Sorting problem in standard vendor search help
Hi all,
I'm enhancing the vendor search help.
I found that there is a sorting problem in the original standard search help.
The 1st time to search vendor in the search help returns a correct list, then I just sort the vendor in ascending order. This time the column name of the hit list changes and mismatch the actual values.
Any one faced this problem before?
What's wrong are there ?
Thanks.
Thanks Peluka.
But even I don't enhance the vendor search help, I still found that the original standard version has this problem after sorting.
Is that the program bug?
Have anyone encountered this problem before?
Similar Messages
-
Qtn: I have 10 standard elementary search helps in collective standard search help, how to deactivate the 10th elementary search help?
Hello,
this topic is still a problem for me, does anybody have an idea.
Just to show what's my problem:
Collective Search help KRED does include a SAP append-search help ASH_KRED which holds the elementary search helps KREDC, KREDE, KREDM, KREDW.
The search helps KREDE, KREDM, KREDW should not be displayed, so I added another Serach-Help-Append ZKRED_CUST at the end of CSH KRED which holds these 3 SH's with the hidden flag.
That works, the SH's are not shown anymore.
I also added some other of the Original SAP SH's (e.g. KREDA) with the hidden flag and added changed copies of these (e.g ZKREDA) there to be shown instead.
All this can be done modification free by appends.
The folders of the elementary search helps are shown in the order as they are found included in the KRED SH and the append to this SH.
This means that the not hidden Sh KREDC from ASH_KRED is shown before all the "custimized" ZKREDx -SH's. But we need this SH not very often, so that I want it to displayed al the right-most position of the folders of SH's or at the most down postition of the drop-down-selection of SH's.
But I have not found any way to do this modification free.
The only way to archive this is to modify ASH_KRED by setting the Hidden-Flag for KREDC and add this SH at the end of append-SH ZKRED_CUST again.
But I want avoid this modification.
So, is there any way to do this without modifing any of the original SAP SH's ?
Helmut Fischer -
Adding elementry search help to SAP standard Collective Search help
Hi,
I had copied standard elementary search help to MAT0M to ZZ_MAT0M and added some more fields and activated to it.
it got activated sucessfully.
Now i have to attached the ZZ_MAT0M elementry search help to standard collective search help MAT1_A.
How can i do that?
can i add it directly to MAT1_A (sell --->search help <MAT1_A> changes --> in included search helpss tab using + (insert icon) )
Thanks & regardsI solved my problem :
I had copied standard elementary search help to MAT0M to ZZ_MAT0M and added some more fields and copied Database View M_MAT1M to ZZ_M_MAT1M and addedd same fields and activated both.
both got activated sucessfully.
Now i have to attached the ZZ_MAT0M elementry search help to standard collective search help MAT1_A and this Z-search help shd appear on the first tab.
so I just went to collective search help MAT1_A in change mode --> click on "+" icon addedd my ZZ__ search help, save and activated it.
If you dont really care in which tab your search help shd appear, then the best option is to use Append Search help.
Note : if you are directly adding your search help in collective standard search help, then its better to remove hotkey form your custom elementry search help, as, if not remove will lead to warnings or make sure that you have unique hotkey in that collective search help. -
Need a Function Module to call a standard Elementary Search help - DEBIK
Hi Gurus,
I need to call the standard elementary search help DEBIK in one of my screen fields. Also I need to filter the values for the Account group KTOKD to Z104 ( transshipment location customers).
Actually i do not want to copy the standard search help DEBIK to custom search help ZDEBIK and give a default value of Z104 to field KTOKD.
Also i do not want to use FM - F4IF_INT_TABLE_VALUE_REQUEST .
I want a FM which will call the search help directly . I tried using FM - FC_RVERS_SEARCHHELP but did not succeed. Can anybody help me in this.
Thanks and Regards,
Nabanita.Can you check both FM DDIF_SHLP_GET and 'F4IF_FIELD_VALUE_REQUEST'
Kanagaraja L -
I have a user that is requesting that Vendor PO Box and PO Box ZIP Code be added to the Vendors by Address Attributes tab in the Vendor search help screen.
Any ideas with where to start?
Thanks!Hi Barth,
That was over an year ago. I hardly can remember what I had for lunch yesterday. Well, actually yesterday is easy because I have Mexican every Sunday.
Anyways, try setting a break point in the FM I mentioned. It shouldn't be too hard to debug. And it will answer two questions, if it is actually where the vendor is being fetched, and what is going on.
If all else fails, open a new thread explaining what you've done and what the results are, as this topic has been closed.
Good luck.
Best,
Bruno -
WD ABAP Standard - change search help
Hi experts,
In a standard WD Abap there is a field in the context that have a dictionary search help, which is standard too, but we want to replace it with another non-standard dictionary search help. Our requierement is to do it using abap code by an enhacenment.
We have been looking for any solution but we didn't find nothing. How can we do it?
THanks in advance.
Cheers,
ASHi guys I did a workaround using an user exit for this search help and it works!
Thanks anyway! -
Vendor: search help by VAT registration number
Hi,
is there a way to have a search help by VAT registration number taking in account the main VAT registration number (LFA1-STCEG) AND alternate rgistration numbers (LFAS-STCEG) (if possible in a single search) ?It is possible. You may please discuss with ABAPer.
But, then we are amending the standard screens.
But, my question is in LFAS, for a single vendor you can enter multiple VAT numbers. In such case, how would you expect the combination works.
Regards,
Ravi -
Standard F4 (search help) in the web dynpro JAVA
Hi,
I have a small doubt in web dynpro Java. Basically I am an ABAP developer. We created some custom Remote function modules (RFM). Now are able to call RFM through web dynpro JAVA in the portal. We are able to run the RFMs in the portal.
But we have problem with search help. How can I built the search help for the input fields in the portal using web Dynpro Java.
Can we bring standard search help (which is exist in R/3) in the portal?Hi,
I think there is no standered functionality available in WDJava to achieve this functionality like ABAP or WDAbap. but, you can still achieve this using OVS option. to do this also, first you should have an interface which can talk to the R3 system and search the dB as per the query parameters i.e, an RFC which can the desired form of input and give you the desired output.
for more info on OVS, please look into this below links.
OVS:
Web Dynpro Java Tutorials and Samples NW 2004 [original link is broken]#51 [original link is broken]
WDJ tutorials:
Web Dynpro Java Tutorials and Samples NW 2004 [original link is broken] -
Standard Elementary Search help number of hits
Dear All,
I am having simple problem with the Standard Search Help "RSFISCPER".
When i display with out restrictions it shows only around 219 hits , even with restrictions it shows the same number .
How can i see all entries in the search help.
If i give selection like FisVarient K4 and period from 001/2007 to 012/2007 then it shows correctly. but if i give only K4 then all entries will not show related to K4.
I appreciate you help.
Thanks
ManjuDear Manjunatha,
You can copy the complete hit list from the search help exit,
Check out the link below:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee52446011d189700000e8322d00/content.htm">Search Help Exit</a>
Best Regards,
Raj
<b>Please reward points if helpful.</b> -
Adding new selection field into a standard collective search help
Hi All,
I have a standard search help KRED attached to vendor field in FK03 transaction.
My requirement is to add one more field in the selection criteria in the 'Vendor (PO Box) tab.
Thanks,
JyotiI'd create a new custom elementary search help and add to KRED.
-
Problem in Translation of search helps
Hi all,
SAP has not presented my language version so I have selected Arabic and there I translate words to my own language. But while translating search helps, I have some problems. I would like to see the text written for guidance in my own language when pressing F1. Can anyone help me?
Regards.
MonaHi Mona,
can you provide a screenhot of the text you need to find and a click path for calling it up? Search helps can use different translation object types depending on how the functionality is implemented, so I cannot give a general answer.
Thanks,
Martin -
How to enhance standard collective Search Help VMVM
Hey Expert,
Any pointer to enhance the standard search help VMVM with custom search option will be highly appriciated.
Thanks in advance,
SayakHey Expert,
Any pointer to enhance the standard search help VMVM with custom search option will be highly appriciated.
Thanks in advance,
Sayak -
Problem with respect to Search Help AND Dialog Progg
Dear All,
I have a screen 0100, wherein Input-output field 'Veh_num' is created.
Also there are another Input-output fields ( S_Date and S_time).
Now end-user just displays records in screen when puts Veh_num(Vehicle number) in the field and clicks DISPLAY.
Now problem arises when two Veh_NUM(Vehicle numbers) are present on same date but different on different time.
i created a SEARCH HELP for the input-out field VEH_NUM(vehecle number).............where both records are displayed. But when user select any record of the two, always only a particular record is displayed on the screen.
I Think the problem lies when User selects a row from the search help, Only VEH_NUM gets transferred to the screen. I think If along with the Vehicle number, If S_time is also transferred then the problem will get solved.
Search Help has 1 input(Veh_num).......and 3 Output fields( Veh_num, S_Date and S_time.).
Pls suggest.
Thanks in advancehi dsilva,
Is ur Requirement is, that u need to select vehicle number and values corresponding to that
number i,e Date and Time should get displayed on the screen?.
Use Dictionary Fields if U Have, to define ur input/output fields
OR.
follow the below steps.
1) First Check the serach help which u have created works as per ur requirement.
2) The screen which u have designed has an input field(Vehicle Number).U may Have taken the
field from Progarm or any other variable to define it.Don't do that.
3) First Create a structure from SE11 and Define fields Vehicle Number and Date and Time.
4) Assign Search help to the field Vehicle Number in the Structure.
5) Use this Struture in your screen desigining.
6) Then it automatically picks up the values and dislplays on the screen for a corresponding vehicle number. -
Hai ,
I have requirement , I need to assign a search help for a standard field , is it possible if it is possible without access key can we do that or else is there is any method from customising side .
Regards,
K.Vinay KumarSearch Help can be implemented at following place
At Data Dictonary level.
At screen Attrb.
In Flow Logic.
if its standard filed i dont think we can do without Access key.....
Rgds,
Edited by: J P Pancras on Nov 26, 2009 7:23 PM -
Search help to populate mutiple fields
Hi All,
I have a problem with standard collective search-help CLCITYNAME which I added parameter POST_CODE1 type IMPORT and EXPORT. I then create elementary search-help Z_CITY_NAME, which is included into collective search-help CLCITYNAME, which has parameter POST_CODE1 type IMPORT and EXPORT.
This collective search-help CLCITYNAME is called in transaction XD02 on F4 of the CITY field. The added search field POST CODE is showing but selected post code value is not passed to the screen. WHat can I do to pass the selected post code to screen.
Pls help.
POints will be rewarded.
Thanks.Hi,
For the data to flow from search help attached to screen,the search help and the screen field should be created with same dataelement.And the parameter "EXPORT" should be checked while creating the search help.
Regards,
Ajith
Maybe you are looking for
-
Issue with JPDs in my weblogic application
I have a weblogic integration application running on WL 8.1 SP5. There are 2 JPDs and 2 web services in the application. I am having an issue in the live server when the application has been running for quite a while. One of the JPDs stops working. T
-
Apple iPhone 5 cable saying "this accessory may not be supported"?
Using the Apple Lighting cable I specifically purchased off the Apple site with my Apple iPhone 5 (IOS 8..1.2) so that I would have at least one charge cable that would work with my computer and my phone. But at last I have been mistaken. Everything
-
How can I prevent my iPod nano from turning on by itself and running down the battery?
I will arrive at my desk in the morning, stop the podcast I'm listening to, notice by the "play" button appearing on the screen and that absence of audio in my ears that the podcast has actually stopped, hold the big oval button down until the screen
-
Device busy: 2nd hard drive (Ultra 10)
Hi All: I'm working on a new Ultra 10 that came with two hard drives and pre-installed SunOS 7. I accidentally removed some configuration files and re-installed 5.8 BetaRefresh. Now the second hard drive is invisible to the OS. I would appreciate any
-
What happened to the movies I rented????