SOS I am in trouble Installing Forms Server on Windows 2000 Server

I need advice on installation of Forms Server on Windows 2000 Server. Is Forms Server only meant for Windows NT. Since Windows 2000 Server is an extention of Windows NT there could be a way out which I am not aware of. On installation of Forms Server I get message that Forms Server components can work only on Windows NT 4.0 Service pack 5 or higher. Please Help
Thankyou

Hi,
Did not try W2000 Adv Server.
However...Forms Server 6i runs on W2000 Pro in combination with patch1
HTH
Martin

Similar Messages

Problem in installing Forms 6 on Windows 2000

I have problem in installing forms 6 on windows 2000.
Please advise me.
null

Hello,
I've been using Dev 2000 ver 6i for several months sucessfully on Win 2K RC2. The compiled .fmx's work fine with the ver 6.0 runtime environment under NT 4.0.
The only problem is that the Forms Server won't work till the 1st patch set comes out
(only Oracle knows when!) , so you can't test or deploy the forms as web apps on Win 2K yet. OAS 4.0 appears to work ok on Win 2K.
I have been using the Beta version of Dev 6i and will upgrade to the release version eventually, probably when the patch comes out.
null

Installing Forms Server on Windows 2000

We installed Forms Server 6i on Windows 2000. We completed the installation successfully. When we clicked on the 'Run the Form on the Web.', it gives 'This page cannot be displayed.' error. We tried this twice, but getting same error.
Any suggestions/help is greatly appreciated.
Thanks
VL.

Do you have your web server installed too?
forms server works in conjunction with your web server.
Make sure you have done the following...
Web server is listening on port 80
Forms server is running in HTTP mode. ( You may need to stop and restart the forms service in win2000 if you change this from socket in the registry )
You must also set up your virtual directorys on your web server. I used the microsoft internet information server that comes with win2000. It's an add on component on the disk. Oracle would suggest you use Oracle 9i application server ( Which is rebadged Apache )
Forms server is running on port 9000. Also set in the registry.
You also edit the in the formsweb.cfg file in <ORACLE_HOME>\forms60\server
Make sure HTTP mode is set in this too. You can also change various params such as the applet size etc. I would recommend the Oracle look and feel and run in separate windows options.
All the forms tester does is run a bit of cgi which will dynamically change the base HTML file in <ORACLE_HOME>\forms60\sever.
You will notice there is one file which is baseie and basejint. The cgi will choose to use the one depending on if you choose to use jinitiator or ie50=native.
When you go live can maually edit these files depending on what java viutual machine you choose. You can place this file in your web site root as defaut.htm or whatever you want and it will serve you app without using the cgi html generator.
Sorry if parts of this you know but it took me weeks of work to set this up. The Oracle documentation is not very well put together.
I have read nearly every line of the damn stuff.
Please e-mail me if you have any queries as I may have not made sense in places.
Oliver
null

Why can i install forms server properly in windows xp?

I guess i haven't installed FORMS SERVER properly, because in my \developer\bin\ i cant find "ifsrv60.exe"
the installation prompts me that if i have OEM (oracle enterprise manager) (which i think is ORACLE 9.2 ENTERPRISE EDITION) i should select NO, to avoid creating that service... so i always choose "NO".
I've tried choosing "YES" twice, even in SAFE MODE, and it crashes, saying something about "ifsrv60.exe -install"...and something about a "spawn" or something.
i wanna test if all works but without my "forms server" i guess i cant test it right? what should i do?
also, when installing i chose "server installation", then "web deployment" and then "single computer".
help me out

Hi
There is a special version for windows XP i dont remember the exact number right now but you have to install from that specific cd and plus you need to install patches 13.
If i understand you correctly, you are not able to connect to database? if so, you need to configure the tnsnames.ora file. you can use the Net8 easy config from start/programs/$oraclehome$.
or you can manually set it from Oraclehome$\net80\admin\tnsnames.ora
set it as:
<service name> =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = <machine name)(PORT = 1521))
(CONNECT_DATA = (SID = <SID>))
I suggest you de-install everything you have installed previously, and start fresh.
Hope this helps
Regards
Tony

Having trouble installing ProIX on new Windows 8 machine after XP crash. Get almost ll of the way through and get an error box ... contact system support. Only way out is to abort and then it un-installs. Wondering if a licensing max issue since we did

having trouble installing ProIX on new Windows 8 machine after XP crash. Get almost ll of the way through and get an error box ... contact system support. Only way out is to abort and then it un-installs. Wondering if a licensing max issue since we didn't get an opportunity to uninstall off of crashed machine?

Hey robr72339266,
With a single user license, you can install Acrobat on maximum two computers, say, your laptop at work and desktop at office.
But, you cannot use Acrobat on both the machines simultaneously.
You will first need to deactivate Acrobat from the old machine, then install and activate the software on the new OS with the same serial key.
Please Contact | Adobe to seek help on the same.
Regards,
Anubha

Forms Developer for Windows 2000

I have installed Oracle 9iAS on Windows 2000 OS. Now I want to install Forms & Reports Developer 6i on the same server to develope few forms & reports and finally I want to deploy it on Portal.
My question is, should I go ahead with installation of Forms & Reports ? Will it demage my current setup ? I don't want to disturb my running Oracle Database , 9iAS. Any suggestion ?
Thanks,
Vipul

Hari,
check this link
http://otn.oracle.com/software/htdocs/devlic.html?/software/products/forms/htdocs/winsoft.html
You get to it through otn.oracle.com/products/forms --> Software link
Frank

Cannot install Netweaver CE on Windows 2000 OS - SAP note says I can!!!!!!

Hi ,
I cannot install Netweaver CE on Windows 2000 OS, but SAP note says I can... Can anyone reply back if there is any workaround?
Thanks
Som

Hi Som,
Netweaver CE is supported by following Windows series:
Windows XP Professional (Service Pack 2) or Windows 2003 Server (Service Pack 1)
The version has also been tested successfully with Windows 2000 (SP3) and Windows XP (SP1), but is certified only for the two Windows versions above (Note: If you use a Windows XP account without a password , SAP Management Console can not start/stop your instance via Web Service - use system services instead)
For more on Netweaver CE installation check this:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1011818d-1abe-2910-5897-f72eb59c951a
Regards,
Subhasha

Installing Oracle 8i on WIndows 2000

I have installed Oracle 8i on WIndows 2000, and I want it
configured to work locally on one machine. I get it installed
with no problem with the seeded database. When I try to log
into SQL*Plus as anything, i.e. SYSTEM/MANAGER or SCOTT/TIGER or
SYS/CHANGE_ON_INSTALL, it tries to connect through my modem. Is
there a way to configure the tnsnames.ora so it doesn't try to
go through a network?
Sincerely
rk

You probably have to navigate to inside the INSTALL folder. Sometimes the SETUP.EXEs on the root of the CD won't launch. Should be something like INSTALL\WIN32\setup.exe

Install SAPgui 710 on Windows 2000 SP4

Hi,
I try to install SAPgui 710 on Windows 2000 SP4. But when i launch SetupAll.exe, window "SAPgui install master" does not appear.
Although, Install SAPgui 640 on Windows 2000 SP4 is success.

Hello Sergey
please be sure that the INTERNET EXPLORER 6 is installed on the W2k Clients!
If not, then the new NWSapsetup can not start!
Many of my messages in the OSS with same error description had under W2k the problem that the IE there was not in version 6.
If you can not solve this problem by yourself, please open a message in "OSS" under BC-FES-INS !
Best Regards
Sven

Trouble installing Distiller Server 8 alongside Acrobat Standard 8

After having installed Acrobat Standard 8 on a Windows XP machine (and updating to 8.1), I attempted to install Distiller Server 8 and received the following message: "Distiller Server is incompatible with the version of Acrobat installed on this computer. Please uninstall Acrobat to proceed with the installation of Distiller Server 8. Setup will now terminate."
I've called Adobe Technical Help and Adobe Customer Service, and they only direct me from one to the other resource. The info sheet for Distiller Server 8 states that this combination is supported, yet no one at Adobe appears to be familiar with either product.
I know that if I install Server first and then install Acrobat, it will cause issues with the Server functions - any suggestions?

Adobe doesn't support using different versions of Acrobat on the same Windows computer. You might be able to run Distiller Server on a virtualized Windows computer on the same hardware (but different OS) that is running Acrobat 9.

Help Installing Forms 11G on Windows 7 64 Bit

I am trying to install. I installed 64 bit Java JDK, Weblogic generic server, and finally Portal, Forms, Reports and Discoverer (11.1.1.2.0). When the Portal, Forms, Reports, and Discover install get to step 6 of 16, it reports: INST-07408: Unable to install or configure the product on a 32-bit JVM on a 64-bit machine. Note that the error seems to be a complaint against a JVM, not a JDK. Does anyone have a fix?
Edited by: user1637605 on Dec 20, 2009 7:13 PM
Edited by: user1637605 on Dec 21, 2009 3:45 AM

hi
Oracle Forms certified on Windows 7 and IE8
I've seen this question come up a number of times recently so just to make clear. Oracle Forms 11.1.1.2 (which is the first patch set to 11g) is certified to run again Window7/IE8 browser clients.
Full details of Forms client certification can be found here:
Link
sarah

Trouble Installing SQLServer Express on Windows 2008

I am trying to install Sql Server Express 2008 and I've been having trouble doing this simple procedure. My problem started because I need to install Sql Server Express 2008 on drive D of my Windows 2008 Server. I just modified the path displayed
to the D: drive (as opposed to C:). The rest of the path was untouched. So it created this string: "D:\Program Files (x86)\Microsoft SQL Server\" (omit the "" quotes). Unfortunately, it did not go as planned.
The setup generated an error: "The INSTALLSHAREDDIR command line value was not specified. This value must be specified when the INSTALLSHAREDWOWDIR command line value is specified ". So this simple task was starting to get unnecessarily
complicated. I then specified the command line: "SQLEXPRWT_x64_ENU /INSTALLSHAREDDIR="D:\Program Files (x86)\Microsoft SQL Server\". This produced another error: "The timestamp marker on log files has not been set. The
timestamp must be set prior to it being used for the first time.". Wow! I'm stunned and perplexed as to the reason why I need to be made aware of this, or anybody. Regardless, I proceeded to create a command line: "SQLEXPRWT_x64_ENU
/INSTALLSHAREDDIR="D:\Program Files (x86)\Microsoft SQL Server\" /TIMESTAMP=”20140507_120600”. Again, this generated an error pertaining to the timestamp. How can I resolve this?

Hi sreyes,
According to your description, indeed, this error will occurs if you select an install direction different from the default one (C:\Program Files\Microsoft SQL Server). I recommend you use the default path as shared feature directory. Or you can use the
following ways to install SQL server 2008 on another drive (D:\Microsoft SQL Server\).
1.Run the setup, select all the features you want to install. DO NOT change the install folder, press next;
2.When you see the screen displaying the configuration summary, check the config.ini path, then copy/paste the file on another drive/folder;
3.Edit this file to set correct values for INSTALLSHAREDDIR & INSTALLSHAREDWOWDIR (you can set D:\Microsoft SQL Server and D:\Microsoft SQL Server (x86)).
4.Run setup from the command line : SQLEXPRWT_x64_ENU.exe /q /action=Install /configurationfile=<Path to your custom .ini>
For more information, see:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/789acf70-2ca7-4338-9c65-e143d223a806/error-on-install-the-instancesharedwowdir-command-line-value-was-not-specified?forum=sqlsetupandupgrade
http://njbblog.blogspot.com/2011/05/error-microsoft-sql-server-shared.html
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Trouble installing shared printer on windows 7 64 bit

hey guys
i recently got a IBM thinkpad with Windows 7 Professional 64 bit.
we have a HP Laserjet 3015 thats shared on windows xp profesional computer. i am having trouble installing it on my comuter. if i connect the printer to my computer via USB, windows finds the drivers and it works.
The problem is when ever i try and insatll it over the network it does not work. i can search and find which computer it is attached to and see it in the shared printer list, but when i ever i try to connect to it says connecting>>searching windows update>>cant find drivers. it gives me the option of searching for the drivers to install. i have downloaded the drivers thats on the HP site but they dont help. when ever i select them in the manual it comes with an error saying driver not found then gives u the option of installing it your self. when u select the driver it says windows can not locate a suitable driver.
how can i get around this ??
This question was solved.
View Solution.

rory2g wrote:
i recently got a IBM thinkpad with Windows 7 Professional 64 bit.
we have a HP Laserjet 3015 thats shared on windows xp profesional computer. i am having trouble installing it on my comuter. if i connect the printer to my computer via USB, windows finds the drivers and it works.
The problem is when ever i try and insatll it over the network it does not work. i can search and find which computer it is attached to and see it in the shared printer list, but when i ever i try to connect to it says connecting>>searching windows update>>cant find drivers. it gives me the option of searching for the drivers to install. i have downloaded the drivers thats on the HP site but they dont help. when ever i select them in the manual it comes with an error saying driver not found then gives u the option of installing it your self. when u select the driver it says windows can not locate a suitable driver.
Try the following: On the Windows 7 computer go to the Devices and Printers folder, Add a Printer, Local Printer, Create a new port, Local port, Next, \\xpcomputername\lj3015 (where you put in the actual share name of the computer and printer), OK, Windows Update (and wait for the list to repopulate), HP Laserjet 3015 PCL5, Next, Next.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Installing oracle 10g on windows 2000 server

hi masters,
this might look very silly question, and every child might know answer, but i would like to ask this question here that
i have oracle 9i release 2 installed on my windows server 2000 and an application is already running, now i want to install oracle 10g on same machine...
but when i try to launch oracle universal installer, it fails to launch it....whay is this so??? do i need to adjust some parameters to install it????
can anyone provide a checklist to check??i have an antivirus installed on machine...
any suggestion will be appreciable
thanks and regards
VD

got my answer, you can follow this step.
on windows 2000 server while launching oracle universal installer, due to jre bug (noted in metalink 266617.1 doc and 393070.1) installer CMD prompt launch and disapper in a while... so run following command on command prompt
to resolve the issue.. change directory path according to your directory structure.
change directory to your oracle installation setup.exe directory and execute following command
C:\>\backup\SoftwareBackup\Database10g\database\install\oui.exe -J-Dsun.java2d.noddraw=truethanks and regards
VD
Edited by: vikrant dixit on Apr 21, 2009 4:47 AM
Edited by: vikrant dixit on Apr 21, 2009 4:48 AM
Edited by: vikrant dixit on Apr 21, 2009 4:50 AM

Install Oracle 10g on Windows 2000 server

hello
I have installed Oracle 10.1.0.2 on my server ( Windows 2000 server). The procedure of installation goes suitably but during the creation of the base it posts me:
instance Created
Dim-00019: Error of creation of service
O/S-error OS1387) Impossible to add or remove a member of the local group because this member does not exist
then, I look that the service OracleDBConsole of Enterprise Manager is not created
knowing only SqlPlus goes well.
after the installation, I want to add the console Enterprise Manager while using EMCA then it display this error:
Failure of the configuration Enterprise Manager because: Job_queue_processes must be equal to or higher than 1
help Me PLEASE

First problem: Check the user , which does the installation,
it must be a Local Administrator in order to install Oracle products on a
Windows NT/2000 Server (machine not part of a domain) or it must be a Domain Administrator to install Oracle products on a Domain Controller (PDC or BDC) (machine part of a domain).
Another known issue for this problem is a non-english Windows version,in this case the software should reloaded from OTN, which has a fix.
Second problem: You cannot run emca, BEFORE you have a running database, DBConsole depends on it.
Werner

SOS I am in trouble Installing Forms Server on Windows 2000 Server

Similar Messages

Maybe you are looking for