Sorted directories can't be copied-- the order is lost

I put this question in the regular Bridge Forun, but nobody was answering, so I thought it might be better here.
I cannot copy a sorted directory of images and have the new directory retain the sort order.
If I have all my images in a given directory sorted using Bridge, Bridge apparently creates a file called .bridgesort to keep track of the order. It's an XML file.
Even when I copy this .bridgesort file to the new directory, it still does not sort the images. Apparently in the .bridgesort file that I viewed using Windows Notepad, it references file names based on their creation date or whatever. Appended to the end of the filename is a long string of numbers that seem to be date and time and is critical in the use of the sort.
Is there a way to copy the directory of files and have the sort be retained? It's a lot of bogus work and not very well thought out by Adobe.
Thanks,
Mike

The drive is probably formatted for a Windows flavor that doesn't support files of 4GB+. If you're going to use the drive with both the Mac OS and Windows machines, you can format it as exFAT and you should have no problems. If you're going to use the drive exclusively on your Mac, format it as "Mac OS Extended (Journaled)" using Disk Utility.
Good luck,
Clinton
MacBook Pro (15-inch Late 2011), OS X 10.??, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

Similar Messages

  • How can I back up the iPhoto library when iPhoto won't open and I can't simply copy the iPhoto library packet because "some of the data in the packet cannot be read from or written to"?

    How can I back up the iPhoto library when iPhoto won't open and I can't simply copy the iPhoto library packet because "some of the data canny be read from or written to"?

    Regarding not being able to open iPhoto.  As a test  launch iPhoto with the Option key held down and create a new, test library. Were you able to create a new library?
    If so then your current library is damaged and needs to be repaired.
    Apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Since only one option can be run at a time start
    with Option #4 and then #1 as needed.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • I ordered iphone 6 on 15 oct and delivery date will be from 3 nov-6nov. i'll travel on 7 nov morning, am worried to receive the order late.. can you please expedite the order?

    i ordered iphone 6 on 15 oct and delivery date will be from 3 nov-6nov. i'll travel on 7 nov morning, am worried to receive the order late.. can you please expedite the order?

    No. Because we are not Apple employees. In fact there is no one from Apple in this forum. Contact Apple directly via phone. Use the "Contact Us" link at the bottom of this page to find the phone listing.

  • CS-No configurable material can be assigned to the order

    Hi,
    Can someone please assist me with the following problem? I am creating a Refurbishment Order in Customer Service using an Equipment created by an action in VMS.  The material maintained in the Equipment is a configuration material and I get an error "No configurable material can be assigned to the order" when I use this equipment to create the order. 
    Your assistance is highly appreciated.
    Regards
    Vogie

    Dear Tiaan,
    We have exactly the same issue. Apparently SAP has blocked this posibility. The SAP solution doens't support configurable materials on Service Orders goes for 4.6, 4.7 and 6.0. To my understanding this is a very big miss in the SAP solution. I hope that we by listing it here can inform SAP that it makes no business sence not to be able to provide service on configurables materials. We will most likely go for a modification in the source, since SAP doesn't support this.
    Best Regards
    Klaus

  • Copy controls is not copying the order reason and PO numbe and PO date

    Hi All,
    When i create credit memo request with reference to Invoice, it is not copying the order reason PO number and PO date to credit memo request from invoice.
    Please let me konw what changes do i need to copy that.
    Thanks in advance.

    Hi,
    Check below link
    copy purchase order number and date from one sales order to other sales ord
    Hope it'll help you !
    Best regards,
    Anupa

  • What I have to configure in my pc �so I can selecting and copy the ja

    Before i could copy the content of my java console with selecting it and pressing ctrl + c...but now�I can�t :(
    What I have to configure in my pc ...so I can selecting and copy the java console content in a text file?
    Thanks in advance
    Mary

    Excuse me....but i don't have success in that....
    I am using win 2000 server
    jdk 1.4.1.01
    java plug in 1.4.1.01
    I can open the java console.....
    if i select the text and press right clic ....i don't obtain any menus.....
    if i give clic in the title bar (of my java console) i obtain a menu wiht the following obtions:
    Mover
    Tama�o
    Minimizar
    Maximizar
    Cerrar Alt+F4
    And ctrol+c doesn't working.....
    Select the text and press enter...and in the text editor press control+v...and i dont obtain nothing.....:(
    Some ideas or suggestions please?.....
    Thnaks in advance....
    Mary

  • Can you pre-arange the order of songs?

    Hi,
    I'm thinking of getting an iPod shuffle. I just have a little question, before I do: Can you pre-arange the order of songs, before you take it off the dock?
    I want to be able to choose which songs I'll listen to before I set off. So can you change the order of them from iTunes?
    Thanks alot,
    Lachlan
    Mac mini Mac OS X (10.4.8)

    Hi,
    I'm thinking of getting an iPod shuffle. I just have
    a little question, before I do: Can you pre-arange
    the order of songs, before you take it off the dock?
    I want to be able to choose which songs I'll listen
    to before I set off. So can you change the order of
    them from iTunes?
    Yes... and you can set the Shuffle to play them in the order you arrange them.
    Read more about the Shuffle and iTunes:
    http://docs.info.apple.com/article.html?artnum=303634

  • Why can't I change the order of songs in my iTunes library?

    If I create a playlist I can change the order of songs but I can't change the order in the Library. Can anyone help me?
    Thanks

    That's the normal intended behaviour of the Library. I'm not exactly sure why it is, but I guess it's to make it clear to users that if they want to "fine tune" the tracks they should use a playlist (just like you can't use the burn button in the library).
    I'm sure you've noticed that you can still sort the library by clicking the headings.

  • Why can't I change the order of the songs on a playlist on my iPhone?

    When I try to change the order of the songs in my playlists, my iPhone continues to put the song back where it started.  I can add songs all day long, but I cannot change the order.  The other problem I am having is the same iPhone will, instead of moving the song I tap and drag, will move a different song.  It is usually one of the songs either above or below the one I tap, but not the one that I see moving when I tap and hold. 
    Any thoughts would be appreciated.

    That's the normal intended behaviour of the Library. I'm not exactly sure why it is, but I guess it's to make it clear to users that if they want to "fine tune" the tracks they should use a playlist (just like you can't use the burn button in the library).
    I'm sure you've noticed that you can still sort the library by clicking the headings.

  • HT2376 How do i retrieve a lost key code for Pro if it is older than 18 months ? which is the longest you can look at on the orders history page.

    I Upgraded to quicktime pro years ago on my pc , then when i got a mac i purchased another copy for mac. I ve now gone back to pc and want to retrieve my old key code. The check your order history only goes back 18 months and i think i got mine about 4 years ago . Any advice ? or do i need to buy another copy . Cheers

    Regardless of what any of us think, the fact is that Apple no longer provides lookup of orders older than 18 months. Why they chose this none of us here can say, but that's what they have decided. So it's no longer possible to look up a QuickTime key purchased more than 18 months ago. If the user failed to keep a copy of the email or otherwise record the key, as Apple themselves advise, then a new QT Pro key will be required.
    Regards.

  • Copy Japanese text without dots: why can't I copy the text in reader without having actual text copied, not dots?

    I have tried to download japanese adobe, yet I can only have one adobe file, as the computer stops download. Is there a way to allow multiple adobe for each language you need? I read about OCR and DRM, yet the apps on the itunes store are only for ipads or iphones. I only have a mac book. Does Ipad include mac book and is it worth buying for one copy? I also thought that Adobe would allow for such copy of simple text with multiple language adobe. However, the only reader available is the one from 2011, so it is not up to date and is rejected by my computer as well.
    Any thoughts or recommendation? Is there a website or google that has simple copy paste for japanese into a readable file for adobe reader in English?

    Are you trying to get Adobe Reader for desktop/mac?

  • The light on my apple tv is blinking furiously.  i've held down the menu button, plugged and unplugged it, and just tried restoring it via micro usb.  but the restore downloads then says it can't finish because it can't write to the disc.  lost lost

    how do i get the light on my apple tv to stop blinking?  have tried all the recommended methods, including holding down "menu" on remote, plugging and unplugging etc.  when i try to restore via itunes it downloads then when it's done says it can't write to disc.

    Hi lostinmedford,
    Welcome to the Apple Support Communities!
    I understand that the light is quickly flashing on your Apple TV and you are unable to restore it. According to the attached article, you are working through the correct steps by trying to reset and restore the Apple TV. In this situation, if the restore did not resolve the issue, it may be necessary to have the Apple TV evaluated for service by using the link in the attached article. 
    Apple TV: About the status light - Apple Support
    Flashes quickly
    Having issues. Try restarting or waking your Apple TV. If your Apple TV does not start up properly, you might need to reset the Apple TV or restore it to factory settings. See Apple TV (2nd and 3rd generation): Restoring your Apple TV. If this does not resolve the issue, refer to the Service FAQ for additional assistance.
    Best regards,
    Joe

  • How can I get back the information I lost when upgrading my iPhone version?

    Before installing the 3.0 OS on my iPhone 3G, I stored important information in an app I downloaded from the App Store. When I installed the new OS, all my information was lost. I tried to restore my iPhone to my last backup, but nothing, my iPhone still ran on 3.0 and my information was gone.
    Please help me, I really, really need my information back.

    Have you tried contacting the developer of the app for help?

  • How can I copy the price from a reference invoice

    Hi,
    How can I programmatically copy the price from a reference invoice to the orders which I am creating using FM SD_SALESDOCUMENT_CREATE.
    Regards,
    Tanmay

    Hi,
    Try using the BAPI BAPI_SALESDOCU_CREATEFROMDATA1.
    In that pass REFOBJECTTYPE
    REFOBJECTKEY
    REFDOCTYPE
    to create from an invoice..
    Thanks,
    Naren

  • How can i copy the text in cr11 screen dynamically.

    Hi,
    In cr8 with VB, i can able to copy the text dynamically by using rigth click on cr8 screen and click copy. And able to paste the text in notepad.
    In same way,Rightckick option is not available in cr11 screen with vb.net.For that i created "Contextmenustrip".Now i can able to rightclick and click the copy button.But the text was not able to paste.
    Please help anyone.
    Thanks...

    Sample code for the Winform Viewer event:
    C# sample code:
    namespace CRXIR2_VS2005_GetReportObjectClicked
        public partial class Form1 : Form
            ReportDocument crReport;
            public Form1()
                InitializeComponent();
                // Create an instance of the report
                crReport = new CrystalReport1();
                crystalReportViewer1.ReportSource = crReport;
                    // Ensure you are using CR XI Release 2 and at minimum BusinessObjects XI Release 2 Service Pack 1 (SP1)
                    // and BusinessObjects XI Release 2 Monthly Hot Fix 1 (MHF1)
            private void crystalReportViewer1_ClickPage(object sender, CrystalDecisions.Windows.Forms.PageMouseEventArgs e)
                // Collect the report object name and type.
                string msg = "Report Object: " + e.ObjectInfo.Name.ToString()
                    + " (" + e.ObjectInfo.ObjectType.ToString() + ")";
                // Some report objects won't have text properties; verify that the property isn't null
                if (e.ObjectInfo.Text != null)
                    msg += "... Text: " + e.ObjectInfo.Text.ToString();
                // Display the collected information in a message box.
                MessageBox.Show(msg);
             private void crystalReportViewer1_Load(object sender, EventArgs e)

Maybe you are looking for