Sorting flowchart

Can any one help me in drawing a flowchart according to the given small sorting procedure>>
Procedure sorting(string A[])
Use variables :
dISPLAY"The sorted elemenrs are"
For(i=0,i<length of A, i=i+1)
for(j=j+1,j<length of AS, j=j+1)
if(A[j]<(A<0)
temp=A[i]
A[i]=A[j]
A[j]=temp
end if
end for
Display A[i]
End for
End procedure
plz guys help me out i jjust want a simple flowchat for it buthing else plz plz

public void sorting(Graphics g,String[] A) {
      String[] AS=new String[A.length];
      g.drawString("The sorted elements are " , 50,50);
      for(int i=0;i<A.length;i++) {
           for(int j=0;j<AS.length;j++) {
                //your codes
                if(condition) {
}Hope it helps

Similar Messages

Basic flowcharting/project-management app?

As a small business owner, I'm discovering that lists are just not enough to help me track my deliverables, deadlines, and dependencies.
I'd love an app that graphically displays my short- and medium-term goals and sub-tasks - basically a very scaled down version of MS Project.
The main contender I've found so far is Pagico - I'm trying out the free version. Pagico's flowchart functionality, while much better than nothing, seems limited. I don't think it manages dependencies, and it seems to look ahead only one month.
What other low end flowchart and project management apps exist for the Mac? Surely there must be something between Pagico's $20 price point and the professional $150+ project management tools?
Thanks.

If you happen to use Microsoft Office 2004, the Project Manager in Entourage is actually quite good. I started using it a few weeks ago.
There are a bunch of open source web based project managers that you could setup pretty easily on your system as well. That with the use of MAMP, you could easily setup something up for free in no time.
I did run across this this which was directed towards writers, when i was looking for some sort of project manager a few weeks ago.
http://www.bartastechnologies.com/products/copywrite/
Good luck

Sorting on a Formula field

Everytime I try to do a sort on the formula field below, I can't sort on the field. It doesn't even show the field in the explorer window to sort on. The formula is below.
Sum ({fct_CurrentSales.Cases}, {@upc}) /
(tonumber(Maximum ({vw_dim_Product.CA_MPN_JMelBoxesPerPallet}, {@upc}))) / {Command.Previous Fiscal Month}

Sorting is done at record level and you're using a sum in your formula as well as a maximum value. Not sure about what is being done in the {@upc} formula but it may be affecting it as well.
Look at your user guide and look up the multiple passes CR makes and what is done in each pass.
(I used to keep a copy of the multiple pass flowchart on the wall above my computer as it contains good information on what can be done and when during the report generation.)
Sum ({fct_CurrentSales.Cases}, {@upc}) /
(tonumber(Maximum ({vw_dim_Product.CA_MPN_JMelBoxesPerPallet}, {@upc}))) / {Command.Previous Fiscal Month}

In Photoshop Express, cannot sort images in album by filename in thumbnail view (for slideshow)l.

In Photoshop Express, I want images to appear sorted by filename. In the "view as a table" it sorts fine. When I revert to the thumbnail view, the arrangement is random. The dropdown "show" list does not offer an option for showing by filename. If I select the"custom" option, it means I would need to sort 300 images by filename MANUALLY (!!!), a job that a computer does in milliseconds. Anyone with a solution? Thanks.

fwiw, with my images in the 'Folder Location' view the photos are in order by their Windows filename. That is the same order as the hardcopy album the photos came from. So I then created a PSE Album. I selected all my photos and moved them into that album. The order of the pictures was retained in the Album. That worked out great. I wanted my PSE images to be in the same order. I thought I would do it with tags. But creating an album seems to work just fine.

Unable to capture the adf table column sort icons using open script tool

Hi All,
I am new to OATS and I am trying to create script for testing ADF application using open script tool. I face issues in recording two events.
1. I am unable to record the event of clicking adf table column sort icons that exist on the column header. I tried to use the capture tool, but that couldn't help me.
2. The second issue is I am unable to capture the panel header text. The component can be identified but I was not able to identify the supporting attribute for the header text.

Hi keerthi,
1. I have pasted the code for the first issue
web
                         .button(
                                   122,
                                   "/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1824fhkchs_6']/web:form[@id='pt1:_UISform1' or @name='pt1:_UISform1' or @index='0']/web:button[@id='pt1:MA:0:n1:1:pt1:qryId1::search' or @value='Search' or @index='3']")
                         .click();
                    adf
                    .table(
                              "/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1c9nk1ryzv_6']/web:ADFTable[@absoluteLocator='pt1:MA:n1:pt1:pnlcltn:resId1']")
                    .columnSort("Ascending", "Name" );
     }

How to sort out different issues on Satellite A505-S6973

Can anyone tell me, if the warranty period on my laptop has not passed, can i return my laptop to toshiba and have all my issues sorted out. Would there be a cost to do whatever repairs software related needs be done and how i am supposed to go about it because my laptop is beginning to have all sorts of little errors, i noticed that my harddrive has 156gb used although i have about 60 gigs in use.
A couple multimedia buttons aren't working but i touch them, my touchpad doesn't turn off with the hard button unless i turn it off using the FN key and my processor runs low but when i use a program i see it's reaching between 85 to 100% utilization.
I really like this laptop, but the issues i'm having i highly doubt it should operate this way.

Hi mate
Software issues are not covered by warranty!
This means that you will have to pay for everything if the ASP technician would not find any problems!
This is why you should recover the notebook in order to check if its only a software related issue.
>A couple multimedia buttons aren't working but i touch them, my touchpad doesn't turn off with the hard button unless i turn it off using the FN key
Reinstall the VAP (value added package) and flash cards utility
>my processor runs low but when i use a program i see it's reaching between 85 to 100% utilization.
This is not a bug or hardware problem. You will notice this CPU behavior because the CPU supports an feature which helps to save the power and reduce the heat dissipation

Issue With Page Break When Sorting is also applied on group

Hi
I am facing an issue with Page break only when I have sorting applied on the grouping that I have in the template.
The following is the sample XML
<ROWSET>
<ROW>
<GRE>org1</GRE>
<ORGANIZATION>Accounts</ORGANIZATION>
<FULL_NAME>test1,</FULL_NAME>
<ELEMENT_NAME>TEST BONUS</ELEMENT_NAME>
<CLASSIFICATION>Supplemental Earnings</CLASSIFICATION>
<RUN_VALUE>250</RUN_VALUE>
<MONTH_VALUE>500</MONTH_VALUE>
<QUARTER_VALUE>500</QUARTER_VALUE>
<YEAR_VALUE>500</YEAR_VALUE>
</ROW>
<ROW>
<GRE>org1</GRE>
<ORGANIZATION>Finance</ORGANIZATION>
<FULL_NAME>test2</FULL_NAME>
<ELEMENT_NAME>VOLUNTARY AD AND D</ELEMENT_NAME>
<CLASSIFICATION>Voluntary Deductions</CLASSIFICATION>
<RUN_VALUE>5.19</RUN_VALUE>
<MONTH_VALUE>10.38</MONTH_VALUE>
<QUARTER_VALUE>10.38</QUARTER_VALUE>
<YEAR_VALUE>10.38</YEAR_VALUE>
</ROW>
<ROW>
<GRE>org1</GRE>
<ORGANIZATION>Finance</ORGANIZATION>
<FULL_NAME>test3</FULL_NAME>
<ELEMENT_NAME>HMO MEDICAL</ELEMENT_NAME>
<CLASSIFICATION>Pre-Tax Deductions</CLASSIFICATION>
<RUN_VALUE>19.67</RUN_VALUE>
<MONTH_VALUE>39.34</MONTH_VALUE>
<QUARTER_VALUE>39.34</QUARTER_VALUE>
<YEAR_VALUE>39.34</YEAR_VALUE>
</ROW>
<ROW>
<GRE>org1</GRE>
<ORGANIZATION>Finance</ORGANIZATION>
<FULL_NAME>test4</FULL_NAME>
<ELEMENT_NAME>PENSION NR DC</ELEMENT_NAME>
<CLASSIFICATION>Pre-Tax Deductions</CLASSIFICATION>
<RUN_VALUE>0</RUN_VALUE>
<MONTH_VALUE>360</MONTH_VALUE>
<QUARTER_VALUE>360</QUARTER_VALUE>
<YEAR_VALUE>360</YEAR_VALUE>
</ROW>
</ROWSET>
In the template I group the data based on CLASSIFICATION and then sort on the same column CLASSIFICATION. I have a page-break applied for every group.
When I generate the PDF, I am not getting the page-breaks for every group. Instead some of them are displayed in the same page.
But when I remove the sorting that I had in the template on the column CLASSIFICATION, I am getting the output in the desired way but not in a sorted order.
kumar

Hi All,
I am using MS-WORD 2007 and BI Publisher desktop 10.1.3.3.3.
When I use split-by-page-break, splitting is performed for every line .. but not for group of lines.
Can anybody throw some light on this?
FYI...
I am using this code:
?if: position() mod 6= 0?
?split-by-page-break:?
?end if?
(Of course with in tags)
in G_LINES loop.
Can anybody help me out :-(
--Saritha

ALV . How to remove the sort buttons on toolbar in ALV report?

Hi,experts
As you know, in default case , the alv report will display two sort buttons(ascending ,descending) on its toolbar , So How to remove the sort buttons on toolbar in ALV report?
Thanks for your help .

Hi guixin,
1. Before calling REUSE_ALV_LIST_DISPLAY
2. Write this code :
data : excl type SLIS_T_EXTAB.
data : exclwa type SLIS_EXTAB.
exclwa = '&OUP'.
append exclwa to excl.
exclwa = '&ODN'.
append exclwa to excl.
3. Then while calling the FM,
pass this parameter also .
IT_EXCLUDING = excl
It will work fantastic.
regards,
amit m.

Field should not display in the subtotal row in ALV report after sorting .

we have a requirement, after sorting and subtotaling, the output in ALV is -
vbeln        amount1 amount2 amount3
123           11              12            13
123           12             13             14
123           23             25             27
133           11              12            13
133           12             13             14
133           23             25             27
Now the customer wants the ALV outpput in this fashion -
123           11              12            13
123           12             13             14
                 23             25             27    --->123 (vbeln) should not come in subtotaling row
133           11              12            13
133           12             13             14
                  23             25             27--->133(vbeln) should not come in subtotaling row

Hi,
if it helps you could create a hierachy. In this way you can define the field catalog for the lines and for the subtotal columns. The only thing is that you would always show the subtotal rows.
You have references of hierachy alvs in
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c060fcb4-2c62-2b10-d2b2-f32407a5cc6f
ALV Hierarchy
alv hierarchy
In this case it also sorts
Sorting for ALV hierarchy
I hope it helps.
Edited by: Oscar Pecharroman on Aug 2, 2010 1:13 PM

Sorting not working correctly for date field in alv report

Hi All,
My report displays many rows also containing date type fields of bldat,budat .
When I sort the report selecting field of type bldat budat the sorting is not correct for the year.
Ex:
Invoice doc dat
01-25-2011
01-21-2011
02-02-2011
10-25-2010
11-20-2010
If I use ascending then it is sorted as :
Invoice doc dat
01-21-2011
01-25-2011
02-02-2011
10-20-2010
10-25-2010
Why the sorting is not working correct for year.(2010 records should have been first).
The field wa_tab-bldat is of type char10.
It is populated as wa_tab-bldat = bsak-bldat.
Kindly suggest what can be done.

The field wa_tab-bldat is of type char10
Then what it does is correct.
Refer to type datum...it will work

Sort field in ALV report

Hi Expert,
IN ALV report using RESUE_ALV_GRID_DISPLAY . I want to sort the second field of ALV output . In this function module RESUE_ALV_GRID_DISPLAY using event PF_STATUS . so can u tell me how sort the second field .
Regards
Bhabani

Hi,
check the fallowing code
IT_SORT TYPE SLIS_T_SORTINFO_ALV,
WA_SORT TYPE slis_sortinfo_alv,
****SORT LABELS AT RUN TIME
WA_SORT-TABNAME = 'IT_FINAL1'.
WA_SORT-FIELDNAME = 'BUDAT'.
WA_SORT-UP = 'X'.
WA_SORT-GROUP = 'X'.
WA_SORT-subtot = 'X'.
APPEND WA_SORT TO IT_SORT.
CLEAR WA_SORT.
WA_SORT-TABNAME = 'IT_FINAL1'.
WA_SORT-FIELDNAME = 'MATNR'.
WA_SORT-UP = 'X'.
WA_SORT-GROUP = 'X'.
WA_SORT-subtot = 'X'.
APPEND WA_SORT TO IT_SORT.
CLEAR WA_SORT.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      I_CALLBACK_PROGRAM               = SY-REPID
      I_CALLBACK_TOP_OF_PAGE           = 'TOP_OF_PAGE'
      IS_LAYOUT                        = LAYOUT
      IT_FIELDCAT                      = IT_FIELDCAT
      IT_SORT                          = IT_SORT
      I_DEFAULT                        = 'X'
      I_SAVE                           = 'U'
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
     TABLES
       T_OUTTAB                        = IT_FINAL1
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards
Nandan.N

Sorting in 6i and 10g reports

Hello All,
I am running 6i and 10g reports against a 10g database.
I ran one of the 6i report and it generated a report in one sorting ordear
and when i ran the same report on 10g ,it generated the report in ddifferent order.
Both the reports r run against the same 10g database.
The order by clause on the columns of the records r identical.
Now i wanted to understand how it is sorting in different orders in both 6i and 10g reports?
Thanks,
Ranz

Hi,
Please note the fact that 6i Reports is not certified to work with 10g Database. Hence it becomes impossible to address the sorting behavior of 6i Reports, though there is nothing different in the way it works. I would suggest you to use 10gR2 version of Reports services with 10g Database which is certified and supported. Thanks for your understanding.
Regards,
Anand

Is there a way of making my iPod's "cover flow" sort in the same way the software can . Artist -- Album by Year . It only seems to do Artist -- by Alphabetical Album . I want it look like it does on the PC .

Is there a way to make the "cover flow" on the iPod match the sort style that I use on the software . I go with Artist -- Album by Release Year . But the ipod seems to only do Artist -- Alphabetical by Album , and then there are a handful of albums oddly out of place . Can it be done ?

Ottonomy, here's what to do.
Connect your iPhone to your computer and open the iPhone's playlist in an iTunes window. Copy/Paste the entire playlist into a new(!) playlist in iTunes, not on your iPhone. Then resort the playlist. After you sort it, Copy/Paste it to a new(!) playlist on your iPhone. Now delete the old playlist on your iPhone and rename the new playlist the name you want it to be (probably the same name as the old playlist).
The downside to this method is that you have to do it every time you add a song to the playlist. Unfortunately, I don't think there's another way.

ICal Print List - Why are to-dos randomly sorted?

When printing from iCal in the list view, my To-Do List is NEVER sorted the way I sorted it in the main iCal window (whether by Calendar, Priority, or Manually). Instead it's just sorted randomly, which is very unorganized.
Does anyone know why this is, or what can be done to fix it?

It sounds like from your description that you're entering a date as a string in the todo description. Ideally you should be entering the date as the due date. This will help the sort order both in iCal and when printing. When you decide to print the To Do List, make sure View is set to List. Only check To Dos. In the time range, select the range you want to see. Anything without a due date will be printed under the heading To Dos without Due Date.

Month Sorting at Universe Level

Hi All,
We have created a Universe on BEx query to develope an BO Explorer.
We are having Sorting problem with Fiscal Period values, which is in Character type.
So need some clarification on below queries..
Q: Can we change the Fiscal Period datatype from Character to Number?
I think it will give an error if we change the datatype
Q: Can we add preceding zeros for 1 to 9 months?
I used below MDX expression for testing purpose,
<EXPRESSION>IIF([0FISCPER3].[LEVEL01]="1",1,2)</EXPRESSION>
But it is always giving me the else part only.
If I replace the dimension with Measure then the above expression is working fine.
Q: Can we use Concatination Operator for adding preceeding zeros for periods 1 to 9?
Q: Can we apply any transformations on Dimenstion fields?
Environment details:
BO 4.1 SP3
UDT 4.1 SP3
Please advise me.
--Praveen G

Hi Ann, it is always helpful to have a dim_time table in your data mart where you have these 2 fields (among others):
month_number     month_full_name
     1          January
     2         February
and so on...
Then you can put something like the following SQL in your derived table called "MONTH"....
select distinct month_number, month_full_name
from dim_time
order by 1
Create a dimension object, says, "month_lov". Go the Properties tab, click "Edit", then "SQL". In the query panel, put in something like this...
select month.month_full_name
from
(select distinct month_number, month_full_name
from dim_time
order by 1) month
Make sure you check "Do not generate SQL before running", then click "OK" and "Save and Close". Then create a condition object to point to this LOV. You should be able to get the months listed in the real order.
Hope this helps.
If you are using the BusinessObjects tool, you should join [ASUG|www.asug.com]

Sorting flowchart

Similar Messages

Maybe you are looking for