SOS! The database does not start and the license key can not be installed.

Hi,
I have installed the SAP Netweaver 200s testdrive on linux x86-64. I have got the hardware key and requested a license key. I have received an E-mail with the license key (N4S.txt) attached.
Unfortunately, I am not able to active the installation with this license.
I always get the error: "open of N4S.txt failed: No such file or directory"
I have renamed the license as N4S.rpm but it still not working.
Furthermore, I could not start the database in the previous step. I have got the error: Database failed to start.
Does anyone already have the same errors? Your help will be so greatful.
Thank you.
Jodie

Hello,
yesterday, I have tried your propositions but nothing doesn´t change.
@Joe
"You might want to check installation log files.."
I do it but I did not see any error.
@Marcel 
"Which Linux distro did you use?..."
I have the linux Opensuse 11.1
@Hannes
"you mentioned, that you are not able to start the database. Unfortunately, your error message
does not give us any details of what happened"
I follow the Installation´s help file of SAP, I didn´t have any error before this step of the Installation (Start the Database: entering the command startdb).
1) did the installation finish successfully?
Until the request of the License key, the installation goes without errors.
2) logon as n4sadm (su - n4sadm) and execute: startsap n4shost
What is the output?
"No start profiles found"
3) check /home/n4sadm/startdb.log (or any other start*log files there)
This is the content of the startdb.log file:
lun. mars 2 23:05:13 CET 2009
LOGFILE FOR STARTING DATABASE
Trying to start database ...
lun. mars 2 23:05:13 CET 2009
Checking required environment variables
SAPSYSTEMNAME is >N4S<
Start database with xuserkey >c<
lun. mars 2 23:05:13 CET 2009
Connect to the database to check the database state
dbmcli: connect check finished with return code: 0
Database not available
lun. mars 2 23:05:14 CET 2009
Starting XServer
    12798  NISERVER NI support started.
WNG 12453  NISSLSRV NISSL Init: SSL: Could not locate licence file
    12902  XSERVER  started, 'X64/LINUX 7.6.00   Build 018-123-119-055'
lun. mars 2 23:05:14 CET 2009
Starting database
Starting Database Instance...
Error! XUser not found!
Opening Database...
Error! XUser not found!
lun. mars 2 23:05:15 CET 2009
Connect to the database to verify the database is now open
dbmcli check finished with return code: 0
Database start failed
Thank you for another propositions
Jodie

Similar Messages

  • I taked this through with a mac support agent, but forgot the method, As my Opticle drive fefuses to burn a full ML dvd   Re setting be re starting and pressing some keys, Can you help?

    I taked this through with a mac support agent, but forgot the method, As my Opticle drive fefuses to burn a full ML dvd
    Re setting be re starting and pressing some keys, Can you help?

    I taked this through with a mac support agent, but forgot the method, As my Opticle drive fefuses to burn a full ML dvd
    Re setting be re starting and pressing some keys, Can you help?

  • HT4623 Hello I upgraded my iPhone to version 6.1 and the device does Hfalhsl iPhone and it stuck on can not start the iPhone

    Hello I upgraded my iPhone to version 6.1 and the device does Hfalhsl iPhone and it stuck on can not start the iPhone

    Find an answer somewhere else or buy a new phone.
    You can not get help here for a hacked/jailbroken phone.

  • Hello I upgraded my iPhone to version 6.1 and the device does Hfalhsl iPhone and it stuck on can not start the iPhone

    Hello I upgraded my iPhone to version 6.1 and the device does Hfalhsl iPhone and it stuck on can not start the iPhone

    Find an answer somewhere else or buy a new phone.
    You can not get help here for a hacked/jailbroken phone.

  • Database does not contain a URL for the file

    How do I find out what file/update this is:
    The file digest/hash does not exist in the SUSDB, but I have no idea looking at the windowsupdate or softwaredistribution.log what file it is referring to.
    SELECT  [FileDigest]
          ,[DigestAlgorithm]
          ,[AdditionalHash]
      FROM [SUSDB].[dbo].[tbFileHash] fh
      WHERE fh.FileDigest =0x15B82F101E79C1E2181E43CC8A3CC137CBFDC91D
      or fh.AdditionalHash =0x15B82F101E79C1E2181E43CC8A3CC137CBFDC91D
    0 rows found
    Softwaredistribution.log
    2014-10-07 23:07:04.319 UTC    Error    w3wp.5    ClientImplementation.GetExtendedUpdateInfo    System.ArgumentException: The database does not contain a URL for the file 15B82F101E79C1E2181E43CC8A3CC137CBFDC91D.
    Parameter name: fileDigests
       at Microsoft.UpdateServices.Internal.DataAccess.ExecuteSpGetFileLocations(Byte[][] fileDigests)
       at Microsoft.UpdateServices.Internal.DataAccessCache.GetFileLocations(Byte[][] fileDigests, DataAccess da)
       at Microsoft.UpdateServices.Internal.ClientImplementation.GetExtendedUpdateInfo(Cookie cookie, Int32[] revisionIds, XmlUpdateFragmentType[] fragmentTypes, String[] locales)
       at Microsoft.UpdateServices.Internal.ClientImplementation.GetExtendedUpdateInfo(Cookie cookie, Int32[] revisionIds, XmlUpdateFragmentType[] fragmentTypes, String[] locales)
       at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
       at System.Web.Services.Protocols.LogicalMethodInfo.Invoke(Object target, Object[] values)
       at System.Web.Services.Protocols.WebServiceHandler.Invoke()
       at System.Web.Services.Protocols.WebServiceHandler.CoreProcessRequest()
       at System.Web.Services.Protocols.SyncSessionlessHandler.ProcessRequest(HttpContext context)
       at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
       at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
       at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error)
       at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb)
       at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context)
       at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
       at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
       at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
       at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)

    How do I find out what file/update this is:
    Hows about.. rather than chasing a rabbit down the hole doing whatever you think you're doing...
    We start with this: What problem is it that you're actually trying to solve?
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • Database does not exist in the specified path

    Just bought a USB 6009 DAQ and for some reason I now keep getting this error: "Database does not exist in the specified path" in VI Logger 2.0.1 it was working.  Can anyone help??

    Jared,
    It sounds like VI Logger somehow lost its association with its
    database. Please open MAX and check out the "Historical
    Data"->"Citadel 5 Universe" entry. Under "My Computer" in the
    right-hand pane, you should have a database called "VI Logger Data". It
    must be spelled, spaced, and capitalized the exact same way. If you do
    not have this database (which I suspect you do not), right click on "My
    Computer" and select "Create/Attach Database..." The default database
    path (if you want to have access to your old data) is C:\Documents and
    Settings\All Users\Application Data\National Instruments\VI Logger,
    with the database name as "VI Logger Data". If you want to create a new
    database, then specify a new path.
    If "VI Logger Data" does appear, a possible fix is to detach and
    reattach it. Right click on "VI Logger Data," select
    "Detach/Delete...," and chose the "Detach" option. Finally, reattach
    the database as described above.
    Hope this helps,
    Ryan Verret
    Product Marketing Engineer
    Signal Generators
    National Instruments

  • Database could not be opened. May be caused because database does not exist or lack of authentication to open the database.

    Hello,
    I've been running the DMV 'sys.event_log', and have noticed that I am getting a lot of errors about connection issues to some of my SQL Azure databases saying "Database could not be opened. May be caused because database does not exist or lack of authentication
    to open the database."
    The event type column says: 'connection_failed' and the event_subtype_desc column says: 'failed_to_open_db' both are associated with the above error message.
    I know that these databases are on-line as I have numerous people connected to them, all of whom are not experiencing any issues.  My question is, is there a query that you can run on SQL Azure to try and find out a bit more information about the connection
    attempts?
    If this was a hosted SQL solution it would be much easier.
    Marcus

    Hello,
    As for Windows Azure SQL Database, we can't access the error log file as On-premise SQL Server. Currently, it is only support troubleshooting the connection error with the following DMV. The SQL database connections events are collected and aggregated in
    two catalog views that reside in the logical master database: sys.database_connection_stats and sys.event_log. We can use sys.event_log view to display the details if there is error occurs.
    Just as  the connection failed describe, it may ocurrs when user didnot has login permission when connect to the SQL Database. If so, please verify the user has logon permission.
    Regards,
    Fanny Liu
    Fanny Liu
    TechNet Community Support

  • RCU-6002:The specified database does not meet the minimum requirement to

    I did all that is neccessary to let RCU to run but met the issues below. Really,this is not so good for me.pls has anyone a solution to this?
    RCU-6002:The specified database does not meet the minimum requirement to load metadata repository.
    RCU-6080:Global prerequisite check failed - Check requirement for specified database
    The database you are connecting is not a supported version. Enter Database with version equal to or higher than 10.2.0.4.0 in 10g or version equal to higher than 11.1.0.7.0 in 11g. Refer to the certification matrix for supported DB versions
    Mcdonald gabriel

    Hi Dear,
    You need install the database version 10.2.0.4.0 in 10g or version equal to higher than 11.1.0.7.0 with the database character set AL32UTF8.
    Best of Luck

  • My database does not start automatically

    i am using windows 2000 server and oracle 9.0.1, my database does not start automatically when i am booting the system.
    in regedit autostart is there, my service is getting started automatically and i used startmode auto in my oradim command but still i have to manually log in to start the database, PLS help!!!
    another issue is that i want to startup/shutdown the database using a user other than sysdba, pls tell which permission shud i grant as dba, connect, resource permissions are not doing the required job

    spfile concept is introduced from Oracle 9i. You can call it system parameter file. Benefits of having spfile concept is that what ever changes u make to system through commands
    alter system set ??? = ????
    get automatically saved in the spfile???.ora which is managed by Oracle.
    Main idea behind that as thought by Oracle is that previously u needed to change that parameter in init.ora file then start the database again after shutdown. Now u are doing everything online. spfile???.ora takes priority in the new Oracle concept.
    If u delete spfile???.ora file, then it needs some specific init.ora which need to told to Oracle which can be through command like
    startup pfile='complete patah .............'
    Bansal

  • Database does not open when starting NT service

    Database does not open automatically when starting NT service. It can be opened manually only, through the one of administrative utilities. Can this problem occur due to small SGA size? (in my case - 32 Mb)
    OS: Windows NT SP6
    Database: 8.1.6
    Ilya.

    sounds more like your permissions aren't set correctly on the services startup menu. you could also have a post-job to run after the server restarts - using oradim you can start the service and the db all at once.

  • Questions regardin "Oracle Database does not support Hyper-V and "

    Platform 287 Microsoft Windows Server 2008 (64-bit Itanium)
    1 - Can you give me some details about what is not supported of the Hyper-V environment?
    2 - There are know issue running Oracle in a Hyper-V child partition/virtualized partition ?
    2 - There are know issue about curruption of datafile using snapshoting,
    Thanks in advance.

    Hello.
    Can anybody explain, how should I understand this "Certification Information" from Oracle metalink?
    ==Quote ==
    "Oracle Database is certified with the following Windows Server 2008 editions:
    * Windows Server 2008 Standard (x86 and x64)
    Oracle Database does not support Hyper-V and Server Core in Windows Server 2008.
    ==/Quote==
    Does it mean that this OS is supported, but only if it does not run in Hyper-v configuration?
    Thanks for your advice.
    Jakub

  • SP1 does not get installed when the machine is set to Japanese Language, software push through sccm 2012

    Hi,
    Please help me with the below issue, iam trying to deploy Service pack 1 on Windows 7 , 32 Bit OS
    SP1 does not get installed when the machine is set to Japanese Language, software push through sccm 2012 , it does gets installed of installed manually, by remoting into the machine
    also it gets installed through sccm when the machine is set to english language, 
    Thank you
    Tanoj
    OSLM ENGINEER - SCCM 2007 & 2012

    Hi Friends,
    we are deploying the SP1 via SCCM 2012 , and the success rate is around 50 %, its a Light touch installation where user will initiate the installation via Software Center ( Web based )
    i was able to gather few errors , and this are the errors which failed during SP1 Installation 0x800f0828,
    some errors which sccm reports display are 
    11171
    10008
    10021-
    17031 - 
    1602 - User Cancelled installation
    113 - No more internal file identifiers available
    10070 - File handle reference is no longer available
    10050 - A socket operation encountered a dead network
    11170  - The task sequence manager could not successfully complete execution of the task sequence
    i could not find the reason for some of the errors, also i am looking for a fix/woraround if any
    Also i have noticed that in few computers the task seq failed at a place where after the sp1 installation a reboot happens and then PGP BYPASS utility is uninstalled, it did not start the PGP bypass uninstall after reboot
    is there a way to cut short the Task seq and keep it simple ?
    right now its like this 
    1. checking for prerequisite : checks for OS Name and OS version
    2. installs PGP Bootgaurd Bypass
    3. System Restart
    4. Installing Windows 7 Service Pack 1
    5. Final Restart
    6. uninstall PGP Bootgaurd Bypass
    Regards
    Tanoj
    OSLM ENGINEER - SCCM 2007 & 2012

  • I have PSE7 on my old computer and I have the license key (but not the serial number). Cannot register it on my new computer - I get a message saying that number is invalid. What can I do?

    I have PSE7 on my old computer and I have the license key (but not the serial number). Cannot register it on my new computer - I get a message saying that number is invalid. What can I do?

    It does not magically appear in a new place.  It will only be where you put it.
    Copy everything from your old computer, or your backup copy of your old computer, to your new one.

  • DB Connector Error : the license key does not include use of OpenSQL driver

    Hello,
    I am new developer on Crystal Report tool and i face an issue : When I try to refresh data I get the following error message :
    DB Connector Error : the license key does not include use of OpenSQL driver.
    Does someone know how to get the correct license key ?
    Many thanks for your help!
    Regards,
    Christiane

    Hi Christiane,
    What version of Crystal Reports are you using?
    Who owns the OpenSQL driver?
    Thank you
    Don

  • Hi! I've got CS3 Design Standard - the actual disks and Software License certificate. It was installed on my laptop which crashed and could therefore not be uninstalled. I have now installed it on my new MacBook Pro, but cannot get it registered with the

    Hi! I've got CS3 Design Standard - the actual disks and Software License certificate. It was installed on my laptop which crashed and could therefore not be uninstalled. I have now installed it on my new MacBook Pro, but cannot get it registered with the serial number. Is it because it wasn't uninstalled on the previous laptop? What to do now?? Thx!

    Maybe this can help someone else...  I simply had to properly uninstall CS3 and reinstall it again after that.  I think that sorted it!  I also remember having a similar issue with Macs at work a couple of years back.  Not sure whether the same applies to CS5/CS6.  Here's a link on how to properly uninstall CS3 on Windows XP, Windows Vista and Mac OS.  I'm on OS X 10.9.2 but it worked just fine.  Remove Creative Suite 3 and CS3 products

Maybe you are looking for

  • Maintaining BW authorization data in R/3

    Hi, I am faced with a new problem now. My client wants to maintain BW authorization data in R/3 for ease of maintainence. I have used two ODS template for data (value) and (hierarchy) - (0TCT_DS01 and 0TCT_DS02) and have created two data targets for

  • Creative Cloud shows 4 updates but is stuck

    Hi Creative Cloud shows 4 updates but is stuck and nothing happens when update is clicked, nor you can agree to the new agreement, nor you can quit and restart the app (and why should you). see screen shot. Cheers, Mic

  • My Day With Adobe CC

    Well I've had a [expletive deleted] of a day with your Adobe Creative Cloud. Let me tell you about it: 1) Had to replace a single bit of video footage in Premiere project I was working on. It was eported as an FLV originall, as it was a Flash file or

  • Documents are not included in COPA

    Hi COPA Experts, The accounting documents are not included in COPA KE21N settings. could you please assist us how to include accounting document in COPA.

  • Broken Link to iDVD Project File

    I created an DVD from iMovie just fine. However, when I try to use the iDVD Project file, it cannot find the shared file. This means I have to redo the iDVD opening screens whenever I make changes in iMovie, and want an updated DVD with the latest ch