Sorting problem in BEx/Portal

Hi all,
I am facing a problem while sorting an Infoobject in BEx or in portal.
For e.g I am having a PO Status Report in which I have PO, Trasaction description and calday.Now when I am executing that report in BEx and on right clicking -> Sort PO with Ascending/desceding by key/ Text it is working fine but while sorting the other characteristics like Trasaction description or calday the sort functionality is not working.
Please let me know why this is happening.
Thank you.

I have also tried with changing the sort characteristic setting in the display properties of query designer but no outcome.
Is it something like sort functionality will work with only master data or key fields or transactional data.
Please let me know if this is the case with sort functionality.
Because for my queries the sort function is only working for key fields which is defined at the Infoprovider level.
Thank you.

Similar Messages

Problem in BEx analyzer output in BI dev and BI Quality

Hi All
I am facing a problem in BEx analyzer output in BI Dev and BI Quality server where the query is make on BI infoset.
When i am executing the query in BI dev server then it is giving the output result but when i tried to executing the BI query in BI quality server the i got 'No available data found result'.
I have also checked the same selection input result in infoprovider for infoset and output is getting for the same.
Please suggest for regarding solution.
thanks & regards,
Gourav Sekhri

Hi,
check whether you have loaded data in to quality server if no, please load data for all the target involved in info set. If data loaded check all the target 'request for reporting available 'or not.
Also check whether data is showing in infoset or not.. if data availble there change your selection critiria accordingly.
Thanks
BVR
Edited by: binu v. rajan on Aug 20, 2011 4:23 PM

Problem running Oracle Portal to Go (Oracle9i 1.0.2.0.0)

I have installed Oracle9i Application Server WE 1.0.2.0.0 Standard Edition on Windows2000 Professional Edition. I am getting problems regarding running Portal to Go.
The installer said that installation was successful. Moreover I have done the configuration tasks mentioned Oracle9i installation guide under post installation steps for Oracle9i.
But Oracle Portal to Go is not running and returning error message. Are there some other tasks still to perform to configure the Oracle Portal to Go Standard Edition?
Here it is a brief Description of what I have done with the installations process
System: Pentium II 500 MHZ with 256 MB RAM and 15 GB Hard Disk so enough space available for installations.
Windows 2000 professional was freshly installed
All pre installation tasks are done like paging file size is 896MB
Important Installation steps and points are as under (Standard Edition of Oracle 9i Application Server 1.0.2.0.0):
I followed all the steps given in Oracle 9i AS installation guide
On Windows 2000 Installer never asks for reboot before actually installing the Oracle 9i application server (Chapter 4 of installation guide: preparing system for installation: step5: page 5 of 25). So I manually reboot the system
During installation when I reached Database Access Descriptor (DAD) for Oracle Portal. In TNS connect string field for Apache listener Configuration I entered the same name (abc) (chapter 4 of installation guide: installing oracle 9i Application server: step2, 3: page 10,11 of 25) as I was going to use for my Global database name later at database Identification steps (chapter 4 of installation guide: installing oracle 9i Application server: step 4: page 12 of 25)
Note: In an other installation I left the same fields (TNS connect string) blank but of no use.
(Please let me know if I have made any mistake here)
When installation of Oracle9i AS reaches 100% installer opens a command prompt and displays
ORA: 12541 TNS: No Listener
Enter user name:
When I enter SYSTEM as a user name it displays
Password:
I entered manager as password and then it displays
ORA 12560: TNSProtocol adaptor error
And once again it asks for user name and password
I once again enter system as a user and manager as password.
(Please let me know if I have made any mistake here)
After 100% completion of the installation the configuration tools screen appears
(Chapter 4 of installation guide: installing oracle 9i Application server: step 10: page 17 of 25) and the following tasks are performed
Net8 configuration Assistant succeeds
Oracle database configuration assistant succeeds
When The Oracle portal 3.0 configuration Assistant Starts
I hold the installation steps for oracle portal for a while and do some database configuration tasks that are necessary (may be some are not) for installation of portal.
(Please let me know if I have made any mistake here)
For example
Increase the table space size of Users (400 MB), and Temp (100MB) table spaces.
Validated invalid PL/SQL Modules with ULTRP.SQL script
(Please let me know if I have made any mistake here)
Installed dbms_job.sql package as it was mentioned in another guide (Oracle portal-to-Go installation Guide- Release1.0.2: Page 1: last line)
(Please let me know if I have made any mistake here)
Stopped the database and listener
And did some changes as was asked in Oracle portal-to-Go installation Guide- Release1.0.2
Edited the init<SID>.ora file and set the following fields
aq_tm_processes = 1
job_queue_processes = 4 (2 were recommended in guide but I left the already set values)
job_queue_interval = 30
(Please let me know if I have made any mistake here)
Also I did the following too (though these are recommended for Internet file system)
opern_cursors = 300 (in installation guide it is asked 255 but I kept the already set value)
shared_pool_size = 52438800 (50M was suggested and this is more than that)
processes = 200
(Please let me know if I have made any mistake here)
I started the database and listener
Proceeded the installation of Oracle Portal as is described in installation guide for Oracle 9i Application guide 1.0.2.0.0
And successfully completed the installation of Oracle Portal
There were no errors reported on the installer however when I read the installation log some errors were mentioned at the end of the file
Please see the attached log file.
I also completed all the post installation tasks at the end of chapter 4 of Oracle9i Application Server installation guide 1.0.2.0.0 except the configuration of Oracle Internet file system (is it necessary for running Oracle Portal to Go)
When I run the oracle portal to go the following situation is encountered
Working: http://localhost/pls/portal30/admin_/dadentries.htm
Error at: http://localhost/pls/portal30/portal30.home
Error: The preference path does not exist: Oracle.Portal.Page (WWC-51000)
(And this is the main source of confusion)
Working: http://localhost/pls/portal30/admin_/gateway.htm?schema=portal30
Working: http://et-wks-08:5555/invoke/wm.server.admin/adminPage
Are there any other guides and post installation steps still to follow to successfully run this Portal to Go or it is sufficient?
I can also send the installation logs of both Oracle 9i application server (installActions.log and installActions2001-05-28_03-50-56-PM.log) and Oracle portal to Go (install.log).
If you ask, I can send you the installation guides that I have followed and the screen shoots of the error messages for a detail review.
Moreover can anyone please tell me if this version of Oracle 9i Application server is ok or I must try some other version?
Also advise any other if any successful configuration and installation options.
Is it possible to run this portal to go with any other installation options/arrangements/configurations etc?
Any help from anyone will be highly appreciated.
Regards,
Muhammad Usman,
Software Engineer
EssTec Lahore, Pakistan.

Hi,
If you use portal 30 instead of OAS, The installation gives you the Apache ready.
Pablo
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Tarun Singhal ([email protected]):
Hi,
I am trying to implement Portal-to-go application .
For installing Oracle Portal-To-Go 1.0.2 ,I followed oracle
documectation.Now I want to install Portal-To-Go 1.0.2
application using
a) winnt ver. 4.0 (SP3)
b) Oracle 8i
c) Oracle Application server release 4.0.8.1
d) servlet patch set
e) pl/sql cartridges.
(Oracle 8i and OAS 4.0.8.1 are installed with different oracle home directories.)
I have installed winnt , OAS rel.4.0.8.1. both are working fine
.now I want to install servlet Patch set and
pl/sql cartridges.I am unable to locate the information and software for this on oracle site.
can any body tell me why servlet patch set and pl/sql cartridges
required for this application and
from where should i download the servlet patch set software and PL/SQL cartriges
for this version.
Are the above specified softwares are compatible with each other or something extra
required for this installation. Is service pack 3 (winnt 4.0) compatible
with portal-to-go 1.0.2
Can anybody help me please ?
Regards
Preeti Madhukar
([email protected])<HR></BLOCKQUOTE>
null

The problem about integrate Portal and R/3

Hi everyone :
   We want to achieve that our vendor can query R/3 report via our Portal. I had done SSO configuration.
   But we had about 500 vendors, it is impossible that we create 500 R/3 users for our vendors, because the cost is too much .
   And there is another problem, vendor who had the authorization to query report can query the other vendor's data at same time. But we expect that certain vendor can query his data only.
   I think this is a general problem when integrate Portal and R/3, BW .
   Is there somebody had solved this problem or give any advice?
   Any discuss is welcome.
Best Regards,
Jianguo Chen

Hi,
I would say: get in contact with your SAP account manager anc check which options SAP can offer you...
Normally every user using a R/3 system has to have a valid user license in that system. Expecially when you want to access control to data on user (vendor) level you nedd to identifiy the user clearly and uniquely which by standard means you need a user for every vendor.
Hth,
Michael

The problem about integrate Portal and R/3 : vendor query report problem

Hi everyone :
   We want to achieve that our vendor can query R/3 report via our Portal. I had done SSO configuration.
   But we had about 500 vendors, it is impossible that we create 500 R/3 users for our vendors, because the cost is too much .
   And there is another problem, vendor who had the authorization to query report can query the other vendor's data at same time. But we expect that certain vendor can query his data only.
   I think this is a general problem when integrate Portal and R/3, BW .
   Is there somebody had solved this problem or give any advice?
   Any discuss is welcome.
Best Regards,
Jianguo Chen

Hi,
I would say: get in contact with your SAP account manager anc check which options SAP can offer you...
Normally every user using a R/3 system has to have a valid user license in that system. Expecially when you want to access control to data on user (vendor) level you nedd to identifiy the user clearly and uniquely which by standard means you need a user for every vendor.
Hth,
Michael

I can't open iTunes on my pc in windows. I keep getting a Problem event: BEX error.

can't open iTunes on my pc in windows. I keep getting a Problem event: BEX error. How can i fix this? need very detailed step by step instructions on how to fix. thx

Check out this discussion link:
https://discussions.apple.com/thread/2777410?threadID=2777410&tstart=15

Since update, when I click on iTunes store I get message that iTunes has stopped working fault module StackHash_e8ad Problem event BEX

Since updating iTunes, I can open iTunes, view my apps, music, movies, etc. But when I click on iTunes store I get an error message that iTunes has stopped working. The fault module name: StackHash_e8ad Problem Event: BEX. Already tried reinstall several times and tried all the tips and advanced tips on the iTunes troubleshooting page. HELP!!!

Try gn_id's suggestion from the following post:
Re: iTunes 11 crashes when opening the store - no error message

Problem in BEX Analyzer

Hi Gurus,
*Sales Query 1     *
*CUSTOMER ID     *
*MATERIAL ID     *
*Key Figures     *
*SALES REP ID     *
*No Applicable Data Found.     *
Could you guys please help me to solve the above problem in BEX when excute query.
No data is showing in BEX though infocube shows the data.
Cheers
Shrinu

Check if data in infocube is available for reporting, Goto context menu of cube -
> manage -
> requests tab --> check and see if the 'request for reporting' column has the query icon.
Also, do you have aggregates defined on u r cube. If uo do, you will have to roll up aggregates.
right click cube -> manage --> Rollup tab -> Press Execute button
after its complete goto requests tab and refresh, the u will be able to see the icon for 'request for reporting' available.
run your query again and you shd be able to see data.
If the above dont work search the forums for more info, this problem has been discussed several times.
Thanks
K
Edited by: Krishna K on Jan 20, 2008 2:48 AM

Translation problem in the portal screen

Hi Experts,
We are facing problem in the portal screen where some texts are displaying in-correct languages.
Basically all the text should come in Chinese if we login in Chinese language, but it is coming in English
For e.g. In Follow on Documents screen u2013 Value (filed label) is coming in English instead of Chinese,
Similarly some Chinese text is wrongly translated.
Help us how to do the translation or should we need to apply any OSS notes for this?
Should we need to use translation SOTR_EDIT to do the translation?if then how to do it?
Regards
Paul

Hi,
What is the SRM version ? Please also check the language setting in your browser.
For wrong translation, you can correct it in the translation tools like SE63.
Regards,
Masa

Display problem in the portal: Interesting!

Hi,
I am facing an interesting problem in my portal.
In the content area, when an iview is getting displayed, sometimes I dont find the blue background and proper arrangements of the tabs present in the iview.It becomes plane white and the texts and tabs that are to appear in the content area are seen in a random fashion.
This problem it doesnt occur always. Sometimes it works fine and sometimes it gives this problem. Please get me a solution.
Regards,
Pawan.

Hi,
There may be some problem in installation itself. Not sure. May be u can try updating the latest patch and see if the probelm gets resolved.
Regards,
Harini S

Problem connect to Portal with SLD

Hi , i have problem connect the portal (7.0) whit SLD server
The SLD server is configured in the Solution Manager.
SLD: ctsi386nt02.ctsnx.com:sapgw00
the check connect SLD failure. show messages.
[Thr 4724] * ERROR       partner 'ctsi386nt02.ctsnx.com:sapgw00' not reached
[Thr 4724] *
TIME        Tue May 03 14:15:29 2011
[Thr 4724] * RELEASE     700
[Thr 4724] * COMPONENT   NI (network interface)
[Thr 4724] * VERSION     38
[Thr 4724] * RC          -10
[Thr 4724] * MODULE      nixxi.cpp
[Thr 4724] * LINE        2823
[Thr 4724] * DETAIL      NiPConnect2
[Thr 4724] * SYSTEM CALL connect
[Thr 4724] * ERRNO       10061
[Thr 4724] * ERRNO TEXT WSAECONNREFUSED: Connection refused
[Thr 4724] * COUNTER     25
[Thr 4724] *
[Thr 4724] *****************************************************************************
    Return code: RFC_FAILURE(1)
    error group: 102
    key: RFC_ERROR_COMMUNICATION

Hi,
User SLD - doesn't matter on name belogns to system where SLD is configured and running. SO I guess you have SLD on Solman.
In case you didn't configured SLD on portal you have to set up on portal on visual admin choose Cluster > Server >Services > SLD Data Supplier > tab Runtime > HTTP Settings and add data of your Solman's SLD hostname port and user (SLDDUSER)
In case of you have SLD also on portal, go to SLD page e.g. http://<hostname>:5<system_number>00/sld
On the SLD initial page, choose Administration and in the section Server > Data Suppliers.
add data of your Solman SLD
Check web http://help.sap.com/saphelp_nw70/helpdata/en/ee/74b3407e73c57fe10000000a1550b0/frameset.htm
Best regards,
Peter

Sorting Problem in FND_MENU_ENTRIES_TL Table

Hi,
FND_MENU_ENTRIES_TL Table storing the record FND_MENU_ENTRIES_TL_N1(MENU_ID,PROMPT,LANGUAGE) wise in R12. But whereas in 11i, records stored FND_MENU_ENTRIES_TL_U1(MENU_ID,ENTRY_SEQUENCE,LANGUAGE).
I am confused, whether i need to recreate the index in R12, so the records will get store MENU_ID,ENTRY_SEQUENCE,LANGUAGE wise.
Could any one please suggest me how to resolve this problem.
Thanks,
Praba T

815667 wrote:
Hi,
FND_MENU_ENTRIES_TL Table storing the record FND_MENU_ENTRIES_TL_N1(MENU_ID,PROMPT,LANGUAGE) wise in R12. But whereas in 11i, records stored FND_MENU_ENTRIES_TL_U1(MENU_ID,ENTRY_SEQUENCE,LANGUAGE).
I am confused, whether i need to recreate the index in R12, so the records will get store MENU_ID,ENTRY_SEQUENCE,LANGUAGE wise.
Could any one please suggest me how to resolve this problem.
Thanks,
Praba TPl do not abuse the forums by cross-posting in multiple forums
Sorting Problem in FND_MENU_ENTRIES_TL Table
Sorting Problem in FND_MENU_ENTRIES_TL Table
Your issue is related to EBS, not to database upgrades (which is the topic of this forum)
Srini

Sorting problems in Grid View

Hi, I'm having a bit of a sorting problem when it comes to an artist with name variations. The example I'm going to use is DJ Tiesto.
There are album I have where he is credited as DJ Tiesto, and others where he is simply Tiesto.
In the end, I'd like these albums sorted chronologically under one name (say DJ Tiesto), while still preserving and showing the proper artist name for each album. I have it set to sort by "Album by Year", which is working fine.
The major problem I am having is that I can't get it to display properly across all iTunes viewing methods: List mode, Grid mode, and Coverflow.
I've tried leaving the Artist field alone, and changing the Sort Artist field to "DJ Tiesto" for all songs, and that almost works:
-List mode groups them all under "DJ Tiesto", while showing each albums Artist as the correct artist name.
-Grid mode sorted by Album groups them all under "DJ Tiesto", while showing each albums Artist as the correct artist name.
-Coverflow sorts them all in chronological order, while showing each albums Artist as the correct artist name.
Problem is, Grid mode sorted by ARTIST creates two separate artists! Some for DJ Tiesto and some for Tiesto!
To correct this I tried changing the Album Artist field for all songs to "DJ Tiesto", which solved that problem but created a bunch of new ones:
-List mode is still correctly grouping them under "DJ Tiesto", while showing each albums Artist as the correct artist name.
-Grid mode sorted by Album is still correctly grouping them under "DJ Tiesto", *however now it is not displaying the correct Artist name for each album!*
-Grid mode sorted by Artist is now grouping them all under "DJ Tiesto", *however it is not displaying the correct Artist name for each album!*
-Coverflow is sorting them in correct chronological order, *however it as well is not displaying the correct Artist name for each album!*
Using the Album Artist tag has created more problems that it has solved! Is there anyone who knows a way to achieve what I am trying to do? I have tried seemingly every option I can and have still not found a way to do this!!
Thanks!

My own method of working involves renaming the files upon import to:
i "shotdate_sequencenumber"
Files are therefore typically named
b 2007-11-25_001
etc.
This way, sorting by Filename automatically sorts by Date by default. And it wouldn't even matter if you added a descriptive text in between the date and number (
b 2007-11-25_Scotland_001

Problem about Bex Exception

Hi All,
I have some problems with bex exception. In my query, I have 3 columns (the third one is a rate calculated from the first (C1) and second columns (C2)). I have a characteristic in row which lists the different values. Sometimes, I have no value for C1 and C2 and also, the value rate is space (thatu2019s normal behaviour). I must highlight some rate by
If rate < 55         bad
If rate => 55      good
I did an exception
Bad        except1    BT      0 to 54
good      except2    GE      55
That works fine but my problem is :
The rate cells with a space value are also highlighted with the bad colour. Have you some idea to avoid this behaviour ?
C1                        C2                                                 Rate
1000                         5                                               200   (C3)
100                        20                                                5    (C3)
space                              space                               space   (C3)
1st C3 is green
2nd C3 is red
3rd C3 is also red (I want to leave blank)
Thanks fot your help.

Hi,
If you are in BW 3.5 then you can make us of class interfaces for this scenario and it was explained here in this article.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e0b4cfcc-f9c1-2b10-1bb5-d4b61083d471
Hope this helps you.
Regards,
Rajkandula

Sorting problem in standard vendor search help

Hi all,
I'm enhancing the vendor search help.
I found that there is a sorting problem in the original standard search help.
The 1st time to search vendor in the search help returns a correct list, then I just sort the vendor in ascending order. This time the column name of the hit list changes and mismatch the actual values.
Any one faced this problem before?
What's wrong are there ?
Thanks.

Thanks Peluka.
But even I don't enhance the vendor search help, I still found that the original standard version has this problem after sorting.
Is that the program bug?
Have anyone encountered this problem before?

Sorting problem in BEx/Portal

Similar Messages

Maybe you are looking for