SOS !! SOS !!Will the Alpha PAL8150T Heatsink work for the MSI board and How reliable is this board?
Aviator45 had a problem with his ALpha Pal 8150T Heatsink with his board:
https://forum-en.msi.com/index.php?threadid=52030&sid=&hilight=alpha
I ordered the HS already and now it is starting to worry me. Maybe aviator can tell me if his install went well.
Anywaz...the MSI K8N NEO is the only board available in Toronto, Canada and I need to build my A64 system soon. Seeing so many quirks and complaints on the forum, it is beggining to scare me. Maybe some of u guys can convince me.
Finally, will this MSI board work with the Corsair XMS 2.2.2.5 RAM?
thanks alot!
Check out their website first, then try http://www.newegg.com
Similar Messages
-
How far will the extreme reach and how many users can be on there at the same time?
How far will the airport extreme reach and how many users can be on there at the same time?
Last question first, since that is the easy one......approximately 50 (fifty) users for wireless depending on how active each user might be.
The first question is much more difficult, as distance is not really the issue with wireless.....obstructions are the issue.
A wireless signal can easily travel 300 feet or more with no obstructions in the signal path.
But, a typical wall of sheetrock or wallboard in a home will absorb....on average....15-20% of the wireless signal. Brick or adobe will obviously absorb much more. A ceiling....because it is thicker....will absorb about 25-35% of the signal.
So, if the wireless signal must pass through several walls and a ceiling, there won't be much, if any, of the signal left....even though the distance that the signal travels is not great...for example, 20-25 feet.
Other wireless networks around you at the neighbors can also affect the relative strength of the wireless signal.
The bottom line....locate the AirPort Extreme where wireless devices will receive a signal with the least amount of obstructions in the signal path. Your actual performance cannot be predicted in advance. You will not know how well the AirPort Extreme works for you until you try it out in your home.
If you find that the signal does not reach as far as needed, you will need to add additional "extenders", like an AirPort Express to provide more signal coverage. -
There's no good reason Apple removed the ability to manually save. I work in a project, I save it at a point and then make edits that I may or may not want. It could be 1000 changes I make before I see that I'm not satisfied with them and want to revert back to my last saved session. In iMovie not only can I not do that but the autosave doesn't work and has cost me tens of hours!
iMovie just hit me with a bug saying I couldn't share becuase there wasn't enough memory so I have to quit iMovie, open it up again then try to share it. Well, there IS enough memory so I don't know why it was saying that anyway. But besides that, I was afraid to quit iMovie because the **** thing never saves.
I google and find out I can duplicate a project and that should save it. I do that. Restart it. Bam. None of the changes I've spent the past 2 days on saved....
Why has Apple broken their iMovie like this and is there ANYONE that has figured out a way to make projects save?
This is absolutely the last time I'm using iMovie (or any Apple app that removed manual save) but I've done too much editing to start all over again in another video editor. I need to make these changes AGAIN then save them.
How?!Here is all my battery information if that helps for troubleshooting:
Battery Information:
Model Information:
Serial Number: W01305XA8D3BA
Manufacturer: SMP
Device Name: bq20z451
Pack Lot Code: 0
PCB Lot Code: 0
Firmware Version: 201
Hardware Revision: 000a
Cell Revision: 158
Charge Information:
Charge Remaining (mAh): 4767
Fully Charged: No
Charging: No
Full Charge Capacity (mAh): 5539
Health Information:
Cycle Count: 112
Condition: Normal
Battery Installed: Yes
Amperage (mA): -2234
Voltage (mV): 11819 -
I have already set up NAS hdd as connecting it at USB port of Airport Extreme, i also want to remotely access it from iPhone, so what's the next step? What are some of the best iOS apps can remotely played videos, audios, photos and text files from the NAS hdd and how to configure this setup?
*Edit - I am not able to connect to the NAS when hardwired to the airport extreme.
-
Have downloaded the latest version of ITunes and now i get "Incompatable Application" I tunes will no longer open. have worked my way through FAQ and help to no avail. What am i doing wrong? currently running windows 7.
Have downloaded the latest version of ITunes and now i get "Incompatable Application" I tunes will no longer open. have worked my way through FAQ and help to no avail. What am i doing wrong? currently running windows 7.
-
MOVED: Will the MSI 6800GT 256mb AGP 8x work on...
This topic has been moved to AMD SocketA based board.
Will the MSI 6800GT 256mb AGP 8x work on...ask if you can return the card if it doesnt work cause for me the card wasnt working
https://forum-en.msi.com/index.php?threadid=37778&sid=
from the discussion with other members having the same bug as me it seems that they can be some incompatibiliy with 4x agp motherboard
Poubelle -
will the airport devices and time capsule work with telstras mobile hotspot (Sierra Wireless AirCard® 753S Mobile Hotspot)??
Yes. There are 2 ways you could use these devices:
Wirelessly 'join' the network. This would be slower and doesn't offer extending functionality.
Use an Ethernet cable (through Powerline if you can't run a cable). This is faster and offers extending functionality. I would recommend using Bridge Mode if possible. -
Will the MSI G4MX440-T 64Mb work with 250W UPS?
Hi guys, this is my system:
Celeron 1GHz 256kb cache
Motherboard DFI CA64-TC Rev.A+ AGP4X (AGP2.0,checked with PowerStrip)
256 MB RAM Pc100
ACER CD-ROM 54x
SONY CDRW 48x24x48x
Quantum Fireball HD
Sound Blaster PCI 128
3D Prophet 4500 (in a few days it will be MSI G4MX440-T)
UPS 250W (Brand: LP)
I just ordered the MSI G4MX440-T 64MB (I will have it on Tuesday,not enough money for a G4Ti).
I have read a lot in this (and many other) site about G4s and poor performance with not powerful UPS.
My system, with the 3D Prophet 4500 works just fine.I never encountered instability issues or poor performance.
I read in this site that the combined power of the UPS comes from the below formula:
{[(3.3V x Amps) + (5V x Amps)]/3} x 2
My UPS specs are:
+3.3V =>12A
+5V =>25A
So the combined power of my UPS I suppose it should be 114,13W.
I also read that a system with Athlon 1700+ and a G4Ti needs 200W combined power.
My system,which is less demanding from the above, will it have problems with the G4MX440?
I will repeat myself by saying that with the 3D Prophet I don't have a single problem.
I ask for your advice because I am a little nervous for the possibillity that I will encounter problems.
Thanks for your concern :DHi guys,
They didn't have the G4MX440-T and I bought the MSI G4MX440 -TD8X.
It works with 4x on my mobo but everything works perfectly fine!
My 250W PSU doesn't suffer at all!Can you imagine that?
I tried playing a few demanding games like Morrowind and Ghost Recon (which come with the MSI box) and the performance is awesome!Even at 1280x1024 the games are running smoothly!
I run 3DMARK2001SE and I have a score of 4198(1024x768 32bit)!
After hours and hours of playing I didn't have the slightest crash or any other instability!
And with the case closed there wasn't any increse in temperature (CPU 30 C, internal inveronment 21 C).
So, in conclusion there wasn't any problem with the card and the 250W PSU of my system.However thanks for your concern! :D -
Will the MSI FX5900Ultra NBOX fit in these motherboards?
I am wondering if this video card (NBOX 5900 ultra) will fit in the following motherboards.
ABIT AI7
EPOX 4PCA3+
I appreciate any feedback you guys can offer.How about an IC7-G? The reason I ask is my supplier has only a few mobos to choose from and they dont carry MSI....I would get the MSI board but I can get an awesome deal from my supplier because I did some work for him (about 3/4 of the lowest prices of pricewatch). The mobos that I can get are the Abit IS7, IC7-G, AI7. Epox 4pda and 4pca. Asus P4p800.
The revision 2 epox board has a different heatsink and seems to allow a bit more space than the picture you posted.
Thanks for the help -
I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password. How can I reset the old ipod without affecting the new one and how can I unlock the old one?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software -
I can no longer edit the info for my songs, movies and tv shows. This occurred since I loaded Windows 7 Pro on my C drive, and then fownloaded ITunes 10. Why will the program not allow me to access the track info to edit it?
Ah yes school boy error there out of frustration and discontent..
My issue is with music/apps/films etc not downloading from iTunes / App Store.
They initially fail and message is displayed stating unable to download / purchase at this time, yet if I retry it says I've already purchased (?) or alternatively I go to the purchased section and there they are waiting with the cloud symbol..
However some items get frozen in the download window and cannot be retried or deleted. Message appears stating to tap to retry, but even if you stole every bath and sink in the uk you'd still not have enough taps.
I post here as the iTunes guys are useless in there 'help' and have only advised posting here or phoning apple, at my expense, to explain a problem that could be rectified by forwarding my original email to a techie. However the tech team apparently don't have an email address as they're from ye olde Middle Ages..!
Anyways I digress.
So I tried sync to pc, but instead of showing the file as ready to listen/use/view, the iCloud symbol shows and I'm back to square one as the item is unable to download..
At frustration station waiting for a train from pain...
All my software is up to date, and had all worked fine prior to the last big iOS update that resulted in all the changes in display and dismay.
Answers in a postcard :-)
Much love -
I am attempting to upgrade from Adobe Premier Elements 9 to Adobe Premier Elements 13 after using 13's trial version for a few weeks. I am unable to find where and how to do this without losing the project I have been working on. Please help?
Vere Clarke
Premiere Elements 9.0/9.0.1 and Premiere Elements 13 are standalone products.
So, you can have both on the same computer, but only open one for your work.
The classical recommendation is to finish a project in the version in which it was created since there
is no guarantee that a project from an earlier version will open in the later version. Probably will, but
no guarantees. And, when you do explore this, do it from a copy of the earlier version project. Once you
take the earlier version project into a later version one, you cannot go back to edit the later version edited
project in the earlier version program.
If you have both versions (9 and 13) on the same computer and you have not moved, deleted, renamed any of the version 9's files/folders,
right click the saved closed Premiere Elements 9.0/9.0.1 project file, select Open With, and then Adobe Premiere Elements 13.
(Your 9.0/9.0.1 saved closed project file should be found in Libraries/Documents/Adobe/Premiere Elements/9.0.)
Please review and consider. If any questions or need clarification, please do not hesitate to let me know.
Thank you.
ATR -
After reformatting iPod to NTFS and restoring back with iTunes, the player works for two-three weeks and crashes afterward. It then requests to restore it through iTunes. When connected to iTunes, it sees it in the restore mode and also asks to restore the iPod. It happens over and over for the last months. What could be the problem?
iPod Classic 80Gig.
Thanks in advance.Dear planb77
Thanks for a reply. iPod does not support ntfs - you're right. that means it will never work on that. While restoring ipod using iTunes, itunes reformats it no matter what filesystem is there. So the issue is not that. ipod is now on fat32 and it works for a certain period of time, but then crashes and asks to restore through itunes. Resetting/restarting does not help. -
Employee works for 4 org units and want to distribute the cost to 4 cost ce
Hi Experts,
I am in the implementation phase, requirement gathering.
I have scenerio where, Employee works for 4 org units and want to distribute the cost to 4 different cost centers.
so that I can be able to find the exact cost occured for each Org unit.
Please let me know how to map this in SAP?
P oints will be rewarded fully
Kindly dont post if you are not sure of your solution friends.
Thanks
JayHello,
Infotype 0027 is the standard solution for multiple reporting / multi tasking in SAP.
but also check which org unit he will be primarily assigned.
Regards -
Has anybody downloaded logic pro from the app store and how did it work thanks
has anybody downloaded logic pro from the app store and how did it work?
thanksI've recently upgraded my stuff with a Mac Mini Server and downloaded Logic from the app store with absolutely no problems at all. I'm on 10.7.3 with an i7 processor and 4Gb memory (yeah, may as well put another 4 in as well, I know).
Logic 9.1.6 is running very smoothly for me, but I think I'll go to 9.1.7 because there is a malfunction with time stretching regions in the Arrange window that the update's meant to fix.
A lot of your experience with downloading the additional content, apart from Logic itself, will depend on the speed of your internet connection, but the software handling of that aspect seems quite good - best to just load one lot of stuff at a time and see how it works out.
Maybe you are looking for
-
I have a VPN setup using L2tp over ipsec. Using Leopard 10.5 it worked with no problem. With Snow Leopard it connects and works fine for about 45 minutes. Then it drops out. I then try to communicate with my wireless router with no success. I disconn
-
Contact showing online when they are offline
Same problem. Maybe it is depending on version/OS running.The situation is as follows: Using Skype (last version) simultaneously on laptop, running Ubuntu Raring, and tablet PC, running Android 4.2.2. Skype is switched on on both machines, but active
-
How to over come this error ???
hi all.... i have the following error constantly.. how to rectify this error ?? error: [mxmlc] C:\Documents and Settings\indukl1\Workspaces\MyEclipse 8.5\flexuploader\flex_src\FileUploader.mxml(859): col: 3 Error: The element type 'mx:itemRendere
-
How do I get 10.7.2 to load on my brand new MACS!? Thanks for your help folks! David
-
No sound and PC shuts down when I try to watch anything streaming
Just finished build PC with a 970A-G46 mobo, FX6300 , 8GB Cosair DDR3 1333MHz Ram, Sapphire HD 6570 Ultimate 1024MB GPU and CIT 750W PSU and running Windows 7. Connected by HDMI cable to monitor which works with my old PC. I currently have no sound t