Sorting Dash board prompt
Hi all
I have a month Prompt its Char Ex. values are '1','2','3','4','5',...'12' now in dashboard its showing as 1,10,11,12,2,3,4...9
I want to sort it and show 'January' instead of '1' and 'Feb' instead of '2' so on........
AND even i show 'January' in the drop down of my Prompt i need to pass filter value to my "isprompted" field as '01' which was the actual value ..
any ideas friends
any help is appreciated.
Thanks
SangO
Hi There
For sorting use the technique described in the earlier reply. Regarding choosing January and passing 1 is not possible, as in OBIEE the drop down don't work on code and value concept, whatever you see is what gets passed onto the prompt. The ideas is to have fact join with dimension using key column, that should improvise the performance.
Hope this helps
Sunil S Ranka
Blog :: http://sranka.wordpress.com
"Superior BI is the antidote to Business Failure"
Similar Messages
-
Dash Board Prompt and it's dashboard should be display at same page.
Dear guys ,
am newbie to obiee .am using obiee 10.1.3.am develping dashboard with prompt but a little problem is here when i run dashboard
prompt are displayed ,i give values to them as i press go button prompt page hide and my dashboard page is displayed.i want prompt should be view in upper section and dashboard under it not at second screen.so in this way i use back option and then change value of prompt and then go for dashboard result.
regards
shakeel khanPrompt in Answers in very rarely used or almost never used..
You can create the Dashboard Prompt for the column you required.
and in your Answers report, apply, 'is prompted' filter on that column.
In the dashboard, add the dashboard prompt and Answers request..
Regards,
Raghu -
Hi everyone,
I have created a dashboard prompt with the following.
1.) Code
2.) ID.
Use needs to select the code and ID for to which are used as filters of requests used in the dashboard.
"Code" --- This is varchar which is having a control as drop down list, the values of which are populated from SQL Results. In the SQL i am using a session variable which is set as soon as user logs in.
"ID" -- This is a number which is having a control as drop down list, the values are using "Constrain" --- based on the code from drop down.
The issues is when a user logs in for whom the "Code" values from SQL is null, the ID is showing all values, but according to the requirement nothing should be shown and user should not be allowed to proceed.
How can this is achieved.Kumar,
What do you mean exactly by "multiple analysis" ?
Also elaborate what exactly you mean by "bring Dashboard prompt on to excel" ?
1. are you trying to get only the selections made through the prompt into excel?
2. are you trying to get the prompt (form) into excel?
A workaround for point 1 above is feasible through narrative view, presentation variables,...
-bifacts :-)
http://www.obinotes.com -
i create one dashboard with 10
pages in that i provide 1
dashboardromt
and 9page prompts
now my ? is dashboard prompt reflect
only on 10 page or all?So when you specify a dashboard prompt as scope-> ‘page’, what this does is say that any selections made for this prompt will not be used to set other prompts within the dashboard. When you specify a dashboard prompt’s scope-> ‘dashboard’, this says that any selection of this prompt will be reflected in other prompts within the dashboard. I think people get it confused and think that the ‘page’ scope shields the prompt from receiving selections from other ‘dashboard’ scope prompts; but, it does not. The scope is only there to specify if the selection within the prompt will be local (page) or global (dashboard).
-
Hello All,
I has a requirement on dates for the OBIEE Dashboard. I have a date parameter.... when the user selects a date... i need to get all the records that were between the date passed and 15 days past to that date
For Ex: If the user selects 15-01-2010 i need to get all the dates from 01-01-2010 to 15-01-2010
how can i do this..
Please let me know thanx.
Kiranhi kiran,
Add a date column to your report,and convert that one to sql by cocking on
Filter--Advanced-->convert this filter to sql
and in sql use the following syntax
Periods.Week(date column) between TimeStampAdd(SQL_TSI_DAY, -15, CURRENT_DATE) and CURRENT_DATE
thanks,
saichand.v -
Dash board report for make to stock scenario?
hi friends,
Here i am having a problem that, I need to do the dash board report to display the sales and production values (quanty s , value) with particular date comparission.
some more detailed.
my client need the report with day wise production and sales values with respective of material number. I can make the report if it is make to order situation. but , this is make to stock situation. and also mentioned that values should match the G\L Account ,ref: fs10n Transaction.
plz help out ......
rewards in advance.
Regards,
Naveen MThe definition of Organization structure might not allow you to do so
Please go throught the following link in detail http://help.sap.com/saphelp_47x200/helpdata/en/f4/7d3f9344af11d182b40000e829fbfe/frameset.htm
Summary from the above link is as mentioned below
You can plan material requirements at plant level or for different MRP areas. With MRP at plant level, the system adds together stocks from all of the individual storage locations, with the exception of individual customer stock, to determine total plant stock. The requirements are combined in the planning run and procurement elements are created for these pegged requirements with unknown sources. Individual storage locations can be planned separately or be excluded from planning.
In the case of material requirements planning on an MRP area level, only the stocks from the storage locations or subcontractor assigned to the respective MRP area are taken into account. Only the requirements in this MRP area are combined and procurement elements are created for them. This enables you to plan material requirements specifically for certain areas. -
Crystal Report and Dash Board Report templates
Hi All,
I was wondering can you help to find out few Crystal report and Dash Board report Templates for SAP Business One.
This in order to give demo to customers.
Link pointing to same is good enough. I have authorization to SAP portal and I have searched through it found only two template of Crystal report no Dash report templates.
Regards,
AdityaHi Adit,
For CR demo, you can use this youtube CR demo:
http://www.youtube.com/watch?v=bKLtTDNpQMM
For the CR sample templates donwload, you can check this link:
http://scn.sap.com/thread/1239521
If you want to create the template by your self, you can check this link:
http://scn.sap.com/thread/1627677
For dashboard sample, you can download from this link:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e0bd3605-e1ad-2d10-488d-f2e4fede1d46
JimM -
Error while executing the BO Dash Board
Dear Sapians
i am facing the following issues in the BO while execute the Dash Board.
But the authorization working fine in BW side . In the filter of the BO Dash Board i am getting the correct values which i was restricted in the BW side.
Please help me to solve this.
Thanks
HajiHi Vamsi.
The exactly erro refers to a problems when you try upgrade from these version to 11.5.10.
Can you read this note and apply solution? The note refers a patch, but the problem is the same.
After Patch 4334965, adstrtal.sh & adstpall.sh is failing with errors [ID 360046.1]
BR Rafael Ceolim -
Error while running script HyperV - Dash Board - VM and Storage Report
Hi Team,
I am getting below error while running HyperV dashoboard monitor & storage report script from Technet script library.
HyperV - Dash Board - VM and Storage Report
Finished processing VM - xxxx
Processing VM - xxxxx
Get-VHD : Unable to cast COM object of type 'System.__ComObject' to interface type 'System.Management.IWbemServices'.
This operation failed because the QueryInterface call on the COM component for the interface with IID
'{9556DC99-828C-11CF-A37E-00AA003240C7}' failed due to the following error: The requested object does not exist.
(Exception from HRESULT: 0x80010114).
At C:\Scripts\HyperV-DashBoard-v2.1.ps1:210 char:10
+ If (Get-VHD -VMID $vmDetails.VMID -ComputerName $cNodes.Name[$i])
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Get-VHD], InvalidCastException
+ FullyQualifiedErrorId : Unspecified,Microsoft.Vhd.PowerShell.GetVhdCommand
Get-VMNetworkAdapter : Unable to cast COM object of type 'System.__ComObject' to interface type
'System.Management.IWbemServices'. This operation failed because the QueryInterface call on the COM component for the
interface with IID '{9556DC99-828C-11CF-A37E-00AA003240C7}' failed due to the following error: The requested object
does not exist. (Exception from HRESULT: 0x80010114).
At C:\Scripts\HyperV-DashBoard-v2.1.ps1:238 char:12
+ If ((Get-VMNetworkAdapter -VMName $vmDetails.Name -ComputerName $cNodes.Na ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Get-VMNetworkAdapter], InvalidCastException
+ FullyQualifiedErrorId : Unspecified,Microsoft.HyperV.PowerShell.Commands.GetVMNetworkAdapterCommandHi ,
I found that the problem had been solved in the script blog by your self :
http://gallery.technet.microsoft.com/scriptcenter/HyperV-Dash-Board-VM-Disk-299bac7d/view/Discussions#content
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
How can we show percentages in BO Dash board Manager(PMDM)
Hi ,
Please help me to find the option in Dash Board Manager to show percentages of metrics.
Regards,
TejaHello josborne,
i feel for you as a year ago i was undergoing the same problem. I was using Basler cameras for bar code reading and i was using two of them at a time. i was getting the same error. In my case the issue was resolved after much pain. i changed the PCI cards, switched between a lot of softwares and hardwares to get the required results. In the end my issue came down to the Fire wire cable. I was using a very cheap cable. Perhaps this is the only thing i can add that you might be using some non+standard fire wire cable.
perhaps you can try replacing it and then see the results.
Regards
Asad Tirmizi
Design Engineer
Institute of Avionics and Aeronautics
" Its never too late to be, what u want to be"
Using LabVIEW 8.2 -
Including an link to an help file(*.chm) in dash board
hi,
is it possible to place an *.chm file(help file) in the dash board .
i tried but OBI is not opening it up in that format.
can some one give me an solution to this.
thanks'.chm' is a Microsoft Compiled Help file that only works in Microsoft Explorer. You are advised to convert it to a friendlier format like HTML.
As per Microsoft, due to a remote code execution vulnerability, you cannot open .chm from a URL. However there are some workarounds in the link below:
http://support.microsoft.com/kb/896054
Coming back to Oracle BI, you could open the link in a separate window, and ask users to download the chm. Once downloaded locally, the chm file should work fine.
HTH,
Nilanshu -
Management Dash Board creation in SAP BI 7.0
Hi Experts,
Plz give me the construction procedure of Management Dash Board creation in SAP BI 7.0.
Any material/links/documents/suggestions with u plz share with me.
Any Pointers will really appriciated.
Thanks in advance.
Regards,
Chinna.Hi reddy
go through these help links
http://help.sap.com/saphelp_nw04s/helpdata/en/80/1a637fe07211d2acb80000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/23/054e3ce0f9fe3fe10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
will surely helps u
Regards
Kiran
*Do assign points for helpfull answers,its the way of saying thanks in sdn
Message was edited by: ravi kiran naalla -
Integration of OBIEE Dash Boards with BPM Process
Hi ,
Could you please help me in integrating OBIEE Dash Boards with BPM . I thought of using 2 ways :
1) Integrating OBIEE with ADF First and then Integrating ADF with BPM . Its a long process but any other way if any one can help me .
2) Integrating OBIEE with BPM directly by generating webservices . but i couldnt get any options to generate the webservices for OBIEE .
Can anyone please guide me on this .
Thank you,
Sashank P.Check these links may help you.
http://docs.oracle.com/cd/E21764_01/bi.1111/e16364/actions.htm
http://gerardnico.com/wiki/ide/eclipse/eclipse_how_to_consume_a_webservice_with_wtp#the_result
http://gerardnico.com/wiki/dat/obiee/web_service -
Dash board and app store in the same window
And I cant use either.. Untill I deleted all the wigets and then I could use the app store... How do I get the app store to launch seperatly from my dash board in Lion..
If it says the user id and passcode is not correct then it isn't, even if you think it is. Or someone has hacked your ID and changed your password.
-
Daily Shift wise Report, Dash board reports
Dear all
With refering to the present project in 4.7 version the customer requirement is below.
1. Shift wise maintenance report - Here they are presently maintaining Section, shift, Date, From time, To time , Job descriptions, attenede by remarks.
In another coloum in same sheet they needs
From time, To time , Delay descriptions, attenede by remarks.
Then thirs is communication for next shift- there they are writing the texts which they are saying to next shift guys.
2. Another what they wants is regularly top managers wants to see the maintenance details ( prev order, down time, consumption cost etc ) in their system dash board(screen) . they are not willing to go sap. How to do this thro .Net or workflow . This is report should be fulfiiled by us.
3 Shutdown Planning report- here they are maintaining the date wise job hours in graphical form. How we can activate this
I request you please have some idea about this.Dear Nandip/Iftikar,
Dear thanks 4 ur answers. I have asked the same with our abapers , but they are new and not able to help. i have well tried with notification customer table addition in spro. but its not helping as required.
The thing is i cant prepare the specs for this report. Example for shift we can create Z table. But Processing job description, Action taken, delay reasons how i can prepare the specs.
I request you to share your Program or specs please then its better for us. please send at thennarasu_kandasami@ welspun.com
Edited by: thenna arasu on Jun 2, 2008 2:12 PM
Maybe you are looking for
-
Why can't I connect to iCloud on my macbook pro?
Why can't I connect to iCloud on my macbook pro?
-
Should web images be sharpened or does Photoshop just "handle" jpegs better now & it's unnecessary
We have between 3-4MB "full size" print-quality product images that get downsized to about 204px wide x 300, and then proportionally smaller yet to 135 wide and 100 wide for our website. The graphic designers I work with say there's no need to be sha
-
Insert into oracle DB using vb2005
I have a form that has click button1. The problem with this code is after insert command something should be inserted into oracle DB but nothing there(so how to execute insert command and commit it using VB2005), any suggestion should refer to the co
-
Increase In IPod Classic Drive Size
This may been asked before. I have looked but couldn't see anything. Will Apple ever incresae the drive size of this machine? Or might they bring out a larger size new IPod/
-
Does anyone know where I can find Canadian GIS datasets, like US Census Tiger Files, that I can download and load for free?