Sort Rule in Strategy Info

Dear all,
I have maintained Sort Sequence ZBATCHSORT in my strategy type ZSD1 which is getting picked up at the time of delivery.
But the problem is that during delivery when we do batch split,
my Sort rule does not get automatically picked up in the Strategy Info.I have to give it manually every time in the Strategy group after which my sort rule becomes effective.
What needs to be done?
Regards,
Rahul.

Dear all,
In VCH2, for that strategy type , we have to give the sort rule name in the sort tab after slecting the line item.
It will then get picked up automatically in the strategy info.

Similar Messages

  • Sorting Rule in Batch Management

    Hi,
    I want to issue 23no of pieces from my stock which is in batch managment.It is picking 20qty correctly but its not picking from a batch where qty 3 is available.How can I solve it.
    I used LOBM_ZUSTD (qty status) as characteristics for sorting rule.You can see the senario here while issuing.
    Batch           Split quantity    Available quantity SLoc S
    0000000416                20                20             0001
    0000000414                 3                 15             0001
    0000000415                                   10              0001
    0000000417                                    5               0001
    0000000418                                    3               0001

    Are you doing batch determination for a SD delivery, just for an MM movement, or for PP or for WM?

  • Sorting rule for generating voucher number ina payment batch.

    Hi All,
    How does system generate the voucher number in a payment batch?
    In my system, some voucher number in a payment batch seem sorted by supplier name, some are not.
    I want to know is there any sorting rule for generating voucher number in a payment batch?
    Thanks in advance,
    Best Regards.
    Edited by: user631092 on Jul 16, 2009 3:07 PM

    Hi John,
    Thanks for your information. Maybe I did not explain clearly.My problem is...
    If my setup for payment doucument sequence is starting with 200900000001.
    The user create a payment batch for 10 payments, 200900000001~200900000010.
    I am wondering how does the system decide which payment is 200900000001, which one is 200900000002?
    My users used to file the physical document sorting by supplier name for one batch.
    Most of time, the payment document numbers are also sorted.For expamples,
    200900000001 Supplier A
    200900000002 Supplier B
    200900000003 Supplier C
    Sometimes the sequence become like this,
    200900000001 Supplier B
    200900000002 Supplier A
    200900000003 Supplier C
    Thank you.
    Best Regards,
    Edited by: user631092 on Jul 16, 2009 3:23 PM

  • Sorting Rule in Sorting Table

    Can we define a custom sorting rule for a column in a SortingTable ?
    Currently, all the columns in my SortingTable are being sorted alphabetically. Is there a way I can change that ? (Eg. Alphabetically, Nov will precede Oct. Should be the other way round)
    Thanks,
    896180

    Sorting table provides both way of sorting by default and also on numeric as well then what are you looking for.

  • In the tranformation i have deleted a rule for an info object material?

    Hi all,
    In the transformation i have deleted a rule for an info object material and then moved into quality. The number of columns is 10 after the material is excluded.
    And the same transport moveed to production with warning messages.
    the number of columns is 11 and it is not 10 when i check in the quality!!
    Can anyone help me on this!!
    thanks
    Pooja

    Hi,
    As you said you removed the rule in transformation for an object (attribute) in matreila master data object.
    Number of column/attrbute will remain same when you will see data in master data object (material). It is just the mapping from source is removed so you will not see any data in that attribute/column for whihc you have removed the rule/transformation.
    For removing column you need to remove attribute/Info Object from Master data object (Material) attribute list.
    I hope it will help.
    Thanks,
    S

  • Sort sequence and sort rules

    Hello friends,
    In batch determination at delivery level
    In strategy type SD01, if I don't maintain sort sequence
    can sytem automatically determines the batch at delivery level?
    Please clarify my doubt.
    regards,
    Sekhar_sd consultant.

    Hi Harrison,
    Noted. Thanks.
    Best practice to achieve optimal performance also states that in all the look up tables (includes Qualified), sort index for DF must be set to Normal.
    Ref:SAP Note 1258982 ; Read 'Please Note' which states the above .
    Please put your thoughts on this.
    Reards,
    Vinay

  • Sorting tab in "get info"

    If you select get info for any particular track there is a tab called sorting. I can not find anything in the help topics about how you can use this. Looking for somebody who uses this and can tell me what I can and can not do with this function?
    Thanks for any help and/or advice.
    [email protected]

    Yes. iTunes will alphabetize by whatever's in the Sorting field instead of whatever's in the associated field — if the Album field contains "Dark Side of the Moon" and the Album Sort field contains "Attack of the Killer Tomatoes", Dark Side of the Moon will appear with the A's when sorted by Album.
    If you want to apply a Sorting field to other tracks with the same data, control-click it and select "Apply sort field..." from the contextual menu that pops up.

  • SORT VALUES IN AN INFO OBJECT

    Hi -
    I am on BW 3.5, wrote a query in BEX, and displayed in Webpage.
    On the webpage, there is an info object for Fiscal Year/Period that when you click on the selection button to drill down the variable, it will display values such as 001/2008, 002/2008, 003/2008, etc.
    Users wonder if we can sort these values descending so the latest period will show first?
    Appreciate any help.
    Thanks, Minh Le

    Hi
    Right click on your infoobject and select properties.
    Sorting - select the option as descending.
    Regards
    M.A

  • Batch determination -sort rule -reg

    hi,
    requirement is :
    Through COR2 , for the process order's component  when  batch determination is done , Batch determination should first select  for the unrestricted stock in the storage location and once all the unrestricted stock is consumed then only batch determination should happen from the stock of the batches of the  consignment  stock in the storage location.
    With in the stock of the storage location ... first it should check for unrestricted  stock  -with in unrestricted  it should sort based on GR date of the batch and consume the oldest batch.Once all unrestricted is consumed then only it should look for consignment stock consumption , again based on the Gr date and consume the oldest batch  with in the consignment .
    We have created a sort sequence with unrestricted stock as the first characteristic (table MCHB-field CLABS in the additional data tab of the CT04) and then Gr date in ascending (table MCH1-Field LWEDT)
    and also tried with the combination of consignment stock also (from MARD table )  but it is not working as expected
    System is always picking the oldest GR date batch irrespective whether it is unrestricted or consignment  as sorting is done for the characteristic  Gr date which is updated in the classification tab of the batch when it is created .
    Can the multiple sorting ( first sort on stock type :unrestricted / consignment & then on gr date) is possible   in standard SAP
    please guide us
    regards,
    Madhu Kiran

    Hi Madhu,
    I have the same issue.  What was your solution please ?
    Thanks in advance,

  • Books: Sorting PDF's / Using info fields with PDF's

    Since it is possible to manage PDF's in iTunes, I've been importing quite a few (well, just drag and drop). So far, I just changed the Name field to the title of the article or book, the Artist field to the authors name, and picked an appropriate genre.
    Since the info fields aren't really made for books and articles, I'm wondering which fields to use for publisher and series information.
    Anybody experimented with this already?

    You may try the VBScript in that discussion:
    http://forums.adobe.com/message/3796931#3796931
    If it works change your *.net script to that.
    If it not work try to get another one to test it on Acrobat X.
    Should be simple because VBS run's on every Win-PC.
    HTH,
    Reinhard

  • Sorting rules in iTunes 11

    Any suggestions on how to use the sorting option the most efficiently in Itunes?

    Use it however it works best for you.
    Any other extremely vague questions?

  • Sorting rule

    Hi All,
    i have to sort a set of records by one field.. this field could be blank and may have digits as well..
    So i need to sort this internal table such that blank spaces have a precedence over alphabets and alphabets over digits.
    How do i go about doing this..
    Thanks in advance,
    Herwin.

    HI check this code it is working as u need.
    TYPES: begin of  t_c,
      c type char1,
      end of t_c.
      data: t_tab type STANDARD TABLE OF t_c.
      data w_c type t_c.
    data:t_tab1 type STANDARD TABLE OF t_c.
      w_c-c = space.
        append w_c to t_tab.
          w_c-c = '1'.
        append w_c to t_tab.
          w_c-c = 'a'.
        append w_c to t_tab.
        sort t_tab DESCENDING.
       loop at t_tab into w_c where c is INITIAL.
         append w_c to t_tab1.
          endloop.
    loop at t_tab into w_c where not c is initial .
       append w_c to t_tab1.
          endloop.
          if sy-subrc = 0.
            endif.
    Check the entries in tab t_tab1 in debug. It is according to your requirement I hope.
    Edited by: Anurag_n on Feb 23, 2010 12:03 PM

  • Loading Transfer Rules details into Info Cube/ODS - VVVVV urgent

    Hi Guys.
    I  have a requirement to load all the active and inactive transfer rules into a cube so that i can prepare a report which are the active and inactive transfer rules existed in out BW system.
    Please hel me out in this regards.
    ThanX inadvance
    Peter B

    Hi Varaprasad,
    Ok, can we make use of that table for reporting?
    Or
    I can created a Cube as per that table and i don't know ho to load that table data into that Cube.
    Please let me know ASAP.
    Thanks in advance
    Peter B

  • TreeByNestingTableColumn and sorting rules for children

    Hi,
    i have created my first WD Application by using a table with a TreeByNestingTableColumn. My question is how can i influence the order of the children. It seems that the order is hard coded and depends on the sequence of the entries in the table. I added and moved the childs on differnent positions in the table ( by using "bind element ..index x ) . I expected a special field/attribute in the UI element which can be used to influence the sequence of the children.
    A second question: Is it possible to combine WD-ALV table with a TreeByNestingTableColumn ? I have the impression that you only can use TreeByKeyTableColumn within WD-ALV to build a hierachy.
    Thanks in advance, Juergen

    Hi Juergen,
    The ALV does not support the hierarchy functionality. As far as I know the only way to get a hierarchy is to build a table, sort and collapse by one column.
    Especially the tree by nesting is not supported by the ALV.
    Just use the normal table control with the mastercolumn.
    Ciao, Regina

  • Add update rule for new key figure in one info struc

    Hi, everyone
    I would like to know how to add update rule for new key figure in one info struc.
    Thanks ahead.
    Eric

    1)I have created the update rule for one info structure
    2)add one key figure in the info structure due to business requirement
    3)then I use MC25 to add update rule for the new key figure, but I find that there no relevant menu to do such operation.
    Can anybody tell me how to do with it?
    Any answer will be appriciated.

Maybe you are looking for