Sorting Promts in Webi from BEx Query

Hi Everybody,
is it possible to control the order of the prompts which are coming out of variables in a SAP BEx Query?
I know this is possible when using other sources than SAP BI.
Regards

Prefix the prompt text with numbers in an ascending order of your prompt preference.
1.Enter Counrty name
2.Enter Region name
3.Enter city name

Similar Messages

  • Analysis Office vs Webi report ---Bex query Data mismatch

    I have one Bex query.
    I insterted the query in Analysis office for Microsoft edition, and its pulling 985 records, but when i inserted the bex query in Webi report its pulling only 27 records. Any body faced similar problem, explain the solution..?
    Using BICS connction for webi report development.
    Environment: BI 4.1 SP5
    Anlaysis office version :  1.4 SP10

    Hi Ingo,
            If we make it database delegated then the Webi query returns no results. (Blank results). Moreover there is no exception aggregation
    We have tried the following and getting the result correctly,
    In the Bex Query We had a Time variable which was based on SAP exit. We removed the SAP exit variable from Bex Query and restricted the period for atime range.
    Then created a Prompt in Webi report for the time
    The result is matching.
    But still failed to undrstand this because other queries which have SAP exit variables works fine.
    Still working around for a convincing solution for this.. Will let you know
    Thanks and Regards
    Rajesh

  • Facing prolem  in Dashboard 4.1, while fetching data from Bex Query

    Hi Exports,
    I am facing an error message  " Failed to (de-)serialise data. (Xsl 000004)"  while fetching data in Dashboard from Bex Query.
    The query is getting connect. while drag n drop some dimensions and measures then going for Refesh or Run Query, geting this error.
    The same query is working fine with other comp like webi n crystal.
    Anybody having solution for this please let me know. I am stuck somewhere.
    Thank You

    Hi,
    Check the data in the infoProvider.Reduce the  Bex query Characteristics & Key figure fields.Try to identify due to which characteristsic adding in Bex Query ,are you facing the issue.Check that characteristic data in the infoProvider.
    Regards,
    Venkat

  • RRI?  How to call ITS URL and pass field value from Bex Query.

    I am doing RRI from query to webaddress,
    i have defined jump(report type: webaddress and reicver report as url) from shopping cart bex query(SRM ) to webaddres.
    here url is SRM ITS base link for monitoring shoppingcart(http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN).
    jump is working from portal(from bex query ivew).
    but i want to pass value(shopping cart value) to above url and want to skip first screen.
    i have maintained assignment detail by assigning field name against shopping cart infoobject with type url parameter, but its not directly call reciver url with given input field.
    i tried the diffrent combination of url and field assignment as like below:
    1: web address url:http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN
    assigned field: GS_HEADER-OBJECT_ID
    but when we call reciver url from portal bex ivew, only initial screen come with page url as below:
    http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN?GS_HEADER-OBJECT_ID='selected number value'
    2: web address url:http://(hostname):(SRM port)/sap(cz1TSUQlM2FBTk9OJTNhc3JtZGV2X0lTRF8wMCUzYUdxdFNqdWdMS2xyTEFEelFTNFlWTnJXRjEzdy05UnhTWXl4TW03c3AtQVRU)/bc/gui/sap/its/bbp_mon_sc/~flNUQVRFPTgzMTcuMDAyLjAxLjAx====#jump_to_selected_sc
    assigned field: flNUQVRFPTgzMTcuMDAyLjAxLjAx
    but when we call reciver url from portal bex ivew, only initial screen come with page url as below:
    http://(hostname):(SRM port)/sap(cz1TSUQlM2FBTk9OJTNhc3JtZGV2X0lTRF8wMCUzYUdxdFNqdWdMS2xyTEFEelFTNFlWTnJXRjEzdy05UnhTWXl4TW03c3AtQVRU)/bc/gui/sap/its/bbp_mon_sc/~flNUQVRFPTgzMTcuMDAyLjAxLjAx====#jump_to_selected_sc?flNUQVRFPTgzMTcuMDAyLjAxLjAx='selected number value'
    I have seen the source code of that url(inital screen and after entring the value to that screen) too.
    how to call webadress(SRM ITS base shopping cart URL) with passing the one of field value of that url screen?
    Thanks and regards,
    Dushyant.

    Declare the gv_orderid in modulepool program.
    And Declare the parameter as import parameter in smartform.
    CALL FUNCTION  lv_form
       EXPORTING
    *   ARCHIVE_INDEX              =
    *   ARCHIVE_INDEX_TAB          =
    *   ARCHIVE_PARAMETERS         =
    *   CONTROL_PARAMETERS         =
    *   MAIL_APPL_OBJ              =
    *   MAIL_RECIPIENT             =
    *   MAIL_SENDER                =
    *   OUTPUT_OPTIONS             =
    *   USER_SETTINGS              = 'X'
         i_input                    =  gv_orderid
    * IMPORTING
    *   DOCUMENT_OUTPUT_INFO       =
    *   JOB_OUTPUT_INFO            =
    *   JOB_OUTPUT_OPTIONS         =
    * EXCEPTIONS
    *   FORMATTING_ERROR           = 1
    *   INTERNAL_ERROR             = 2
    *   SEND_ERROR                 = 3
    *   USER_CANCELED              = 4
    *   OTHERS                     = 5

  • Settings for SAP Portal start page from BEx Query Designer

    Hi!
    In order to see queries I would like to use SAP Enterprise Portal from BEx Query Designer.
    When I push "execute" button within BEx Query Designer a wrong page will be shown in browser.
    I changed the settings in table RSPOR_T_PORTAL, but still get the wrong Portal page shown in browser.
    Question:
    What is the transaction/table/report to customize the portal start page using by BEx Query Designer?
    Thank you very much!
    regards
    Jürgen

    Hi Anton?
    Many thanks for your reply.
    But I mentioned that I changed the URL within table RSPOR_T_PORTAL and this does not help...
    Do you speak Russian? Me too
    Can you also help me with the following problem?
    Hi!
    I am about to implement SAP Best Practices scenario "B34: Accounts Receivable Analysis".
    Therefore I load the data from SAP ERP IDES system into SAP NetWeaver 2004s system.
    My problems are:
    when I try to load the transaction data for Infosources 0FI_AR_4 and 0FI_AR_6 from SAP ERP system the following happens:
    - the status is getting u201Cyellowu201D (194 from 0 records)
    - at the next day the status is getting u201Credu201D and I received the following error:
    Errors while sending packages from OLTP to BI
    Diagnosis
    No IDocs could be sent to BI using RFC.
    System Response
    There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
    Further analysis:
    Check the TRFC log.
    You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
    Error handling:
    If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source system.
    Comment:
    I did not find any entries on "Environment -> Transact. RFC -> In source system"
    The Source system connection EC6CLNT100 is OK
    Can some one help me to solve this problem?
    Edited by: Jgen Pfeiffer on Feb 5, 2009 12:48 PM

  • Calling ABAP report from BEx query

    Good day!
    I want to call ABAP report from BEx query by right-clicking on the field and using context menu. I know that transaction RSBBS is used (sender-receiver connecting), but I don't know how to transfare data to ABAP program
    In ABAP program I want to know at least data from those cell in BEx query, that was right-clicked.

    Depending on your requirement and environment, you have the following options:
    1. Use an info spoke and make selections as you would in a query.
    2. USe FM RS_VC_GET_QUERY_VIEW_DATA_FLAT to send the data to a file and your ABAP can read this file.
    Ravi Thothadri

  • Unable to run query from BEx query designer

    Hello,
    I am connecting remotely to clients environment. I am not able to run query from Bex query designer. System generates IE window with URL
    http://server.com:50300/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=ZCOPCM02_Q017&VARIABLE_SCREEN=X&DUMMY=9
    but query result isnt shown.
    Internet Explorer cannot display the webpage.
    What kind of setting do I need to change to get query working?
    thanks

    Hi Comandante,
    If you are not able to Execute the Query using Query designer, you can also execute the query using RRMX  or RSRT transaction for now until the issue with the query designer is solved ..
    Hope it helps!
    Regards,
    Pavan

  • Error while connecting executing a webi report from Bex query.

    hi all,
    i need to create one webi report fron Bex query based on sab BW.
    But when I execute the query its shows "Unspecified error invoking method or accessing property "on change DocID"".
    i didnt get this msg.
    please help

    Hi Mohit Gupta,
    Degrade the java version to java 7 update 45 and also degrade the java security level to low from medium. Also delete the java temporary files and also clear your IE browser cache as well.
    This solved the issue for me.
    Thanks,
    Chaitanya Krishna

  • Custom Hierarchy sub selection from BEx Query to Webi

    Hi All,
    The client has requested that from a hierarchy only certain accounts / account nodes be brought into the Webi report.
    I have made a Account Number Filter in the BEx query containing the nodes that the client has requested. In order to get a hierarchical view, I activated the hierarchy display through BEx and selected the hierarchy the the selection of the nodes came from.
    I ran the report through Analyzer and all works - the only nodes that show are the nodes that were filtered on through query designer and all lower nodes below it. It displays as a hierarchy properly.
    When running in Webi, I bring in the hierarchy object for Account number and the report crashes giving me the general Webi error. (I have added a screenshot).
    In conclusion, what I am trying to do is take a sub selection of certain account nodes from a hierarchy and display those nodes with all lower levels below in a hierarchy. It works in BEx, not in Webi.
    If this won't work in Webi, any idea how to build this in BEx so it will work in Webi?

    I haven't tried this myself yet - but did you register your Google API key?  Please see Google Maps in SDK Extension

  • Webi Report showing incorrect prompt from bex query

    Hello Gurus:
    I am facing a unique problem.
    I have a BEx Query which has a variable. I have built implement a BADI which restricts the variable values for the BEx Query.
    I have created an Universe on top of the BEx Query.  And I have created a webi Report on top of the Universe.
    The Webi Report when run does not use the Webi Prompt values, in other words it ignores the restrictions that I have placed on the variables. Instead it displays the whole list.
    Am I missing anything. Can some please help.
    Thanks
    EmJay

    Hi,
    select at least one key figure in the webi report and then try.
    Thanks,
    Amit

  • Need to remove prompts which is comes from Bex query

    Dear Experts,
    Currently i am working in webi report (4.0 SP2), Back end of this webi report is SAP Bex query, created by using BICS Connection. In bex query we have created different variables on Company code,vendor, business area, key date etc. from this company code and key date are mandatory variables.
    My Bex users need input screen to execute the report as per their requirement. But my webi users don't required any prompts. they want to manipulate data by using input controls.
    Req : How to avoid variables (Prompts) which is coming from bex?
    Regards,
    PRK.

    Hi Praveen,
    As per my knowledge, We can not remove mandatory BEx variables from the Webi prompt screen. Value for mandatory Query Variable has to be pass from Webi report.
    You can create another Bex Query without any variable and need to use for reporting in Webi.
    ~Anuj

  • Jump from bex Query to cprojects application

    Dear
    I'm facing following problem.
    We would like to jump from a Bex Query to a Cprojects application.
    In our Query the project ID is our infoobject that we want to use as key field in RSBBS but the destination is a Cproject application (Web portal) .
    I've received an URL where the application is stored but it seems that the Cproject application can't be called from BEX.
    Any help is appreciated

    hello,
    have you verified that the source system has its ITS functioning, the RFC and logical systems defined.
    Make sure the source ITS name is maintained in the RSBBS_RSRR_URL or TWPURLSVR table.
    The OSS note 771351 gives details about the details for the configuration.
    Regards,
    Dhanya.

  • Jump to BP transaction from bex query

    Hello all,
    the client I´m working for wants to jump from a bex query to BP crm transaction. I implemented that using RSBBS transaction, but when I execute the query --> Right mouse click --> Go to --> transaction (BP) system goes to a web page; The issue is that I want to access BP transaction via SAP GUI, not via web. Is that possible? If so, what is going wrong?
    Thanks in advance.
    Any documentation or example will be appreciated
    Carmen.

    Hello,
    You can see the SSO using the transaction  - RZ11 SSO Profile Parameter
    Also See this
    [SAP Network Blog: Long texts in SAP BW: Modeling|/people/sap.user72/blog/2006/05/27/long-texts-in-sap-bw-modeling]
    [SAP Network Blog: Long texts in SAP BW: Modeling – Follow Up|/people/sap.user72/blog/2006/06/03/long-texts-in-sap-bw-modeling-150-follow-up]
    [SAP Network Blog: Long Texts in SAP BW: Displaying in BEx Analyzer. Introduction to Excel Workbooks Formatting. Part I.|/people/sap.user72/blog/2006/06/05/long-texts-in-sap-bw-displaying-in-bex-analyzer-introduction-to-excel-workbooks-formatting-part-i]
    [SAP Network Blog: Long Texts in SAP BW: Displaying in BEx Analyzer. Introduction to Excel Workbooks Formatting. Part II|/people/sap.user72/blog/2006/06/05/long-texts-in-sap-bw-displaying-in-bex-analyzer-introduction-to-excel-workbooks-formatting-part-ii]
    Thanks
    Chandran

  • Error while creating webi on BEx query

    Hello,
    I will appreciate your help on this matter.
    I created a BICS connection and published it in the repository successfully. I then logged on to BI launch pad and tried to create webi report on top of BEx query but getting a following error.
    I am not sure what that error is all about , may be something to do with Java. I would appreciate if you advise your help on this.
    Regards.
    ==============================================================================
    HERE IS AN ERROR MESSAGE:
    java.util.concurrent.ExecutionException: com.google.protobuf.UninitializedMessageException: Message missing required fields: bytesValue
         at java.util.concurrent.FutureTask$Sync.innerGet(Unknown Source)
         at java.util.concurrent.FutureTask.get(Unknown Source)
         at javax.swing.SwingWorker.get(Unknown Source)
         at com.sap.webi.ui.dialog.bex.OpenBexPanel.endFetchNode(OpenBexPanel.java:801)
         at com.sap.webi.ui.dialog.bex.OpenBexPanel.propertyChange(OpenBexPanel.java:1009)
         at java.beans.PropertyChangeSupport.firePropertyChange(Unknown Source)
         at javax.swing.SwingWorker$SwingWorkerPropertyChangeSupport.firePropertyChange(Unknown Source)
         at javax.swing.SwingWorker$SwingWorkerPropertyChangeSupport$1.run(Unknown Source)
         at javax.swing.SwingWorker$DoSubmitAccumulativeRunnable.run(Unknown Source)
         at sun.swing.AccumulativeRunnable.run(Unknown Source)
         at javax.swing.SwingWorker$DoSubmitAccumulativeRunnable.actionPerformed(Unknown Source)
         at javax.swing.Timer.fireActionPerformed(Unknown Source)
         at javax.swing.Timer$DoPostEvent.run(Unknown Source)
         at java.awt.event.InvocationEvent.dispatch(Unknown Source)
         at java.awt.EventQueue.dispatchEvent(Unknown Source)
         at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
         at java.awt.Dialog$1.run(Unknown Source)
         at java.awt.Dialog$3.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.awt.Dialog.show(Unknown Source)
         at com.jidesoft.dialog.StandardDialog.show(Unknown Source)
         at java.awt.Component.show(Unknown Source)
         at java.awt.Component.setVisible(Unknown Source)
         at java.awt.Window.setVisible(Unknown Source)
         at java.awt.Dialog.setVisible(Unknown Source)
         at com.sap.webi.toolkit.ui.dialog.GenericDialog.setVisible(GenericDialog.java:116)
         at com.sap.webi.ui.dialog.bex.OpenBexDialog.setVisible(OpenBexDialog.java:94)
         at com.sap.webi.ui.data.BexQueryDataSourceProvider.createDataSourceInfo(BexQueryDataSourceProvider.java:85)
         at com.sap.webi.ui.context.managers.DataManager.createDataSourceInfo(DataManager.java:277)
         at com.sap.webi.ui.tasks.workflows.CreateDataSourceInfoUITask.doneProcess(CreateDataSourceInfoUITask.java:127)
         at com.sap.webi.toolkit.ui.tasks.WebITask.done(WebITask.java:123)
         at javax.swing.SwingWorker$5.run(Unknown Source)
         at javax.swing.SwingWorker$DoSubmitAccumulativeRunnable.run(Unknown Source)
         at sun.swing.AccumulativeRunnable.run(Unknown Source)
         at javax.swing.SwingWorker$DoSubmitAccumulativeRunnable.actionPerformed(Unknown Source)
         at javax.swing.Timer.fireActionPerformed(Unknown Source)
         at javax.swing.Timer$DoPostEvent.run(Unknown Source)
         at java.awt.event.InvocationEvent.dispatch(Unknown Source)
         at java.awt.EventQueue.dispatchEvent(Unknown Source)
         at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.run(Unknown Source)
    Caused by: com.google.protobuf.UninitializedMessageException: Message missing required fields: bytesValue
         at com.google.protobuf.AbstractMessage$Builder.newUninitializedMessageException(AbstractMessage.java:531)
         at com.sap.sl.olap.sapbw.protobuf.generated.SapbwService$msgBytesValue$Builder.build(SapbwService.java:567)
         at com.sap.sl.sdk.olap.sapbw.service.SapBwBrowsingServiceImpl.processDoIt(SapBwBrowsingServiceImpl.java:299)
         at com.sap.sl.sdk.olap.sapbw.service.SapBwBrowsingServiceImpl.processInvocation(SapBwBrowsingServiceImpl.java:246)
         at com.sap.sl.sdk.olap.sapbw.service.SapBwBrowsingServiceImpl.processOpenSession(SapBwBrowsingServiceImpl.java:229)
         at com.sap.sl.sdk.olap.sapbw.service.SapBwBrowsingServiceImpl.openSession(SapBwBrowsingServiceImpl.java:59)
         at com.sap.webi.ui.dialog.bex.ExpandRepositoryItemWorker.getBrowsingSession(ExpandRepositoryItemWorker.java:63)
         at com.sap.webi.ui.dialog.bex.ExpandRepositoryItemWorker.doInBackground(ExpandRepositoryItemWorker.java:40)
         at com.sap.webi.ui.dialog.bex.ExpandRepositoryItemWorker.doInBackground(ExpandRepositoryItemWorker.java:15)
         at javax.swing.SwingWorker$1.call(Unknown Source)
         at java.util.concurrent.FutureTask$Sync.innerRun(Unknown Source)
         at java.util.concurrent.FutureTask.run(Unknown Source)
         at javax.swing.SwingWorker.run(Unknown Source)
         at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source)
         at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)

    Henry,
    Thanks for yor detailed answer, I am looking into it and working with an admin people to resolve this issue. will post here if able to solve it.
    In the meanwhile I am getting another similar kind of error "WHILE CREATING WEBI ON TOP OF UNIVERSE" and wondering if both these error are of similar nature, Will appreciate your help and advice on this.
    Here is an error and its details:
    ========================
    [[error.RepositoryException] 0] <RepositoryImpl.getInternalResourceID() : can't find  InfoObject of cuid M06604sAAW5bAJsAeAAAVVgAAgqWJIcAAAA>,<com.businessobjects.mds.repository.exceptions.RepositoryException: [[error.RepositoryException] 0] <RepositoryImpl.getInternalResourceID(): can't find  InfoObject of cuid M06604sAAW5bAJsAeAAAVVgAAgqWJIcAAAA>> (WIS 00000)
    DETAIL:
    ==========
    com.businessobjects.sdk.core.server.CommunicationException$UnexpectedServerException: [[error.RepositoryException] 0] <RepositoryImpl.getInternalResourceID() : can't find  InfoObject of cuid M06604sAAW5bAJsAeAAAVVgAAgqWJIcAAAA>,<com.businessobjects.mds.repository.exceptions.RepositoryException: [[error.RepositoryException] 0] <RepositoryImpl.getInternalResourceID(): can't find  InfoObject of cuid M06604sAAW5bAJsAeAAAVVgAAgqWJIcAAAA>>
         at com.businessobjects.sdk.core.exception.ExceptionBuilder.make(ExceptionBuilder.java:144)
         at com.businessobjects.sdk.core.exception.ExceptionBuilder.make(ExceptionBuilder.java:101)
         at com.businessobjects.sdk.core.server.common.CommonRequestHandler.afterProcessing(CommonRequestHandler.java:127)
         at com.businessobjects.sdk.core.server.internal.AbstractServer.processIt(AbstractServer.java:178)
         at com.businessobjects.sdk.core.server.internal.AbstractServer.process(AbstractServer.java:133)
         at com.businessobjects.sdk.core.server.internal.InstanceServer.process(InstanceServer.java:94)
         at com.sap.sl.sdk.services.util.ServerRequestProcessor.processServerRequest(ServerRequestProcessor.java:49)
         at com.sap.sl.sdk.datasource.strategy.BuiltInDataSourceStrategyImpl.addDataProvider(BuiltInDataSourceStrategyImpl.java:100)
         at com.sap.sl.sdk.workspace.service.WorkspaceServiceImpl.addDataProvider(WorkspaceServiceImpl.java:77)
         at com.sap.sl.sdk.workspace.service.WorkspaceServiceImpl.addDataProvider(WorkspaceServiceImpl.java:60)
         at com.sap.webi.ui.context.managers.DataManager.addDataProviderFromDataSourceInfo(DataManager.java:395)
         at com.sap.webi.ui.tasks.workflows.AddDataProviderUITask.doIt(AddDataProviderUITask.java:106)
         at com.sap.webi.ui.tasks.workflows.AddDataProviderUITask.doIt(AddDataProviderUITask.java:19)
         at com.sap.webi.toolkit.ui.tasks.WebITask.doInBackground(WebITask.java:113)
         at javax.swing.SwingWorker$1.call(Unknown Source)
         at java.util.concurrent.FutureTask$Sync.innerRun(Unknown Source)
         at java.util.concurrent.FutureTask.run(Unknown Source)
         at javax.swing.SwingWorker.run(Unknown Source)
         at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source)
         at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Caused by: com.businessobjects.sdk.core.server.ServerException: [[error.RepositoryException] 0] <RepositoryImpl.getInternalResourceID() : can't find  InfoObject of cuid M06604sAAW5bAJsAeAAAVVgAAgqWJIcAAAA>,<com.businessobjects.mds.repository.exceptions.RepositoryException: [[error.RepositoryException] 0] <RepositoryImpl.getInternalResourceID(): can't find  InfoObject of cuid M06604sAAW5bAJsAeAAAVVgAAgqWJIcAAAA>>
         at com.businessobjects.sdk.core.server.common.CommonRequestHandler.newServerException(CommonRequestHandler.java:260)
         at com.businessobjects.sdk.core.server.common.CommonRequestHandler.createAllServerExceptions(CommonRequestHandler.java:238)
         at com.businessobjects.sdk.core.server.common.CommonRequestHandler.afterProcessing(CommonRequestHandler.java:121)
         ... 18 more

  • How to refresh report data from bex query (BW) with parameters

    Hello,
    i hope someone can help me with my problem. I developed an desktop application, which loads (actual state) a report from the local file system. After setting the parameters, the report should be saved as a pdf file. Loading the report into the ReportDocument object and exporting the report to a pdf works fine. Setting parameters (without) a data source too. But now i can't refresh the data in the reports given by a parameter (e.g. time).
    I know there are two methods to do this. Push and pull. I want to use the pull method, cause my program should exports different reports and i think it should be easier to handle this with this method.
    On my development environment is installed:
    Crystal Reports SP 4
    MS Visual Studio 2010 (coding with C# .NET)
    .NET Framework 4
    SAP Integration Kit
    Crystal Reports for Visual Studio 2010 SP1 - SDK libraries
    Crystal Reports for Visual Studio 2010 SP1 - Runtime 32 bit
    SAP GUI 7.20 (Compilation 3)
    The bex query is enabled for external use from ole db for olap. Do i have forget something else?
    Here is a part of my code:
            public ReportDocument doPullMethod(ReportDocument crReportDocument)
                TableLogOnInfo crTableLogOnInfo = crReportDocument.Database.Tables[0].LogOnInfo;
                ConnectionInfo crConnectionInfo = crTableLogOnInfo.ConnectionInfo;
                crConnectionInfo.Password = "*******";
                crReportDocument.SetDatabaseLogon(crConnectionInfo.UserID, crConnectionInfo.Password, crConnectionInfo.ServerName, crConnectionInfo.DatabaseName);
                MessageBox.Show(crConnectionInfo.UserID + " _ " + crConnectionInfo.Password + " _ " + crConnectionInfo.ServerName + " _ " + crConnectionInfo.DatabaseName);
                for (int i = 0; i < crReportDocument.Database.Tables.Count; i++)
                //    crReportDocument.Database.Tables<i>.ApplyLogOnInfo(crTableLogOnInfo);
                    MessageBox.Show("TestConnectivity: " + crReportDocument.Database.Tables<i>.TestConnectivity());
                return crReportDocument;
    Cause i'm using only one bex query, i know that the SetDatabaseLogon()-method should bring me the same result as the ApplyLogOnInfo()-method SAP Crystal Reports .NET API Guide
    Exists an order which i have to follow? First setting parameter and then set the login informations or backwards? Cause i also get the "Failed to load database information" exception, when i set a parameter and TestConnectivity() returns false.
    Do i have to activate the data refresh manually or will be the data refreshed automatically on export?
    I searched in this forum (.NET - SAP Crystal Reports) and found only this thread which according to my problem:
    [Re: Crystal report connects to BW RFC by .NET;
    The question is assumed answered.

    Hi Robin,
    There is a SAP Integration Kit you need to allow CR to connect to SAP data sources. There isn't one for CR for VS 2010 and I don't believe there are the various extra options available in the SDK, no SDK access to the DB driver.
    Possibly, Check the other post, download and run the app Ludek suggested, it will get the connection info for your report using RAS and then plug the output code into your code and see if that works. It should show the crdb_olap dll is the database driver, assuming that is the connection method you used when designing the report.
    Pay attention to the database dll in the output from that app and verify it is on your PC in: C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86
    If that doesn't work then.....
    The problem is, CR for VS 2010 ( version 13 ) is the runtime for BOE 4.0  ( version 14 ) which includes the Integration kit drivers on install. There is no standalone install of the database drivers. They are installed with CR 2011, which doesn't have a SDK included, CR for VS 2010 is also the Developer version for CR 2011.
    Because of the "custom" connection requirements there is no SDK or access to the BW datasource extra options....
    Also note that CR 2008 is not supported in VS 2010, it should work though as long as you stick to 2.0 -> 3.5 framework, no 4.0 Framework support in CR 2008 or BOE 4.0
    You may want to try the SAP Integration Kit forum to see if anyone has been able to make this work or contact your account manager to verify if there are any plans to do what you are doing....
    Don

Maybe you are looking for