Sort the Data Selection in TVARV Table
hello...i wanted to run a SAP Standard Program and it is have a variant selection for me to select the variable from TVARV table. When this program run, I would like to have a selection of choosing the latest date to run the program based on the variant I save. I created a variables in the TVARV table but I cannot see any selection which can sort the selection based on the latest date. I can only choose to be EQ and etc. Is there any selection that I can make so that the program always choose to be run based on the latest date? thanksss alot!!!
Look at table VARID.
Rob
Similar Messages
-
How do I sort the data in the spreadsheet?
This is a fairly basic question and something I do all the time. I need to sort the data on a particular column or set of columns and am frustrated that it is this difficult to find. In trying to figure this out I know also have a chart on my spreadsheet that I can't seem to delete.
If you don't see a gray bar above the table, then tap a cell to show the gray bar.
Select a column by tapping the gray bar directly above the column. After the column is selected, tap the exact same spot again to show a menu.
In the menu, tap on Sort... etc...
Sort will sort the selected column, but will also update the entire table accordingly. If you don't want the rest of the table to update, then you have to copy that column (with the columns that you do want to update) and paste them onto the canvas so they appear in their own table. Sort the column then and paste it back into the original table.
Delete the chart from a menu that appears similarly as Sort. Tap on the chart one time to select it. Tap it again to show the menu with Delete. If you are doing this and choosing Delete, but the chart is not disappearing, then there might be a problem with the file. -
How to pass the data from a input table to RFC data service?
Hi,
I am doing a prototype with VC, I'm wondering how VC pass the data from a table view to a backend data service? For example, I have one RFC in the backend system with a tabel type importing parameter, now I want to pass all the data from an input table view to the RFC, I guess it's possible but I don't know how to do it.
I try to create some events between the input table and data service, but seems there is no a system event can export the whole table to the backend data service.
Thanks for your answer.Thanks for your answer, I tried the solution 2, I create "Submit" button, and ser the mapping scope to be "All data rows", it only works when I select at least one row, otherwise the data would not be passed.
Another question is I have serveral imported table parameter, for each table I have one "submit" event, I want these tables to be submitted at the same time, but if I click the submit button in one table toolbar, I can only submit the table data which has a submit button clicked, for other tables, the data is not passed, how can I achieve it?
Thanks. -
How can we delete the data in e-fact table.
how can we delete the data in e-fact table.
hii,
You cannot delete the request individually but you can one of the following:
1. Do a selective deletion from the cube. RSA1 -> Cube -> Contents -> selective deletion.
2. Delete all the data in the cube and then reconstruct only the required request ids. This would work only if you have the PSA available for all the requests.
3. Reverse posting is another possibility.
hope it helps,
partha -
How to recover the data from a dropped table in production/archive mode
How to recover the data/change on a table that was dropped by accident.
The database is on archive mode.Oracle Version. ? If 10g.
Try this Way
SQL> create table taj as select * from all_objects where rownum <= 100;
Table created.
SQL> drop table taj ;
Table dropped.
SQL> show recyclebin
ORIGINAL NAME RECYCLEBIN NAME OBJECT TYPE DROP TIME
TAJ BIN$b3MmS7kYS9ClMvKm0bu8Vw==$0 TABLE 2006-09-10:16:02:58
SQL> flashback table taj to before drop;
Flashback complete.
SQL> show recyclebin;
SQL> desc taj;
Name Null? Type
OWNER VARCHAR2(30)
OBJECT_NAME VARCHAR2(30)
SUBOBJECT_NAME VARCHAR2(30)
OBJECT_ID NUMBER
DATA_OBJECT_ID NUMBER
OBJECT_TYPE VARCHAR2(19)
CREATED DATE
LAST_DDL_TIME DATE
TIMESTAMP VARCHAR2(19)
STATUS VARCHAR2(7)
TEMPORARY VARCHAR2(1)
GENERATED VARCHAR2(1)
SECONDARY VARCHAR2(1)
SQL>M.S.Taj -
Make the data fit in 1 or 2 pages in Rpt as per the data selection- Hyp IR
Hi,
Request to provide me solution for the following issue at the earliest :
On dashboard I'll have 3 dropdowns drp1,drp2,drp3 and 3 list boxes lb1,lb2,lb3. User selects value from drp1 and selected value can be placed in lb1 thru "=>" button. So any no. of values (less or more values) can be placed in lb1 selected from drp1. Similarly values selected from drp2 placed in lb2 and values selected from drp3 in lb3 thru "=>" buttons.
After selecting process button I have to place the list box (lb1,lb2,lb3) values (Text) in Text Labels (tlb1,tlb2,tlb3) on the Report. First part of the report contains Pivot with some calculations. Pivot will increase or decrease horizontally. Vertically its size is fixed. Down the pivot, Text Labels tlb1,tlb2,tlb3 are placed down the other. Spring option has been used for tlb1,tlb2,tlb3.
Now issue I am facing is If user selects more values from drp1,drp2,drp3 then in report tlb1,tlb2,tlb3 are expanding and I am getting the report with 2 pages. After that if user selcts less values from drp1,drp2,drp3 then the data selected getting fitted in single page of report but the 2nd page previously expanded remains exist. But user should not get this 2nd page blank. I tried to apply report grouping . But didn't worked.
Please suggest me solution for this problem. Can I achieve this requirement if I use any other controls instead of text labels in Report ( less values single page more values 2 pages). Thanks.Thanks Eric for the response.
Our requirement is, in a Production instance, not to allow a DB user (APPS/SYSTEM) to see the confidential data. For example, a user who has the APPS schema password should not be able to see the salary details. However allowing the application like forms/reports/jsp to present the actual data and not the masked data.
I understand from your reply that the data masking feature CANNOT be used for this purpose as it is rebiulding the tables with the masked data. However we understand that the same feature can be used in a TEST/DEV environment so that we can restrict the developer who is working on the TEST/DEV instance, from accessing the confidential data.
Any pointers to acheive our requirement will be highly helpful.
Thanks for your time.
Ramana. -
"Error occurred in the data selection" on init delta load ODS- InfoCube
Hi, gurus and experts!
I'm trying to do Init delta load from 0FIAR_O03 ODS into 0FIAR_C03 InfoCube in PRD env. by InfoPackage "Initialize with delta transfer (with data transfer)". Immediately after the load was started I got error
"Error occurred in the data selection"
with details
"Job terminated in source system --> Request set to red".
Where are no any short dumps. There are 1 activated init load in ODS - nearly 6 500 000 records.
Any ideas about error? And the way I can load data?Hi Gediminas Berzanskis,
I faced the similar error when I tried to load data from an ODS which contained huge amount of data to a Cube. Even in your case the volume of data is more (around 6.5 million records). The error could be due to the table space issue, please contact your Basis team to check if enough table space exist for both the data targets.
Meanwhile you may also check the RFC connection of the Myself source system.
You can replicate the DSO datasource once and then reactivate the transfer rules using the program RS_TRANSTRU_ACTIVATE_ALL.
Try load with a small amount of data with a Full load option and then with a delta option..
Hope this Helps,
Prajeevan (XLNC) -
Please help me on the data selection - drill down
Can any one please help me,
I'm struggling with the data selection. I trid to finding the solution all the way but no hopes.
see below are my data sets:
1) from this table i have to plot piechart.
Division Name Percentage
AMESA 1.79%
ANZ 1.79%
Central 5.36%
Commercial 8.93%
Eastern Europe 1.79%
Greater China 3.57%
Italy 10.71%
Japan 35.71%
Latin America 12.50%
Mid Atlantic/South 1.79%
Northeast 3.57%
NY/NJ 1.79%
SE Asia 7.14%
TME 3.57%
2) this below table is having the data same as "diivsion" above and their coerponding "Product" with its counts.
Here i want plot the bar chart with product and its counts. and also this chart should display only the products for the division selection above.
I mean that, when the users clicks the particular "division" then the coreponding "products" should only be displayed on the bar chart.
Division Name Product Escalations
AMESA CLARiiON 1
ANZ Replication Manager 1
Central ControlCenter 1
Open Replicator 1
Symmetrix 1
Commercial CLARiiON
Disk Library 2
Celerra 1
PowerPath 1
Symmetrix 1
Eastern Europe Celerra 1
Greater China CLARiiON
RecoverPoint 1
Symmetrix 1
Italy CLARiiON 2
Disk Library 1
Invista 1
Networker 1
RecoverPoint 1
Japan PowerPath
CLARiiON 5
Disk Library 3
Symmetrix 3
Celerra 2
Replication Manager 2
Avamar 1
Centera 1
Connectrix 1
ControlCenter 1
I can't try using dynamic visibility with the pie chart and bar chart. because my dashboard is having multiple tabs so i want to use the dynamic visibility there.
any help appreciated.
Thanks,
rdc422
Edited by: rdc422 on Aug 24, 2009 12:18 PMRadha,
Looks like you are still facing problem with dynamic visibility, i had sent the xlf file to your email.
I created drill down for
Japan
Commercial
Central
Similarly you can do it for others.
-Anil -
How to check the data of an archived table.
I have archived a table created by me. I have executed the write program for the archiving object in SARA. Now how can check the data of my archived table.
Hello Vinod,
One thing to check in the customizing settings is your "Place File in Storage System" option. If you have selected the option to Store before deleting, the archive file will not be available for selection within the delete job until the store job has completed successfully.
As for where your archive file will be stored - there are a number of things to check. The archive write job will place the archive file in whatever filesystem you have set up within the /nFILE transaction. There is a logical file path (for example ARCHIVE_GLOBAL_PATH)where you "assign" the physical path (for example UNIX: /sapmnt/<SYSID>/archivefiles). The logical path is associated with a logical file name (for example ARCHIVE_DATA_FILE_WITH_ARCHIVE_LINK). This is the file name that is used within the customizing settings of the archive object.
Then, the file will be stored using the content repository you defined within the customizing settings as well. Depending on what you are using to store your files (IXOS, IBM Commonstore, SAP Content Server, that is where the file will be stored.
Hope this helps.
Regards,
Karin Tillotson -
How to get the data from a cluster table to BW
Dear All,
I want to extract the data from R/3 to BW by using 2 tables and one Cluster B2.
Actually my report contains some fields from PA2001, PA2002 and one cluster table B2 (Table ZES). Can I create View by using these 3 tables? If it is not possible how can I get the data from the cluster? Can I create generic datasource by using cluster tables directly?
In SE11 Transaction the Cluster (table ZES) is showing invalid table.
I referred some Forums, but no use.
Can any body tell me procedure to get the data from a cluster (table ZES) ?
Waiting for you results.
Thanks and regards
RajeshHI Siggi,
Thank you for your reply..
I am also planning to do FM to get the data. But it is saying that the Cluster table ZES does not exist (ZES is the the standard table, in SE11 also).
How can I use the Fields from the that table.?
What can I do now, can you please explain me about this point.
Waiting for your reply.
Thanks and Regards
Rajesh
Message was edited by:
rajesh -
I have downloaded and installed the latest version of numbers on my mac. Everytime I save and then try to reopen that document, I receive a message telling me that I need a new version of numbers. Also, when I try to sort the date column, it sorts out of order. The last version sorted fine.
Welcome to Apple Support Communities
When you install the new iWork version, the old iWork version is kept, so it looks like you are opening your old version.
To fix this, open a Finder window, choose Applications in the sidebar and drag the new Numbers version to the Dock, so you can access to it quickly. Open all documents from this version. I don't recommend you to delete the old Numbers version in case you need it.
Respecting to the second question, you will get better answers in the Numbers for OS X forum -
How to customize the data selection on a standard 2LIS_08TRTLP
Hi All,
on the datasource '2LIS_08TRTLP Shipment delivery per stage', I would need to filter on '0DEL_TYPE delivery type' but it is not part of the standard 'data selection' for this datasource.
I have some initial loading issue if I cannot filter directly at the datasource on a specific delivery_type.
How can I 'enhance' the data selection for this standard datasource with the addition of this new filtering condition on 'DEL_TYPE'
thanks in advance for your great support
DHNGGo to change mode of datasource using transaction code RSA6. uncheck the hide sel and customer field column.
Check the check box - del type and save it.
it will be available for selection and check it in rsa3
hope it helps you
mahantesh -
Error occurred in the data selection,If i do Repeat, then it is working fin
Hi Freinds,
Here is the error message,
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Details Tab:
Extraction (messages): Errors occurred
Error occurred in the data selection ....
If i do Repeat Delta, then it is working fine.
As it is a daily load, manually repeating the load from the past 10 days.
Have tried using program RS_TRANSTRU_ACTIVATE_ALL.
Any inputs pls.....Hi Friends,
Thanks for your valuable inputs, Problem is solved.
The Reason is that, there is a time difference in the r/3 system and bi system.
The tolerable time differene shud be only 60 seconds.
Basis guys took down time at the OS level and hav made the timers sync.....
The problem is on the source system GNP time differences
persists, which can cause the problem with delta upload .
Universal Time Coordinated UTC....: 1291187626
Date and time of database.........: 01.12.2010 12:46:59
Date and Time of R/3-Kernel.......: 01.12.2010 12:43:46
Date and Time of ABAP-Processor...: 01.12.2010 12:46:58
ABAP Time zone Setup ..............: 19800
Date and Time / local time ........: 01.12.2010 12:43:46
This leads to an exception of the delta processing, because this
tolerates a deviation of 60 seconds only (When the repeat is processed,
the "local time" in the ABAP is higher than the qrfc counter at the time when the delta was processed -> So a repeat works fine).
Please synchronize the timers like described in attached note 101726 and 741734 to eliminate the time difference .
With Regards
Badri Thiriveedhi. -
Error occured in the data selection while extract data from Source system
Hello Friends
i am facing Problem while extracting data to Biw System from SAP R/3 system
The error mesage is 'Error occured in the data selection '
i.e. Monitoring - Details tab - Extraction - With errorHi
The delta wil take the Last init selection for loading data in to the BW...
Did u check the IP at the Update tab is it the correct delta only.. or its a full..
better to go to the RSA3 and check the extractor in the Delta mode .. if u give ur delta mode it automatically takes the selction options.. so please try in RSA3..
regards
CK
PS: CHECK THE INIT SELECTIONS TOO or do an init with outdatatransfer and perform the delta...
Message was edited by:
BW Star -
How to fill the data of two different tables into one?
Hi Experts,
I have two tables named CDHDR and CDSHW(structure). I have extracted the data from these two tables through two function modules named CHANGEDDOCUMENT_HEADER and CHANGEDOCUMENT_POSITION. Now I have the data in to different tables.
These two tables neither has relationship with each other through any field nor have any field which exist in both. Can anyone tell me in this case what should be the process to take the data of both the tables into one table. How can I match the record of one table to another?
thanks a ton in advance.
Edited by: Moni Bindal on Apr 28, 2008 4:16 PM
Edited by: Alvaro Tejada Galindo on Apr 28, 2008 1:42 PMHye Bindal,
without a relation, it is not possible to club the data of 2 internal tables. More over it depends on the requirement as to y u should club to non related quantities in an internal table.
if you wish to do so, one thing is it has internal table which includes the strucute of the 2.
data: begin of ty_out,
first type first_structure,
second type second_structure,
end of ty_out.
data: itab type standard table of ty_out.
data: wa type ty_out.
loop into it1 into wa1.
move corresponding wa to wa1.
append wa to itab.
endloop.
loop into it2 into wa2.
move corresponding wa to wa2.
append wa to itab.
endloop.
now the internal table itab will have all the contents of it1 and it2.
<REMOVED BY MODERATOR>
Thanks,
Imran.
Edited by: Alvaro Tejada Galindo on Apr 28, 2008 1:43 PM
Maybe you are looking for
-
Is Safari the problem, or is it OSX?
Can anyone tell me why, when I select Safari and type Cmd+n (for a new window), it spins up BOTH my hard drives when they're asleep? I could see spinning up your startup drive since Safari was written by morons who made it impossible to select RAMdis
-
Homesharing on my iphone 4s stops half way
Homesharing on my iphone 4s stops when it come half way? What do I do wrong? :-) I have restarted router, logged in and out of homesharing on all my devices and macs. (I have a huge music library) Regards Tor
-
I know I post for help alot on this project... But I have decided to un-giveup on it... I am trying to have it send an email after a chat is finished using the blue button... to the right of the chat.. To use the program... it is full screen, use the
-
I have xp pro SP2 I downloaded firefox to open smartswipe it tells me I need sp3
I have smartswipe I also have IE6 but could not use smartswipe with it unless I downloaded SP3. I can use it with firefox 3.6 or higher (which I have downloaded), but when I download smartswipe in firefox and it saves in a document folder but when I
-
Help in adding values to particular vector in hasmap
Hi there, I have a question. I need to create a hashmap< Object, vector<Integers>> so that each object has vector of Integers associated with it. But I need to add the Integers to this hashmap in such a way that each Integer gets added to the vector