SOS!! SOS!! HELP ME!!! The mobo won't load/boot windows from the SCSI Drive!!! HELP!!!

Ok so i got the board and the crucial RAM with a new enermax 450W power supply. I am running the 1MB A64 3400+ CG on this board.
I am using the Seagate cheetah 15.3K SCSI drive with a LSI 21320 SCSI controller
(http://www.lsilogic.com/products/ultra320_host_bus_adapters/lsi21320.html )
I am also running a IDE drive on the primary IDE channel set as slave.
I went to the bios and changed the boot order to use the SCSI HD as the first boot device and proceed to intall windows XP. I pressed F6 to install the SCSI drivers and everything went fine until the reboot after all the files has been copied. I would get an error message saying something like:
"NTLDR cannot find boot drive etc"
I have no idea what to do...i tried everything and i am 100% sure that its not my SCSI HD or SCSI card.
PLZZZZ HELP ME!!!!!!! PLZZZ HELP!!!!!

Found it set your boot order to bootable add in card first in the screen shown here courtesy of HardOCP : http://www.hardocp.com/image.html?image=MTA4MjM1MDg3NWxrOFNyWHJRcTNfMl8yNl9sLmdpZg==
That should do ya.
Also be sure that the LSI controller is configured to use the Seagate drive to boot from. There is usually an option of which channel to boot from in the HBA BIOS.

Similar Messages

  • My MacBook Air won't load web pages from the internet. It will connect to phone hotspot and run fine. The apple store reset the library and network preferences and it ran fine for a little bit, now slow again. Any ideas?

    My MacBook Air won't load web pages from the internet. It will connect to phone hotspot and run fine. The apple store reset the library and network preferences and it ran fine for a little bit, now slow again. Any ideas?

    My MacBook Air won't load web pages from the internet. It will connect to phone hotspot and run fine. The apple store reset the library and network preferences and it ran fine for a little bit, now slow again. Any ideas?

  • Printer won't load photo paper from the photo tray

    My HP C7280 won't load the 4x6 photo paper from the photo tray.  The photo tray moves in towards the feeder, but fails to actually load the paper into the feeder.  Any suggestions on how to correct it?  Thank you.
    Mike
    This question was solved.
    View Solution.

    Hey,
    Please take some time and look through this document to make sure that you are loading the paper properly,
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01662562&tmp_task=useCategory&cc=us&dlc=en&lc=e...
    These are the Macintosh instructions but the steps to prepare the photo print are the same but they are steps you would do on Windows just ignore the instructions.
    Have a great day. Get back to me.
    I worked for HP.

  • Mavericks won't load file aliases from the dock

    Before I upgraded to Mavericks I had file aliases in the dock that I could easily click to load the file. Now when I click on a file in the dock I get:
    An attempt was made to resolve an Apple Event reference to a non-existent object (MacOS Error code: -1728).
    I tried re-creating the aliases to no avail. Applications load fine.
    Any ideas?

    Okay I figured it out, it was actually only affecting one application, I installed the update for the application and everything works as it did before.

  • Audio units dont see the presets, have to load by hand from the folder and then save each one,using logic 8, how to overcome please

    oh well its all in the heading sorry, newbie here if you couldnt guess!
    using logic 8 on macbook pro, AUs dont see presets, have to load each one individually from plug ins folder which is sitting inside logic folder.... once loaded have to save each one by hand.... pain!.... any help much appreciated, thanks

    Sorry, meant to include this in the mothership question.
    Steve

  • HT4796 After migrating all of my adobe software (Cs4, cs5, etc.) to my new imac, the software won't open due to many errors. Any help on this?

    After migrating all of my adobe software (Cs4, cs5, etc.) to my new imac, the software won't open due to many errors. Any help on this?

    Welcome to the Apple Support Communities
    Adobe software is conflictive when you use Migration Assistant because their applications don't work properly after migration. If you keep the DVDs or the installers of your software, use them to reinstall all your Adobe applications and they should start working correctly

  • Hi, WWhen I turn on my mac pc, enter my account password my page wont load up , I can access the internet through my families account but not mine. There is a message telling me I need to delete files but the page won't load anything. Any help appreciated

    Hi
    When I turn on my pc and log into my account there is a message telling me I need to delete files. But the page won't load up anything to allow mw to do this. I am concerned I may have lost all my personal info.
    I can log into other family members accounts but not mine.
    Any help appreciated
    Thanks

    You only have to clone your mac when using certain cable modem.  You don't clone your mac when using dsl.
    Greetings from Northern Ontario, Canada

  • I am trying to trash an old version of mackeeper and the trash won't throw it away-error code -8003. Help!

    I am trying to trash an old version of mackeeper and the trash won't throw it away-error code -8003. Help!

    This may possibly help.
    TrashIt:
    http://www.nonamescriptware.com/

  • I'm using Windows 8.1 and the browser won't load any web page. I downloaded the latest one from the website. Any help would be great. All other browsers work.

    I'm using Windows 8.1 and the browser won't load any web page. I downloaded the latest one from the website. Any help would be great. All other browsers work.

    Hi curtismoxam,
    Please try these troubleshooting steps: [[Fix problems connecting to websites after updating Firefox]]

  • Hello everyone...I got my very first macbook pro just today and i have a problem deleting the "test" user account. if i can't delete it, the system won't let me turn off the system. I don't know what to do! HELP!!!!

    hello everyone...I got my very first macbook pro just today and i have a problem deleting the "test" user account. if i can't delete it, the system won't let me turn off the system. I don't know what to do! HELP!!!!

    Have you created another admin user? Go to system preferences click users and click the + to add a user; if you haven't already. Once you have another admin user other then the "test" user make sure you're signed out of the test user account. Sign in with the alternate ADMIN USER that you just created or had created already and go back to SYSTEM PREFERENCES and click the same USERS icon near the bottom. Now select the TEST user and click the - sign. This should prompt you if your sure you want to delete the user account. And your done.
    New User created and Test User deleted... I hope this helps.

  • I upgraded the OS on my iMac to Lion from the App store; and after installation, it restarted and now the operating system won't start up.... it keeps displaying the apple/folder with a question mark and a circle with a line through it! Please help!

    I upgraded the OS on my iMac to Lion from the App store; and after installation, it restarted and now the operating system won't start up.... it keeps displaying the apple/folder with a question mark and a circle with a line through it! Please help!

    Try starting up with your Snow Leopard DVD and see if the disk can be repaired. Once you are at the installer screen go to the Utilities Menu and choose Disk Utility and choose repair disk. You might also want to try Diskwarrior.
    Hope this helps.
    Ben

  • When I publish a pdf collection with index to a CD, the index won't load

    I am using acrobat XI pro. I have a pdf collection with 30 chapters, a table of contents that is linked to each chapter, and an index. I have inserted a bookmark for the table of contents in each chatper. There are lots of cross chapter links. It all works beautifully on my computer, I can click links between chapters, go back to table of contents using bookmark on each document, and conduct a search that uses the right index and breaks results down per chapter. But when I burn the folder to a CD and install on another computer, the index won't load and the table of contents link is broken. the index is there on the CD, every file and the file structure looks identical to what is on my computer hard drive. I have tried different methods of burning the disc. They all say they are successfully burned. But when I insert into another computer (have tried a laptop and desktop), I either get an error message about the index or it just create it at all. I deleted the index and all of its associated files and recreated from scratch, associating each of the 30 chapter to the index again, but still does not work. Help, past deadline already!

    I fail to see the issue. You have added crop marks, have you not? For all intents and purposes those are marks that are supposed to be visible and printable for cutting in the real world. If you don't want them, don't use them. Acrobat can generate them on the fly for printing, anyway.
    Mylenium

  • I am trying to use Adobe Color and the screen won't load

    I am trying to use Adobe Color and the screen won't load. All I get is the 4 spinning squares in the center of the screen. I Am using a Mac. Any help would be much appreciated.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Go to Settings>Store and sign out and sign back in.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iOS device.

  • I've recently update to Yosemite, ever since my Mac won't boot up from the grey screen

    ive recently update to Yosemite, ever since my Mac won't boot up from the grey screen, I've checked on the utilities and disk can not be repaired. I'm gutted is it dead?.........how can I solve this......help please
    <Re-Titled By Host>

    Did you mean Command + Option + R for internet recovery?
    The only key commands I know that involve P is a PRAM reset:
    https://support.apple.com/kb/PH11243?viewlocale=en_US&locale=en_US
    Or maybe I am missing or misunderstanding something?

  • Firefox won't load web pages all the way, what can I do to fix this

    I have this problem where firefox won't load any webpages all the way and if I try refreshing the page it shows some of the webpage but not the whole thing....and now it won't load any images either. I have tried everything that i could think of and nothing works. I can't watch anything on youtube or go on facebook and google won't work either.

    There seems to be something of a pattern in that those are all secure sites (HTTPS address). Have you noticed any certificate errors recently that you might have solved by adding an exception, or does everything seem normal otherwise?
    Here are the usual things:
    When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
    (1) Bypass Firefox's Cache
    Use Ctrl+Shift+r to reload the page fresh from the server.
    Alternately, you also can clear Firefox's cache completely using:
    "3-bar" menu button (or Tools menu) > Options > Advanced
    On the Network mini-tab > Cached Web Content : "Clear Now"
    If you have a large hard drive, this might take a few minutes.
    (2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
    * right-click and choose View Page Info > Security > "View Cookies"
    * Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
    In the dialog that opens, you can remove the site's cookies individually.
    Then try reloading the page. Does that help?
    In case one of your extensions is involved, could you test the page in Firefox's Safe Mode? That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
    You can restart Firefox in Safe Mode using either:
    * "3-bar" menu button > "?" button > Restart with Add-ons Disabled
    * Help menu > Restart with Add-ons Disabled
    Not all add-ons are disabled: Flash and other plugins still run
    After Firefox shuts down, a small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
    Any difference?

Maybe you are looking for

  • Question on Synonyms and Implicit Cursor

    Hi, I've two doubts. Question1: Why Oracle is allowing me to create a synonym even base object does not exist in database. For example in below example user ABC and object def doesnt exist in my database. Why I didnt get any error while creating a sy

  • USING A PCI CARD TO RUN A 320GIG ATA/IDE HD IN A QUICKSILVER G4

    I didn't realise that my model did not support HD's over 120gb. After much reading I found out that I would need a PCI ata 133 card. On checking on ebay it was confusing as to which one. What do I specifically need? There is a range in prices also fo

  • Does Macbook have Virus protection, if yes, where can i find it on macbook?

    ive recently purchased a new macbook, i am unsure if it has virus protection already on it, or do i have to download it from someware?

  • RV220W - Connect to SSL VPN using Win7 Built-In SSTP

    I'm relatively new to establishing VPN connections and I'm having one heck of a time getting everything configured. I'm setting up a RV220W at the office and trying to get VPN steup. I've have gotten Quick VPN connections working using the QuickVPN s

  • Zen V Plus/WIN 98

    My regular computer (WIN XP) is being repaired. I just bought the Zen V Plus today. Can I charge it using USB on WIN 98 SE without installing software to just listen to the radio? or use it to download from my regular CD player? The store?I bought it