SOS!! PROBLEM WITH MY DISK DRIVES. I'M TOTALL CONFUSED
it looks like my last problem was just the tip of the iceberg. To recap: At the time my goal was to rescue files from the two hard drives in my Mac G4, which I was ready to part with, when I learned dhow much repairs would cost. Can't remember how far along I was in the process when I requested help, but eventually was able to transfer the files from both drives to a much larger Seagate external drive. Before disposing of the drives, I figured I had better erase them, as well. Had I known it was going to take 5 days to run 7 passes, I might have had second thoughts, but once it was completed successfully, I decided to do the same for the second drive, which was much smaller.
My current problem started when I connected that drive to my iMac (via a USB to IDE & SATA cable) and brought up the image; then got cold feet, thinking of the possibility I might accidentally erase everything on my iMac.
Before erasing the larger drive I had "colored " the icon orange in order to differentiate it from the drive on the iMac, but got spooked when the new drive also showed up orange this morning. Also thought I remembered seeing a choice of drives to erase the first time, but this time did not see an icon for the iMac. Also could not find it on the desktop, since it was not where I remembered having seen the last time I looked (probably ages ago — buried in the upper right hand corner — usually under a stack of other files).
After much searching, I found an icon elsewhere on the desktop, but with the name I recalled having given to my G4 — not that of the iMac, which I don't think I ever renamed. . . And when I clicked on its desktop, the files looked familiar, but definitely different than the ones I expected to find. . . On the other hand, clicking on the finder's desktop, brought up all the files I expected. The number of files on drive each also was different. The icon's desktop showed 111 documents; the finder's desktop twice that many . . . but the total unused capacity for both was identical.
All I can think of is that I must have messed up when I first got the iMac several years ago and used a crossover cable to transfer files onto it from the G4. I do recall that my intention was to copy only the files I really wanted, but suddenly ended up with everything from the G4's drive. But even if I did, I suspect but am not sure I understand why I ended up with the G4's icon and not just a bunch of files in a folder. . . Also, if the icon was there from Day 1, does that mean I somehow renamed the iMac's icon, or was there ever an icon for the iMac drive in the first place?
Finally, can someone reassure me that if I just go ahead and erase the "orange" drive, I won't destroy any of the files on my iMac desktop today? Since all I could find in the icon was a bunch of old files, I would sort thru them at my leisure and get on with my life today. I
Still trying to follow last suggestion, but am starting to feel like a Mac newbie. I'm relly not, which makes it even more frustrating.
Have been trying since the weekend to start up from my install disk. (Holding "C" key down while rebooting . . . but the Install searched the Startup Disk Folder, bu it only shows System X and Network.disk is not booting; just sitting on the desktop with the option to install). Have also searched the "Startup Disk fodler" but it only shows system X and Network.
Meanwhile, I contacted Seagate Tech support, which was amazingly helpful, considering their internal drive was added to my now deceased Powermac G4 at least 8 years ago. Technician agreed that the memory probably was "clipped" some way, but emailed a links to 2 files that should work on Mac (http://www.seagate.com/staticfiles/support/seatools/SeaToolsDOS217EURO.ISO
User Guide. and http://seagate.custkb.com/seagate/crm/selfservice/search.jsp?DocId=201271 . . . suggesting that I burn the first one to a separate disk and boot from that. But since my iMac won't recognize another Mac startup disk, am just a little reluctant to try with one that's "outside the family."
Any chance I could end up making my current problemn worse, rather than better?
Similar Messages
-
Please help me, I have a mid 2010 Mac book pro with a toshiba mk3266gsxf harddrive. It started making a clicking noise and then my computer crashed. I proceeded to boot in safe mode, but it doesn't work. When I ran disk utility in recovery mode, it showed no problem with my disk. Does any one know what the problem is?
Sounds like a mechanical problem with the drive and it ruined the sectors where the Macintosh HD partition (and OS X, and files and programs) reside, but not your Recovery HD partition.
If you held command option r while booting, that's Internet Recovery and it's loaded via the Internet, not via the Recovery HD partition on the boot drive, so that could mean the drive is dead mechanically or there is another issue.
In either case the drive will likely have to be replaced, it's a matter of what occured to where and the drive state if you can recover data or not. If you made recent backups then your fine.
My computer is not working, is my personal data lost?
Most commonly used backup methods -
apple new macbook pro dosent have a disk drive. Does the older model have a problem with the disc drive and so is removed in the new model?
No. Apple replaced the disk drive with a solid state drive (SSD) instead. The SSD is faster the old disk drive.
Allan -
[SOLVED] Problem with second SATA drive
My laptop has two hard drive bays, and just recently I added a second SATA drive (moved it from my old laptop) to the extra bay.
Now, anytime the second hard drive /dev/sdb has any heavy disk activity, it appears to cause a shutdown of the SATA port for the first drive (/dev/sda)! Though the second drive is still fine, and I can still write to it until the system crashes from the root drive (on /dev/sda) being shutdown.
If I don't mount and use the second drive, the first drive works just fine, and I can pound it with traffic without issue.
I can reproduce this problem by copying large amounts of data to drive 2.
This is when I get in my dmesg when the first SATA drive shuts down:
[ 3013.249525] ata1.00: exception Emask 0x0 SAct 0x7ff SErr 0x0 action 0x6 frozen
[ 3013.249532] ata1.00: failed command: READ FPDMA QUEUED
[ 3013.249539] ata1.00: cmd 60/08:00:78:b8:ba/00:00:24:00:00/40 tag 0 ncq 4096 in
[ 3013.249539] res 40/00:00:00:4f:c2/00:00:00:00:00/40 Emask 0x4 (timeout)
[ 3013.249543] ata1.00: status: { DRDY }
[ 3013.249545] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3013.249559] ata1.00: cmd 61/08:08:b8:60:7b/00:00:29:00:00/40 tag 1 ncq 4096 out
[ 3013.249559] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 3013.249562] ata1.00: status: { DRDY }
[ 3013.249564] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3013.249568] ata1.00: cmd 61/08:10:c0:60:7b/00:00:29:00:00/40 tag 2 ncq 4096 out
[ 3013.249568] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 3013.249570] ata1.00: status: { DRDY }
[ 3013.249572] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3013.249576] ata1.00: cmd 61/08:18:c8:60:7b/00:00:29:00:00/40 tag 3 ncq 4096 out
[ 3013.249576] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 3013.249578] ata1.00: status: { DRDY }
[ 3013.249580] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3013.249585] ata1.00: cmd 61/08:20:48:12:d7/00:00:18:00:00/40 tag 4 ncq 4096 out
[ 3013.249585] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 3013.249587] ata1.00: status: { DRDY }
[ 3013.249589] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3013.249593] ata1.00: cmd 61/08:28:28:63:38/00:00:19:00:00/40 tag 5 ncq 4096 out
[ 3013.249593] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 3013.249595] ata1.00: status: { DRDY }
[ 3013.249597] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3013.249601] ata1.00: cmd 61/08:30:28:6f:38/00:00:19:00:00/40 tag 6 ncq 4096 out
[ 3013.249601] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 3013.249603] ata1.00: status: { DRDY }
[ 3013.249605] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3013.249609] ata1.00: cmd 61/08:38:28:98:ae/00:00:25:00:00/40 tag 7 ncq 4096 out
[ 3013.249609] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 3013.249611] ata1.00: status: { DRDY }
[ 3013.249613] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3013.249617] ata1.00: cmd 61/08:40:d8:79:3b/00:00:25:00:00/40 tag 8 ncq 4096 out
[ 3013.249617] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 3013.249619] ata1.00: status: { DRDY }
[ 3013.249621] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3013.249625] ata1.00: cmd 61/08:48:08:98:b6/00:00:18:00:00/40 tag 9 ncq 4096 out
[ 3013.249625] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 3013.249627] ata1.00: status: { DRDY }
[ 3013.249629] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3013.249633] ata1.00: cmd 61/08:50:10:98:36/00:00:19:00:00/40 tag 10 ncq 4096 out
[ 3013.249633] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 3013.249636] ata1.00: status: { DRDY }
[ 3013.249640] ata1: hard resetting link
[ 3013.575549] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3013.576784] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 3013.578334] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 3013.578588] ata1.00: configured for UDMA/133
[ 3013.592223] ata1.00: device reported invalid CHS sector 0
[ 3013.592233] ata1.00: device reported invalid CHS sector 0
[ 3013.592238] ata1.00: device reported invalid CHS sector 0
[ 3013.592242] ata1.00: device reported invalid CHS sector 0
[ 3013.592246] ata1.00: device reported invalid CHS sector 0
[ 3013.592250] ata1.00: device reported invalid CHS sector 0
[ 3013.592254] ata1.00: device reported invalid CHS sector 0
[ 3013.592258] ata1.00: device reported invalid CHS sector 0
[ 3013.592263] ata1.00: device reported invalid CHS sector 0
[ 3013.592267] ata1.00: device reported invalid CHS sector 0
[ 3013.592271] ata1.00: device reported invalid CHS sector 0
[ 3013.592302] sd 0:0:0:0: [sda]
[ 3013.592306] Result: hostbyte=0x00 driverbyte=0x08
[ 3013.592310] sd 0:0:0:0: [sda]
[ 3013.592313] Sense Key : 0xb [current] [descriptor]
[ 3013.592320] Descriptor sense data with sense descriptors (in hex):
[ 3013.592323] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 3013.592342] 00 00 00 00
[ 3013.592351] sd 0:0:0:0: [sda]
[ 3013.592353] ASC=0x0 ASCQ=0x0
[ 3013.592358] sd 0:0:0:0: [sda] CDB:
[ 3013.592361] cdb[0]=0x28: 28 00 24 ba b8 78 00 00 08 00
[ 3013.592376] end_request: I/O error, dev sda, sector 616216696
[ 3013.592414] sd 0:0:0:0: [sda]
[ 3013.592417] Result: hostbyte=0x00 driverbyte=0x08
[ 3013.592421] sd 0:0:0:0: [sda]
[ 3013.592423] Sense Key : 0xb [current] [descriptor]
[ 3013.592428] Descriptor sense data with sense descriptors (in hex):
[ 3013.592431] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 3013.592449] 00 00 00 00
[ 3013.592458] sd 0:0:0:0: [sda]
[ 3013.592460] ASC=0x0 ASCQ=0x0
[ 3013.592465] sd 0:0:0:0: [sda] CDB:
[ 3013.592467] cdb[0]=0x2a: 2a 00 29 7b 60 b8 00 00 08 00
[ 3013.592482] end_request: I/O error, dev sda, sector 695951544
[ 3013.592505] sd 0:0:0:0: [sda]
[ 3013.592508] Result: hostbyte=0x00 driverbyte=0x08
[ 3013.592512] sd 0:0:0:0: [sda]
[ 3013.592514] Sense Key : 0xb [current] [descriptor]
[ 3013.592519] Descriptor sense data with sense descriptors (in hex):
[ 3013.592522] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 3013.592540] 00 00 00 00
[ 3013.592549] sd 0:0:0:0: [sda]
[ 3013.592551] ASC=0x0 ASCQ=0x0
[ 3013.592556] sd 0:0:0:0: [sda] CDB:
[ 3013.592558] cdb[0]=0x2a: 2a 00 29 7b 60 c0 00 00 08 00
[ 3013.592572] end_request: I/O error, dev sda, sector 695951552
[ 3013.592583] sd 0:0:0:0: [sda]
[ 3013.592586] Result: hostbyte=0x00 driverbyte=0x08
[ 3013.592589] sd 0:0:0:0: [sda]
[ 3013.592592] Sense Key : 0xb [current] [descriptor]
[ 3013.592597] Descriptor sense data with sense descriptors (in hex):
[ 3013.592599] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 3013.592618] 00 00 00 00
[ 3013.592626] sd 0:0:0:0: [sda]
[ 3013.592628] ASC=0x0 ASCQ=0x0
[ 3013.592632] sd 0:0:0:0: [sda] CDB:
[ 3013.592635] cdb[0]=0x2a: 2a 00 29 7b 60 c8 00 00 08 00
[ 3013.592649] end_request: I/O error, dev sda, sector 695951560
[ 3013.592665] sd 0:0:0:0: [sda]
[ 3013.592668] Result: hostbyte=0x00 driverbyte=0x08
[ 3013.592671] sd 0:0:0:0: [sda]
[ 3013.592673] Sense Key : 0xb [current] [descriptor]
[ 3013.592678] Descriptor sense data with sense descriptors (in hex):
[ 3013.592684] Aborting journal on device dm-0-8.
[ 3013.592701] EXT4-fs error (device dm-0) in ext4_reserve_inode_write:4476: Journal has aborted
[ 3013.592687] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 3013.592723] 00 00 00 00
[ 3013.592729] sd 0:0:0:0: [sda]
[ 3013.592730] ASC=0x0 ASCQ=0x0
[ 3013.592733] sd 0:0:0:0: [sda] CDB:
[ 3013.592735] cdb[0]=0x2a: 2a 00 18 d7 12 48 00 00 08 00
[ 3013.592744] end_request: I/O error, dev sda, sector 416748104
[ 3013.592752] Buffer I/O error on device dm-0, logical block 266057
[ 3013.592760] EXT4-fs warning (device dm-0): ext4_end_bio:250: I/O error writing to inode 5902184 (offset 258048 size 4096 starting block 266057)
[ 3013.592766] sd 0:0:0:0: [sda]
[ 3013.592768] Result: hostbyte=0x00 driverbyte=0x08
[ 3013.592771] sd 0:0:0:0: [sda]
[ 3013.592772] Sense Key : 0xb [current] [descriptor]
[ 3013.592776] Descriptor sense data with sense descriptors (in hex):
[ 3013.592778] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 3013.592790] 00 00 00 00
[ 3013.592795] sd 0:0:0:0: [sda]
[ 3013.592797] ASC=0x0 ASCQ=0x0
[ 3013.592800] sd 0:0:0:0: [sda] CDB:
[ 3013.592801] cdb[0]=0x2a: 2a 00 19 38 63 28 00 00 08 00
[ 3013.592811] end_request: I/O error, dev sda, sector 423125800
[ 3013.592817] Buffer I/O error on device dm-0, logical block 1063269
[ 3013.592822] EXT4-fs warning (device dm-0): ext4_end_bio:250: I/O error writing to inode 5898577 (offset 970752 size 4096 starting block 1063269)
[ 3013.592842] sd 0:0:0:0: [sda]
[ 3013.592845] Result: hostbyte=0x00 driverbyte=0x08
[ 3013.592849] sd 0:0:0:0: [sda]
[ 3013.592851] Sense Key : 0xb [current] [descriptor]
[ 3013.592856] Descriptor sense data with sense descriptors (in hex):
[ 3013.592859] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 3013.592877] 00 00 00 00
[ 3013.592885] sd 0:0:0:0: [sda]
[ 3013.592887] ASC=0x0 ASCQ=0x0
[ 3013.592892] sd 0:0:0:0: [sda] CDB:
[ 3013.592894] cdb[0]=0x2a: 2a 00 19 38 6f 28 00 00 08 00
[ 3013.592908] end_request: I/O error, dev sda, sector 423128872
[ 3013.592915] Buffer I/O error on device dm-0, logical block 1063653
[ 3013.592922] EXT4-fs warning (device dm-0): ext4_end_bio:250: I/O error writing to inode 5902187 (offset 1171456 size 4096 starting block 1063653)
[ 3013.592931] sd 0:0:0:0: [sda]
[ 3013.592934] Result: hostbyte=0x00 driverbyte=0x08
[ 3013.592937] sd 0:0:0:0: [sda]
[ 3013.592940] Sense Key : 0xb [current] [descriptor]
[ 3013.592945] Descriptor sense data with sense descriptors (in hex):
[ 3013.592947] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 3013.592966] 00 00 00 00
[ 3013.592974] sd 0:0:0:0: [sda]
[ 3013.592976] ASC=0x0 ASCQ=0x0
[ 3013.592980] sd 0:0:0:0: [sda] CDB:
[ 3013.592983] cdb[0]=0x2a: 2a 00 25 ae 98 28 00 00 08 00
[ 3013.592997] end_request: I/O error, dev sda, sector 632199208
[ 3013.593006] Buffer I/O error on device dm-0, logical block 27197445
[ 3013.593018] EXT4-fs warning (device dm-0): ext4_end_bio:250: I/O error writing to inode 6425165 (offset 151552 size 4096 starting block 27197445)
[ 3013.593028] sd 0:0:0:0: [sda]
[ 3013.593031] Result: hostbyte=0x00 driverbyte=0x08
[ 3013.593034] sd 0:0:0:0: [sda]
[ 3013.593037] Sense Key : 0xb [current] [descriptor]
[ 3013.593042] Descriptor sense data with sense descriptors (in hex):
[ 3013.593045] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 3013.593063] 00 00 00 00
[ 3013.593071] sd 0:0:0:0: [sda]
[ 3013.593073] ASC=0x0 ASCQ=0x0
[ 3013.593078] sd 0:0:0:0: [sda] CDB:
[ 3013.593085] EXT4-fs error (device dm-0) in ext4_reserve_inode_write:4476: Journal has aborted
[ 3013.593089] cdb[0]=0x2a: 2a 00 25 3b 79 d8 00 00 08 00
[ 3013.593104] end_request: I/O error, dev sda, sector 624654808
[ 3013.593111] Buffer I/O error on device dm-0, logical block 26254395
[ 3013.593115] lost page write due to I/O error on dm-0
[ 3013.593126] sd 0:0:0:0: [sda]
[ 3013.593129] Result: hostbyte=0x00 driverbyte=0x08
[ 3013.593132] sd 0:0:0:0: [sda]
[ 3013.593135] Sense Key : 0xb [current] [descriptor]
[ 3013.593140] Descriptor sense data with sense descriptors (in hex):
[ 3013.593142] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 3013.593161] 00 00 00 00
[ 3013.593169] sd 0:0:0:0: [sda]
[ 3013.593171] ASC=0x0 ASCQ=0x0
[ 3013.593175] sd 0:0:0:0: [sda] CDB:
[ 3013.593178] cdb[0]=0x2a: 2a 00 18 b6 98 08 00 00 08 00
[ 3013.593192] end_request: I/O error, dev sda, sector 414619656
[ 3013.593198] Buffer I/O error on device dm-0, logical block 1
[ 3013.593201] lost page write due to I/O error on dm-0
[ 3013.593211] sd 0:0:0:0: [sda]
[ 3013.593213] Result: hostbyte=0x00 driverbyte=0x08
[ 3013.593217] sd 0:0:0:0: [sda]
[ 3013.593219] Sense Key : 0xb [current] [descriptor]
[ 3013.593224] Descriptor sense data with sense descriptors (in hex):
[ 3013.593227] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 3013.593245] 00 00 00 00
[ 3013.593253] sd 0:0:0:0: [sda]
[ 3013.593256] ASC=0x0 ASCQ=0x0
[ 3013.593260] sd 0:0:0:0: [sda] CDB:
[ 3013.593262] cdb[0]=0x2a: 2a 00 19 36 98 10 00 00 08 00
[ 3013.593277] end_request: I/O error, dev sda, sector 423008272
[ 3013.593283] Buffer I/O error on device dm-0, logical block 1048578
[ 3013.593286] lost page write due to I/O error on dm-0
[ 3013.593298] ata1: EH complete
[ 3013.595707] EXT4-fs error (device dm-0) in ext4_dirty_inode:4603: Journal has aborted
[ 3013.596581] EXT4-fs error (device dm-0): ext4_journal_start_sb:370: Detected aborted journal
[ 3013.596591] EXT4-fs (dm-0): Remounting filesystem read-only
[ 3020.421558] journal commit I/O error
[ 3020.421570] journal commit I/O error
[ 3020.421574] journal commit I/O error
[ 3020.421578] journal commit I/O error
[ 3020.421581] journal commit I/O error
[ 3147.052191] ata1.00: exception Emask 0x0 SAct 0xf SErr 0x0 action 0x6 frozen
[ 3147.052197] ata1.00: failed command: READ FPDMA QUEUED
[ 3147.052209] ata1.00: cmd 60/50:00:d0:48:99/00:00:1c:00:00/40 tag 0 ncq 40960 in
[ 3147.052209] res 40/00:00:00:4f:c2/00:00:00:00:00/40 Emask 0x4 (timeout)
[ 3147.052212] ata1.00: status: { DRDY }
[ 3147.052213] ata1.00: failed command: READ FPDMA QUEUED
[ 3147.052218] ata1.00: cmd 60/18:08:28:49:99/00:00:1c:00:00/40 tag 1 ncq 12288 in
[ 3147.052218] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 3147.052220] ata1.00: status: { DRDY }
[ 3147.052221] ata1.00: failed command: READ FPDMA QUEUED
[ 3147.052226] ata1.00: cmd 60/88:10:48:49:99/00:00:1c:00:00/40 tag 2 ncq 69632 in
[ 3147.052226] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 3147.052228] ata1.00: status: { DRDY }
[ 3147.052229] ata1.00: failed command: READ FPDMA QUEUED
[ 3147.052234] ata1.00: cmd 60/20:18:00:a4:ba/00:00:24:00:00/40 tag 3 ncq 16384 in
[ 3147.052234] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 3147.052236] ata1.00: status: { DRDY }
[ 3147.052239] ata1: hard resetting link
[ 3147.378368] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3148.066853] ata1.00: ACPI cmd ef/5a:00:00:00:00:a0 (SET FEATURES) succeeded
[ 3148.069139] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 3148.069393] ata1.00: configured for UDMA/133
[ 3148.080059] ata1.00: device reported invalid CHS sector 0
[ 3148.080066] ata1.00: device reported invalid CHS sector 0
[ 3148.080071] ata1.00: device reported invalid CHS sector 0
[ 3148.080075] ata1.00: device reported invalid CHS sector 0
[ 3148.080112] sd 0:0:0:0: [sda]
[ 3148.080114] Result: hostbyte=0x00 driverbyte=0x08
[ 3148.080117] sd 0:0:0:0: [sda]
[ 3148.080118] Sense Key : 0xb [current] [descriptor]
[ 3148.080123] Descriptor sense data with sense descriptors (in hex):
[ 3148.080125] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 3148.080136] 00 00 00 00
[ 3148.080140] sd 0:0:0:0: [sda]
[ 3148.080142] ASC=0x0 ASCQ=0x0
[ 3148.080145] sd 0:0:0:0: [sda] CDB:
[ 3148.080146] cdb[0]=0x28: 28 00 1c 99 48 d0 00 00 50 00
[ 3148.080156] end_request: I/O error, dev sda, sector 479807696
[ 3148.080170] sd 0:0:0:0: [sda]
[ 3148.080171] Result: hostbyte=0x00 driverbyte=0x08
[ 3148.080173] sd 0:0:0:0: [sda]
[ 3148.080175] Sense Key : 0xb [current] [descriptor]
[ 3148.080178] Descriptor sense data with sense descriptors (in hex):
[ 3148.080180] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 3148.080190] 00 00 00 00
[ 3148.080195] sd 0:0:0:0: [sda]
[ 3148.080196] ASC=0x0 ASCQ=0x0
[ 3148.080199] sd 0:0:0:0: [sda] CDB:
[ 3148.080200] cdb[0]=0x28: 28 00 1c 99 49 28 00 00 18 00
[ 3148.080209] end_request: I/O error, dev sda, sector 479807784
[ 3148.080216] sd 0:0:0:0: [sda]
[ 3148.080218] Result: hostbyte=0x00 driverbyte=0x08
[ 3148.080220] sd 0:0:0:0: [sda]
[ 3148.080221] Sense Key : 0xb [current] [descriptor]
[ 3148.080224] Descriptor sense data with sense descriptors (in hex):
[ 3148.080225] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 3148.080236] 00 00 00 00
[ 3148.080241] sd 0:0:0:0: [sda]
[ 3148.080242] ASC=0x0 ASCQ=0x0
[ 3148.080245] sd 0:0:0:0: [sda] CDB:
[ 3148.080246] cdb[0]=0x28: 28 00 1c 99 49 48 00 00 88 00
[ 3148.080254] end_request: I/O error, dev sda, sector 479807816
[ 3148.080267] sd 0:0:0:0: [sda]
[ 3148.080268] Result: hostbyte=0x00 driverbyte=0x08
[ 3148.080270] sd 0:0:0:0: [sda]
[ 3148.080272] Sense Key : 0xb [current] [descriptor]
[ 3148.080274] Descriptor sense data with sense descriptors (in hex):
[ 3148.080276] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 3148.080287] 00 00 00 00
[ 3148.080291] sd 0:0:0:0: [sda]
[ 3148.080293] ASC=0x0 ASCQ=0x0
[ 3148.080295] sd 0:0:0:0: [sda] CDB:
[ 3148.080296] cdb[0]=0x28: 28 00 24 ba a4 00 00 00 20 00
[ 3148.080305] end_request: I/O error, dev sda, sector 616211456
[ 3148.080315] ata1: EH complete
I have experimented, and found that if I turn off NCQ on the kernel command line in my bootloader (libata.force=noncq), that it takes longer before the problem occurs. Though, if I write enough to the second drive, it does still happen after a while, just greatly reduced its chances of happening.
Is it possible that the old drive (sdb) is causing the problem? I noticed that it is much noisier than I remember when the drive head moves around.
Another curiosity while I was trying to duplicate the problem:
- I start a large file copy from sda -> sdb
- At the same time in another terminal, I do "find / -print"
- When I hear the drive 2 head moving, it pauses the output of the "find" command.
Every time I hear the head move, I see the find output pause. Its almost like the drive seek on drive 2 causes the whole Sata controller to pause while the head moves. Very odd!
Anyone have any ideas? I think the next thing I will try is borrow a drive from another machine, and do the big write to it to see if I get the same results.
If it is of any help, here is some more info on the laptop:
lspci:
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5)
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5)
00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation HM67 Express Chipset Family LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1251 (rev a1)
01:00.1 Audio device: NVIDIA Corporation GF116 High Definition Audio Controller (rev a1)
07:00.0 Ethernet controller: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet (rev c0)
0d:00.0 Network controller: Intel Corporation Centrino Advanced-N + WiMAX 6250 (rev 5e)
13:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader (rev 01)
13:00.1 SD Host controller: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader (rev 01)
19:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)
cat /proc/interrupts:
CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7
0: 50 0 0 0 0 0 0 0 IO-APIC-edge timer
1: 958 0 0 0 0 0 0 0 IO-APIC-edge i8042
8: 1 0 0 0 0 0 0 0 IO-APIC-edge rtc0
9: 1675 0 0 0 0 0 0 0 IO-APIC-fasteoi acpi
12: 12257 0 0 0 0 0 0 0 IO-APIC-edge i8042
16: 24769 0 0 0 0 0 0 0 IO-APIC-fasteoi ehci_hcd:usb1, mmc0, nvidia
17: 142 0 0 0 0 0 0 0 IO-APIC-fasteoi snd_hda_intel
19: 0 0 0 0 0 0 0 0 IO-APIC-fasteoi rts_pstor
23: 1937 0 0 0 0 0 0 0 IO-APIC-fasteoi ehci_hcd:usb4
41: 1 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd
42: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd
43: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd
44: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd
45: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd
46: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd
47: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd
48: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd
49: 19406 0 0 0 0 0 0 0 PCI-MSI-edge iwlwifi
50: 36099 0 0 0 0 0 0 0 PCI-MSI-edge ahci
51: 14 0 0 0 0 0 0 0 PCI-MSI-edge mei
52: 386378 0 0 0 0 0 0 0 PCI-MSI-edge snd_hda_intel
53: 56803 0 0 0 0 0 0 0 PCI-MSI-edge eth0
NMI: 34 5 19 5 18 4 13 4 Non-maskable interrupts
LOC: 77964 17705 161241 14302 187823 16150 56845 12750 Local timer interrupts
SPU: 0 0 0 0 0 0 0 0 Spurious interrupts
PMI: 34 5 19 5 18 4 13 4 Performance monitoring interrupts
IWI: 0 0 0 0 0 0 0 0 IRQ work interrupts
RTR: 7 0 0 0 0 0 0 0 APIC ICR read retries
RES: 13721 7023 304 110 175 110 213 123 Rescheduling interrupts
CAL: 6941 7677 2774 7670 5804 7568 7655 7673 Function call interrupts
TLB: 366 545 268 179 310 272 212 166 TLB shootdowns
TRM: 0 0 0 0 0 0 0 0 Thermal event interrupts
THR: 0 0 0 0 0 0 0 0 Threshold APIC interrupts
MCE: 0 0 0 0 0 0 0 0 Machine check exceptions
MCP: 29 29 29 29 29 29 29 29 Machine check polls
ERR: 0
MIS: 0
smartctl --all /dev/sda
smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.5.3-1-ARCH] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: ST9500423AS
Serial Number: 5WS354LM
LU WWN Device Id: 5 000c50 044bb741b
Firmware Version: 0005DEM1
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Thu Sep 13 15:26:14 2012 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 105) minutes.
Conveyance self-test routine
recommended polling time: ( 3) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 113 099 006 Pre-fail Always - 54715920
3 Spin_Up_Time 0x0003 098 098 085 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1114
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 069 060 030 Pre-fail Always - 10214892
9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 2030
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 559
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 098 000 Old_age Always - 8590065667
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 053 049 045 Old_age Always - 47 (Min/Max 47/51)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 17
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 871
193 Load_Cycle_Count 0x0032 039 039 000 Old_age Always - 122293
194 Temperature_Celsius 0x0022 047 051 000 Old_age Always - 47 (0 17 0 0 0)
195 Hardware_ECC_Recovered 0x001a 113 099 000 Old_age Always - 54715920
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 67229123085518
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 1947733828
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 2798982459
254 Free_Fall_Sensor 0x0032 001 001 000 Old_age Always - 899
SMART Error Log Version: 1
ATA Error Count: 8 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 8 occurred at disk power-on lifetime: 2017 hours (84 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
04 71 09 a9 00 80 e0 Device Fault; Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
a1 00 00 00 00 00 a0 00 05:21:04.438 IDENTIFY PACKET DEVICE
ec 00 00 00 00 00 a0 00 05:21:04.438 IDENTIFY DEVICE
00 00 00 00 00 00 00 ff 05:21:04.124 NOP [Abort queued commands]
a1 00 00 00 00 00 a0 00 05:20:59.118 IDENTIFY PACKET DEVICE
ec 00 00 00 00 00 a0 00 05:20:59.118 IDENTIFY DEVICE
Error 7 occurred at disk power-on lifetime: 2017 hours (84 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
04 71 09 a9 00 80 e0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
ec 00 00 00 00 00 a0 00 05:21:04.438 IDENTIFY DEVICE
00 00 00 00 00 00 00 ff 05:21:04.124 NOP [Abort queued commands]
a1 00 00 00 00 00 a0 00 05:20:59.118 IDENTIFY PACKET DEVICE
ec 00 00 00 00 00 a0 00 05:20:59.118 IDENTIFY DEVICE
00 00 00 00 00 00 00 ff 05:20:58.805 NOP [Abort queued commands]
Error 6 occurred at disk power-on lifetime: 2017 hours (84 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
04 71 09 a9 00 80 e0 Device Fault; Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
a1 00 00 00 00 00 a0 00 05:20:59.118 IDENTIFY PACKET DEVICE
ec 00 00 00 00 00 a0 00 05:20:59.118 IDENTIFY DEVICE
00 00 00 00 00 00 00 ff 05:20:58.805 NOP [Abort queued commands]
a1 00 00 00 00 00 a0 00 05:20:58.761 IDENTIFY PACKET DEVICE
ec 00 00 00 00 00 a0 00 05:20:58.725 IDENTIFY DEVICE
Error 5 occurred at disk power-on lifetime: 2017 hours (84 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
04 71 09 a9 00 80 e0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
ec 00 00 00 00 00 a0 00 05:20:59.118 IDENTIFY DEVICE
00 00 00 00 00 00 00 ff 05:20:58.805 NOP [Abort queued commands]
a1 00 00 00 00 00 a0 00 05:20:58.761 IDENTIFY PACKET DEVICE
ec 00 00 00 00 00 a0 00 05:20:58.725 IDENTIFY DEVICE
2f 00 01 10 00 00 a0 00 05:20:58.724 READ LOG EXT
Error 4 occurred at disk power-on lifetime: 2017 hours (84 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
04 71 09 a9 00 80 e0 Device Fault; Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
a1 00 00 00 00 00 a0 00 05:20:58.761 IDENTIFY PACKET DEVICE
ec 00 00 00 00 00 a0 00 05:20:58.725 IDENTIFY DEVICE
2f 00 01 10 00 00 a0 00 05:20:58.724 READ LOG EXT
61 00 08 ff ff ff 4f 00 05:20:58.724 WRITE FPDMA QUEUED
61 00 08 ff ff ff 4f 00 05:20:58.724 WRITE FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 6 -
# 2 Short offline Aborted by host 90% 1 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
smartctl --all /dev/sdb
smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.5.3-1-ARCH] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint M6
Device Model: SAMSUNG HM320JI
Serial Number: S16LJF0QB02815
LU WWN Device Id: 5 0f0000 001202815
Firmware Version: 2SS00_01
User Capacity: 320,072,933,376 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0
Local Time is: Thu Sep 13 15:27:10 2012 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 110) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 110) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0007 252 252 025 Pre-fail Always - 2562
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 810
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 092 092 000 Old_age Always - 4842
10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 440
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 154
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 71
194 Temperature_Celsius 0x0022 073 073 000 Old_age Always - 55 (Min/Max 17/55)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 1
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 252 252 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x0032 252 252 000 Old_age Always - 0
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 534
225 Load_Cycle_Count 0x0032 077 077 000 Old_age Always - 236803
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Last edited by johni (2012-09-16 00:46:54)It appears my drive one really is failing. It was the first drive and not the second making the loud head seek sound. I borrowed another drive from a friend, and copied my drive one to it. No problems with the new drive in place.
-
Problem with SSD disk in MacBook Pro
I have a very weird problem with my SSD drive 128 GB in a MacBook Pro (early 2011). The warranty has already expired, I don't have Apple Care.
I had Mac OS Lion installed, and once when I opened the lid as usual to wake the system up, the system appeared to be frozen. I had to shut it down, and when swithched on again, the system didn't load - it was showing the apple and loading circle all the time.
I've tried a lot of things:
1) First I checked the disk loading from the CDs that came with the laptop. Disk verification didn't run for the first time (image), for the second time it showed an error (image)
2) I went to Apple store, where they made a quick hardware check, which showed everything was OK, supposed that it was a software problem a offered me to reinstall the OS. And failed to do that.
3) I took out the hard drive and connected it via USB adapter. I could see and read the contents of the disk.
4) I COULD LOAD the OS and work from the disk, connected by USB
4) I tried to reinstall the OS myself (with the disk connected by SATA), and it was always freezing when searching for available disks.
5) I installed the OS on this drive, connected by USB - all went smoothly, it installed and was working, while when connected through SATA it didn't load.
6) Finally, I swapped my SSD with freshly installed OS with a usual HDD from another mac. BOTH WORK: my SSD in another Mac, and HDD in mine.
So, I've come to a conclusion that the problem is not in the disk itself, and not in my laptop's SATA interface, but in communication with SSD through SATA, probably some controller on the mainboard.
Question: Can anybody suggest anything on how I can confirm or disprove that? Or any thoughts about whether it can be fixable or not?
Thanks.Exactly the same happened to me. Yesterday morning I opened the lid of my MBP8,1 (late 2011) on a meeting with a client and It just did not wake up :-/ After forced reboot it would never boot stuck on the same place.
Now what is happening any HDD will be recognized and booted aswell 10/10 attempts but SSD will not boot eventhough I reinstalled it all. The SSD WILL boot in other MBP and is visible on other systems.
The SSD WILL BOOT via USB.
I do not believe the disk is the problem.
My MB was replaced just few months ago. My SATA cable was replaced some time before the MB.
Filip -
Problem with the Display Driver
Hi.
I just got this message when I started Adobe Photoshop today, that's the CS4 edition, about that there was a problem with the Display driver: "Photoshop have encountered a problem with the display driver, and has temporarily disabled GPU enhancements. Check the video card manufacturer's website for the latest software. GPU enhancements can be enabled in the Performance panel of Preferences"
My problem is not what to do but how to do it. I went to System profiler and found something "ATI Radeon HD 2600 Pro, and: Chipset Model: ATI,RadeonHD2600".
And so I want to ATI's website but can't find what I'm looking for.
Any help?I have cs6 - master collection. I bought it on last december and i didn't upgrade it.
"After Effects" works for some minutes and then it stucks and give the massege above
"Display driver NVIDIA Windows kernel Mode Driveer, Version 334.89 stopped, responding and has succesfully recovered."
and preimer works and suddenly the computer crashes not before giving the massege :
"The NVIDIA OpenGL driver lost connection with the display driver due to exceeding the Windows Time-Out limit and is unable to continue.
The aaplication must close. error code: 7"
I have new computer :
proccesor :Intel Core i7-4700MQ Haswell 2.4GHz
Nvidia Geforce GT 740M
Video NVIDIA® GeForce® GT 740M 2GB
ram 8GB DDR3
hard disk : 1TB 5400RPM + 8GB SSD Cache
operating system :Windows 8 64 bit. -
Mac Pro Early 2008 problems with firewire 400 drives
I am having some sporadic problems with firewire 400 drives and am trying to figure out my best options going forward. System 10.5.2 has hung on me twice in the first week of use, and each time I noticed from console there were some problems accessing one or more of these drives (even though I wasn't doing any reads/writes to/from them). Just before one of the crashes, Disk Utility also had problems "seeing" these drives. My external firewire drives are:
Maxtor OneTouch III 750GB
Acomdata enclosure/Seagate 400GB
LaCie d2/160GB
LaCie w/Lightscribe DVD
I have this "cobbled" arrangement because I just upgraded from an eMac and needed these drives to manage video files, audio files, photos, etc. While I'd love to go out and buy new internals to install in my spare bays, and migrate the data to them, I will have to do that in stages as my budget is tapped out at the moment. My MacPro is the base version of the early 2008 units, with 300GB internal.
In the interim, is it worth troubleshooting firmware updates for these externals, or am I destined to continue to have firewire problems? Is there a straight-forward/inexpensive way to remove these drives from enclosures/install in drive bays with an adaptor? I believe the external hard drives are all ATA type drives.
Thanks in advance for any counsel.I would assume that the Maxtor may be SATA. Does it have an eSATA port? Also, there were a lot of threads (in OS X Leopard forum) about those OneTouch units. Same can be said for LaCie problems.
Yes, check for firmware and configuration. In some cases, and what I do with any new OS, is to reformat all drives - gradually. Given the age of the eMac I'd guess firmware is out of date, and that the drives are formatted some time ago. While you don't have to use GUID, it is a good idea eventually, or just reformat a drive.
Don't forget to test your drives with Disk Warrior (4.1) also.
750GB WD Caviar is $139 SATA.
http://eshop.macsales.com/Specials/XLR8YourMac.cfm?Criteria=&sort=&man=Western%2 0Digital
Are you using daisy chains? you have one FW bus shared by front and back ports. Do you have any on FW800 or using FW400 to FW800 adapter cable? PCI Express FW400 card might even help a little.
Never had trouble with OWC enclosures:
http://www.macsales.com/firewire/ -
Folowing upgrade of my Mini and Powerbook to Tiger I have a problem with target Disk Mode when I attempt to eject the transfer to disk following transfer of my user file. I get an error message to the effect that files are in use and the disk can not be ejected. I try force quit (finder only is running) usually to no effect. Sometimes attempting to verify disk permissions in disk utility will clear the problem and allow me to eject the disk. One time it took close to an hour attempting to eject the disk. Is there another way?
PB Mac OS X (10.4.3)I had this problem with external volumes like ZIP discs and also external hard drives. Sometimes it was an app used on one of the external files still being open (eg. Word for a text file) which had to be quitted first. The "trackpad" button equals the mouse button which is on the PowerBook. Repairing the target disk via disk utility might also help.
-
I have a problem with hard disk
Sorry but use google translate
I have a problem with's hard drive.
I put on a stick windwos 7 versions.
Open on leptop and appears setup is loading file,
Then appears Starting windwos.
So far everything is ok but after the cursor appears and disappears windwos logo fromhard disk light flashes.
The screen stays black and white cursor flashing LED hard drive.
What I do to go?
HP DV 6000 is version Leptop
Please help me!Hi,
Yes, looking at the error from the bios test, it looks like you need a new Hard Disk.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
I'm having problem with hard disk problem. I recently purchased HP pavilion G series notebook.
There is error displaying that there is a problem with hard disk please back up your data and contact manfature. I purchased these recently in 2011 december in india. Please help me what to do.
The error usually means what it says. Back up your data to a thumb drive or something before it crashes and call HP Support for a hard drive replacement.
-
Adobe premiere elements 12 install with no disk drive
Please help me install adobe premiere elements 12 on my new computer with no disk drive. I appreciate your help!
Hi Toopie66 ,
Welcome to Adobe Forums.
Please click on the below mentioned link to download Premiere Elements 12 :
http://www.adobe.com/cfusion/tdrc/index.cfm?product=premiere_elements&loc=us
Once its downloaded Use the serial number and convert it into Full licensed version.
Please reply for any assistance.
Thanks -
Problem with i915 Intel driver panic..
Hello,
I just recently reinstalled Arch on my laptop. I have a problem with my laptop. When I went to install the Nvidia Optimus stuff and configure my Xorg.conf I was met with problems with the Intel Driver timing out. When I boot up I get the normal post screen, then grub, I then go to see the GDM login and instead of getting it I just get a black screen. When I remove the /etc/X11/xorg.conf.d/10-monitor.conf I can boot into Gnome Shell, else I have to switch run levels and login that way. I have every package up-to-date. And I haven't seen an /var/log/Xorg.0.log either else I would have posted it. One other thing is I have added my user account to the Bumblebee account. One other thing is when I move my web browser around my video flickers.. Any help I can receive with this would be greatly appreciated.
uname -a
Linux tux 3.17.1-1-ARCH #1 SMP PREEMPT Wed Oct 15 15:04:35 CEST 2014 x86_64 GNU/Linux
pacman -q xf86-video-intel:
xf86-video-intel 2.99.916-3
pacman -Q xorg-server
xorg-server 1.16.1-1
pacman -Q primus
primus 20131226-1
pacman -Q mesa
mesa 10.3.1-1
pacman -Q lib32-primus
lib32-primus 20131226-1
pacman -Q bbswitch
bbswitch 0.8-18
pacman -Q gdm
gdm 3.14.1-1
pacman -q systemd
systemd 216-3
dmesg | grep i915
[ 1.982842] i915 0000:00:02.0: irq 36 for MSI/MSI-X
[ 2.099424] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
[ 2.127859] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.127862] i915 0000:00:02.0: registered panic notifier
[ 2.147795] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0
/etc/X11/xorg.conf.d/20-intel.conf
Section "Device"
Identifier "Intel"
Driver "intel"
Option "AccelMethod" "sna"
Option "TearFree" "true"
Option "monitor-LVDS" "Monitor0"
BusID "PCI:0:2:0"
EndSection
/etc/X11/xorg.conf.d/10-keyboard.conf
Section "InputClass"
Identifier "Keyboard0"
MatchIsKeyboard "on"
Option "XkbLayout" "us"
Option "XkbModel" "pc104"
Option "XkbVariant" ",qwerty"
EndSection
/etc/X11/xorg.conf.d/50-synaptic.conf
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
/etc/X11/xorg.conf.d/10-monitor.conf
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Monitor"
Identifier "Monitor0"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Intel"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
sudo lspci -v
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
Subsystem: Dell Device 04c8
Flags: bus master, fast devsel, latency 0, IRQ 36
Memory at d1400000 (64-bit, non-prefetchable) [size=4M]
Memory at c0000000 (64-bit, prefetchable) [size=256M]
I/O ports at 7000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [d0] Power Management version 2
Capabilities: [a4] PCI Advanced Features
Kernel driver in use: i915
Kernel modules: i915
01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [GeForce GT 540M] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Dell Device 04c8
Flags: bus master, fast devsel, latency 0, IRQ 7
Memory at d0000000 (32-bit, non-prefetchable) [size=16M]
Memory at a0000000 (64-bit, prefetchable) [size=256M]
Memory at b0000000 (64-bit, prefetchable) [size=32M]
I/O ports at 6000 [disabled] [size=128]
Expansion ROM at d1000000 [disabled] [size=512K]
Capabilities: [60] Power Management version 3
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Endpoint, MSI 00
Capabilities: [b4] Vendor Specific Information: Len=14 <?>
Capabilities: [100] Virtual Channel
Capabilities: [128] Power Budgeting <?>
Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
Kernel modules: nouveau, nvidia
xrandr -q
[adramalech@tux log]$ xrandr
Screen 0: minimum 8 x 8, current 1366 x 768, maximum 32767 x 32767
LVDS1 connected primary 1366x768+0+0 (normal left inverted right x axis y axis) 256mm x 144mm
1366x768 60.05*+
1024x768 60.00
800x600 60.32 56.25
640x480 59.94
VGA1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
cat /proc/bus/input/devices
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/devices/platform/i8042/serio0/input/input0
U: Uniq=
H: Handlers=sysrq kbd event0
B: PROP=0
B: EV=120013
B: KEY=402000000 380307af800d001 feffffdfffefffff fffffffffffffffe
B: MSC=10
B: LED=7
I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
U: Uniq=
H: Handlers=event1
B: PROP=0
B: EV=21
B: SW=1
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
U: Uniq=
H: Handlers=kbd event2
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
S: Sysfs=/devices/platform/pcspkr/input/input4
U: Uniq=
H: Handlers=kbd event3
B: PROP=0
B: EV=40001
B: SND=6
I: Bus=0001 Vendor=10ec Product=0665 Version=0001
N: Name="HDA Digital PCBeep"
P: Phys=card0/codec#0/beep0
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input6
U: Uniq=
H: Handlers=kbd event4
B: PROP=0
B: EV=40001
B: SND=6
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Mic"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input7
U: Uniq=
H: Handlers=event5
B: PROP=0
B: EV=21
B: SW=10
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Headphone"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input8
U: Uniq=
H: Handlers=event6
B: PROP=0
B: EV=21
B: SW=4
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Headphone"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
U: Uniq=
H: Handlers=event7
B: PROP=0
B: EV=21
B: SW=4
I: Bus=0019 Vendor=0000 Product=0000 Version=0000
N: Name="Dell WMI hotkeys"
P: Phys=wmi/input0
S: Sysfs=/devices/virtual/input/input10
U: Uniq=
H: Handlers=kbd rfkill event8
B: PROP=0
B: EV=13
B: KEY=1500b00000000 200300000 0 0
B: MSC=10
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2f/LNXVIDEO:00/input/input11
U: Uniq=
H: Handlers=kbd event9
B: PROP=0
B: EV=3
B: KEY=3e000b00000000 0 0 0
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input12
U: Uniq=
H: Handlers=kbd event10
B: PROP=0
B: EV=3
B: KEY=3e000b00000000 0 0 0
I: Bus=0003 Vendor=0c45 Product=6430 Version=1208
N: Name="Laptop_Integrated_Webcam_2M"
P: Phys=usb-0000:00:1d.0-1.4/button
S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input13
U: Uniq=
H: Handlers=kbd event11
B: PROP=0
B: EV=3
B: KEY=100000 0 0 0
I: Bus=0011 Vendor=0002 Product=0007 Version=01b1
N: Name="SynPS/2 Synaptics TouchPad"
P: Phys=isa0060/serio1/input0
S: Sysfs=/devices/platform/i8042/serio1/input/input5
U: Uniq=
H: Handlers=event12 mouse0
B: PROP=9
B: EV=b
B: KEY=6420 30000 0 0 0 0
B: ABS=260800011000003
glxinfo | grep OpenGL
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Intel(R) Sandybridge Mobile
OpenGL core profile version string: 3.1 (Core Profile) Mesa 10.3.1
OpenGL core profile shading language version string: 1.40
OpenGL core profile context flags: (none)
OpenGL core profile extensions:
OpenGL version string: 3.0 Mesa 10.3.1
OpenGL shading language version string: 1.30
OpenGL context flags: (none)
OpenGL extensions:
OpenGL ES profile version string: OpenGL ES 3.0 Mesa 10.3.1
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.0
OpenGL ES profile extensions:
sudo glxgears -info
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
GL_RENDERER = Mesa DRI Intel(R) Sandybridge Mobile
GL_VERSION = 3.0 Mesa 10.3.1
GL_VENDOR = Intel Open Source Technology Center
GL_EXTENSIONS = GL_ARB_multisample GL_EXT_abgr GL_EXT_bgra GL_EXT_blend_color GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_copy_texture GL_EXT_polygon_offset GL_EXT_subtexture GL_EXT_texture_object GL_EXT_vertex_array GL_EXT_compiled_vertex_array GL_EXT_texture GL_EXT_texture3D GL_IBM_rasterpos_clip GL_ARB_point_parameters GL_EXT_draw_range_elements GL_EXT_packed_pixels GL_EXT_point_parameters GL_EXT_rescale_normal GL_EXT_separate_specular_color GL_EXT_texture_edge_clamp GL_SGIS_generate_mipmap GL_SGIS_texture_border_clamp GL_SGIS_texture_edge_clamp GL_SGIS_texture_lod GL_ARB_framebuffer_sRGB GL_ARB_multitexture GL_EXT_framebuffer_sRGB GL_IBM_multimode_draw_arrays GL_IBM_texture_mirrored_repeat GL_3DFX_texture_compression_FXT1 GL_ARB_texture_cube_map GL_ARB_texture_env_add GL_ARB_transpose_matrix GL_EXT_blend_func_separate GL_EXT_fog_coord GL_EXT_multi_draw_arrays GL_EXT_secondary_color GL_EXT_texture_env_add GL_EXT_texture_filter_anisotropic GL_EXT_texture_lod_bias GL_INGR_blend_func_separate GL_NV_blend_square GL_NV_light_max_exponent GL_NV_texgen_reflection GL_NV_texture_env_combine4 GL_S3_s3tc GL_SUN_multi_draw_arrays GL_ARB_texture_border_clamp GL_ARB_texture_compression GL_EXT_framebuffer_object GL_EXT_texture_compression_s3tc GL_EXT_texture_env_combine GL_EXT_texture_env_dot3 GL_MESA_window_pos GL_NV_packed_depth_stencil GL_NV_texture_rectangle GL_ARB_depth_texture GL_ARB_occlusion_query GL_ARB_shadow GL_ARB_texture_env_combine GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3 GL_ARB_texture_mirrored_repeat GL_ARB_window_pos GL_EXT_stencil_two_side GL_EXT_texture_cube_map GL_NV_depth_clamp GL_APPLE_packed_pixels GL_APPLE_vertex_array_object GL_ARB_draw_buffers GL_ARB_fragment_program GL_ARB_fragment_shader GL_ARB_shader_objects GL_ARB_vertex_program GL_ARB_vertex_shader GL_ATI_draw_buffers GL_ATI_texture_env_combine3 GL_ATI_texture_float GL_EXT_shadow_funcs GL_EXT_stencil_wrap GL_MESA_pack_invert GL_NV_primitive_restart GL_ARB_depth_clamp GL_ARB_fragment_program_shadow GL_ARB_half_float_pixel GL_ARB_occlusion_query2 GL_ARB_point_sprite GL_ARB_shading_language_100 GL_ARB_sync GL_ARB_texture_non_power_of_two GL_ARB_vertex_buffer_object GL_ATI_blend_equation_separate GL_EXT_blend_equation_separate GL_OES_read_format GL_ARB_color_buffer_float GL_ARB_pixel_buffer_object GL_ARB_texture_compression_rgtc GL_ARB_texture_float GL_ARB_texture_rectangle GL_EXT_packed_float GL_EXT_pixel_buffer_object GL_EXT_texture_compression_dxt1 GL_EXT_texture_compression_rgtc GL_EXT_texture_rectangle GL_EXT_texture_sRGB GL_EXT_texture_shared_exponent GL_ARB_framebuffer_object GL_EXT_framebuffer_blit GL_EXT_framebuffer_multisample GL_EXT_packed_depth_stencil GL_APPLE_object_purgeable GL_ARB_vertex_array_object GL_ATI_separate_stencil GL_EXT_draw_buffers2 GL_EXT_draw_instanced GL_EXT_gpu_program_parameters GL_EXT_texture_array GL_EXT_texture_integer GL_EXT_texture_sRGB_decode GL_EXT_timer_query GL_OES_EGL_image GL_AMD_performance_monitor GL_ARB_copy_buffer GL_ARB_depth_buffer_float GL_ARB_draw_instanced GL_ARB_half_float_vertex GL_ARB_instanced_arrays GL_ARB_map_buffer_range GL_ARB_texture_rg GL_ARB_texture_swizzle GL_ARB_vertex_array_bgra GL_EXT_texture_swizzle GL_EXT_vertex_array_bgra GL_NV_conditional_render GL_AMD_draw_buffers_blend GL_AMD_seamless_cubemap_per_texture GL_ARB_ES2_compatibility GL_ARB_blend_func_extended GL_ARB_debug_output GL_ARB_draw_buffers_blend GL_ARB_draw_elements_base_vertex GL_ARB_explicit_attrib_location GL_ARB_fragment_coord_conventions GL_ARB_provoking_vertex GL_ARB_sample_shading GL_ARB_sampler_objects GL_ARB_seamless_cube_map GL_ARB_shader_texture_lod GL_ARB_texture_cube_map_array GL_ARB_texture_gather GL_ARB_texture_multisample GL_ARB_texture_query_lod GL_ARB_texture_rgb10_a2ui GL_ARB_uniform_buffer_object GL_ARB_vertex_type_2_10_10_10_rev GL_EXT_provoking_vertex GL_EXT_texture_snorm GL_MESA_texture_signed_rgba GL_ARB_get_program_binary GL_ARB_robustness GL_ARB_separate_shader_objects GL_ARB_shader_bit_encoding GL_ARB_timer_query GL_ANGLE_texture_compression_dxt3 GL_ANGLE_texture_compression_dxt5 GL_ARB_compressed_texture_pixel_storage GL_ARB_internalformat_query GL_ARB_map_buffer_alignment GL_ARB_shading_language_420pack GL_ARB_shading_language_packing GL_ARB_texture_storage GL_EXT_framebuffer_multisample_blit_scaled GL_EXT_transform_feedback GL_AMD_shader_trinary_minmax GL_ARB_ES3_compatibility GL_ARB_clear_buffer_object GL_ARB_copy_image GL_ARB_explicit_uniform_location GL_ARB_invalidate_subdata GL_ARB_texture_query_levels GL_ARB_texture_storage_multisample GL_ARB_vertex_attrib_binding GL_KHR_debug GL_ARB_buffer_storage GL_ARB_clear_texture GL_ARB_multi_bind GL_ARB_seamless_cubemap_per_texture GL_ARB_texture_mirror_clamp_to_edge GL_ARB_vertex_type_10f_11f_11f_rev GL_EXT_shader_integer_mix GL_INTEL_performance_query GL_ARB_conditional_render_inverted
VisualID 32, 0x20Hi
I assume you have installed the graphic card driver from the Intel website and you use NOT a Toshiba graphic driver which was designed especially for the notebook usage.
Well, Toshiba recommend using the Toshiba drivers. In this case you should try to use the recommended graphic driver which you can download from the Toshiba driver page. -
How do i transfer program from iMac to macbook with no disk drive
Hi I have a imac with cs5. I now have a macbook pro with no disk drive. How do i download the older cs5 onto my new macbook pro? Thanks
You are allowed to have up to two activated installations of each version license you own, so unless you have already installed it to another system, you should be fine. If not, phone customer support. I've never heard of them refusing to reset a person's activations.
-
trying to download CS5 extended on a new laptop with no disk drive. Do not have my old activation serial number to do it online...any help much appreciated.
you need your serial number to activate.
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
Photoshop has encountered a problem with the display driver
I rummaged around in here looking at opengl topics and others associated with the above error, but I'm not seeing what I'm encountering (or I am and I don't recognize it!).....
I bought CS4 a week or so ago, and installed it on a system running XP32 with service pack 3, 4GB of ram withe the /3GB switch set, nVidia 8600 GT card (which according to the list is supported), and multiple spindles for images, scratch, applications, and so on. I found other topics earlier so I downloaded the most recent drivers for my video card.
I'm not crashing and burning, but I'm getting some messages...
I opened an image, and while working on it I wanted to do a transform/warp. I got the message that Photoshop couldn't perform the operation because there wasn't enough memory. It didn't crash but I had to shut down CS4 and restart it to do the warp.
Most recently I opened a couple images for a panorama, and while doing the merge I got the message that "Photoshop has encountered a problem with the display driver and has temporarily disabled gpu enhancements." It tells me to check for the latest drivers - I've ALREADY got the lastest drivers. Again, no crash, just the warning. It completed the panorama.
There have been a couple other occurrences of messages of this type, so I'm curious if there's some set of preferences or system settting I need to adjust to optimize things? I've alrady adjusted the nVidia settings because I also run Lightroom and they're having problems too.
I've read the tech notes for the video and such and didn't find any set of optimizations there so is there a set of adjustments beyond the preferences that needs to be adjusted to improve memory and video performance? And if so, can someone point me to them.As I understand it (suspect at best) XP32 can address 4 gig of memory. the /3gb switch lets the applications get at 3 gig of that. If my video card takes the first 256MB, and XP is guaranteed the other 750 of the 1st gig, and in the CS4 performance preferences I should be giving it from 1462 - 1895 MB (I've given it around 1890), that leaves me with another gig or so... Is that limited to applications or can XP use it? In any case, I'm not crashing, I just get the message every so often about being out of memory. I don't recall ever seeing this with CS3, but new version, new oddities...
Maybe you are looking for
-
hey guys, I am trying to learn MM functional module myself. To start with i need some sample data(SAP existing data) to see how the transaction flows from one screen to another screen. so can somebody give me a starting from basic purchase order tran
-
Travel to UK with iPhone next week. A few questions if you please!
My daughter is going to visit the UK next week. She will be bringing her iPhone. I have bought her a plug adapter that does not convert voltage because it is my understanding that the Apple adaptor will take 220 fine. Also, the data roaming has been
-
Hi BW Gurus How can we extract data crom the R3 CO03 cost analysis? or is there a standard extraction that can be used for this or can you provide me a sample generic extractor that can be used to get this information. thank you very much in advance
-
How to maintain a table without authorization
Hi Can anyone let me know how to maintain a ztable without authrozation Thanks Venkat
-
Can one profit centre be assigned to many business areas?
Hi Can any one tell me that whether "one profit centre be assigned to many business areas"? Regards Rakesh