SOS: module /TMWFLOW/CHECK_PRJ_CONS: No export system for productive client

HI, gurus:
when activating Change request manager in project, i met an error:
Message from function module /TMWFLOW/CHECK_PRJ_CONS: No export system for PRD-100
(PRD is productive system)
hwo to fix it?
hi, the problem has been fix, it is due to a incorrect transpoirt route.
Edited by: chrina on Jul 17, 2008 12:18 PM

Hi Imran,
Please check below blogs:
Change Request Management scenario: Usual questions and known errors
http://scn.sap.com/people/dolores. correa/blog/2009/07/22/change-request-management-scenario-usual-question s-and-known-errors
First steps to work with Change Request Management scenario
http://scn.sap.com/people/dolores. correa/blog/2008/07/26/first-steps-to-work-with-change-request-managemen t-scenario
Thanks
Vikram

Similar Messages

No Exporting System for system ECP-100 in project ZECC_QGM

Hi
we are using QGM Functionality in Solution Manager7.1 with SP08 for ECC Implementation project.
last week we migrated your Solution manager system to a different Hardware, where there is a change in IP address, Host name and SID was changed.
and we alos patched the system from SP08 to Sp10.
After the patching, i performed all the system preparation and basic configuration and managed system configuration was finished.
Configured STMS on Solution Manager and Linked the Both the Domain controllers(ECC and SOLMAN).Every thing was find up to now.
when i tried to do do consistency check on Project, through TX; SOLAR_PROJECT_ADMIN, i am getting the following error.
No changes were made on ECC -STMS.
i just recreated the STMS for SOLMAN after the migration.
Error message as follows:
No Exporting System for system ECP-100 in project ZECC_QGM
where ECP is my production system and ZECC_QGM is the project.
I didn't changed anything in terms of Logical components, all the 3 system are included in to Logical component and RFC- READ and TMW are fine.
could some shad some light on that ,is there any thing that needs to checked after the system copy of Managing system interns o this STMS>

Hi
This is known error and the issue got resolved by applying a SAP Note:1878718.
Kind Regards,
Phaneendra K

How to define an export system for a production system?

Hello:
I remember there is a way to define an export system for a PRD.
However I cannot recall exactly what to do: in transport profile or instance profile?
Could any expert help find out this?
Thanks with points!
Regards!

Hi,
Are you trying to configure CHARM? In that case, try setting the domain controller as the production system and keep CTC=1.
This should help.
Thanks,
Rinkal

SapUp: "Export DVD for product ERP"

Hi everybody.
I'm ugrading SR3 to EHP4 but i don't know what DVD number for Label: "Export DVD for product ERP"
Could you help me?
Thanks you.

Thanks for Reply.
I'm using SapUp to Upgrade my system from SR3 to EHP4.
When i used SapEHPI, it met error in step EHP_INCLUSION and i could not fix it!
<<detail error had describe in my message: SAPehpi error >>
Could you help me.
Thanks

Export DVD for product CRM/SOLMAN Upgrade Solution Manager 7.1

Hello Experts,
It is my first time doing an upgrade and I have a problem, the SOLMANUP tool gives me: "Enter at least the mount point containing "Export DVD for product CRM/SOLMAN"", I downloaded from SMP the 12 parts of the SAP Solution M. 7.1 Upgr.Export (51039400), I got now 1 .exe file and 11 .RAR files and when I put the path, the SOLMANUP doesnt recognize as a valid mount point, any advices?
Regards,
Paul

Hi Paul,
Have you already checked note 1577909?
Note: 1462137 - Add. info. about Upgrading to SAP Solution Manager 7.1
Please enter mount points for the DVDs required for the upgrade.
Enter at least the mount point containing "Export DVD for product
CRM/SOLMAN"
Please check if the requested Data Carrier is mounted on any of the mount points:
       Path                                     Description
      +                                        +             +
     1 /usr/sap/SMP/SOLMANUP/51042010
     2 /usr/sap/SMP/SOLMANUP/51040039
     3 /usr/sap/SMP/SOLMANUP/51040119
     4 /usr/sap/SMP/SOLMANUP/51040868_2/DVD_OS_
     5 /usr/sap/SMP/SOLMANUP/upgrade_export_dvd
     6 /usr/sap/SMP/SOLMANUP/upgrade_export_dvd
You will have to download all the archives and then extract them. Please go through the
SAP Note 886535 for these kind of archives. Once everything is archived
and extracted, provide the path.
Thanks
Regards
Vikram

Config for Production client

Dear all,
I'm a new basis and now I'm working in big project ERP. I have a disturbed about config for Production client.
In scc4 we must set client role is Production and No change allowed for Objects. But in production some time we need do Open and Close Period, or change following business requirement, ... This is not allowed to do in Production client.
How do we config for Production client to cover this requirements ?
Do we need a config client for maintain Production client ? Example: Production client is 500, Config client is 100. When we need Open or Close Period or change anything, we do in 100 and transfer request to 500.
Thank you very much.
Regards,
Thanh.
Do not use text message language, the next time your thread will be deleted.
Read the "Rules of Engagement"
Edited by: Juan Reyes on Dec 1, 2010 11:06 AM

You can customize transaction to be executable although the setting in SCC4 is "productive", this is accomplished by using transaction SOBJ:
Note 1497640 - Open and close periods in productive client
You can theoretically put every customizing view there and make it "executable" in a production system.
Markus

Profile for Production Client in production server.

Dear Tech Masters,
I have installed SAP ECC 6.0 (Production server). Now I want to create client ( First client after installation), which would be the production client. I am not sure about the profile for client copy from 000. After a lot googling ...I am confuse whether SAP_ALL or SAP_CUST which one I use for client copy from 000 for production client.
Please help me asap.
Edited by: RABI PAL on Jan 2, 2009 7:44 PM

go with SAP_ALL
you are using 000 client and ur going to create new client XXX for XXX client you try to use SAP_ALL then you can you DDIC with full authorizations for XXX Client.

How to determine the sender business system for ABAP client proxy

Hi All,
I have one doubt: when the client proxy sends the message to XI, how could i know what is the sender business system name for it?
Is it the logical system which is reflected in Technical System?
let's say if i have the ABAP system, the technical system is ECC, which has three clients: 001, 066 and 000.
And the client 001's logical system in ECCCLNT001 (all the client proxy is created in this client). In this case, the sender business system name is ECCCLNT001, am i right?
If no, please correct me.
Thanks in advance
Leo

Hi lawrence
When data is distributed between different systems, each system within a network has to be clearly identifiable. The u201Clogical systemu201D deals with this issue.
A logical system is an application system in which the applications work together on a common data basis. In SAP terms, the logical system is a client.
Since the logical system name is used to identify a system uniquely within the network, two systems cannot have the same name if they are connected to each other as BW systems or as source systems, or if there are plans to connect them in any way.
Although SAP does not recommend that you connect test systems to production systems, a test system can have the same name as a production system. This makes copying production systems to test systems a lot simpler.
You are only allowed to change the logical system name of a system if the system is not connected to any other systems, because changing the logical system name would render all the connections to other systems useless.
Logical system names must contain capital letters and numbers only. SAP recommends the following naming convention for logical system names: <System-ID>CLNT<Client>.
Regards
sandeep

From R/3 to CRM create one logical system for CRM client 300.

Suppose i create one logical system for CRM in R/3 TO CRM scenario for client 300.another user wants to work on jdbc to CRM client 300 for this he wants to create another logical system for client 300 it is not possible,so,it is ok if he assign same logical system when he was working for CRM client 300 when he wants to create business system for CRM in JDBC to CRM.

Hi,
Business Systems are te logical system name for a CLient in the SAP.
These can be reused again for different configuration scnario that you must have created for different interface.
All you need to do is assing the Business system to your configuration scenario and Communication channel to the same.
Regards
Vijaya

Logical system for new client

Hello experts,
I want to copy all users and assigned roles from Quality to the production system.
But as a safety measure I want to copy the existing users and role assignment from production system too one of the test system.
For this I created a new client in test system. My question is:
1) Do I've to create a logical system for this new client?
2) Is there any other step that I need to take beside creating RFC connection?
Thanks in advance

Hi,
>
> 1) Do I've to create a logical system for this new client?
Yes.
> 2) Is there any other step that I need to take beside creating RFC connection?
>
I think this is sufficient. Check this [link|http://help.sap.com/saphelp_sm40/helpdata/EN/4e/2d5dfaedbf11d3b7f60000e8160175/content.htm]
Thanks
Sunny

Can we define two business system for a Client.

Hi XI Experts,
          We are facing problem regarding the Technical & business system in SLD.
          For deploying the readymade .tpz files , we have to define a technical system as ABAP in SLD.
          under this Technical system one Business system with specific name to be defined.
           But problem is that in Custmor's landscape they have already defined a Technical system & corresponding Business system for a specific client 250.
so while adding the new business system to existing technical system we are facing error:--
        Business system is alredy define for this client , choose another client.
    as a second option we defined a new technical system and when we try to define the new business system under this it also throw error:-
         Client is associated with Logical system name of existing business system.
        suggest the solution .

Hi Sudhir, I think in XI there is 1:n relationship between Technical sysytem and business system.
Means for a technical system we can define a no. of business system , but only limitation is that for a Specific client we can define a single busines system with a logical system name.
so i am looking for any way around. for my scenerio is to add a another business system to the client which has already defined business system.
suggest if any alternative solution is there.
with thanks.

Best export solution for windows clients

Hi,
I need to regularly make files playable & editable on windows machines of all different specs/os versions for various clients.
I've been going to AVI at DV PAL codec, using MPEG Streamclip (cos I like the batch processing), but I've recently started having problems with large files (20 - 30Gb) lately. i hav a test windows box, and Windows Media Player won't open the large files.
I experimented with doing these in Quicktime Pro & in Visual Hub as well. QT Pro gave me nil picture. Visual Hub gave me a 4 Gb file and truncated the rest of the movie.
I've been doing a bit of reading and experts on forums like this keep saying words to the effect "Why are you going to AVI which is obsolete & not supported?"
I have PC based editor friends on Vegas & Premiere, and they say they need AVI.
I could go to WMV as I have Flip for Mac Studio (and Visual hub)..
What I really need is advice on a "lowest common denominator codec/container" combo that plays on Windows media player, so clients can marvel at their home movies, as well as can translate to most lower end PC editing packages, like Windows Movie Maker, Premiere Elements, Ulead, etc., when they decide they want to edit them.
I thought AVI @ DV would be the go..
Any ideas gentlemen?
Pete

Hi kirk,
..thanks for your reply.
It's not a Fat32 problem - I am well aware of that limit. I bought Paragon to be able to write to NTFS from my Mac. Anyway, these files are failing to play back on the Mac that made them.. from the desktop..
I have an imac 17" intel that also has Mpeg Streamclip on it and it's working absolutely fine..
So I was wondering if maybe a software update that has been done on my main machine and maybe hasn't been done of the 17".
Or maybe a hardware issue - My main Mac might be dying or something..
I have the Flip for Mac Studio, and also Virtual Hub, so I can make WMVs - the point is would I want to unless a client specifically requested it? (I've had some TV stations ask for WMVs!)
I thought AVI was the best choice for my clients to be able to future edit their files. Even those who do not choose to edit will burn their own DVDs, so I wouldn't think that H.264 would be a good choice for that, even though I personally really like that codec for other purposes.
One reason I was considering WMV for all PC clients is that then they could all open the files,no matter what their hardware/OS version.. and at least edit the files in Windows Movie Maker. Maybe if they want to edit in Premeier or such, and it wants AVIs, then they can download the PC version of Mpeg Streamclip and do it themselves..
Any ideas?..
pete

4 System Landscape // ChaRM // No Export System found

Hi Folks,
I got some problems with a 4 system landscape in ChaRM.
The error message I get when doing a consistency check within my SMI project is:
Message from function module /TMWFLOW/CHECK_PRJ_CONS: No export system for NWA-303
Message no. /TMWFLOW/TRACK_N159
Transport route should be as follows:
DEV -> QAS -> INT -> PRD
Since I am still in testing phase I used clients instead of real systems in my configuration (TMS, Logical component,....)
My configuration looks like this:
NWA client 300 -> 301, transport layer ZCHM, transport layer SAP, consolidation
NWA client 301 -> 302, delivery
NWA client 302 -> 303, delivery
Logical Component defined as follows:
Developement System (Source: SAP): NWA:300
Type of Role: D Source System
Quality Assurance System (Source: SAP): NWA:301
Type of Role: O Target System
Integration System (Source: User): NWA:302
Type of Role: O Target System
Production System (Source: SAP): NWA:303
Type of Role: P Production System
Anyone got an idea what is wrong? did I miss anything?
The same configuration works for a 3-tier Landscape (without Integration System).
Any help is appreciated.
Thanks.

Hi Raquel,
Ours problems with RFC and with connections had be corrected with the note below:
1833778 - Activate Change Request management - Check error
Thank you very much!!
Adriana

Minimum Trusted RFC's for productive system

Hi!
We have very strict requirements dealing with set up of Trusted RFC for productive system for ChaRM approach in SOLMAN.
Can some one tell me which Trusted RFC's and users for the productive system do I need?
a) Trusted RFC is not mandatory for the productive system
b) Trusted RFC only in productive system, client: 000, users: 1 communication user and 1Dialog user
c) Trusted RFC in productive system for each client with users...
Thank you very much!
H. Thomasson

Create the function modules in SE37 and set the remote-enabled flag in the attributes section. Then import them into XI.
Create a custom Z table through SE11 on each system to store any data, and the code in each function module would reference it. (Either that or just hard-code everything)
In short yes it can be done through SE37, no you don't need SE38.
I think you're talking about function groups which is a container for the function module. You can do everything through SE37 if you use the Goto->Function Groups-> Create Group option and give it the same name as your Function Module.

Create a client and logical system for BW

Hi all,
Can anyone show me how to create a BW client?
create a BW client and logical system for BW client.
create sourcesystems for the other clients in BW.
I have follow some documents
B84: BI Connectivity
B03: General Settings BI Integration
But it's not working the data can't flow to BW server.

hi,
check out the following thread's. it will guide you
Connection steps for SAP BW and R/3
Info required while creating source system
R/3 Source system creation error in BW 7.0
regards
harikrishna N

SOS: module /TMWFLOW/CHECK_PRJ_CONS: No export system for productive client

Similar Messages

Maybe you are looking for