SOS:How to solve "internal fatal error:load.cpp line6345"?

   hello,everybody. now i meet with a sharp problem in labview. when i try to save a .vi file in labview, sometimes an error information will happen which is "internal fatal error:"load.cpp", line6345". i have tried almost every way to solve this problem but falied at last.
   Can you tell me how to solve this problem? thank u all!

beryllan;
Let us know which version of LabVIEW you are using. After a quick search in here at the Discussion Forums, I found that problems with load.cpp were common in LabVIEW 6, (with special mentions to the Student Edition). If that's your case, try updating LabVIEW here.
Regards
Enrique
www.vartortech.com

Similar Messages

  • How to solve the fatal error 1603?

    Update installation failed when it run patching files.
    It shows fatal error 1603. How can I solve it?

    http://helpx.adobe.com/creative-suite/kb/error-1603-install-cs5-products.html

  • Internal fatal error: image.cpp

    Hi all
    For a couple of times this week (it was the first 2 times that this error occours) it appeared the error that you can see in the attached pic. I was watching a pretty large block diagram surfing it with the navigation window. I clicked several times the block diagram and the navigation window in order to adjust my view, when suddenly that error appeared. Then LV shut down. I launched the program again and it was all right. What was it? Some ideas? I don't want some critical error in my LV: i mean, i'm not talking about windows
    Kind regards
    I love the smell of napalm in the morning
    Attachments:
    errore fatale LV.jpg ‏71 KB

    This problem has been fixed in Labview 8.1. So i suggest you to upgrade (Labview 8.2 is the last version).
    If you want a work-around to the problem, here you have two possibilities:
    Hide the front panel before allowing the application to exit. You can do this by creating a property node for the VI and writing 'Hidden', or 'Minimized' to the FP.State property. If your activation of LabVIEW has event structures, you can place this code inside the This VI->Panel Close event. If you do not have event structures, you should disable the close glyph on the window border and implement the above code following your main application code.
    Convert your application back to a previous version of LabVIEW (such as version 7.0 or 7.1) which is not affected by this error.
    Ciao!

  • HOW TO SOLVE THE R6034 ERROR IN ITUNES INSTALATION

    I need toknow how to solve the R6034 error in itunes instalation becouse y can´t buk up muy phone

    How to solve this ?
    #import <UIKit/UIKit.h>
    int main(int argc, char *argv[]) {
        NSAutoreleasePool * pool = [[NSAutoreleasePool alloc] init];
       -> int retVal = UIApplicationMain(argc, argv, nil, nil);
        [pool release];
        return retVal;

  • How to solve Audition CS6 error "The amount of audio to burn will not fit on the CD........."?

    I have a brand new PC that is MORE than adequate. I have once succeeded in burning a CD after learning all about time tracks and merging them. (made a few with only ONE track)
    Two things:
    1) I find that I must add a CD marker at the end of the WAV because Audition CS6 erases whatever is the last CD marker I've made. Very frustrating but now I know I have to do this but I have no idea WHY!!
    2) Right now I have a WAV that is just over 1 hour and 3 minutes with a total of 637.74MB of info. When I try to export/burn a CD, I get an error message stating "The amount of audio to burn will not fit.......".  I am using TDK 700MB blanks with a Pioneer Blu-ray burner.
    Obviously it will fit.
    What am I doing wrong, all of a sudden?

    Hey ryclark,
    Thanks for responding. Something else is going on here.....
    Here's what I re-replied to our friend...
    Thanks for the response.
    When I built this computer last Nov/Dec, it was built with the second 
    fastest Intel 7i, quad-core chipset on an 64-bit ASUS motherboard. It's  running
    Win 7 Pro. It has a 500GB SSD "C" drive with another 14 TB of true hard 
    drive space. It is set up with 64 bit. I had been using Audition CS3 for  many
    years and even go back to it's origin: Cool Edit and Cool Edit Pro. My 
    learning curve was minimal, sans the CD burning, which I used other software
    for  which is now antiquated, so I need Audition for this. Between this and 
    IZotope 3 I've repaired and improved many a recording. All-in-all extremely 
    useful software.
    As for the idea "to burn it anyway", well the error message comes up and 
    that's it - if I "X" out of that message and try to burn again the message
    comes  back  - so Audition will not let me. It is convinced that this file is 
    longer than it really is, but only when I add track  marks to it!
    There are only 11 tracks.
    I was able to burn a CD of this same file but without all the track marks, 
    so the same exact file length/size will burn, only as the one track.
    I've also succeeded in burning other WAV's , both greater and smaller, with
    and without multiple track marks, without issue. Of course all with less 
    than the CD's max. capacity.
    This problem seems to be with this one file. I've even  re-made/re-recorded
    the file from scratch with no change. There's something else  going on here
    that I can't put my finger on. (I am "recording" LP's and making  personal
    CDs of them)
    Also, only from time to time, I have another error after burning a CD that 
    states it could not verify the CD. For this I assume it is the blank rather
    than AA? The first might burn without issue and with the second burn I 
    get the error. It is near the end of a stack of blanks, so.....
    As for the need to "mark the end" of the file makes a lot of sense but of 
    all the other CD track-marking software I've used, none needed one to do
    this,  but this IS Adobe after all.
    You'd think there might be a smidge of intuitiveness with Adobe, but maybe 
    not.
    - Mark
    In a message dated 8/2/2014 8:11:52 A.M. Eastern Daylight Time, 
    [email protected] writes:
    How  to solve Audition CS6 error "The amount of audio to burn will not fit
    on  the CD........."?
    created by ryclark (https://forums.adobe.com/people/ryclark)  in 
    Audition CS5.5, CS6 & CC - View the full  discussion
    (https://forums.adobe.com/message/6605916#6605916)

  • HT201405 how to solve time machine error-1

    how to solve time machine error-1

    I checked the pondini fixes and ended up doing the following - in case this could help someone else with OSX Lion and Time Capsule... http://pondini.org/TM/Troubleshooting.html
    First, I downloaded and used Airport Utility 5.6 instead of 6.1 - BTW, I had to attempt download and installation THREE times before the program actually installed.  Be persistant.
    Pondini #5: It's possible some names (of all things!) may be a problem.    See item C9.  I had to re-name my Mac, Time Capsule, network, etc... to remove all apostrophes and spaces.
    Pondini #7:  If you have WD SmartWare installed on Lion, it's not compatible, per RoaringApps, and there are reports it can cause this problem as well.   Use Western Digital's uninstaller, or delete the app from /Applications and the files com.wdc.WDDMservice.plist and com.wdc.WDSmartWareServer.plist from /Library/LaunchDaemons.   There may also be a file in Library/Application Support.
    I then had to shut down computer, unplug Time Capsule, unplug modem; plug everything in again, then reboot computer; then had to go to Apple- System Preferences- Network- and reselect my Time Capsule to connect to WiFi again.
    Then opened Time Machine preferences again and attempted back up - it worked!

  • How to solve the ASInstance error

    hello everyone,
    when i install the BIEE11g, I always met a same mistake, that is 'ASInstance install error'. then I lookup the log file, it writes 'ASInstance error, Error in starting opmn server. operation aborted because of a system call failure or internal error'. could you tell me how to solve it?
    if i choose to skip the error and continue to install, i could not to visit the http://localhost:7001/analytics and could not succee to run startall command in opmn.
    notes: my os is win xp sp3 and database vision is 11.2.0.1.0 and rcu is 1.1.5.0
    thank you very much.
    regards,
    phoeny

    hello everyone,
    when i install the BIEE11g, I always met a same mistake, that is 'ASInstance install error'. then I lookup the log file, it writes 'ASInstance error, Error in starting opmn server. operation aborted because of a system call failure or internal error'. could you tell me how to solve it?
    if i choose to skip the error and continue to install, i could not to visit the http://localhost:7001/analytics and could not succee to run startall command in opmn.
    notes: my os is win xp sp3 and database vision is 11.2.0.1.0 and rcu is 1.1.5.0
    thank you very much.
    regards,
    phoeny

  • How to simulate a Fatal Error ?

    Hello MDM Experts,
    On older version it was pretty easy to simulate Fatal Error by deleting some tables on repository. However using the 7.1.08 Version, this action can not be done anymore.
    Do you have any tips on how to simultate Fatal Error ?
    This would help our technical team to anticipate the behaviour of MDM on such circonstances.
    Thanks in advance for your Help
    Best Regards
    Cyril S

    Hi Cyril,
    Thanks for the details,I see your point.
    Suppose you talk of an incident which causes the system to abort operation when trying to import schema.
    One has to look into MDS logs\traces and see if what details are present for that error.
    If one gets that find out why did the system abort,one reason could be MDS overload.
    Then you can decrease the load by removing a few component maps from the schema and retry.
    If it works,You have 2 cases,one working and one not working and you also have RCA.
    The point I am trying to make here is its difficult to find exact issues,looking Logs/reports/traces give you hint.
    And you can get major help from MDM-BASIS area and tools.
    Tools like Wiley Introscope can help monitor the performance of system.Also it would be a healthy practice to take a dipstick of load and system behavior on timely basis.
    In case of few Fatal errors you just have to wait for system to crash and generate core file for analysis.
    Logs dont tell you the picture there.
    For Non Fatal errors a Repair certainly helps and reports help you to zero down on the errors and warnings present.
    I totally agree with you,one can anticipate most of the issues and be prepared for such issues in future.
    Please revert in case of a query.
    Thanks,
    Ravi

  • How to solve "Database inconsistent" error?

    Hi,
    when clicking on a task in my UWL i get this error. Why is that? How can i solve it?
    TIA
    Michael
    500   Internal Server Error           SAP NetWeaver Application Server/Java AS
    The initial exception that caused the request to fail, was:
    com.sap.bpem.tm.exception.TechnicalTaskException: Database inconsistent, please contact your system administrator
        at com.sap.bpem.tm.impl.TaskManagerImpl.identifyNoSuchTaskExceptionFlavor(TaskManagerImpl.java:1567)
        at com.sap.bpem.tm.impl.TaskManagerImpl.getTaskInstanceObject(TaskManagerImpl.java:1524)
        at com.sap.bpem.tm.impl.TaskManagerImpl.getTask(TaskManagerImpl.java:1032)
        at com.sap.bpem.tm.impl.TaskManagerBean.getTask(TaskManagerBean.java:79)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        ... 91 more
    See full exception chain for details.
    Failed to process request. Please contact your system administrator.
    While processing the current request, an exception occured which could not be handled by the application or the framework.
    If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
    For further information about the Web Dynpro error page, error analysis and a description of well-known error situations, see SAP note 1113811.
    System Environment
    Client
    Web Dynpro Client Type     HTML Client
    User agent     Mozilla/5.0 (Windows; U; Windows NT 5.1; de; rv:1.9.0.7) Gecko/2009021910 Firefox/3.0.7
    Client Type     ns7
    Client Type Profile     nn7
    ActiveX     disabled
    Java Applets     enabled
    Accessibility mode     disabled
    Rendering engine:     Lightspeed
    Inline CSS:      enabled
    Validate by rendering:      enabled
    Server
    Web Dynpro Runtime     vendor: 'sap.com', name: 'tc/wd/webdynpro', location: 'SAP AG', counter: '7.1101.20081121165726.0000', change number: '34307', codeline: NW711_01_REL
    J2EE Engine     7.11.3710.34306.20081117170308
    System ID (SID)     HNC
    Server Node ID     |5055250|50552|Server 00 00_50552|saphnc/10.213.20.68|SERVER|RUNNING
    Java VM     SAP Java 64-Bit Server VM, version:5.1.024, vendor: SAP AG
    Operating system     Windows 2003, version: 5.2, architecture: amd64
    Application
    Java EE Application (deployable object)     sap.com/tcbpemwdui~taskinstance
    Web Dynpro Application     ATaskExecution
    Request URI     /webdynpro/dispatcher/sap.com/tcbpemwdui~taskinstance/ATaskExecution
    Version     vendor: 'sap.com', name: 'tc/bpem/wdui/taskinstance', location: 'SAP AG', counter: '7.1101.20081107110357.0000', change number: '31'
    Session & Other
    Session Locale     de_DE
    Session Timezone     Central European Time
    Time of Failure     Tue Mar 24 12:18:45 CET 2009 (Java Time: 1237893525656)
    Session User     ClientUser(id=USER.PRIVATE_DATASOURCE.un:neumann, name=neumann)
    Client Session Id     p6E1GkmC7IqjpxmHR9bKm6ipRLUa3H83IAESI00A_SAP
    Client Window Id     WIDx1237893542193
    Application Session Id     pBsSrSGyXYyMkAL31ExbcA9YvaW5iZijHiiopfzm48oA
    Web Dynpro Code Generation Infos
    sap.com/tcbpemwdui~appcontainer
    WD web module webdynpro/resources/sap.com/tcbpemwdui~appcontainer: SapDictionaryGenerationCore     7.1101.20081107110357.0000 (release=NW711_01_REL, buildtime=2008-11-08T19:24:23+0000, changelist=31630, host=pwdfm245, is-central=true)
    WD web module webdynpro/resources/sap.com/tcbpemwdui~appcontainer: SapDictionaryGenerationTemplates     7.1101.20081107110357.0000 (release=NW711_01_REL, buildtime=2008-11-08T19:24:49+0000, changelist=31630, host=pwdfm245, is-central=true)
    WD web module webdynpro/resources/sap.com/tcbpemwdui~appcontainer: SapGenerationFrameworkCore     7.1101.20081107110357.0000
    WD web module webdynpro/resources/sap.com/tcbpemwdui~appcontainer: SapIdeWebDynproCheckLayer     7.1101.20081107110357.0000 (release=NW711_01_REL, buildtime=2008-11-08T19:36:35+0000, changelist=32179, host=pwdfm245, is-central=true)
    WD web module webdynpro/resources/sap.com/tcbpemwdui~appcontainer: SapMetamodelCommon     7.1101.20081107110357.0000 (release=NW711_01_REL, buildtime=2008-11-08T19:14:39+0000, changelist=32070, host=pwdfm245, is-central=true)
    WD web module webdynpro/resources/sap.com/tcbpemwdui~appcontainer: SapMetamodelCore     7.1101.20081107110357.0000 (release=NW711_01_REL, buildtime=2008-11-08T19:11:46+0000, changelist=32070, host=pwdfm245, is-central=true)
    WD web module webdynpro/resources/sap.com/tcbpemwdui~appcontainer: SapMetamodelDictionary     7.1101.20081107110357.0000 (release=NW711_01_REL, buildtime=2008-11-08T19:19:49+0000, changelist=31632, host=pwdfm245, is-central=true)
    WD web module webdynpro/resources/sap.com/tcbpemwdui~appcontainer: SapMetamodelWebDynpro     7.1101.20081107110357.0000 (release=NW711_01_REL, buildtime=2008-11-08T19:25:44+0000, changelist=32739, host=pwdfm245, is-central=true)
    WD web module webdynpro/resources/sap.com/tcbpemwdui~appcontainer: SapWebDynproGenerationCore     7.1101.20081107110357.0000 (release=NW711_01_REL, buildtime=2008-11-08T19:36:46+0000, changelist=32179, host=pwdfm245, is-central=true)
    WD web module webdynpro/resources/sap.com/tcbpemwdui~appcontainer: SapWebDynproGenerationTemplates     7.1101.20081107110357.0000 (release=NW711_01_REL, buildtime=2008-11-08T19:37:12+0000, changelist=32179, host=pwdfm245, is-central=true)
    WD web module webdynpro/resources/sap.com/tcbpemwdui~appcontainer: SapWebDynproRuntimeGen     7.1101.20081107110357.0000 (release=NW711_01_REL, buildtime=2008-11-08T19:34:49+0000, changelist=32183, host=pwdfm245, is-central=true)
    sap.com/tcbpemwdui~attachments
    WD web module webdynpro/resources/sap.com/tcbpemwdui~attachments: SapDictionaryGenerationCore     7.1101.20081107110357.0000 (release=NW711_01_REL, buildtime=2008-11-08T19:24:23+0000, changelist=31630, host=pwdfm245, is-central=true)
    WD web module webdynpro/resources/sap.com/tcbpemwdui~attachments: SapDictionaryGenerationTemplates     7.1101.20081107110357.0000 (release=NW711_01_REL, buildtime=2008-11-08T19:24:49+0000, changelist=31630, host=pwdfm245, is-central=true)
    WD web module webdynpro/resources/sap.com/tcbpemwdui~attachments: SapGenerationFrameworkCore     7.1101.20081107110357.0000
    WD web module webdynpro/resources/sap.com/tcbpemwdui~attachments: SapIdeWebDynproCheckLayer     7.1101.20081107110357.0000 (release=NW711_01_REL, buildtime=2008-11-08T19:36:35+0000, changelist=32179, host=pwdfm245, is-central=true)
    WD web module webdynpro/resources/sap.com/tcbpemwdui~attachments: SapMetamodelCommon     7.1101.20081107110357.0000 (release=NW711_01_REL, buildtime=2008-11-08T19:14:39+0000, changelist=32070, host=pwdfm245, is-central=true)
    WD web module webdynpro/resources/sap.com/tcbpemwdui~attachments: SapMetamodelCore     7.1101.20081107110357.0000 (release=NW711_01_REL, buildtime=2008-11-08T19:11:46+0000, changelist=32070, host=pwdfm245, is-central=true)
    WD web module webdynpro/resources/sap.com/tcbpemwdui~attachments: SapMetamodelDictionary     7.1101.20081107110357.0000 (release=NW711_01_REL, buildtime=2008-11-08T19:19:49+0000, changelist=31632, host=pwdfm245, is-central=true)
    WD web module webdynpro/resources/sap.com/tcbpemwdui~attachments: SapMetamodelWebDynpro     7.1101.20081107110357.0000 (release=NW711_01_REL, buildtime=2008-11-08T19:25:44+0000, changelist=32739, host=pwdfm245, is-central=true)
    WD web module webdynpro/resources/sap.com/tcbpemwdui~attachments: SapWebDynproGenerationCore     7.1101.20081107110357.0000 (release=NW711_01_REL, buildtime=2008-11-08T19:36:46+0000, changelist=32179, host=pwdfm245, is-central=true)
    WD web module webdynpro/resources/sap.com/tcbpemwdui~attachments: SapWebDynproGenerationTemplates     7.1101.20081107110357.0000 (release=NW711_01_REL, buildtime=2008-11-08T19:37:12+0000, changelist=32179, host=pwdfm245, is-central=true)
    WD web module webdynpro/resources/sap.com/tcbpemwdui~attachments: SapWebDynproRuntimeGen     7.1101.20081107110357.0000 (release=NW711_01_REL, buildtime=2008-11-08T19:34:49+0000, changelist=32183, host=pwdfm245, is-central=true)
    sap.com/tcbpemwdui~notes

    WD web module webdynpro/resources/sap.com/tcbpemwdui~notes: SapDictionaryGenerationCore     7.1101.20081107110357.0000 (release=NW711_01_REL, buildtime=2008-11-08T19:24:23+0000, changelist=31630, host=pwdfm245, is-central=true)
    WD web module webdynpro/resources/sap.com/tcbpemwdui~notes: SapDictionaryGenerationTemplates     7.1101.20081107110357.0000 (release=NW711_01_REL, buildtime=2008-11-08T19:24:49+0000, changelist=31630, host=pwdfm245, is-central=true)
    WD web module webdynpro/resources/sap.com/tcbpemwdui~notes: SapGenerationFrameworkCore     7.1101.20081107110357.0000
    WD web module webdynpro/resources/sap.com/tcbpemwdui~notes: SapIdeWebDynproCheckLayer     7.1101.20081107110357.0000 (release=NW711_01_REL, buildtime=2008-11-08T19:36:35+0000, changelist=32179, host=pwdfm245, is-central=true)
    WD web module webdynpro/resources/sap.com/tcbpemwdui~notes: SapMetamodelCommon     7.1101.20081107110357.0000 (release=NW711_01_REL, buildtime=2008-11-08T19:14:39+0000, changelist=32070, host=pwdfm245, is-central=true)
    WD web module webdynpro/resources/sap.com/tcbpemwdui~notes: SapMetamodelCore     7.1101.20081107110357.0000 (release=NW711_01_REL, buildtime=2008-11-08T19:11:46+0000, changelist=32070, host=pwdfm245, is-central=true)
    WD web module webdynpro/resources/sap.com/tcbpemwdui~notes: SapMetamodelDictionary     7.1101.20081107110357.0000 (release=NW711_01_REL, buildtime=2008-11-08T19:19:49+0000, changelist=31632, host=pwdfm245, is-central=true)
    WD web module webdynpro/resources/sap.com/tcbpemwdui~notes: SapMetamodelWebDynpro     7.1101.20081107110357.0000 (release=NW711_01_REL, buildtime=2008-11-08T19:25:44+0000, changelist=32739, host=pwdfm245, is-central=true)
    WD web module webdynpro/resources/sap.com/tcbpemwdui~notes: SapWebDynproGenerationCore     7.1101.20081107110357.0000 (release=NW711_01_REL, buildtime=2008-11-08T19:36:46+0000, changelist=32179, host=pwdfm245, is-central=true)
    WD web module webdynpro/resources/sap.com/tcbpemwdui~notes: SapWebDynproGenerationTemplates     7.1101.20081107110357.0000 (release=NW711_01_REL, buildtime=2008-11-08T19:37:12+0000, changelist=32179, host=pwdfm245, is-central=true)
    WD web module webdynpro/resources/sap.com/tcbpemwdui~notes: SapWebDynproRuntimeGen     7.1101.20081107110357.0000 (release=NW711_01_REL, buildtime=2008-11-08T19:34:49+0000, changelist=32183, host=pwdfm245, is-central=true)
    sap.com/tcbpemwdui~taskinstance
    WD web module webdynpro/resources/sap.com/tcbpemwdui~taskinstance: SapDictionaryGenerationCore     7.1101.20081107110357.0000 (release=NW711_01_REL, buildtime=2008-11-08T19:24:23+0000, changelist=31630, host=pwdfm245, is-central=true)
    WD web module webdynpro/resources/sap.com/tcbpemwdui~taskinstance: SapDictionaryGenerationTemplates     7.1101.20081107110357.0000 (release=NW711_01_REL, buildtime=2008-11-08T19:24:49+0000, changelist=31630, host=pwdfm245, is-central=true)
    WD web module webdynpro/resources/sap.com/tcbpemwdui~taskinstance: SapGenerationFrameworkCore     7.1101.20081107110357.0000
    WD web module webdynpro/resources/sap.com/tcbpemwdui~taskinstance: SapIdeWebDynproCheckLayer     7.1101.20081107110357.0000 (release=NW711_01_REL, buildtime=2008-11-08T19:36:35+0000, changelist=32179, host=pwdfm245, is-central=true)
    WD web module webdynpro/resources/sap.com/tcbpemwdui~taskinstance: SapMetamodelCommon     7.1101.20081107110357.0000 (release=NW711_01_REL, buildtime=2008-11-08T19:14:39+0000, changelist=32070, host=pwdfm245, is-central=true)
    WD web module webdynpro/resources/sap.com/tcbpemwdui~taskinstance: SapMetamodelCore     7.1101.20081107110357.0000 (release=NW711_01_REL, buildtime=2008-11-08T19:11:46+0000, changelist=32070, host=pwdfm245, is-central=true)
    WD web module webdynpro/resources/sap.com/tcbpemwdui~taskinstance: SapMetamodelDictionary     7.1101.20081107110357.0000 (release=NW711_01_REL, buildtime=2008-11-08T19:19:49+0000, changelist=31632, host=pwdfm245, is-central=true)
    WD web module webdynpro/resources/sap.com/tcbpemwdui~taskinstance: SapMetamodelWebDynpro     7.1101.20081107110357.0000 (release=NW711_01_REL, buildtime=2008-11-08T19:25:44+0000, changelist=32739, host=pwdfm245, is-central=true)
    WD web module webdynpro/resources/sap.com/tcbpemwdui~taskinstance: SapWebDynproGenerationCore     7.1101.20081107110357.0000 (release=NW711_01_REL, buildtime=2008-11-08T19:36:46+0000, changelist=32179, host=pwdfm245, is-central=true)
    WD web module webdynpro/resources/sap.com/tcbpemwdui~taskinstance: SapWebDynproGenerationTemplates     7.1101.20081107110357.0000 (release=NW711_01_REL, buildtime=2008-11-08T19:37:12+0000, changelist=32179, host=pwdfm245, is-central=true)
    WD web module webdynpro/resources/sap.com/tcbpemwdui~taskinstance: SapWebDynproRuntimeGen     7.1101.20081107110357.0000 (release=NW711_01_REL, buildtime=2008-11-08T19:34:49+0000, changelist=32183, host=pwdfm245, is-central=true)
    sap.com/tcwdapi
    WD web module webdynpro/resources/sap.com/tcwdapi: SapDictionaryGenerationCore     7.1101.20081121165726.0000 (release=NW711_01_REL, buildtime=2008-11-22T19:30:00+0000, changelist=31630, host=pwdfm245, is-central=true)
    WD web module webdynpro/resources/sap.com/tcwdapi: SapDictionaryGenerationTemplates     7.1101.20081121165726.0000 (release=NW711_01_REL, buildtime=2008-11-22T19:30:16+0000, changelist=31630, host=pwdfm245, is-central=true)
    WD web module webdynpro/resources/sap.com/tcwdapi: SapGenerationFrameworkCore     7.1101.20081121165726.0000
    WD web module webdynpro/resources/sap.com/tcwdapi: SapIdeWebDynproCheckLayer     7.1101.20081121165726.0000 (release=NW711_01_REL, buildtime=2008-11-22T19:43:48+0000, changelist=32179, host=pwdfm245, is-central=true)
    WD web module webdynpro/resources/sap.com/tcwdapi: SapMetamodelCommon     7.1101.20081121165726.0000 (release=NW711_01_REL, buildtime=2008-11-22T19:21:10+0000, changelist=32070, host=pwdfm245, is-central=true)
    WD web module webdynpro/resources/sap.com/tcwdapi: SapMetamodelCore     7.1101.20081121165726.0000 (release=NW711_01_REL, buildtime=2008-11-22T19:17:50+0000, changelist=32070, host=pwdfm245, is-central=true)
    WD web module webdynpro/resources/sap.com/tcwdapi: SapMetamodelDictionary     7.1101.20081121165726.0000 (release=NW711_01_REL, buildtime=2008-11-22T19:25:15+0000, changelist=31632, host=pwdfm245, is-central=true)
    WD web module webdynpro/resources/sap.com/tcwdapi: SapMetamodelWebDynpro     7.1101.20081121165726.0000 (release=NW711_01_REL, buildtime=2008-11-22T19:31:48+0000, changelist=32739, host=pwdfm245, is-central=true)
    WD web module webdynpro/resources/sap.com/tcwdapi: SapWebDynproGenerationCore     7.1101.20081121165726.0000 (release=NW711_01_REL, buildtime=2008-11-22T19:43:58+0000, changelist=32179, host=pwdfm245, is-central=true)
    WD web module webdynpro/resources/sap.com/tcwdapi: SapWebDynproGenerationTemplates     7.1101.20081121165726.0000 (release=NW711_01_REL, buildtime=2008-11-22T19:44:06+0000, changelist=32179, host=pwdfm245, is-central=true)
    WD web module webdynpro/resources/sap.com/tcwdapi: SapWebDynproRuntimeGen     7.1101.20081121165726.0000 (release=NW711_01_REL, buildtime=2008-11-22T19:42:01+0000, changelist=32183, host=pwdfm245, is-central=true)
    Detailed Error Information
    Detailed Exception Chain
    com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Exception was thrown in preprocessing phase of application session ApplicationSession(id=pBsSrSGyXYyMkAL31ExbcA9YvaW5iZijHiiopfzm48oA, name=com.sap.tc.bpem.wdui.taskinstance.ataskexecution.ATaskExecution). The causing exception is nested. RID=8a21d490186511de8a38000c2932868d
      at com.sap.tc.webdynpro.clientserver.session.ClientSession.doPreprocessing(ClientSession.java:680)
      at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:239)
      at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:258)
      at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.delegateToRequestManager(AbstractExecutionContextDispatcher.java:202)
      at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.DispatchHandlerForRequestManager.doService(DispatchHandlerForRequestManager.java:38)
      at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.AbstractDispatchHandler.service(AbstractDispatchHandler.java:127)
      at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:95)
      at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.ExecutionContextDispatcher.dispatchToRequestManager(ExecutionContextDispatcher.java:140)
      at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:92)
      at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:104)
      at com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doContent(AbstractDispatcherServlet.java:87)
      at com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doPost(AbstractDispatcherServlet.java:61)
      at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
      at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
      at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:140)
      at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:37)
      at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:466)
      at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:291)
      at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:396)
      at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:385)
      at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:48)
      at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
      at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:76)
      at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
      at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:240)
      at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
      at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:78)
      at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
      at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
      at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
      at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
      at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)

  • How to print only fatal error in log file in tomcat4.1

    Hi all ,i m using tomcat4.1
    1> i want to print only fatal error in log file ,but it print all thing in log file ,how i can avoid it(because i think this process is consuming my resource)
    assume below ip address is corect:
    this is exact printing in my log file
    .12.2.3.3  - - [24/Oct/2007:00:00:00 5050] "GET /menu/ir.jsp HTTP/1.1" 200 2828
    12.2.3.3  - - [24/Oct/2007:00:00:00 5050] "GET /menu/bottomAdv.jsp HTTP/1.1" 200 528
    12.2.3.3  - - [24/Oct/2007:00:00:02 5050] "GET /menu/alerts.jsp HTTP/1.1" 200 323
    12.2.3.3  - - [24/Oct/2007:00:00:02 5050] "GET /alerts/createAlertShow.jsp HTTP/1.1" 200 26140
    123.2.3. - - [24/Oct/2007:00:00:05 5050] "GET /menu/getsensex.jsp HTTP/1.1" 200 642
    12.2.3.3 - - [24/Oct/2007:00:00:05 5050] "GET /menu/latestRecommendation.jsp HTTP/1.1" 200 5210
    12.2.3.3 - - [24/Oct/2007:00:00:05 5050] "GET /portfolio/watchlist/displayWatchlistItemsShow.jsp?watchlistId=20070509013642953_1&watchlistName=First&refreshRate=900&flag=1 HTTP/1.1" 500 7257
    12.2.3.3  - - [24/Oct/2007:00:00:05 5050] "GET /menu/iwealthNewsScroller.jsp HTTP/1.1" 200 2828
    112.23.3  - - [24/Oct/2007:00:00:06 5050] "GET /menu/alerts.jsp HTTP/1.1" 200 323
    112.23.3 - - [24/Oct/2007:00:00:06 5050] "GET /menu/bottomAdv.jsp HTTP/1.1" 200 528
    12.2.3.3  - - [24/Oct/2007:00:00:07 5050] "GET /menu/alerts.jsp HTTP/1.0" 200 323
    12.2.3.3 - - [24/Oct/2007:00:00:09 5050] "POST /Transaction/equity/modifyConfirmShow.jsp?DelId=0 HTTP/1.1" 200 28661
    12.2.3.3  - - [24/Oct/2007:00:00:09 5050] "GET /menu/getsensex.jsp HTTP/1.1" 200 6422>what will happen if i change timestamp="false" and what is the significance of verbosity="1" or "2" or "3" ,or "4" and what happen if i change debug="1" or other in below code
    <Logger className="org.apache.catalina.logger.FileLogger" debug="0" directory="logs" prefix="www.xyz_log." suffix=".txt" timestamp="true" verbosity="4"/>Edited by: Deepak23 on Oct 24, 2007 10:41 PM
    Edited by: Deepak23 on Oct 24, 2007 11:16 PM

    One of my standard answers (which will explain the use of Directory Objects)...
    The UTL_FILE_DIR parameter has been deprecated by oracle in favour of direcory objects because of it's security problems.
    The correct thing to do is to create a directory object e.g.:
    CREATE OR REPLACE DIRECTORY mydir AS 'c:\myfiles';Note: This does not create the directory on the file system. You have to do that yourself and ensure that oracle has permission to read/write to that file system directory.
    Then, grant permission to the users who require access e.g....
    GRANT READ,WRITE ON DIRECTORY mydir TO myuser;Then use that directory object inside your FOPEN statement e.g.
    fh := UTL_FILE.FOPEN('MYDIR', 'myfile.txt', 'r');Note: You MUST specify the directory object name in quotes and in UPPER case for this to work as it is a string that is referring to a database object name which will have been stored in uppercase by default.

  • How to solve the 404 error

    Hi,
    How to catch or solve the 404 error in application.
    Some time we are giving some file name but that file is not avialable at that time it will give 404 error. how to avoid this error.
    If 404 error comes i want call some other file. Is it posible.
    Thanks Advance.

    Yes, this is because IE 5.5 (?) and higher have this wacky "Show friendly HTTP error messages" setting. You can disable this by going to tools -> internet options -> advanced and unchecking "Show friendly HTTP error messages". However as the default IE setting has "Show friendly HTTP error messages" enabled this isn't a good solution.
    I believe that if your error page is less than a certain size (in bytes) then IE defaults to it's own error page when "Show friendly HTTP error messages" are enabled. This size is something like 512 bytes or fewer in length.
    So basically try making your error page larger (more than 512 bytes in size) and see if that works.

  • How to solve the emca error

    how to solve the warning and severe error....................
    [oracle@ip-********* Oracle11g_R2]$ emca -deconfig dbcontrol db -repos drop
    STARTED EMCA at Mar 29, 2012 10:20:41 PM
    EM Configuration Assistant, Version 11.2.0.0.2 Production
    Copyright (c) 2003, 2005, Oracle. All rights reserved.
    Enter the following information:
    Database SID: testdb11g3
    Listener port number: 1521
    Password for SYS user:
    Password for SYSMAN user:
    Do you wish to continue? [yes(Y)/no(N)]: y
    Mar 29, 2012 10:22:13 PM oracle.sysman.emcp.EMConfig perform
    INFO: This operation is being logged at /u02/oracle/Oracle11g_R2/cfgtoollogs/emca/testdb11g3/emca_2012_03_29_22_20_40.log.
    Mar 29, 2012 10:22:13 PM oracle.sysman.emcp.EMDBPreConfig performDeconfiguration
    WARNING: EM is not configured for this database. No EM-specific actions can be performed.
    Mar 29, 2012 10:22:13 PM oracle.sysman.emcp.EMConfig perform
    SEVERE: Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM
    Configuration Assistant again .
    Refer to the log file at /u02/oracle/Oracle11g_R2/cfgtoollogs/emca/testdb11g3/emca_2012_03_29_22_20_40.log for more details.
    Could not complete the configuration. Refer to the log file at
    /u02/oracle/Oracle11g_R2/cfgtoollogs/emca/testdb11g3/emca_2012_03_29_22_20_40.log for more details.
    [oracle@ip-******* Oracle11g_R2]$ cd

    tried but getting the same error.............
    [oracle@ip-10-68-199-69 oracle]$ lsnrctl start
    LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 29-MAR-2012 23:37:21
    Copyright (c) 1991, 2009, Oracle. All rights reserved.
    Starting /u02/oracle/Oracle11g_R2/product/11.2.0/dbhome_1/bin/tnslsnr: please wait...
    TNSLSNR for Linux: Version 11.2.0.1.0 - Production
    System parameter file is /u02/oracle/Oracle11g_R2/product/11.2.0/dbhome_1/network/admin/listener.ora
    Log messages written to /u02/oracle/Oracle11g_R2/diag/tnslsnr/ip-10-68-199-69/listener/alert/log.xml
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
    Start Date 29-MAR-2012 23:37:21
    Uptime 0 days 0 hr. 0 min. 0 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /u02/oracle/Oracle11g_R2/product/11.2.0/dbhome_1/network/admin/listener.ora
    Listener Log File /u02/oracle/Oracle11g_R2/diag/tnslsnr/ip-10-68-199-69/listener/alert/log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
    The listener supports no services
    The command completed successfully
    [oracle@ip-10-68-199-69 oracle]$ sqlplus
    SQL*Plus: Release 11.2.0.1.0 Production on Thu Mar 29 23:37:34 2012
    Copyright (c) 1982, 2009, Oracle. All rights reserved.
    Enter user-name: sys/Ashwin
    ERROR:
    ORA-28009: connection as SYS should be as SYSDBA or SYSOPER
    Enter user-name: sys/Ashwin as sysdba
    Connected to:
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    SQL> startup
    ORA-01081: cannot start already-running ORACLE - shut it down first
    SQL> shutdown abort
    ORACLE instance shut down.
    SQL> startup
    ORACLE instance started.
    Total System Global Area 1603411968 bytes
    Fixed Size 2213776 bytes
    Variable Size 402655344 bytes
    Database Buffers 1191182336 bytes
    Redo Buffers 7360512 bytes
    Database mounted.
    Database opened.
    SQL> exit
    SQL> exit
    Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    [oracle@ip-10-68-199-69 oracle]$ emca -deconfig dbcontrol db -repos drop
    STARTED EMCA at Mar 29, 2012 11:55:28 PM
    EM Configuration Assistant, Version 11.2.0.0.2 Production
    Copyright (c) 2003, 2005, Oracle. All rights reserved.
    Enter the following information:
    Database SID: testdb11g3
    Listener port number: 1521
    Password for SYS user:
    Password for SYSMAN user:
    Do you wish to continue? [yes(Y)/no(N)]: y
    Mar 29, 2012 11:55:57 PM oracle.sysman.emcp.EMConfig perform
    INFO: This operation is being logged at /u02/oracle/Oracle11g_R2/cfgtoollogs/emca/testdb11g3/emca_2012_03_29_23_55_27.log.
    Mar 29, 2012 11:55:57 PM oracle.sysman.emcp.EMDBPreConfig performDeconfiguration
    WARNING: EM is not configured for this database. No EM-specific actions can be performed.
    Mar 29, 2012 11:55:57 PM oracle.sysman.emcp.EMConfig perform
    SEVERE: Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM Configuration Assistant again .
    Refer to the log file at /u02/oracle/Oracle11g_R2/cfgtoollogs/emca/testdb11g3/emca_2012_03_29_23_55_27.log for more details.
    Could not complete the configuration. Refer to the log file at /u02/oracle/Oracle11g_R2/cfgtoollogs/emca/testdb11g3/emca_2012_03_29_23_55_27.log for more details.

  • How to solve mutating table error?

    I compiled the trigger below successfully:
    CREATE OR REPLACE TRIGGER avail_products
    BEFORE INSERT ON orders_tbl
    FOR EACH ROW
    DECLARE
    m_prodqty products_tbl.prod_qty%TYPE;
    m_ordered orders_tbl.ord_qty%TYPE;
    m_prodid orders_tbl.prod_id%TYPE;
    BEGIN
    SELECT p.prod_qty, o.ord_qty, o.prod_id
    INTO m_prodqty, m_ordered, m_prodid
    FROM products_tbl p, orders_tbl o
    WHERE ord_num=:NEW.ord_num;
    IF m_prodqty>=m_ordered THEN
    UPDATE products_tbl
    SET prod_qty=prod_qty-m_ordered
    WHERE prod_id=m_prodid;
    ELSE
    RAISE_APPLICATION_ERROR(-20101,'Product is not available');
    END IF;
    END;
    However, when I run my PL/SQL block as follows:
    DECLARE
    v_max NUMBER;
    BEGIN
    SELECT MAX(ord_num)+1
    INTO v_max
    FROM orders_tbl;
    INSERT INTO orders_tbl(ord_num, cust_id, prod_id, ord_qty, ord_date, dvy_date, refund)
    VALUES (v_max, &cust_id, &prod_id, &ord_qty, '&ord_date', '&dvy_date',0);
    COMMIT;
    END;
    UPDATE orders_tbl
    SET refund=0.1*(SELECT price FROM products_tbl WHERE prod_id=(SELECT prod_id FROM orders_tbl WHERE ord_num=(SELECT MAX(ord_num) FROM orders_tbl)))
    WHERE ord_num = (SELECT MAX(ord_num) FROM orders_tbl) AND dvy_date>ord_date+3;
    COMMIT;
    It gives me these errors:
    ERROR at line 1:
    ORA-01403: no data found
    ORA-01403: no data found
    ORA-06512: at "SYSTEM.AVAIL_PRODUCTS", line 9
    ORA-04088: error during execution of trigger 'SYSTEM.AVAIL_PRODUCTS'
    ORA-06512: at line 10
    I try to debug it again and again but still can't find the mistake. So I change the trigger option to AFTER INSERT, then I got the error message that the table is mutating and trigger migh not see it. Anyone know how to solve this problem?
    ERROR at line 2:
    ORA-04091: table SYSTEM.ORDERS_TBL is mutating, trigger/function may not see it
    ORA-06512: at "SYSTEM.AVAIL_PRODUCTS", line 13
    ORA-04088: error during execution of trigger 'SYSTEM.AVAIL_PRODUCTS'
    null

    This extract from an earlier post might be of help:
    You can solve this problem by using following thing
    1)create a view on same table with all fields
    and write trigger on table (insert,update or delete ) while inserting or updating or deleting row from table read from view.
    (Mutating error come when you are reading from one table and want to update,insert or delete row of same table).
    2)create a temporary table(but it is possible in 8i onword only) same as table on which you want to write trigger,while updating,inserting or deleting rows of table read from temporary table and after your work is over temporary table auotomatically drop (see proper command in oracle documentation to create temporary table).
    null

  • Understanding how to solve an SQL error

    If any one has an idea of how to solve an error like this,kindly tell me what to do.Please.
    Msg 8120, Level 16, State 1, Line 1
    Column 'Members.Memb_contact' is invalid in the select list because it is not contained in either an aggregate function or the GROUP BY clause.

    If any one has an idea of how to solve an error like this,kindly tell me what to do.Please.
    Msg 8120, Level 16, State 1, Line 1
    Column 'Members.Memb_contact' is invalid in the select list because it is not contained in either an aggregate function or the GROUP BY clause.
    Using the given info only thing we can suggest is to add Members.Memb_contact to the GROUP BY clause. But that may not give you the desired result. So unless you give us some sample data and explain what you want as output  we may not be able to give you
    the best solution.
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • TS3297 How to solve -42110 unknown error?

    Please, how can I solve -42110 unknown error?
    Thanks

    Try the following user tip:
    iTunes for Windows 11.0.2.25 and 11.0.2.26: "Unknown error -42110" messages when launching iTunes

Maybe you are looking for

  • Hide Calendars in iCal

    Hi there, Does anyone know if there is a way to hide calendars in iCal on the iPhone? I have an Automator calendar that I just don't need to see in every day. Can I get rid of it?

  • Can't login to mail server

    Hello everyone, I'm trying to access the mail server through squirrelmail and through the Mail application. I turned on IMAP and POP access, set up squirrelmail according to the instructions, and set up an account with mail services enabled. However,

  • No luck in booting up

    I Mac 10.2.8   Mac OS X (10.2.x)   none

  • HP all in one: can I connect a non-wireless mouse to the computer

    I have an all-in-one desktop computer (HP pavilion with Windows 8) with wireless keyboard and wireless mouse. What happens if the mouse drops to the floor and breaks? Do I need a new mouse or can I connect a normal mouse with a USB to the computer? O

  • Super complicated query

    Hi. I have this query requirement: public class Message implements Serializable {     private Long id;     private Subject sender;     private Subject receiver; }btw Subject has a "name" and "id" the query shall select the "other person" engaged in c