*SOS* *SOS* HELP ME :/

*SOS* SOS*
Please Help Me!
- Okay so i downloaded itunes 10.5 at school so i could get iOS5 for my 3gs. i liked it at first then my battery stared to drain and its just a hassle so i want to downgrade to the 4.3.5 software. But being that i dont have the 10.5 iTunes i cant do it. Is there a way to get around this issue? please help Me! ):
nikkolas vincent dohman

There is no approved way to dowgrade your iOS software.

Similar Messages

  • PIN Code Need Help on E51 SOS/F1 Help..!

    Hello guys...
    I want to change my pin code of my phone..
    Currently I'm using Nokia E51.
    I change the PIN Code Request to "Yes" and it asked the PIN code. And so where can i get that pin code? My phone is new one and I already try "12345" and "01234" but it didn't work. So, that means it already wrong 2 times. I was told that i can only wrong 3 times. is it right?
    If so, can u guys guide me or help me or any advice about where is that PIN Code????
    if i want to clear the timer of the call duration,etc. I just input "12345". Its ok and its work too. No other code...
    (But now I change my Lock Code from "12345" to something mix with letter and number) But in the PIN Code Request, i can only enter number. So i think PIN code Request code is not this lock code.
    So, can anyone guide me on this?
    Thanks

    The default pin code is set by your network so phone them and ask what it is.

  • Dead bb curve 8520 SOS need help urgently

    hi guys
    I am experiencing several major issues
    1) my phone had been resetting itself a lot lately without reason and randomly. I then downgraded the OS from 5 to 4 then it continued to do the same so I did the removal of the vendor.xml file in the folder of my win 64 bit computer then the blackberry desktop manager, the BBSAK and the computer cannot find my phone. All it does is flash the LED several times in red and wont even restart or show some evidence of life. I have tried everything please help urgently!!!!!

    Hi and Welcome to the Community!
    Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain connected to a known-good wall charger (not PC USB):
    With the battery inside, connect your BB to the wall charger
    Leave it alone for 2 hours, no matter what the LED or the display does
    Remove the battery
    Wait 15 minutes
    Insert the battery
    Wait another 2 hours, no matter what the LED or the display does
    This has been known to "kick start" some BBs.
    It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
    Obtain a known good and already fully charged additional battery...use it in your BB and see what happens
    Obtain access to a known good and identical BB...use your battery in it and see what happens
    The results of this will indicate if it's your BB or your battery that has the problem.
    Otherwise, please try this drastic method:
    KB27956 How to recover a BlackBerry smartphone from any state
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • SOS!Help! Error 3253

    I just purchased a movie and tried to download it, but I got err. 3253. I already know what it is, could somebody tell me how to fix it? I even tried unistalling and reinstalling itunes, which didn't work.
    Please somebody help!

    Hey There,
    Try turning off any internet security, web accelerators and firewalls. If it works, that means you need to properly configure your settings. Let me know how that works

  • SOS NEED HELP NOW! Cisco SPA504G

    I am trying to set up a Cisco SPA504G in my home office. When it is connected directly to the Zoom Cable Modem all is fine, I can make calls, people can hear me and I can hear them. Now the problem, When I connect it to my Apple Airport Extreme... I can make calls, people can hear me but I cannot hear them.
    ZoomModem -------- SPA504G  Works as it should
    ZoomModem -------- AppleAirport -------- SPA504G People can hear me, I cannot hear them.
    I have tried connecting the phone directly to the zoom via SW port with a cable from the PC port to my Airport... The Airport works but the phone will not.

    I can make calls, people can hear me but I cannot hear them.
    Firewall issue. RTP (Audio) packets from other people are not allowed to pass thru to your phone. Check Airport configuration. Ask in an Apple Airport related forum for help.
    Rate valuable advices. It will help others to found solutions.
    Note the question is off-topic here. It's unrelated to Broadsoft.

  • SOS, Urgent help for Count function

    Hi I need to count to different value on a same column
    SELECT DISTINCT A.job, COUNT(*),
    FROM STDNT_EMPLOYEE A, DATA B,
    WHERE A.EMPLID = B.EMPLID
    AND A.CAREER = B.CAREER
    AND A.YEAR = '2008'
    AND D.SEX = 'M'
    and D.SEX = 'F'// This is the line on question
         GROUP BY A.JOB
    output should be
    JOB     Male Female
    receptionist 10 20
    mechanic 4 0
    bookkeeper 3 6
    Any suggestions?
    Thank you

    missed out the group by function, incase
    SELECT DISTINCT A.job, sum(decode(d.sex,'M',1,0)) male,sum(decode(d.sex,'F',1,0)) female
    FROM STDNT_EMPLOYEE A, DATA B,
    WHERE A.EMPLID = B.EMPLID
    AND A.CAREER = B.CAREER
    AND A.YEAR = '2008'
    group by a.job,d.sex

  • SOS.Please help ASAP . Size matters

    I have a mpeg 4 file. ( 22mb ). I need to add two effects on it, Warp Stabilizer and Snow. After I render it, The file size goes to 1.2GB when I export to quicktime and the audio is out of sink. How can I fix the file size to not go from 22MB to 1.2 GB. The file is 1920X1088. I don't care about audio much as I can overlap it but what can I do to take care of the size and not increase exponentially without losing quality. The file duration is about 50 seconds.

    Rick Gerard wrote:
    PLEASE study up on rendering. You can't be any good at all at producing video if you don't understand rendering things like delivery and production formats.
    Rick is right. This is vitally important, basic, knowledge.
    FAQ: Why is my output file huge, and why doesn't it playback smoothly?
    The under-the-hood reason for your large file size is that AE's output has absolutely nothing to do with the videos you place in your composition. AE works with completely uncompressed frames. Thus, your render is going to be based on that.

  • Urgent, SOS for help: How to show the pdf file name at the right bottow of the page?

    I want to show the pdf file name at the right bottow of the page for filing purpose, anybody knows anything?
    I know it can be showed at the left bottom through adobe printer, but i need it to be at the right bottom.
    thanks.

    The result is a UIWebView that displays a blank page. No errors occur in the UIWebView delegate method. The thing is that data has the correct length, in bytes, for the PDF I am trying to display, and I also get the pdf file in Library/Application Support/iPhone Simulator/4.3.2/Applications/ Does anyone have an idea as to what might be going wrong here or how I can better debug this problem?

  • SOS! Help Please....

    I have a Macbook Pro 2010 15 inch and iPad 2. My Macbook is failing me as it is slow and laggy and planning to upgrade but i do not know if i should get
    a) Another Macbook Pro 15 inch
    b) iMac
    c) A screen for my Macbook (I need a desktop as well as a laptop for school and home because my neck is killing me)
    My iPad isnt useful but it was a birthday gift.
    Another Question: Whats is the difference between a Mac and a normal PC ??

    Maybe you should ask in the forum for MacBook Pro owners as well as other places instead to see - 10.6 on MacBooks has for the last two years generated a lot of similar questions about performance. I doubt you'd find any Mac Pro workstations that are sluggish.
    Maybe it needs a larger or faster hard drive, or add an SSD. Or more RAM.
    Computers need maintenance, and a good backup, erase and restore can also do wonders at times.
    Or you have incompatible software.
    But low free space is one place to start looking.
    Sites such as www.barefeats.com have done comparison tests of macs.
    A PC? laptop or tower? obviously your PC isn't for OS X but you can build to your own spec and needs and run Windows.
    Notebooks
    iPad
    iMac (Intel)
    MacBook Pro
    Snow Leopard

  • System migration process (not complete sucessfully) SOS kindly help

    we have read SAP system copy guide and follow the steps as per guide. we have also deleted temp inconsistant tables. but when we run system copy procedure then error occured.
    (EXP) TABLE: "QCM8ZITAX_SLABS" #20100709122513
    DbSl Trace: prepare() of C_0157, rc=1, rcSQL=-942 (POS(97) Unknown table name:QCMZITAX_SLABS)
    DbSl Trace: SQL PREPARE on connection 0, rc=-942 (POS(97) Unknown table name:QCMZITAX_SLABS)
    (EXP) ERROR: DbSlPrepare/BegRead failed
    rc = 103, table "QCMZITAX_SLABS"
    (SQL error -942)
    error message returned by DbSl:
    POS(97) Unknown table name:QCMZITAX_SLABS
    (DB) INFO: disconnected from DB
    /usr/sap/DEV/SYS/exe/run/R3load: job finished with 1 error(s)
    /usr/sap/DEV/SYS/exe/run/R3load: END OF LOG: 20100709122513

    Hi,
    Based on your description, Microsoft SQL Server is a relational database management system developed by Microsoft. It is a software product, which is used to store and retrieve data requested by other software applications. 
    According to your error message, it seems that the SQL Server is corrupted because of some changed files. Please try to repair the SQL Server installation using the following article:
    http://msdn.microsoft.com/en-us/library/cc646006(v=sql.110).aspx . On the top of the article, select the SQL Server version you have installed on your computer.
    In addition, if you have questions about  system restore after repairing the SQL Server, I suggest you post the question in the
    Windows Server forums. It is appropriate and more experts will assist you.
    Thanks,
    Lydia Zhang

  • Hi My Iphone time dose not work right. Allways i should fix it manually. SOS plz help

    hi All.
    Unfurtunately my phone fell down ( not hardly) bu after that I could not rotat my screen and also my iphone rime dosent work correct.
    Please advise me.
    Regards

    You will have to take the phone to a service provider such as an Apple Store, the carrier who sold it to you, etc., for appraisal on how much it will cost you for replacement.

  • SOS:Who help me:FATAL ERROR: EProxy exited in Gateway of portal 6.1

    Should I modify the port in where ?
    my log info:
    5/15/06 3:12:33 PM CST: Thread[main,5,main]
    ERROR: EProxyConnection cannot create server socket on 80
    java.net.BindException: Address already in use
         at java.net.PlainSocketImpl.socketBind(Native Method)
         at java.net.PlainSocketImpl.bind(PlainSocketImpl.java:447)
         at java.net.ServerSocket.<init>(ServerSocket.java:165)
         at com.sun.portal.util.SRAPServerSocket.<init>(SRAPServerSocket.java:23)
         at com.sun.portal.netlet.eproxy.EProxyConnection.makeServerSocket(EProxyConnection.java:360)
         at com.sun.portal.netlet.eproxy.RProxyConnection.<init>(RProxyConnection.java:69)
         at com.sun.portal.netlet.eproxy.EProxy.handleNoEProxy(EProxy.java:255)
         at com.sun.portal.netlet.eproxy.EProxy.main(EProxy.java:149)
    5/15/06 3:12:33 PM CST: Thread[RProxyHTTPThread,5,main]
    ERROR: FATAL ERROR: EProxy exited

    A single method, not class, is limited to 64k bytes of opcodes.
    Older compilers and JVMs did not check for this. They should have since it can't run. If you have such a method, which can often occur due to complicated JSP, then you need to refactor it.

  • SOS SOS !!The Program Asks me the same number twice

    I am trying to do the exercise 5.11 from Java Deitel 4th edition it says
    "Write an applet that reads five numbers, each between 1 and 30. For each number read, your program should draw a line containing that number of adjacent asterisks. For example, if your program reads the number 7, it should display *******."
    This is my code:
    // Java core packages
    import java.awt.Graphics;
    // java extension packages
    import javax.swing.*;
    public class Exe5_11 extends JApplet {
         public void paint( Graphics g )
    int number;
    String input;
         super.paint( g );
    JTextArea outputTextArea = new JTextArea();
    outputTextArea.setText("Hystograms\n\n");
         for ( int i = 1; i <= 5; i++ ) {
    number = 0;
    while ( number > 30 || number < 1) {
    input = JOptionPane.showInputDialog("Enter Number " + i );
    // convert user's input to an int
    number = Integer.parseInt( input );
    } // end while input
    // display asterisks
    for ( int j =1; j <= number; j++) {
    outputTextArea.append ("*");
    outputTextArea.append ("\n");
    } // end for
    JOptionPane.showMessageDialog( null, outputTextArea,"Hystograms", JOptionPane.INFORMATION_MESSAGE );
    System.exit(0);
    } // end paint method
    } // end class Exe5_11
    The problem:
    The program asks me twice for the first number I don't know why? The logic is good, I think is something related with the scope of the variables or something particular with Java I don't know jet.
    Please help me, I have spent 2 hours in this exercise.
    THANK YOU IN ADVANTAGE!!
    Samuel

    double-post

  • SAP- Confirmation Block- SOS SOS

    HI
    I have created a new Delivery Block
    In the new delivery block, i have selected
    1. Block Order
    2. Prevent Order Confirmation
    I have assigned this new Delivery Block to a Distribution Channel Status
    I have assigned this Distribution Channel Status to a Material in the Sales Org View
    While creating the Sales Order
    SAP mentions the following
    1. Order will be created with confirmed schedule line if stock exists
    2. At the time of saving the delivery block will kick in at the item level and unconfirm the schedule line
    In my scenarion, the schedule line is not getting removed at the time of saving
    I can see the delivery block in display mode at the line item level. But the Confirmed schedule line still exists
    Any inputs on the same will be very helpful
    Thanks in advance
    Harish

    Dear AA,
    Thanks for the prompt reply.
    I have done the assignment in Sales Doc Also .
    Here the issue is the price may change at the time of delivery due to market fluctuation. Hence doing pricing at delivery level also.
    I want this to be checked by some person from other dept. for the rate and then remove this billing block at delivery level in order to go ahead with the Billing.
    Posting Block is not agreed as the Invoice is made and printed out at the time of creation
    If u have any other suggestions, pls. tell.
    Regards
    SD Consultant

  • Oh my God - Applet (hard one) sos,sos,sos,sos

    Hi all,
    I urgently need solution for this program in Java, if sobebody can make this program for me, or even tell me where I can find solution and how?
    Thanks
    You are required to create an interface with the following choices:
    �Choice1: Enter a New Record
    �Choice 2: Modify An Existing Record
    �Choice3: Delete An Existing Record
    �Choice 4: View/Print An Existing Record
    �Choice 5: Exit
    You are implement the selection using the case structure.
    You output after running the applet should look as follows:
    Applet
    1.Enter a New Record
    2.Modify An Existing Record
    3.Delete An Existing Record
    4.View/Print An Existing Record
    5.Exit
    Enter Your Choice: 1
    //that number is in square, I couldn�t draw.
    You chose to add a record
    Applet started
    Important Note:
    You can create the menu as a text-based menu or you can use one of the
    layout managers included in Java. The layout manager inherit from class
    object and implement the layout manager interface. You can use the
    GridLayout layout manager to organise your menu. In this case you should
    Use the setLayout ( ) method.
    P.S. Scool project
    P.S.I�ve got this program to late, so there is no time to do, only solution is copy

    Right............ this post looks surprisingly like "Pamela's" post a day or two ago..
    http://forum.java.sun.com/thread.jsp?forum=31&thread=300004
    Coincidence? I think not.
    /me found a smurf.

Maybe you are looking for