c,600000/scsi@2/sd@1,0
2. c1t2d0 <SEAGATE-ST373307LSUN72G-0507 cyl 14087 alt 2 hd 24 sec 424>
/pci@1c,600000/scsi@2/sd@2,0
3. c1t3d0 <SEAGATE-ST373307LSUN72G-0507 cyl 14087 alt 2 hd 24 sec 424>
/pci@1c,600000/scsi@2/sd@3,0
4. c4t600039300001F461d0 <APPLE Xserve RAID 1.51 aea84000>
/pci@1e,600000/SUNW,qlc@3/fp@0,0/ssd@w600039300001f461,0
5. c4t600039300001F461d1 <APPLE Xserve RAID 1.51 aea84000>
/pci@1e,600000/SUNW,qlc@3/fp@0,0/ssd@w600039300001f461,1
6. c4t600039300001F461d2 <APPLE Xserve RAID 1.51 aea84000>
/pci@1e,600000/SUNW,qlc@3/fp@0,0/ssd@w600039300001f461,2
7. c5t600039300001F2ECd0 <APPLE Xserve RAID 1.51 aea84000>
/pci@1e,600000/SUNW,qlc@3,1/fp@0,0/ssd@w600039300001f2ec,0
8. c5t600039300001F2ECd1 <APPLE Xserve RAID 1.51 aea84000>
/pci@1e,600000/SUNW,qlc@3,1/fp@0,0/ssd@w600039300001f2ec,1
9. c5t600039300001F2ECd2 <APPLE Xserve RAID 1.51 aea84000>
/pci@1e,600000/SUNW,qlc@3,1/fp@0,0/ssd@w600039300001f2ec,2
Specify disk (enter its number):
Results of the cfgadm command. You will see there three logical devices presented to each controller. Six disks.
cfgadm -al -o showFCPdev
Ap_Id Type Receptacle Occupant Condition
c4 fc-private connected configured unknown
c4::600039300001f461,0 disk connected configured unknown
c4::600039300001f461,1 disk connected configured unknown
c4::600039300001f461,2 disk connected configured unknown
c5 fc-private connected configured unknown
c5::600039300001f2ec,0 disk connected configured unknown
c5::600039300001f2ec,1 disk connected configured unknown
c5::600039300001f2ec,2 disk connected configured unknown
Trying to initialize a 6 device stripe via Solaris Volume Manager (AKA disksuite)
metainit -f d77 6 1 c4t600039300001F461d0s0 1 c4t600039300001F461d1s0 1 c4t600039300001F461d2s0 1 c5t600039300001F2ECd0s0 1 c5t600039300001F2ECd1s0 1 c5t600039300001F2ECd2s0
I receive the following error:
metainit: hostname: c4t600039300001F461d1s0: overlaps with device in d77
I tried to do a work around where I create three striped devices then concatenate them:
Creating the first 2 device stripe across controllers c4 and c5 (1 device each)
metainit -f d77 2 1 c4t600039300001F461d0s0 1 c5t600039300001F2ECd0s0
I was able to create the first metadevice d77 using one logical LUN from each controller.
When I tried to create a second metadevice across the controllers: (Using d1 from each controller)
metainit -f d78 2 1 c4t600039300001F461d1s0 1 c5t600039300001F2ECd1s0
metainit: hostneme: c4t600039300001F461d1s0: overlaps with device in d77
I received the same error.
In doing some reaearch, it seems the problem is due to a problem with the disk duplication process, disk device IDs stored on the disks are not unique. I was curious if this is the problem that Apple presents the split disks with the SAME diskid? Has anybody else successfully created stripes (due to a LUN size limit) across the disk successfully on a Solaris system?

I contacted Sun and here is an explination from them. I also noticed when I queried the Xserver RAIDS, there were no serial numbers.
Solaris 9 can support a 16Tb filesystem, but there is a scsi limitation on the device of 2Tb. So you are stuck with striping together several smaller devices if you want a single filesystem above 2Tb.
The problem you are having when metainit reports an overlap comes from the way Solaris Volume Manager identifies devices. The portion of the scsi inquiry that is returned is always unique when Sun firmware is involved, but in your case is not unique.
You may be able to make use of the appended infodoc to avoid this problem. I see no evidence of our having tested this with your particular scenario, but it has been successful in similar cases.
You might also inquire of whoever supports your storage device whether a mode is supported whereby the device's inquiry strings can be made unique.
Here is the steps he wanted me to take and the results. I still can not get the Xserve RAIDS to generate a unique device id:
Step 1
Determine the vendor and product strings. You can run these commands:
# netstat -k | grep -i vendor
# netstat -k | grep -i product
netstat -k | grep -i vendor
Soft Errors 2 Hard Errors 0 Transport Errors 0 Vendor APPLE
Soft Errors 2 Hard Errors 0 Transport Errors 0 Vendor APPLE
Soft Errors 2 Hard Errors 0 Transport Errors 0 Vendor APPLE
Soft Errors 2 Hard Errors 0 Transport Errors 0 Vendor APPLE
Soft Errors 2 Hard Errors 0 Transport Errors 0 Vendor APPLE
grep -i product
Product Xserve RAID Revision Revision 1.51 Serial No Size 1500294152192 Media Error 0 Device Not Ready 0
Product Xserve RAID Revision Revision 1.51 Serial No Size 1500294152192 Media Error 0 Device Not Ready 0
Product Xserve RAID Revision Revision 1.51 Serial No Size 1500294152192 Media Error 0 Device Not Ready 0
Product Xserve RAID Revision Revision 1.51 Serial No Size 1500294152192 Media Error 0 Device Not Ready 0
Product Xserve RAID Revision Revision 1.51 Serial No Size 1500294152192 Media Error 0 Device Not Ready 0
or you can run
# format -e
then select scsi, then inquiry.
scsi> inq
Inquiry:
00 00 05 12 5b 00 00 02 41 50 50 4c 45 20 20 20 ....[...APPLE
58 73 65 72 76 65 20 52 41 49 44 20 20 20 20 20 Xserve RAID
31 2e 35 31 63 00 00 00 00 00 00 00 00 00 00 00 1.51c...........
00 00 00 00 00 00 00 00 00 00 0d 40 0d a0 0e 20 ...........@...
0d 80 09 00 0a 00 00 20 00 00 00 20 20 20 20 20 ....... ...
20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
Vendor: APPLE
Product: Xserve RAID
Revision: 1.51
Removable media: no
Device type: 0
ISO version: 0
ECMA version: 0
ANSI version: 5
Async event notification: no
Terminate i/o process msg: no
Response data format: 2
Additional length: 91
Relative addressing: no
32 bit transfers: no
16 bit transfers: no
Synchronous transfers: no
Linked commands: no
Command queueing: yes
Soft reset option: no
Step 2
Add an entry in the file '/kernel/drv/sd.conf'.
sd-config-list=
"APPLE Xserve RAID ", "AppleRAID";
AppleRAID=1,0x8,0,0,0,0,0;
Step 3 Reboot.
Step 4 Check with SUNWexplo.
[email protected]:[/opt/SUNWexplo/bin] (8)# ./diskinfo.sparc
/dev/rdsk/c0t0d0s2: Device busy
AVAILABLE SCSI DEVICES:
Location Vendor Product Rev Serial #
c1t0d0 COMPAQ BD036863AC HPB5 B2FT4HMM
c1t1d0 SEAGATE ST336607LSUN36G 0507 0349A66VKQ
c1t2d0 SEAGATE ST373307LSUN72G 0507 0417B7C9ZC
c1t3d0 SEAGATE ST373307LSUN72G 0507 0425B7LV5Q
c4t600039300001F461d0 APPLE Xserve RAID 151 c
c4t600039300001F461d1 APPLE Xserve RAID 151 c
c4t600039300001F461d2 APPLE Xserve RAID 151 c
c5t600039300001F2ECd0 APPLE Xserve RAID 151 c
c5t600039300001F2ECd1 APPLE Xserve RAID 151 c
As you will notice, there are no serial numbers in this command or netstat -k | grep -i product commands.

Sorting Problem in FND_MENU_ENTRIES_TL Table

Hi,
FND_MENU_ENTRIES_TL Table storing the record FND_MENU_ENTRIES_TL_N1(MENU_ID,PROMPT,LANGUAGE) wise in R12. But whereas in 11i, records stored FND_MENU_ENTRIES_TL_U1(MENU_ID,ENTRY_SEQUENCE,LANGUAGE).
I am confused, whether i need to recreate the index in R12, so the records will get store MENU_ID,ENTRY_SEQUENCE,LANGUAGE wise.
Could any one please suggest me how to resolve this problem.
Thanks,
Praba T

815667 wrote:
Hi,
FND_MENU_ENTRIES_TL Table storing the record FND_MENU_ENTRIES_TL_N1(MENU_ID,PROMPT,LANGUAGE) wise in R12. But whereas in 11i, records stored FND_MENU_ENTRIES_TL_U1(MENU_ID,ENTRY_SEQUENCE,LANGUAGE).
I am confused, whether i need to recreate the index in R12, so the records will get store MENU_ID,ENTRY_SEQUENCE,LANGUAGE wise.
Could any one please suggest me how to resolve this problem.
Thanks,
Praba TPl do not abuse the forums by cross-posting in multiple forums
Sorting Problem in FND_MENU_ENTRIES_TL Table
Sorting Problem in FND_MENU_ENTRIES_TL Table
Your issue is related to EBS, not to database upgrades (which is the topic of this forum)
Srini

Sorting problems in Grid View

Hi, I'm having a bit of a sorting problem when it comes to an artist with name variations. The example I'm going to use is DJ Tiesto.
There are album I have where he is credited as DJ Tiesto, and others where he is simply Tiesto.
In the end, I'd like these albums sorted chronologically under one name (say DJ Tiesto), while still preserving and showing the proper artist name for each album. I have it set to sort by "Album by Year", which is working fine.
The major problem I am having is that I can't get it to display properly across all iTunes viewing methods: List mode, Grid mode, and Coverflow.
I've tried leaving the Artist field alone, and changing the Sort Artist field to "DJ Tiesto" for all songs, and that almost works:
-List mode groups them all under "DJ Tiesto", while showing each albums Artist as the correct artist name.
-Grid mode sorted by Album groups them all under "DJ Tiesto", while showing each albums Artist as the correct artist name.
-Coverflow sorts them all in chronological order, while showing each albums Artist as the correct artist name.
Problem is, Grid mode sorted by ARTIST creates two separate artists! Some for DJ Tiesto and some for Tiesto!
To correct this I tried changing the Album Artist field for all songs to "DJ Tiesto", which solved that problem but created a bunch of new ones:
-List mode is still correctly grouping them under "DJ Tiesto", while showing each albums Artist as the correct artist name.
-Grid mode sorted by Album is still correctly grouping them under "DJ Tiesto", *however now it is not displaying the correct Artist name for each album!*
-Grid mode sorted by Artist is now grouping them all under "DJ Tiesto", *however it is not displaying the correct Artist name for each album!*
-Coverflow is sorting them in correct chronological order, *however it as well is not displaying the correct Artist name for each album!*
Using the Album Artist tag has created more problems that it has solved! Is there anyone who knows a way to achieve what I am trying to do? I have tried seemingly every option I can and have still not found a way to do this!!
Thanks!

My own method of working involves renaming the files upon import to:
i "shotdate_sequencenumber"
Files are therefore typically named
b 2007-11-25_001
etc.
This way, sorting by Filename automatically sorts by Date by default. And it wouldn't even matter if you added a descriptive text in between the date and number (
b 2007-11-25_Scotland_001

Rsh disconnect problems in Solaris 10

My company uses rsh to transmit data to proprietary cards, from Ultra 25's running Solaris 10. We're experiencing random timeouts. The error is rsh connection timeout.
We never had this problem on Solaris 8 or Solaris 7.
Has anyone run across this before? It's to random to run snoop on. Thanks Mark

type passwd mgcusr as root. then you'll need to type new password for that user.

Sorting problem in standard vendor search help

Hi all,
I'm enhancing the vendor search help.
I found that there is a sorting problem in the original standard search help.
The 1st time to search vendor in the search help returns a correct list, then I just sort the vendor in ascending order. This time the column name of the hit list changes and mismatch the actual values.
Any one faced this problem before?
What's wrong are there ?
Thanks.

Thanks Peluka.
But even I don't enhance the vendor search help, I still found that the original standard version has this problem after sorting.
Is that the program bug?
Have anyone encountered this problem before?

Problems with Solaris 11 11/11

Hi,
I need your help because I have problems with Solaris 11 11/11 installed in a Dell Latitude E4310.
Here, there are the problems:
1- No it power off with shutdown or init 5 or init 0 only work well the reboot.
2- It can not connect to the wifi with wpa, no receive ip by dhcp, the driver of the card is "iwp"
Thanks.
Jorge
Edited by: jdangelo on Nov 16, 2011 1:49 PM
Edited by: jdangelo on Nov 17, 2011 2:51 PM

Here is the info of my laptop;
Manufacture name:Dell Inc.
Manufacture model:Latitude E4310
64 Bit:True
OS version:SunOS solaris 5.11 11.0 i86pc i386 i86pc
CPU Type:Intel(R) Core(TM) i5 CPU M 560 @ 2.67GHz
CPU Number:1
Number Of Cores Per Processor:2
Number Of Threads Per Processor:4
Bios/Firmware Maker:Dell Inc. Version:A05 Release Date:11/20/2010
prtconf -pv:
System Configuration: Oracle Corporation i86pc
Memory size: 3958 Megabytes
System Peripherals (PROM Nodes):
Node 0x000001
bios-boot-device: '80'
stdout: 00000000
name: 'i86pc'
Node 0x000002
existing: 00c21000.00000000.02bc6001.00000000
name: 'ramdisk'
Node 0x000003
acpi-namespace: '\_SB_.PCI0'
compatible: 'pciex_root_complex'
device_type: 'pciex'
reg: 00000000.00000000.00000000.00000000.00000000
#size-cells: 00000002
#address-cells: 00000003
name: 'pci'
Node 0x000004
reg: 00000000.00000000.00000000.00000000.00000000
compatible: 'pci8086,44.1028.410.2' + 'pci8086,44.1028.410' + 'pci1028,410' + 'pci8086,44.2' + 'pci8086,44' + 'pciclass,060000' + 'pciclass,0600'
model: 'Host bridge'
power-consumption: 00000001.00000001
fast-back-to-back:
devsel-speed: 00000000
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '0'
class-code: 00060000
revision-id: 00000002
vendor-id: 00008086
device-id: 00000044
name: 'pci1028,410'
Node 0x000005
acpi-namespace: '\_SB_.PCI0.VID_'
assigned-addresses: 83001010.00000000.f0000000.00000000.00400000.c3001018.00000000.e0000000.00000000.10000000.81001020.00000000.000060b0.00000000.00000008.a1001000.00000000.000003b0.00000000.0000000c.a1001000.00000000.000003c0.00000000.00000020.a2001000.00000000.000a0000.00000000.00020000
reg: 00001000.00000000.00000000.00000000.00000000.03001010.00000000.00000000.00000000.00400000.43001018.00000000.00000000.00000000.10000000.01001020.00000000.00000000.00000000.00000008.a1001000.00000000.000003b0.00000000.0000000c.a1001000.00000000.000003c0.00000000.00000020.a2001000.00000000.000a0000.00000000.00020000
compatible: 'pci8086,46.1028.410.2' + 'pci8086,46.1028.410' + 'pci1028,410' + 'pci8086,46.2' + 'pci8086,46' + 'pciclass,030000' + 'pciclass,0300'
model: 'VGA compatible controller'
power-consumption: 00000001.00000001
fast-back-to-back:
devsel-speed: 00000000
interrupts: 00000001
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
device_type: 'display'
unit-address: '2'
class-code: 00030000
revision-id: 00000002
vendor-id: 00008086
device-id: 00000046
name: 'display'
Node 0x000006
acpi-namespace: '\_SB_.PCI0.GLAN'
assigned-addresses: 8200c810.00000000.f5400000.00000000.00020000.8200c814.00000000.f5480000.00000000.00001000.8100c818.00000000.00006040.00000000.00000020
reg: 0000c800.00000000.00000000.00000000.00000000.0200c810.00000000.00000000.00000000.00020000.0200c814.00000000.00000000.00000000.00001000.0100c818.00000000.00000000.00000000.00000020
compatible: 'pci8086,10ea.1028.410.5' + 'pci8086,10ea.1028.410' + 'pci1028,410' + 'pci8086,10ea.5' + 'pci8086,10ea' + 'pciclass,020000' + 'pciclass,0200'
model: 'Ethernet controller'
power-consumption: 00000001.00000001
devsel-speed: 00000000
interrupts: 00000001
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '19'
class-code: 00020000
revision-id: 00000005
vendor-id: 00008086
device-id: 000010ea
name: 'pci1028,410'
Node 0x000007
acpi-namespace: '\_SB_.PCI0.EHC2'
assigned-addresses: 8200d010.00000000.f5470000.00000000.00000400
reg: 0000d000.00000000.00000000.00000000.00000000.0200d010.00000000.00000000.00000000.00000400
compatible: 'pci8086,3b3c.1028.410.5' + 'pci8086,3b3c.1028.410' + 'pci1028,410' + 'pci8086,3b3c.5' + 'pci8086,3b3c' + 'pciclass,0c0320' + 'pciclass,0c03'
model: 'Universal Serial Bus EHCI compliant'
power-consumption: 00000001.00000001
fast-back-to-back:
devsel-speed: 00000001
interrupts: 00000001
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '1a'
class-code: 000c0320
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b3c
name: 'pci1028,410'
Node 0x000008
acpi-namespace: '\_SB_.PCI0.HDEF'
assigned-addresses: 8300d810.00000000.f5460000.00000000.00004000
reg: 0000d800.00000000.00000000.00000000.00000000.0300d810.00000000.00000000.00000000.00004000
compatible: 'pciex8086,3b57.1028.410.5' + 'pciex8086,3b57.1028.410' + 'pciex8086,3b57.5' + 'pciex8086,3b57' + 'pciexclass,040300' + 'pciexclass,0403' + 'pci8086,3b57.1028.410.5' + 'pci8086,3b57.1028.410' + 'pci1028,410' + 'pci8086,3b57.5' + 'pci8086,3b57' + 'pciclass,040300' + 'pciclass,0403'
model: 'Mixed Mode device'
power-consumption: 00000001.00000001
devsel-speed: 00000000
interrupts: 00000001
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '1b'
class-code: 00040300
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b57
name: 'pci1028,410'
Node 0x000009
acpi-namespace: '\_SB_.PCI0.RP01'
slot-names: 00000001.746f6c53.00003333
reg: 0000e000.00000000.00000000.00000000.00000000
compatible: 'pciex8086,3b42.5' + 'pciex8086,3b42' + 'pciexclass,060400' + 'pciexclass,0604' + 'pci8086,3b42.5' + 'pci8086,3b42' + 'pciclass,060400' + 'pciclass,0604'
model: 'PCI-PCI bridge'
ranges: 81000000.00000000.00005000.81000000.00000000.00005000.00000000.00001000.82000000.00000000.f4000000.82000000.00000000.f4000000.00000000.01400000
bus-range: 00000001.00000001
#size-cells: 00000002
#address-cells: 00000003
device_type: 'pciex'
power-consumption: 00000001.00000001
physical-slot#: 00000000
devsel-speed: 00000000
interrupts: 00000001
unit-address: '1c'
class-code: 00060400
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b42
hotplug-capable:
pci-hotplug-type: 00000001
name: 'pci8086,3b42'
Node 0x00000a
acpi-namespace: '\_SB_.PCI0.RP02'
slot-names: 00000001.746f6c53.00003433
reg: 0000e100.00000000.00000000.00000000.00000000
compatible: 'pciex8086,3b44.5' + 'pciex8086,3b44' + 'pciexclass,060400' + 'pciexclass,0604' + 'pci8086,3b44.5' + 'pci8086,3b44' + 'pciclass,060400' + 'pciclass,0604'
model: 'PCI-PCI bridge'
ranges: 81000000.00000000.00004000.81000000.00000000.00004000.00000000.00001000.82000000.00000000.f2c00000.82000000.00000000.f2c00000.00000000.01400000
bus-range: 00000002.00000002
#size-cells: 00000002
#address-cells: 00000003
device_type: 'pciex'
power-consumption: 00000001.00000001
physical-slot#: 00000001
devsel-speed: 00000000
interrupts: 00000002
unit-address: '1c,1'
class-code: 00060400
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b44
hotplug-capable:
pci-hotplug-type: 00000001
name: 'pci8086,3b44'
Node 0x000013
acpi-namespace: '\_SB_.PCI0.RP02.PXSX'
assigned-addresses: 83020010.00000000.f2c00000.00000000.00002000
reg: 00020000.00000000.00000000.00000000.00000000.03020010.00000000.00000000.00000000.00002000
compatible: 'pciex8086,422c.8086.1321.35' + 'pciex8086,422c.8086.1321' + 'pciex8086,422c.35' + 'pciex8086,422c' + 'pciexclass,028000' + 'pciexclass,0280' + 'pci8086,422c.8086.1321.35' + 'pci8086,422c.8086.1321' + 'pci8086,1321' + 'pci8086,422c.35' + 'pci8086,422c' + 'pciclass,028000' + 'pciclass,0280'
model: 'Network controller'
power-consumption: 00000001.00000001
devsel-speed: 00000000
interrupts: 00000001
subsystem-vendor-id: 00008086
subsystem-id: 00001321
unit-address: '0'
class-code: 00028000
revision-id: 00000035
vendor-id: 00008086
device-id: 0000422c
name: 'pci8086,1321'
Node 0x00000b
acpi-namespace: '\_SB_.PCI0.RP03'
slot-names: 00000001.746f6c53.00000038
reg: 0000e200.00000000.00000000.00000000.00000000
compatible: 'pciex8086,3b46.5' + 'pciex8086,3b46' + 'pciexclass,060400' + 'pciexclass,0604' + 'pci8086,3b46.5' + 'pci8086,3b46' + 'pciclass,060400' + 'pciclass,0604'
model: 'PCI-PCI bridge'
ranges: 81000000.00000000.00003000.81000000.00000000.00003000.00000000.00001000.82000000.00000000.f1800000.82000000.00000000.f1800000.00000000.01400000
bus-range: 00000003.00000003
#size-cells: 00000002
#address-cells: 00000003
device_type: 'pciex'
power-consumption: 00000001.00000001
physical-slot#: 00000002
devsel-speed: 00000000
interrupts: 00000003
unit-address: '1c,2'
class-code: 00060400
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b46
hotplug-capable:
pci-hotplug-type: 00000001
name: 'pci8086,3b46'
Node 0x000014
acpi-namespace: '\_SB_.PCI0.RP03.PXSX'
assigned-addresses: 82030010.00000000.f1830000.00000000.00000100
reg: 00030000.00000000.00000000.00000000.00000000.02030010.00000000.00000000.00000000.00000100
compatible: 'pciex1180,e822.1028.410.1' + 'pciex1180,e822.1028.410' + 'pciex1180,e822.1' + 'pciex1180,e822' + 'pciexclass,080500' + 'pciexclass,0805' + 'pci1180,e822.1028.410.1' + 'pci1180,e822.1028.410' + 'pci1028,410' + 'pci1180,e822.1' + 'pci1180,e822' + 'pciclass,080500' + 'pciclass,0805'
model: 'SD Host controller'
power-consumption: 00000001.00000001
devsel-speed: 00000000
interrupts: 00000001
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '0'
class-code: 00080500
revision-id: 00000001
vendor-id: 00001180
device-id: 0000e822
name: 'pci1028,410'
Node 0x00000c
acpi-namespace: '\_SB_.PCI0.RP04'
slot-names: 00000001.746f6c53.00000039
reg: 0000e300.00000000.00000000.00000000.00000000
compatible: 'pciex8086,3b48.5' + 'pciex8086,3b48' + 'pciexclass,060400' + 'pciexclass,0604' + 'pci8086,3b48.5' + 'pci8086,3b48' + 'pciclass,060400' + 'pciclass,0604'
model: 'PCI-PCI bridge'
ranges: 81000000.00000000.00002000.81000000.00000000.00002000.00000000.00001000.82000000.00000000.f0400000.82000000.00000000.f0400000.00000000.01400000
bus-range: 00000004.00000009
#size-cells: 00000002
#address-cells: 00000003
device_type: 'pciex'
power-consumption: 00000001.00000001
physical-slot#: 00000003
devsel-speed: 00000000
interrupts: 00000004
unit-address: '1c,3'
class-code: 00060400
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b48
hotplug-capable:
pci-hotplug-type: 00000001
name: 'pci8086,3b48'
Node 0x00000d
acpi-namespace: '\_SB_.PCI0.EHCI'
assigned-addresses: 8200e810.00000000.f5450000.00000000.00000400
reg: 0000e800.00000000.00000000.00000000.00000000.0200e810.00000000.00000000.00000000.00000400
compatible: 'pci8086,3b34.1028.410.5' + 'pci8086,3b34.1028.410' + 'pci1028,410' + 'pci8086,3b34.5' + 'pci8086,3b34' + 'pciclass,0c0320' + 'pciclass,0c03'
model: 'Universal Serial Bus EHCI compliant'
power-consumption: 00000001.00000001
fast-back-to-back:
devsel-speed: 00000001
interrupts: 00000001
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '1d'
class-code: 000c0320
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b34
name: 'pci1028,410'
Node 0x00000e
acpi-namespace: '\_SB_.PCI0.P0P1'
slot-names: 0000002f.746f6c53.6c530031.0032746f.746f6c53.6c530033.0034746f.746f6c53.00000032
reg: 0000f000.00000000.00000000.00000000.00000000
compatible: 'pci8086,2448.a5' + 'pci8086,2448' + 'pciclass,060401' + 'pciclass,0604'
model: 'Subtractive Decode PCI-PCI bridge'
bus-range: 0000000a.0000000a
#size-cells: 00000002
#address-cells: 00000003
device_type: 'pci'
power-consumption: 00000001.00000001
devsel-speed: 00000000
unit-address: '1e'
class-code: 00060401
revision-id: 000000a5
vendor-id: 00008086
device-id: 00002448
name: 'pci8086,2448'
Node 0x00000f
#size-cells: 00000001
#address-cells: 00000002
ranges: 00000001.00000000.81000000.00000000.00000000.00000022.00000001.00000024.81000000.00000000.00000024.00000002.00000001.00000028.81000000.00000000.00000028.00000002.00000001.0000002c.81000000.00000000.0000002c.00000006.00000001.00000034.81000000.00000000.00000034.00000002.00000001.00000038.81000000.00000000.00000038.00000002.00000001.0000003c.81000000.00000000.0000003c.00000002.00000001.00000040.81000000.00000000.00000040.00000004.00000001.0000004e.81000000.00000000.0000004e.00000006.00000001.00000060.81000000.00000000.00000060.00000002.00000001.00000063.81000000.00000000.00000063.00000003.00000001.00000067.81000000.00000000.00000067.00000001.00000001.00000070.81000000.00000000.00000070.00000008.00000001.00000070.81000000.00000000.00000070.00000001.00000001.00000080.81000000.00000000.00000080.00000022.00000001.000000a4.81000000.00000000.000000a4.00000002.00000001.000000a8.81000000.00000000.000000a8.00000002.00000001.000000ac.81000000.00000000.000000ac.00000002.00000001.000000b0.81000000.00000000.000000b0.00000006.00000001.000000b8.81000000.00000000.000000b8.00000002.00000001.000000bc.81000000.00000000.000000bc.00000002.00000001.000000c0.81000000.00000000.000000c0.00000020.00000001.000000f0.81000000.00000000.000000f0.00000001.00000001.00000400.81000000.00000000.00000400.00000080.00000001.000004d0.81000000.00000000.000004d0.00000002.00000001.00000500.81000000.00000000.00000500.00000080.00000001.00000680.81000000.00000000.00000680.00000020.00000001.00000930.81000000.00000000.00000930.00000001.00000001.00000934.81000000.00000000.00000934.00000001.00000001.00000cf8.81000000.00000000.00000cf8.00000008.00000001.00001000.81000000.00000000.00001000.00000014.00000001.0000164e.81000000.00000000.0000164e.00000002.00000001.0000ffff.81000000.00000000.0000ffff.00000001.00000000.f54c0000.82000000.00000000.f54c0000.00001000.00000000.f8000000.82000000.00000000.f8000000.04000000.00000000.fed00000.82000000.00000000.fed00000.00000400.00000000.fed10000.82000000.00000000.fed10000.00004000.00000000.fed18000.82000000.00000000.fed18000.00002000.00000000.fed1c000.82000000.00000000.fed1c000.00024000.00000000.fed45000.82000000.00000000.fed45000.0004b000.00000000.fee00000.82000000.00000000.fee00000.00100000.00000000.ff000000.82000000.00000000.ff000000.01000000.00000000.ff000000.82000000.00000000.ff000000.01000000
acpi-namespace: '\_SB_.PCI0.LPCB'
device_type: 'isa'
reg: 0000f800.00000000.00000000.00000000.00000000
compatible: 'pci8086,3b0f.1028.410.5' + 'pci8086,3b0f.1028.410' + 'pci1028,410' + 'pci8086,3b0f.5' + 'pci8086,3b0f' + 'pciclass,060100' + 'pciclass,0601'
model: 'ISA bridge'
power-consumption: 00000001.00000001
devsel-speed: 00000001
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '1f'
class-code: 00060100
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b0f
name: 'isa'
Node 0x00001c
unit-address: '1,60'
interrupts: 00000001.0000000c
reg: 00000001.00000060.00000001.00000001.00000064.00000001
name: 'i8042'
Node 0x00001d
compatible: 'pnpPNP,303'
device-type: 'keyboard'
interrupts: 00000001.0000000c
reg: 00000000
acpi-namespace: '\_SB_.PCI0.LPCB.PS2K'
model: 'System keyboard'
name: 'keyboard'
Node 0x00001e
compatible: 'pnpPNP,f03'
device-type: 'mouse'
reg: 00000001
interrupts: 0000000c
acpi-namespace: '\_SB_.PCI0.LPCB.PS2M'
model: 'PS/2 Port for PS/2-style Mice'
name: 'mouse'
Node 0x00001f
interrupts: 00000004
reg: 00000001.000003f8.00000008
model: 'Standard serial port'
compatible: 'PNP0500'
name: 'asy'
Node 0x000010
acpi-namespace: '\_SB_.PCI0.SAT0'
assigned-addresses: 8100fa10.00000000.00006090.00000000.00000008.8100fa14.00000000.00006080.00000000.00000004.8100fa18.00000000.00006070.00000000.00000008.8100fa1c.00000000.00006060.00000000.00000004.8100fa20.00000000.00006020.00000000.00000020.8200fa24.00000000.f5440000.00000000.00000800
reg: 0000fa00.00000000.00000000.00000000.00000000.0100fa10.00000000.00000000.00000000.00000008.0100fa14.00000000.00000000.00000000.00000004.0100fa18.00000000.00000000.00000000.00000008.0100fa1c.00000000.00000000.00000000.00000004.0100fa20.00000000.00000000.00000000.00000020.0200fa24.00000000.00000000.00000000.00000800
compatible: 'pci8086,3b2f.1028.410.5' + 'pci8086,3b2f.1028.410' + 'pci1028,410' + 'pci8086,3b2f.5' + 'pci8086,3b2f' + 'pciclass,010601' + 'pciclass,0106'
model: 'SATA AHCI 1.0 Interface'
power-consumption: 00000001.00000001
66mhz-capable:
fast-back-to-back:
devsel-speed: 00000001
interrupts: 00000003
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '1f,2'
class-code: 00010601
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b2f
name: 'pci1028,410'
Node 0x000011
acpi-namespace: '\_SB_.PCI0.SBUS'
assigned-addresses: 8300fb10.00000000.f5430000.00000000.00000100.8100fb20.00000000.00006000.00000000.00000020
reg: 0000fb00.00000000.00000000.00000000.00000000.0300fb10.00000000.00000000.00000000.00000100.0100fb20.00000000.00000000.00000000.00000020
compatible: 'pci8086,3b30.1028.410.5' + 'pci8086,3b30.1028.410' + 'pci1028,410' + 'pci8086,3b30.5' + 'pci8086,3b30' + 'pciclass,0c0500' + 'pciclass,0c05'
model: 'SMBus (System Management Bus)'
power-consumption: 00000001.00000001
fast-back-to-back:
devsel-speed: 00000001
interrupts: 00000003
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '1f,3'
class-code: 000c0500
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b30
name: 'pci1028,410'
Node 0x000012
assigned-addresses: 8300fe10.00000000.f5420000.00000000.00001000
reg: 0000fe00.00000000.00000000.00000000.00000000.0300fe10.00000000.00000000.00000000.00001000
compatible: 'pci8086,3b32.1028.410.5' + 'pci8086,3b32.1028.410' + 'pci1028,410' + 'pci8086,3b32.5' + 'pci8086,3b32' + 'pciclass,118000' + 'pciclass,1180'
model: 'DSP/DAP controllers'
power-consumption: 00000001.00000001
devsel-speed: 00000000
interrupts: 00000003
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '1f,6'
class-code: 00118000
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b32
name: 'pci1028,410'
Node 0x000015
device_type: 'acpirootnex'
compatible: 'SOLA0001' + 'acpirootnex' + 'SOLA0002' + 'acpivirtnex'
acpi-namespace: '\'
name: 'fw'
Node 0x000016
unit-address: '1'
compatible: 'SOLA0004' + 'acpicpu' + 'cpu'
apic-id: 00000000
acpi-processor-id: 00000001
acpi-namespace: '\_PR_.CPU0'
device_type: 'acpicpu'
name: 'cpu'
Node 0x000017
unit-address: '2'
compatible: 'SOLA0004' + 'acpicpu' + 'cpu'
apic-id: 00000004
acpi-processor-id: 00000002
acpi-namespace: '\_PR_.CPU1'
device_type: 'acpicpu'
name: 'cpu'
Node 0x000018
unit-address: '3'
compatible: 'SOLA0004' + 'acpicpu' + 'cpu'
apic-id: 00000001
acpi-processor-id: 00000003
acpi-namespace: '\_PR_.CPU2'
device_type: 'acpicpu'
name: 'cpu'
Node 0x000019
unit-address: '4'
compatible: 'SOLA0004' + 'acpicpu' + 'cpu'
apic-id: 00000005
acpi-processor-id: 00000004
acpi-namespace: '\_PR_.CPU3'
device_type: 'acpicpu'
name: 'cpu'
Node 0x00001a
unit-address: '0'
compatible: 'acpidevice' + 'SOLA0002' + 'acpivirtnex'
acpi-namespace: '\_SB_'
device_type: 'acpidevice'
name: 'sb'
Node 0x00001b
io-space: 00000000.00000020.00000020.00000002.00000024.00000002.00000028.00000002.0000002c.00000002.0000002e.00000002.00000030.00000002.00000034.00000002.00000038.00000002.0000003c.00000002.00000040.00000004.0000004e.00000002.00000050.00000004.00000060.00000001.00000061.00000001.00000063.00000001.00000064.00000001.00000065.00000001.00000067.00000001.00000070.00000008.00000070.00000001.00000080.00000001.00000081.00000011.00000092.00000001.00000093.0000000d.000000a0.00000002.000000a4.00000002.000000a8.00000002.000000ac.00000002.000000b0.00000002.000000b2.00000002.000000b4.00000002.000000b8.00000002.000000bc.00000002.000000c0.00000020.000000f0.00000001.00000400.00000080.000004d0.00000002.00000500.00000080.00000680.00000020.00000930.00000001.00000934.00000001.00000cf8.00000008.00001000.00000004.00001004.00000010.0000164e.00000002.0000ffff.00000001
device-memory: f54c0000.00001000.f8000000.04000000.fed00000.00000400.fed10000.00004000.fed18000.00001000.fed19000.00001000.fed1c000.00004000.fed20000.00020000.fed45000.0004b000.fee00000.00100000.ff000000.01000000.ff000000.01000000
dma-channels: 00000004
interrupts: 00000000.00000001.00000002.00000008.0000000c.0000000d
name: 'used-resources'
prtdiag:
System Configuration: Dell Inc. Latitude E4310
BIOS Configuration: Dell Inc. A05 11/20/2010
==== Processor Sockets ====================================
Version Location Tag
Intel(R) Core(TM) i5 CPU M 560 @ 2.67GH CPU 1
==== Memory Device Sockets ================================
Type Status Set Device Locator Bank Locator
Unknown in use 0 DIMM_A BANK 0
unknown empty 0 DIMM_B BANK 2
==== On-Board Devices =====================================
"Intel GM45 Graphics"
NETWORK_NAME_STRING
==== Upgradeable Slots ====================================
ID Status Type Description
0 available PCI Express x16 J5C1
1 available PCI Express J6C2
2 in use PCI Express J6D2
3 in use PCI Express J7C1
4 available PCI Express J7D2
System Information:
Manufacturer:Dell Inc.
Product:Latitude E4310
BIOS Information:
Vendor:Dell Inc.
Version:A05
Release Date:11/20/2010
BIOS Revision: BIOS Revision:4.6
Firmware Revision:
MotherBoard Information:
Product:0D8H24
Manufacturer:Dell Inc.
Version:A00
Onboard Devices:[Video,Disabled]"Intel GM45 Graphics"
CPU Information:
Processor 0:
Processor Socket Type:CPU 1
Processor Manufacturer:Intel
Current Voltage:0.0V
External Clock:533MHZ
Max Speed:4000MHZ
Current Speed:2666MHZ
Memory Information:
Physical Memory: 4G (4G)
Maximum Memory Support: 4096G
Memory Subsystem 0:
Array Used Function:System memory
Memory Error Correction Supported:None
Maximum Array Capacity:8G
Number of Memory Devices:2
Memory Device 0:
Memory Device Locator:DIMM_A
Total Width:64
Data Width:64
Installed Size:4096M
Memory Device Type:Unknown
Speed:1067MHZ
Memory Device 1:
[Not Installed]

Openwindows dt libs problems in Solaris 2.8

Hello
My Motif Apps work fine with solaris 2.6
Now, we are moving to solaris 2.8.
I compiled the SAME source code in solaris 2.8 - this App have a different look and feel - like fonts being different, bgcolor, etc.
however, if i compile with solaris 2.6 /usr/dt/lib and /usr/openwin/lib - all looks similar
can anyone point the problems with solaris 2.8
/usr/dt/lib and /usr/openwin/lib
Thanks,
venkat

Are you using the same dot files, from the same
login account in each case? This sounds like some
local settings are different. Using different
monitors can make a difference, too. There are two
different systems with the same monitor which you
are using from the same home dir?

DNS PRoblem in SOLARIS 9.0

Hi
can any one help me on this
I am facing dns problem in solaris sparc 9.0. I am not able to see
" /etc/named.conf" .If i type in.named -v it is showing BIND version .is it required to install bind seprately.
I downloaded BIND from sunfreeware i tried to compile but it is throghing the error something like "make cannot build" after running "./confiugre"
One more query is it possible to install dns and nis server in same solaris box .
could any one guide me how to setup the DNS server and how to configure
Thanks
SolarisTeam

Hi
Thanks for the reply,
It is working fine with the upgraded version of Weblogic 9.0 from weblogic 8.1. But not with the fresh installation of Weblogic 9.0.
Thanks,
Raj

Installation problems on Solaris 9

I am having issues installing the base software and can't seen to figure
out how get past this. The error message from the installation log is as
follows:
Accept terms of Software License Agreement? [R] y
pwd: cannot determine current directory!
/tmp/installwnaWXF/checkinstallynaWXF: no home directory
Error during installation. Setup will now exit.
Please correct any errors described in /tmp/tta_inst.log, and then try
again.
Cleaning up temporary files...
# cat /tmp/tta_inst.log
**snip**
Processing package instance <tta> from </tmp/ttainst_1/ttapkg.15978/pkg>
Tarantella Secure Global Desktop Enterprise Edition for SPARC Solaris 2.8+
(SPARC) 4.10.903
Tarantella, Inc.
pkgadd: ERROR: request script did not complete successfully
Installation of <tta> failed.
No changes were made to the system.
Script detail for package <tta>
---> checkinstallynaWXF
Any help from here would be appreciated.
gavin

from the diagnostic details:
Architecture           spso0509
Host           SunOS e220r 5.9 Generic_117171-17 sun4u sparc SUNW,Ultra-60
Package           Tarantella Secure Global Desktop Enterprise Edition for
SPARC Solaris 2.8+ (4.10.903)
Package           Tarantella Secure Global Desktop Enterprise Edition Andrew
Fonts (4.10.903)
Package           Tarantella Secure Global Desktop Enterprise Edition Hangul
Fonts (4.10.903)
Package           Tarantella Secure Global Desktop Enterprise Edition Platform
Identity Pack for SPARC Solaris 2.8+ (4.10.903)
Package           Tarantella Secure Global Desktop Enterprise Edition Security
Pack for SPARC Solaris 2.8+ (4.10.903)
Package           Tarantella Secure Global Desktop Enterprise Edition Windows
Connectivity Pack for SPARC Solaris 2.8+ (4.10.903)
Bill Weir wrote:
Gavin,
Glad you're sorted. Can you confirm that it is 4.10.903 you are using
(not 4.00.903)? I'm concerned if this installation problem is still
present in the later version.
Bill
Gavin Westermann wrote on 31/08/2005 05:00:
Bill - that seems to have done the trick! the installation is now running.
Thanks so much for this.I am running a pair of Sun Ray 170's on my desk
here at home mated to an E220R. I am hoping to use Tarantella to be able
to access and run apps on a win3k server in the same rack.
Gavin
Bill Weir wrote:
Gavin,
This looks like a known problem with TTA 4.00.903 and some Solaris
patches which were distributed at about the same time. However, you say
you're using 4.10.903, and as far as I know the problem should be fixed
in that version.
You could try the workaround described in
http://www.tarantella.com/documentation/sgd/ee/4.0/install.html - search
for "tta_pkgadd" on that page and follow the instructions given there.
Regards,
Bill Weir, Sun Microsystems Inc.
Gavin Westermann wrote on 30/08/2005 05:06:
I am having issues installing the base software and can't seen to figure
out how get past this. The error message from the installation log is as
follows:
Accept terms of Software License Agreement? [R] y
pwd: cannot determine current directory!
/tmp/installwnaWXF/checkinstallynaWXF: no home directory
Error during installation. Setup will now exit.
Please correct any errors described in /tmp/tta_inst.log, and then try
again.
Cleaning up temporary files...
# cat /tmp/tta_inst.log
**snip**
Processing package instance <tta> from </tmp>
Tarantella Secure Global Desktop Enterprise Edition for SPARC Solaris 2.8+
(SPARC) 4.10.903
Tarantella, Inc.
pkgadd: ERROR: request script did not complete successfully
Installation of <tta> failed.
No changes were made to the system.
Script detail for package <tta>
---> checkinstallynaWXF
Any help from here would be appreciated.
gavin

PCI id problem under Solaris-8,9,10

In attempting to qualify a SuperMicro X5DA8 dual CPU dual channel SCSI card I have found a problem with the PCI id's for the Adaptec 7902 (Ultra-320) chipset. My question is whether the problem is SuperMicro's, Sun's or Adaptec's.
The DCA->Device Tasks->View/Edit Devices displays the PCI id of the two SCSI controllers as follows:
[ ] PCI: 9005,801f.9005.5f.3 Adaptec AIC-7902 - Ultra 320 SCSI
The /etc/driver_aliases file has the entries:
cadp "pci9005,5f"
adpu320 "pci9005,801f"
The file: /boot/system/driverdb/master has the entries:
pci9005,801f pci9005,801f msd pci adpu320.bef "Adaptec AIC-7902 - Ultra320 SCSI"
pci9005,5f pci9005,5f msd pci cadp.bef "Adaptec AIC-7896 SCSI"
Checking in www.pcidatabase.com shows that the two above identifiers map to:
9005,801f Vendor Adaptec: Ultra320 SCSI Controller
9005,5f Vencor Adaptec: Ultra2 SCSI Controller !!!!!
The presence of the 9005.5f is confusing Solaris to the point that it is loading the incorrect driver and crashing. It is my belief the the 9005.5f device identifier is incorrect, or is it? Is this identifier put in firmware by SuperMicro or is it possibly embedded in the AIC-7902 chips?
As I am not an OEM to SuperMicro or Adaptec I can't ask them directly. If anyone has any insight as to whose problem this is I can hopefully report it as a bug to the appropriate party and perhaps get it fixed.
Kudos to j.keil for helping me sort this out. I am able to get Solaris-10 running on this board but only after hacking the aforementioned files. It would be nice to have it work out of the box.
Charlie Jack

Hello Phil,
<i>Cjack, did you get a resolution for this?</i>
if you review his profile you will see that his last login to this forums was on April 21st 2005 and if you read the last sentence of his post...
<table border="0" align="center" width="90%" cellpadding="3" cellspacing="1"><tr><td class="SmallText"><b>Quote:</b></td></tr><tr><td class="quote">
Kudos to j.keil for helping me sort this out. I am able to get Solaris-10 running on this board but only after hacking the aforementioned files. It would be nice to have it work out of the box.
</td></tr></table>
Unfortunately notification (answers to watched topics) still <b>doesn't</b> work, besides the bug (blank screen after post) that is responsible for double-posting .
I would suggest that you post on the SolarisX86 yahoogroup. This is the place besides Opensolaris.org where you can find more Sun engineers or other knowledgeable SolarisX86 people.
<table border="0" align="center" width="90%" cellpadding="3" cellspacing="1"><tr><td class="SmallText"><b>Quote:</b></td></tr><tr><td class="quote">
Please check the Links page before posting:
http://groups.yahoo.com/group/solarisx86/links
Post message: solarisx86@yahoogroups.com
UNSUBSCRIBE: solarisx86-unsubscribe@yahoogroups.com
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/solarisx86/
<*> To unsubscribe from this group, send an email to:
solarisx86-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
</td></tr></table>
Michael

Compilation problem in solaris 10

Hi,
Iam using solaris 10 SUNW,UltraAX-i2. Iam trying to compile tripwire binaries tw_ASR_1.3.1_SRC. Iam using gcc 3.3.2, later I installed the libiconv package.
on reading the documentation from sunfreeware i modified the file mkheaders.conf putting the line SHELL=/bin/sh in the directory
usr/local/lib/gcc-lib/sparc-sun-solaris10/3.3.2/install-tools
The PATH and LD_LIBRAY_PATH are like this
# echo $PATH
/usr/local/bin:/etc:/usr/sbin:/usr/bin:/usr/ccs/bin:/usr/ucb:/bin:/sbin/:/usr/sb
in:/usr/man:/usr/include/
# echo $LD_LIBRARY_PATH
/usr/local/lib:/usr/X/lib:/usr/lib:/usr/ucblib:/lib:/usr/ccs/lib:/etc/lib:/usr/d
t/lib
Once I changed the configuration changes in the tripwire source. Iam trying to compile make & make install. The output of the make is like this
# make
(cd util; make CC=gcc CFLAGS="-O" \
LDFLAGS="-ldl" CPP="gcc -E" SHELL=/bin/sh all)
### Ignore warnings about shift count negative/too large on line 36
gcc -O -ldl byteorder.c -o byteorder
byteorder.c: In function `main':
byteorder.c:36: warning: left shift count >= width of type
byteorder.c:25: warning: return type of `main' is not `int'
(./byteorder; cat ./ntohl.h) > ../include/byteorder.h
gcc -O -ldl types.c -o types
types.c: In function `main':
types.c:29: warning: return type of `main' is not `int'
/bin/sh ./types.sh "gcc -E" > ../include/inode.h
(cd src; make CC=gcc CFLAGS="-O" LIBS="" \
LDFLAGS="-ldl" CPP="gcc -E" SHELL=/bin/sh \
YACC="yacc" LEX="lex" all)
/bin/sh help.sh help.txt > help.c
gcc -O -c config.parse.c
gcc -O -c main.c
main.c:704:2: warning: no newline at end of file
gcc -O -c list.c
gcc -O -c ignorevec.c
gcc -O -c dbase.build.c
gcc -O -c utils.c
gcc -O -c preen.c
gcc -O -c preen.interp.c
gcc -O -c preen.report.c
gcc -O -c nullsig.c
gcc -O -c config.prim.c
gcc -O -c dbase.update.c
lex config.pre.l
mv lex.yy.c config.lex.c
yacc config.pre.y
sed 's/lex\.yy\.c/config.lex.c/' < y.tab.c > config.pre.c
rm y.tab.c
gcc -O -c config.pre.c
gcc -O -c help.c
(cd ../sigs/md5; make CC="gcc" CFLAGS="-O -I. -I..")
gcc -O -I. -I.. -c md5.c
gcc -O -I. -I.. -c md5wrapper.c
(cd ../sigs/snefru; make CC="gcc" CFLAGS="-O -I. -I..")
gcc -O -I. -I.. -c snefru.c
(cd ../sigs/crc32; make CC="gcc" CFLAGS="-O -I. -I..")
gcc -O -I. -I.. -c crc32.c
(cd ../sigs/crc; make CC="gcc" CFLAGS="-O -I. -I..")
gcc -O -I. -I.. -c crc.c
(cd ../sigs/md4; make CC="gcc" CFLAGS="-O -I. -I..")
gcc -O -I. -I.. -c md4.c
gcc -O -I. -I.. -c md4wrapper.c
(cd ../sigs/md2; make CC="gcc" CFLAGS="-O -I. -I..")
gcc -O -I. -I.. -c md2wrapper.c
gcc -O -I. -I.. -c md2.c
(cd ../sigs/sha; make CC="gcc" CFLAGS="-O -I. -I..")
gcc -O -I. -I.. -c sha.c
gcc -O -I. -I.. -c shawrapper.c
(cd ../sigs/haval; make CC="gcc" CFLAGS="-O -I. -I..")
gcc -O -I. -I.. -c haval.c
gcc -O -I. -I.. -c havalwrapper.c
gcc -O -ldl -o tripwire config.parse.o main.o list.o ignorevec.o dbase.build.o
utils.o preen.o preen.interp.o preen.report.o nullsig.o config.prim.o dbase.upd
ate.o config.pre.o help.o ../sigs/md5/md5wrapper.o ../sigs/md5/md5.o ../sigs/s
nefru/snefru.o ../sigs/crc32/crc32.o ../sigs/crc/crc.o ../sigs/md4/md4.o ../sigs
/md4/md4wrapper.o ../sigs/md2/md2.o ../sigs/md2/md2wrapper.o ../sigs/sha/sha.o .
./sigs/sha/shawrapper.o ../sigs/haval/haval.o ../sigs/haval/havalwrapper.o
gcc -O -ldl -o siggen siggen.c ../sigs/md5/md5wrapper.o ../sigs/md5/md5.o ../sig
s/snefru/snefru.o ../sigs/crc32/crc32.o ../sigs/crc/crc.o ../sigs/md4/md4.o ../s
igs/md4/md4wrapper.o ../sigs/md2/md2.o ../sigs/md2/md2wrapper.o ../sigs/sha/sha.
o ../sigs/sha/shawrapper.o ../sigs/haval/haval.o ../sigs/haval/havalwrapper.o
nullsig.o utils.o
I think it is not showing any problem. But when I try to make install it is throwing some
error like this. It was unable to find theinsta;; directory under /usr/local/bin. Manually I created the directory to test, it is throwing an error saying that bad file number.
Can any one help me what could be the reason for this.
# make install
(cd util; make CC=gcc CFLAGS="-O" \
LDFLAGS="-ldl" CPP="gcc -E" SHELL=/bin/sh all)
(cd src; make CC=gcc CFLAGS="-O" LIBS="" \
LDFLAGS="-ldl" CPP="gcc -E" SHELL=/bin/sh \
YACC="yacc" LEX="lex" all)
/usr/local/bin/install -d /usr/local/bin
sh: /usr/local/bin/install: not found
*** Error code 1
make: Fatal error: Command failed for target `install'
Sanjeev

This forum is about using Sun Studio. Your question is about tripwire, which is not a Sun product, and gcc, which is not Sun Studio. I suggest you take your question to a tripwire forum. Check the location where you got tripwire for a support forum.

Installation problems with Solaris 8 on Intel

Howdy,
I am having some problem with my installation of Solaris 8 on Intel. I am installing the system on a P133 (Asus TX97 motherboard). When I first start the installation and perform the system scan I get the following error:
The PnP ISA: IDE Controller programable device was unable to be programmed.
This could be caused by two possible reasons:
- Lack of resouces available
- There is a conflict with the following already-existing device: 8086,7111 - Bus Mastering IDE Controller
When I bring up the View/Edit device settings and I scroll to the IDE controller there is an ! mark beside the PCI IDE controller. The controler is specifying: Bus 0, device: 1, function: 1 port 1F0-1F7, 3F6, 170-177, 376, E000-E00F, 0 IRQ 14, 15
Does anyone have any suggestions on how to resolve this conflict? I tried removing the PCI IDE interface and then installing a ISA IDE interfact (for IRQ: 14, IRQ 15 automatically put a PnP IDE controller there). This seemed to resolve the conflict but then I received a: No Bootable devices have been found.
If anyone can help out with how to resolve the conflict, or what the No Bootable Devices have been found error it would be greatly appreciated.
Currently there is a partition set up with NT on it, but I wish to basically get rid of everything on the HD and install Solaris on it. FYI, when I check the HD's in NT it mentions I/0: 1F0-1F7 IRQ 14 and also I/O 170-177 IRQ 15.
Any help would greatly be appreciated.
Regards,
S.

When I close down Solais in the CDE I am taken back to the logon screen
and I turn the PC off.Don't do that. If you simply turn off the PC, the OS has no chance to
write back cached / modified disk data back to the HDD - this is also the
reason why solaris has to check the filesystems on the next boot and apparently
has to repair filesystem defects.
What you have to do is shutdown the machine, before you can power it off.
Login as user "root" and use the command
init 5
or
halt
"init 5" will shutdown system services, by executing commands from
/etc/rc0.d/K* with argument "stop". Then it'll sync all modified disk blocks to
the HDD, kills all remaining processes and unmounts all filesystems. In this
state it's safe to power off the machine!
"halt" is a quick-and-dirty shutdown. It does not stop system services (the
/etc/rc0.d/K* commands are not run). But, it syncs all modified disk blocks
to the HDD, kills all processes and unmounts all filesystems. "init 5" is preferred,
especially if you have services like a database server running on the machine,
which needs to be cleanly shutdown. On the other hand, with a default solaris
installation and no extra services, a simple "halt" should be OK.
Btw. if multiple users are logged in on the machine, you should also have a look
at the shutdown(1M) command. "shutdown" sends warnings to the logged in
users that the machine is about to be shut down, ...

Sort problems in solaris 10

Similar Messages

Maybe you are looking for