SOS! MEMORY PROBLEM AFTER NET USAGE!

Hi all, I'm using Nokia 5233 purchased in November 2010. Recently i have also updated the phone software to latest version 40.0.1. My problem is as follows: I use the net very frequently sites like facebook, gmail, yahoo chat, rediffmail and google. Before i use the net i check memory available, after using the net when i check again, a few mb space is taken up.
To check this i downloaded NETQIN mobile guard from OVI store, after checking i found that there is a file named WebpageIcons.db in the directory path C:/Private/10008d39, this file keeps increasing each time i use the net. Its eating up my valuable memory space. I contacted Nokia care, they said its a necessary file,but i want to know why it keeps eating into memory space. Also is there any way to clear out the space used by the file. I have tried emptying the cache and all privacy details, but nothing changed.today morning it was 7.8 mb and now as i'm typing i saw it has become 8.1 mb.
PLEASE CAN ANYONE HELP ME SOLVE THIS PROBLEM.

open browser select options clear privacy data and clear history and cache
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Similar Messages

Z68A-GD65 (G3) Memory problems after BIOS update

Good day, i'm russian, so sorry for my english.
Friend of mine had MSi Z68A-GD65 (G3), i5-2500K, memory pair 2*2GB with bios 22.8 (latest version with no red letters about ME8 and IvyBridge).
He decided to upgrade the processor to IvyBrydge and updated bios with new ME8. Then the computer went into a state of continue restarting every 3 seconds. After replacing the CPU to the new Ivy - computer works good, the impression is that the computer does not understand Sandy now and switched toIvy. But it has seen only one of memory pair. My friend just bought a new motherboard. Now he has no problems. I took his MB and SandyBridge CPU.
Flashing the bios to the old version by M-Flash - it does not see the BIOS file, although it is there (in the root, FAT, 2G). Flashed it under dos with AFUDE238 with a key -x, it said about mismatched ROM ID. After the old BIOS flashing (with an Ivy) computer went three-second reset mode. CPU changed to Sandy i5-2500K - now works good. By the way, now M-Flash see the firmware on a flash drive - I flashed it again from the M-Flash, just in case, reset the settings.
What is the problem: if I set the memory into the slot 3 or 4, the computer goes into a three-second reboot, it does not matter is the memory in the first two slots or no. If this memory is inserted in the first two slots - all ok. So I work now - in the first two slots with no dual-channel mode.
The feeling is that the problem appeared after first flashing to Ivy and remained after flashing back to Sandy.
Question 1: What to do to get working the memory slots?
Question 2: Is BIOS 22.8 - the latest which I will have with Sandy? (There is a problem now when the computer starts - 1 times out of 10 will not boot - reset is helping, and the BIOS at starting not very fast).
There are posts about people with the same MB and the CPU and the new BIOS (25.2) that supports Ivy. I'm confused. It means I can use the new firmware from SandyBridge. But there are many posts about problems with new firmware. Where is the true?
Just checked BIOS version - P.1 (25.1) 2012-04-16 - by the way with Ivy support. But I flashed with 22.8, I'm sure. ME version in BIOS isn't shown, but while booting - ME 7.0
What does it mean? Can it be repaired? What should I do?

Thanks to all. My system is working fine now.
What it was. I flashed BIOS with tool from this forum. Bios flashed good, but problem still was here. Then I flashed to the first bios version from support site. And again flashed ok but memory still not working in slots 3 and 4. Then I decided to flash back to last flash with Sandy support 22.8 (or 23.8). Then I flashed to the last bios at all - 25.4. Flashed it from dos - this was pretty long. It rebooted 3 times (ME updated too). I still don't know - what it was with first flashing to Ivy. Now it's ok.
So I decided the problem is bent pin. With magniglass and needle I've found some uncertain pins (these were not BENT, but slightly bent) and touched these with my needle. And that was the answer. Now all works fine. Thank you all.
On the russian msi forum no one answered and helped me at all.

N97 Memory Problem after Firmware Update

Hi all,
im having trouble with my N97.
i recently updated the software using the nokia software updater....
now, when the phone turns on it comes up " not enough memory to perform the operation "
then after it says " memory full, delete or move some data from C: Phone memory. "
before i get chance to do this the phone crashes and goes through the same process.
ive tried deleting and moving files when the phone is just plugged into my laptop.
but it persists in restarting after like 30 seconds of being switched on...
any suggestions ?
thanks

make sure you have a back up of your device which you s hould have anyway since you just did update and reformat your phone
*#7370# the default code is 12345 and then try the things listed below as well
/discussions/board/message?board.id=topfaq&thread.id=159
try this and also when you install y brower or similar go to c drive
system and delete drmg and cache folders. no worries they self replicate.
Message Edited by radical24 on 15-Dec-2009 03:37 PM
Message Edited by radical24 on 15-Dec-2009 03:38 PM
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Hello, I have a problem on FCP 7 message (error: memory saturates) after (command R) for rendering, cordially

Hello, I have a problem on FCP 7 message (error: memory saturates) after (command + R) for rendering, cordially

Do you use still images in your edit? Make sure all your images are RGB (not CMYK etc).
Hope it helps
Andy

After preforming windows memory tool, message says memory problem contact manufacturer

Hp Pavilion dv6 1030us windows vista, After preforming Windows memory diagnostic tool, message upon start -up is, " Your Computer has a memory problem Contact your manufacturer to indentify and repair the problem."

Hi,
Shutdown the notebook. Tap away at f10 as you start the notebook to enter the bios menu. Under the Advanced or Diagnostic tab you should find the facility to run a tests on the Memory. Post back with the details of any error messages.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Dual Channel memory problems on Neo 875P

I am having considerable trouble getting the NEO 875P to work with dual channel DDR400 DIMMs. I have two Kingston KVR400X64C25 DDR400 256MB memory modules, each of which works correctly by itself. However, once I move one
of the modules to channel B, I cannot boot my operating system (currently Windows XP.) The problem also occurs in Windows 2000, which I also have on the system. I receive blue screen errors that indicate paging/memory problems. I have upgraded my BIOS to the latest version (1.3)* in the hope that it would solve my problems, but it has not. The POST screen detects that there is 512MB of memory working in Dual Channel mode, but even when it does get through the O/S booting process (rarely), it crashes within minutes. Putting just one of the chips in makes the system perfectly stable. If anyone has any information, please let me know!
Thanks,
Jim Keller
http://www.centerfuse.net
* My board was dead after trying to flash the 1.3 BIOS, but after about 10 attempts of using CTRL+HOME method to recover the BIOS, it finally worked with version 1.0. I then re-flashed with 1.3, and it rebooted fine. Are there any updates about all of the problems with v1.3 ?

>I can only answer based on what I've read on this forum
I figured as much, I was just wondering if you knew whether MSI themselves frequents the forums or answers emails sufficiently.
I've had an interesting development though. I stumbled upon Tom's Hardware Guide's article about 875P motherboards at http://www17.tomshardware.com/motherboard/20030519/i875p-01.html
They mentioned that they needed to increase the memory voltage from 2.5 to 2.6 in the BIOS to get some memory modules to work. I did this, and for the first time, I am running in Dual channel DDR mode. However, the article also mentions that "the system does not run completely stably", so I guess I'll have to wait and see if it crashes again. However, I'm far enough beyond the XP splash screen to post this message, so I guess we're getting somewhere!
-Jim Keller
http://www.centerfuse.net

Computer problems after upgrading to Mavericks

SO many problems. I cleared out a ton of old stuff that I saw might be causing problems, and I've verified and repaired the disc, and uninstalled and reinstalled a couple of programs that I was seeing problems with in the console, but now I'm just flummoxed. It's behaving better than it was earlier, and isn't giving me the beach ball nearly so often, but it still seems like it's taking too long for a lot of things. I just reinstalled Avast and am currently letting a game update through Steam. I have the console and the activity monitor open to one side. Since I opened the console, it's been spitting out one or two messages every second, and all I can find through some internet searching is that it's something to do with the wireless connection. There's some other stuff periodically mixed in that doesn't sound good either, involving either sandboxd or mdworker. But for the most part it's along these lines:
Nov 5 00:59:52 kate-lenthalls-macbook-pro kernel[0]: 1516.810543: vap-0: connection_sm_roam_check_timer_handler: roam check cur rssi 22 rssi thresh 23 policy 3 last_scan_rssi 23 rssi_change_thresh 7 ignore_thresholds 0
Nov 5 00:59:53 kate-lenthalls-macbook-pro kernel[0]: 1517.811065: vap-0: connection_sm_roam_check_timer_handler: roam check cur rssi 22 rssi thresh 23 policy 3 last_scan_rssi 23 rssi_change_thresh 7 ignore_thresholds 0
Nov 5 00:59:54 kate-lenthalls-macbook-pro kernel[0]: 1518.811534: vap-0: connection_sm_roam_check_timer_handler: roam check cur rssi 22 rssi thresh 23 policy 3 last_scan_rssi 23 rssi_change_thresh 7 ignore_thresholds 0
Nov 5 00:59:55 kate-lenthalls-macbook-pro kernel[0]: 1519.811686: vap-0: connection_sm_roam_check_timer_handler: roam check cur rssi 22 rssi thresh 23 policy 3 last_scan_rssi 23 rssi_change_thresh 7 ignore_thresholds 0
Nov 5 00:59:56 kate-lenthalls-macbook-pro kernel[0]: 1520.812774: vap-0: connection_sm_roam_check_timer_handler: roam check cur rssi 23 rssi thresh 23 policy 3 last_scan_rssi 23 rssi_change_thresh 7 ignore_thresholds 0
Nov 5 00:59:58 kate-lenthalls-macbook-pro kernel[0]: com.avast.AvastFileShield Warning: Unable to retrieve file path. Skipping. [22]
Nov 5 01:00:27 --- last message repeated 208 times ---
Here's my report from EtreCheck:
Hardware Information:
          MacBook Pro (17-inch 2.4GHZ)
          MacBook Pro - model: MacBookPro3,1
          1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
          4 GB RAM
Video Information:
          GeForce 8600M GT     - VRAM: 256 MB
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0
          AirPlay: Version: 1.9
          AppleAVBAudio: Version: 2.0.0
          iSightAudio: Version: 7.7.3
System Software:
          OS X 10.9 (13A603) - Uptime: 0 days 0:30:19
Disk Information:
          ST9500420AS disk0 : (500.11 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) /: 413.49 GB (122.62 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
                    BOOTCAMP (disk0s4) /Volumes/BOOTCAMP: 85.76 GB (28.21 GB free)
USB Information:
          Apple Inc. Bluetooth USB Host Controller
          Apple Inc. Built-in iSight
          Apple Computer Apple Internal Keyboard / Trackpad
          Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
          com.eltima.ElmediaPlayer.kext          (1.58)
          com.bresink.driver.BRESINKx86Monitoring          (8.0)
          com.avast.PacketForwarder          (1.3)
          com.avast.AvastFileShield          (2.0.0)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist
          [loaded] com.eltima.ElmediaPlayer.daemon.plist
          [failed] com.google.GoogleML.plist
          [loaded] net.sourceforge.MonolingualHelper.plist
Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist
          [loaded] com.adobe.CS5ServiceManager.plist
          [loaded] com.wacom.pentablet.plist
User Launch Agents:
          [not loaded] com.avast.home.userinit.plist
          [loaded] com.google.keystone.agent.plist
          [loaded] com.markdouma.SourceFinaglerAgent.Portal.plist
          [loaded] com.valvesoftware.steamclean.plist
          [not loaded] org.virtualbox.vboxwebsrv.plist
User Login Items:
          Flux
          smcFanControl
          GrowlHelperApp
          Google Notifier
          FreeMemory
          TrashMeHelper
          Cloud
          sidenote
          Temperature Monitor
          avast!
          Dropbox
          Alfred 2
          Activity Monitor
3rd Party Preference Panes:
          avast! Preferences
          PenTablet
          Flash Player
          GeekTool
          Growl
          MultiBrowser
          Shades Preferences
Internet Plug-ins:
          Default Browser.plugin
          DirectorShockwave.plugin
          DivX Web Player.plugin
          Flash Player.plugin
          FlashPlayer-10.6.plugin
          JavaAppletPlugin.plugin
          QuickTime Plugin.plugin
          Silverlight.plugin
          Unity Web Player.plugin
          WacomNetscape.plugin
          WacomTabletPlugin.plugin
User Internet Plug-ins:
          Picasa.plugin
Bad Fonts:
          None
Time Machine:
          Skip System Files: YES
          Auto backup: NO
          Time Machine not configured!
Top Processes by CPU:
              24%          Console
              10%          WindowServer
               9%          LotroLauncher
               2%          steam
               1%          EtreCheck
               1%          mds_stores
               1%          mds
               1%          com.avast.proxy
               1%          Activity Monitor
               0%          empdaemon
Top Processes by Memory:
          180 MB             steam
          156 MB             Safari
          152 MB             LotroLauncher
          150 MB             mdworker
          147 MB             mds_stores
          139 MB             com.apple.IconServicesAgent
          70 MB              Dropbox
          70 MB              Console
          66 MB              com.apple.WebKit.WebContent
          61 MB              Finder
Virtual Memory Statistics:
          207 MB             Free RAM
          1.81 GB            Active RAM
          1.46 GB            Inactive RAM
          513 MB             Wired RAM
          2.39 GB            Page-ins
          3 MB               Page-outs

I just reinstalled Avast
"Avast" is perhaps the worst of the whole wretched lot of commercial "security" products for the Mac. It's worse than the imaginary "viruses" you were worried about when you installed it. Not only does it fail to protect you, it throws false warnings, destabilizes and slows down your computer, and sometimes or always corrupts the network settings and the permissions of files in your home folder. Removing it may not repair all the damage, and neither will Disk Utility or even reinstalling OS X.
Back up all data, then remove "Avast" according to the developer's instructions. Reboot.
If you tried to remove Avast by dragging an application to the Trash, you'll have to reinstall it and follow the instructions linked above.
If you still have problems after following those instructions, post again.

Shared variable engine memory problem

Hello,
I have a lot of problems with DSC 8. The server that worked very well in DSC 7, in DSC 8 is creating a lot of problems starting with memory leaks in tagsrv process. I have over 5000 shared variables and when I publish them the tagsrv is around 90Mb of memory. After approx. 30 min is around 130Mb and so on until the computer becomes useless. If I restart the computer the process is the same, even if I don't start the VI that updates the shared variables. I tried to uncheck different things in the variables definition like: no alarming, no buffering, no scaling, with no improvement.
Is there a way to undeploy the shared variables or processes manually, not from the labview project, or Variable Manager. To undeploy the mentioned library with the Variable Manager takes more that an hour (just to enumerate all the shared variables).
Any suggestion is welcomed,
cosmin

cosmin,
I have several thoughts for you. First, I recommend
splitting up
your 5000 variable library into a set of smaller libraries. In
contrast
with the LabVIEW DSC 7 engine, the LabVIEW 8 Shared Variable Engine is
optimized for multiple smaller libraries. I would recommend
having at
most about 1000 variables per library. You'll see some different
recommendations from different people at NI, but in my personal
experience I
think 1000 is about as many Shared Variables that can be easily managed
at
once. For your case this would mean having 1000 variables in 5
different
libraries. --Splitting up your library gives you the added
benefit of being able to
undeploy/disable individual libraries without affecting the other
libraries. Unfortunately, the SCF migration tool will not do this
for you manually so it may take a little time to get everything
organized.
Your comment about ever-increasing memory usage is
concerning. Do
you see this while deploying your library, or while writing
values? If
you write to values very fast (like in an untimed loop) for an extended
period
of time memory usage will increase as the variable buffers
increase.
Please elaborate more on this topic and let me know what happens if you
separate your variables into multiple libraries. I was not able
to reproduce this on a similarly spec'd computer using 10 libraries of
500 variables each.
You can programmatically undeploy libraries using the delete process VI
on the DSC Engine Control palette in LabVIEW. Use this VI in combination
with the get process list VI to quickly remove all currently deployed
libraries.
Also, regarding your question about why variables sometimes show up the
Published Variable Monitor window; the different utilities you described may
use different methods to get that variable list. These methods behave
differently depending on how stressed the Shared Variable Engine is. If
you're in the middle of loading a library with 5000 variables I'm not surprised
that the list won't get populated immediately in the Published Variable Monitor
window. After the library successfully loads though, you should be able
to refresh the view and see all the variables.
Regards,
Nick F
LabVIEW R&D
~~

ODBC Linux Memory Problem

Hi,
I seem to have a big problem with an application I've made.
The application connects to a Oracle Database, fills the database with arround 1GB of information. Once the database is filled my application launches a series of queries to test performance.
My problem is when working with Oracle 11 in Linux (Fedora and Oracle Enterprise Linux). Apparently I can't seem to get past the database filling process. The free memory vanishes quite fast, eaten up between my application proces' and Oracle's. Now, I know the problem is not with my application because the same code works perfectly in the following databases:
Windows:
- Oracle 10R2
- Oracle 11g
- PostgreSQL 8.3
- MySQL 5.1
- MySQL 6-alpha
- SQL Server 2005 Express Edition
Linux:
- PostgreSQL 8.3
- MySQL 5.1
- MySQL 6-alpha
My application actually connects to the database and starts executing the inserts successfully. It's just that at some point the memory gets filled up, pretty quickly actually. I've watched the through vmstat. The first one to fall is the free memory, then follows the cache memory. And then it starts filling up swap. When it reaches to 2GB of used swap the behavior differs with the Linux Distribution: Fedora Core 8 crashes horribly, in Oracle Enterprise Linux at some point my application's process goes to "sleep" and I seem to still be able to do other things.
To connect to the database I use the [OTLv4 library|otl.sourceforge.net]. One might think that my problem is with OTL, but I use the same OTL in all those cases, and unless it's an issue between Oracle in Linux and OTL I don't think it's an OTL issue.
Can anyone push me in some direction ?
Thanks.

Well, you seem to have a memory leak in your application, assuming nothing else is running. Check out the top(1) program; you can get it to sort the displayed processes according to how much %MEM (percent of memory) they are using. First entry is the culprit.
The best way I've found to locate a memory leak is to run your program using valgrind(1). This tool runs your application in a virtual CPU built in to valgrind(1). It can detect tons of different memory usage issues, from using an un-initialized variable to leaked memory.
Of course, you may not have a memory problem. Does you program generate huge bursts of I/O or is the I/O more evenly paced? Kernel I/O backlog can consume memory quickly. While your application is running, open two more windows. In one, run the command:
$ watch -n3 -d cat /proc/meminfo
and in the other:
$ watch -n3 -d cat /proc/slabinfo
Try to figure out what memory usage is steadily increasing; that can tell us if the app is leaking or the I/O channels just can't keep up.
Hope this gives you some ideas about how to proceed.

Flex or AIR application is slowed down after continuous usage.

Hello,
I am facing two issues one each in Flex application and AIR application.
1. First in Flex application.
I have developed an Flex application in Flex 4.0 and is being used by around 10 to 15 users simultaneously.
Now the problem is that when all the users start use of the application in the morning, it is running perfectly. But after usage of 3 or 4 hours, or let's say after lunch its speed is gettling slow. And due to low speed, application behaves abnormally. For example, I am calling multiple php files one by one through http service in one of the screens. And those php calls are dependent on each other. So due to low speed step 2 php call is over before the step 1 php call. And due to that application can't set the screen as per its normal behaviout.
And this problem stays even after user clears the browser cache.
So I am assuming that even after clearing browser cache flash player is not removing all the cache or something is still there on the server which is causing slow speed of the application. Because when next day users come to office and use the application they don't face such issues. Such issues are coming only after continuous usage of it.
So please help me in solving this issue ASAP. Because our client is getting angry over this issue.
2. AIR Application issue
I have developed an AIR application which is using socket connection to use different designer softwares like In Design, Illustrator etc.
Now sometimes happens that due to low speed of machine or internet my socket connection didn't get time to connect to some design softwares. So I have put a code that checks if the connection is lost then it reconnects it. But this connection lost problem starts coming after heavy usage of the application.
And the second problem is regarding drag and drop. When I do continuous drag and drop of images of around 70 to 80 images, I get memory over error from the machine stating that please close the application as there is no memory available now.
So please suggest a solution for this ASAP as our client will need to do lots of drag and drop operations and lots of socket connection to design software during the day.
Thanks & Regards,
Jigar Oza

Here is the screen shot of my AIR application.
When I do continuous drag and drop operation the highlighted VO or object instances are increased. These instances are increased and my system memory is used because of that. So how can I remove the instances of those objects which are used repeatedly?

A possible solution to FCP X memory problems - it is working for me so far

I think I may have found a way to prevent FCP from gobbling up all available memory (and bring my mac to its knees).
The idea came to me from a post by Tony Reidsma in this thread: https://discussions.apple.com/thread/3770230?start=0&tstart=0
He pointed to this page regarding memory usage in FCP X and Motion: http://bradbell.tv/filmmaking/improving-ram-performance-in-final-cut-pro-x/
The above page,mentions a preference setting that exists in Motion but "not in FCP X" - the setting for a "cache percentage".
This is supposed to determine how much of the available memory Motion should retain for caching content (or so I gather).
Sure enough, this preference is not there visibly in FCP X, but since FCP X and Motion share a common foundation, I thought it might be there anyway.
So after looking into the plist files in XCode, I found the name of this preference setting and used the defaults command in Terminal.
I have been throwing everything at it for a day now and it seems to be working well, so I thought I'd share.
Here is the relevant defaults command (NOTE: use this in Terminal when FCP X is NOT running):
defaults write com.apple.FinalCut OZPreferenceManager::CachePercentage -int 20
(this seems leave free about 20% of the ram available when FCP X starts; I have experimented with different values, and apparently the higher the number, the more free memory is untouched)
I have 15 applications running in MacBook Pro (with 8GB Ram), for hours, and no memory problems (and no need to "purge"). And FCP X and all other applications have not shown any of the slowdowns typical of low memory situations.
NOTE: While I have not experienced any negative effects, I have no internal knowledge of the software and no guarantee that this is effective or harmless.
One can revert the above setting by typing (or pasting) the following in Terminal (again, with FCP X NOT running):
defaults delete com.apple.FinalCut OZPreferenceManager::CachePercentage
If any of you try this and it does or does not work for you, I'd appreciate if you post your results back here.

Hey Luis, and everyone else.
I just tried your terminal script, and it has completely cured the sluggish problem with FCPX. Thank you, thank you , thank you!!.
I am working in a pretty large project, and now is flowing like a champ. Even skimmin is on point.
The project is 60 GB in size and I didnt create optimized media or used Proxy, so is working out of the RAW data, and boy must I say is flowing.
Again thank you dude.
PS: to you all out there, if you jump in a large project, I found that by making compund clip over compound clip helps the speed of the whole project. Example: I am braking down scenes in to compound clips, and portions of the scenes in to more compund clips, that has created a fast flow to go in an out of.
Macbook Pro 13 2009,
8GB ram / 750GB HDD
FCPX 10.0.0

Memory Problem with SEt and GET parameter

hi,
I m doing exits. I have one exit for importing and another one for changing parameter.
SET PARAMETER exit code is ....
*data:v_nba like eban-bsart,
       v_nbc like eban-bsart,
       v_nbo like eban-bsart.
       v_nbc = 'CAPX'.
       v_nbo = 'OPEX'.
       v_nba = 'OVH'.
if im_data_new-werks is initial.
if im_data_new-knttp is initial.
    if im_data_new-bsart = 'NBC' or im_data_new-bsart = 'SERC' or im_data_new-bsart = 'SERI'
       or im_data_new-bsart = 'SER' or im_data_new-bsart = 'SERM' or im_data_new-bsart = 'NBI'.
      set parameter id 'ZC1' field v_nbc.
    elseif im_data_new-bsart = 'NBO' or im_data_new-bsart = 'NBM' or im_data_new-bsart = 'SERO'.
      set parameter id 'ZC2' field v_nbo.
    elseif im_data_new-bsart = 'NBA' or im_data_new-bsart = 'SERA'.
      set parameter id 'ZC3' field v_nba.
    endif.
endif.
endif. *
and GET PARAMETER CODE IS....
get parameter id 'ZC1' field c_fmderive-fund.
get parameter id 'ZC2' field c_fmderive-fund.
get parameter id 'ZC3' field c_fmderive-fund.
FREE MEMORY ID 'ZC1'.
FREE MEMORY ID 'ZC2'.
   FREE MEMORY ID 'ZC3'.
In this code i m facing memory problem.
It is not refreshing the memory every time.
So plz give me proper solution.
Its urgent.
Thanks
Ranveer

Hi,
   I suppose you are trying to store some particular value in memory in one program and then retieve it in another.
If so try using EXPORT data TO MEMORY ID 'ZC1'. and IMPORT data FROM MEMORY ID 'ZC1'.
To use SET PARAMETER/GET PARAMETER the specified parameter name should be in table TPARA. Which I don't think is there in your case.
Sample Code :
Data declarations for the function codes to be transferred
DATA : v_first TYPE syucomm,
       v_second TYPE syucomm.
CONSTANTS : c_memid TYPE char10 VALUE 'ZCCBPR1'.
Move the function codes to the program varaibles
v_first = gv_bdt_fcode.
v_second = sy-ucomm.
Export the function codes to Memory ID
EXPORT v_first
       v_second TO MEMORY ID c_memid.        "ZCCBPR1 --- Here you are sending the values to memory
Then retrieve it.
Retrieve the function codes from the Memory ID
IMPORT v_first TO v_fcode_1
         v_second TO v_fcode_2
FROM MEMORY ID c_memid.                                   "ZCCBPR1
FREE MEMORY ID c_memid.                                   "ZCCBPR1
After reading the values from memory ID free them your problem should be solved.
Thanks
Barada
Edited by: Baradakanta Swain on May 27, 2008 10:20 AM

Memory Problems with Adobe PDF iFilter for 64-bit

In preparation to rebuild my Windows Search Index, I installed the Adobe PDF iFilter for 64-bit on my system (Vista Business 64). When I finally rebuilt the index, I wasn't too surprised by what I saw happen, namely, the SearchFilter.exe process would kick in whenever I wasn't using the system and just eat RAM. One time I turned it on and it had allocated over 4,000 MB (and my system only has 4,030 MB available) so of course it was forcing all the other processes to hard fault (ie. everything was moving like molasses--for example, it took 20 minutes to put the thing to sleep). But I just let it do it's work, figuring that perhaps this was to be expected relative to the small library of PDF's that I've accumulated on my computer, ranging from LaTeX generated text files, to containers for hi-res scans. So, after a day and a half of basically not using my laptop, everything finally calmed down and I enjoyed the benefits of searching the content of my library from the Windows Start menu--for a short while.
However, to my dismay I've encountered the problem that this freezing of my computer would now occur after everytime I download a new PDF (in this particular case they were Google Books scans) and then left the computer to idle. Again, the SearchFilter.exe would allocate all of my RAM for itself and just push everything else onto the Virtual RAM, which means the SLOWEST possibly fetching you can get. I had to uninstall as this was making my computer unusable for 15-30 minutes after each idle. Everything is back in working order without the iFilter, but I would like to know if anyone has reported such problems on x64 systems. Obviously, I will also report the problem to Microsoft, since the search engine should certainly have the precaution to handle such memory problems.   However, it is a problem that is created by the Adobe PDF iFilter interacting with the Windows Search engine.

Hello,
We believe we have figured this out. It looks like it has to do with the length of the default folder location for the Adobe iFilter.
I was able to reproduce the issue and the following resolved it for me. See if this resolves it for you all as well.
Here is how to get Adobe Version 11 PDF filter to work.
1 . If you haven’t already, run the following in SQL Server:
Sp_fulltext_service ‘Load_os_resources’, 1
Go
--you might also need to run:
sp_fulltext_service ‘Verify_signature’,0 --This is used to validate trusted iFilters. 0 disables it. So use with caution.
--go
2. Stop SQL Server. (Make sure FDHost.exe stops)
3.
Uninstall the Adobe ifilter (because it defaulted to having spaces or the folder name is too long).
4.
Reinstall the Adobe iFilter and when it prompts for where to install it, change it to: C:\Program Files\Adobe\PDFiFilter
5.  Once the installation finishes, go the computer’s Environment variables. Add the following to the PATH.
C:\Program Files\Adobe\PDFiFilter\BIN
NOTE: it must include the BIN folder
NOTE: If you had the OLD location that included spaces, remove it from the path environment variable.
6. Start SQL Server
7.  IF you had an existing Full-text index on PDFs, drop the full-text index and recreate it.
8. You should now get results when you run sys.dm_fts_index_keywords('db','tblname') --Note: Change db to be the actual database name and tblname to be the actual table name.
Give this a try and see if this fixes yours.
Sincerely,
Rob Beene, MSFT

Memory problems with PreparedStatements

Driver: 9.0.1 JDBC Thin
I am having memory problems using "PreparedStatement" via jdbc.
After profiling our application, we found that a large number oracle.jdbc.ttc7.TTCItem objects were being created, but not released, even though we were "closing" the ResultSets of a prepared statements.
Tracing through the application, it appears that most of these TTCItem objects are created when the statement is executed (not when prepared), therefore I would have assumed that they would be released when the ResultSet is close, but this does not seem to be the case.
We tend to have a large number of PreparedStatement objects in use (over 100, most with closed ResultSets) and find that our application is using huge amounts of memory when compared to using the same code, but closing the PreparedStatement at the same time as closing the ResultSet.
Has anyone else found similar problems? If so, does anyone have a work-around or know if this is something that Oracle is looking at fixing?
Thanks
Bruce Crosgrove

From your mail, it is not very clear:
a) whether your session is an HTTPSession or an application defined
session.
b) What is meant by saying: JSP/Servlet is growing.
However, some pointers:
a) Are there any timeouts associated with session.
b) Try to profile your code to see what is causing the memory leak.
c) Are there references to stale data in your application code.
Marilla Bax wrote:
hi,
we have some memory - problems with the WebLogic Application Server
4.5.1 on Sun Solaris
In our Customer Projects we are working with EJB's. for each customer
transaction we create a session to the weblogic application server.
now there are some urgent problems with the java process on the server.
for each session there were allocated 200 - 500 kb memory, within a day
the JSP process on our server is growing for each session and don't
reallocate the reserved memory for the old session. as a work around we
now restart the server every night.
How can we solve this problem ?? Is it a problem with the operating
system or the application server or the EJB's ?? Do you have problems
like this before ?
greetings from germany,

Nokia C5-03 Low memory problems ( Other Files )

Please help. I have a nokia C5-03 the handset is showing phone memory is full. I have checked and uninstalled all unecessay applications. But problem is still there. when i check the phone memory it indicates that i have other files of 42mb installed and using phone memory. however i am unable to check what other files are installed or classfied as other files. Can you please assist me so i can know what these other files consist of or where they are located.

Hi Thetao,
I typed a more extensive reaction before, but it got lost when I pressed "post". Therefore I just respond to the main points that you mentioned (and some I found out myself).
Strange: I can't find the 40 MB Maximum User Storage on the Nokia website anymore (nor the 75 MB). But it sounds very familiar to me. It looks to me as if they removed this from the phone specs, also of other Smartphones by the way.
Yesterday, I deleted some small apps that I don't use (anymore) such as InternetRadio and I also removed Nokia email. Although the apps were below 2 MB together, this freed up over 7 MB of Phone memory (24 MB free now)! I think there were still some old emails stored in C: which I couldn't delete any other way. This helped me a great deal already but I tried your suggestions as well.
1. No map data or CITIES folder on C: 2. Switched messages memory to phone (and phone to offline mode) and I did indeed find a forgotten email account with 30 email messages. Not much but I had 24,7 MB free after that. Of course, I put messages memory back to the memorycard. 3. Used the free edition of Y-Browser to manually delete the cache folder. Not much data in that, but 25,1 MB free after that. Nice tool, with which you can reach folders that normally stay hidden! Used YBrowser to search all C: for files over 300 kB. Only 2 files: boot_space.txt in C:\ (500 kB, contains only the X repeatedly as far as I see, but is probably essential for the operating system) and C:\resource\python25\pyton25.zip (1 MB). It looks like an installation package, but I'm not sure if I can delete it. By the way: YBrowser hasn't made a shortcut in one of the menus. Only way that I found to start it was to look for it using the Phone's search function. Is there a way to make this shortcut myself?
4. Yes I did. No Images folder on C: anymore, nor other big files (see point 3)
5. I use Bluetooth for file transfer sometimes, mainly for installation files (such as YBrowser.sis, but I did this one via USB-cable). However, no big files are left on C: so I don't think I have this problem.
6. I tried to delete Nokia Chat yesterday as well (with the other apps), but it won't be uninstalled the normal way as it says "Uninstall cancelled" (not sure about the exact translation since my phone 'speaks' Dutch) Do you know if there's another way to get rid of this 3 MB app that I don't use at all?
I think I may have found an explanation and a solution for the memory problem while navigating. You mentioned the "memory in use" in the map settings. Above that option there's a slide bar for the % of memory that the navigation can use. Standard is 70%. I always thought this was about storage memory on (in my case) the memorycard. Another topic mentioned that this the working memory (so the RAM) that the navigation may use. Setting it to 70% means there's only 30% left for other apps that run in the background. The other topic states that this is nog enough so the slider should be set to for instance 30% for navigation leaving 70% free for "the phone". From behind my computer, navigation seems much more stable. I'll try this setting in my car soon and let you know how it works.
Thanks a lot for thinking along with me so far! There's already 25,1 MB of space, which is great since it was only 7 MB last Sunday. And navigation looks more stable. I'd appreciate if you have some more answers to my latest questions, but if not I think my phone will work a lot better already!
Regards, Paul

SOS! MEMORY PROBLEM AFTER NET USAGE!

Similar Messages

Maybe you are looking for