Sounblaster Audigy 2 installation troubles under Windows 7

Please see the discussion started at Microsoft,
http://social.answers.microsoft.com/Forums/de-DE/w7hardwarede/thread/c00e2-82a2-4ab-8430-39efb9c45806:
Hi. Was almost htrough with installing all my applications under Windoes7, even my soundcard was responsding to MIDI..., and Windows 7 even got me the newest audio driver for the card.
BUT then I noticed i could not record any sound. I was prompted to reinstall the software.
When the installation process reched the point of installing the driver (of course, on the CD-ROM that one was older!), the whole system was frozen and I could only shut down. After that, Windows7 would not start anymore. No chance, no restoring an earlier point of installation (they were all gone).
Well, I made it all new, but now the device manager keeps telling me there is no Audio Device, but additionally a PCI problem.
When I tried to install the Soundblaster-software, the program quit "no Soundblaster Audigy 2 card in thie computer".
When I swichted back to Windows XP, I found the soundcard properly working.
So please can someone date me up?
Please. Thanx.
+ + + edited Jan 3rd., 200:
As no one replied, I have given up and cancelled all? efforts to migrate to Windows 7.
At least, I found a lot of new downloads at CREATIVE, creating a lot of new troubles.
THANKS FOR YOUR KIND HELP :-(
Wire.

Thanks for your quickly response.
I`m very glad for the answer.

Similar Messages

  • Installation problem under windows XP

    My PC runs under Windows XP. I want to install LabVIEW. The installer begins to copy files and displays the message "L'application n'a pa réussi à s'initialiser correctement (0xc0000142). Cliquez sur OK pour arrêter l'application). " (I've the french version). If I click on OK, the message appears again, ant the task is very difficult to kill. despite this message, the installation continues to run but never ends. After a moment, there was no more activity. The only thing I had to do was to reboot the PC.
    The anti virus was desactivated. I tryed again with the administrator profile but with no more succes.
    Could someboty give me some explanation?
    Thanks.

    Try copying the CD to your hard drive and installing from there. I have never received this exact error but have seen other installations repaired by this procedure. It's worth a try.
    J.R. Allen

  • All-in-one driver installation fails under Windows 7

    I am trying to install the all-in-one printer driver for Windows 7, 64-bit, Service Pack 1.  I have downloaded the installer from HP (AIO_CDB_Net_Full_Win_WW_130_141.exe), downloaded it using HP Print and Scan Doctor 4.3 and using the HP Printer Install Wizard (hppiw.exe).  All methods fail.  My computer is a new Dell Inspiron (Intel i5-4440 @ 3.1GHz, 8GB RAM, 64-bit OS).  The printer I am installing for is a HP 6310, which is old but which has worked well for years under Windows XP.  I don't think the printer is an issue since the installer never reaches the point of scanning for hardware.
    Symptoms:
    Installing using the downloaded installer, the initial splash screen displays.  Selecting "Install" displays a second screen with several progress indicators beginning with "Checking system...".  After checking for a few seconds, an error box pops up complaining that it can't find a file named "hpzpnp.ice_suffix..exe". 
    There are two files in the Setup directory named "hpzpnp01.exe" and "hpzpnp04.exe".  The Autorun file contains many references to an %ICE_SUFFIX% environment variable. 
    I guessed that the installer executables did not have enough privelege to set environment variables, so I went through the installer directories and set all the executables to run with administrator privelege. 
    After that, running "Setup.exe" from the top of the install tree, the initial splash appears, followed by the second "checking system..." progress display.  Then a new window with advice about keeping firewalls turned on, etc. pops up.  Continuing from that point pops up a new error box saying:
    "The specified path is too long C:\Program Files (sLar dig mer med hjalp av en demo pa skarmenHitta enkelt dina foton med onskad metod-Datum, Markning, Mappar, Sok, Favoriter)\HP\."
    I have done this multiple times, and the parenthesized phrase (Swedish?) is sometimes different, but always wrong.  It looks to me as though the installer is trying to decide whether to install 32- or 64-bit drivers, but can't decide which.  It fails to initialize a string variable and concatenates garbage onto the "C:\Program Files" path string.
    I have also seen an error box with the following error near this point:
    "C:\Users\Sid\AppData\Local\7zS4689\Setup\hpzrein01.exe" "-wStub" "3...
    "The parameter is incorrect."
    Clicking OK on the error box aborts the installation.
    Installing using the HP Printer Installation Wizard produces the same error message as the initial attempt with the downloaded installer about missing files with names containing "ice_suffix".
    Installing using the HP Print and Scan Doctor progresses as far as the "path is too long" message.
    I've done this now many times, trying different things, without success.  After each attempt, I run the Uninstall_L4 utility in utils\ccc under the installer tree, then run the OS Disk Cleanup utility.  Following an earlier post, I installed the latest version of Flash Player, with no change in symptoms.
    Any fresh ideas would be much appreciated.

    Hi ehildum,
    Thank you for the time and effort you put into your post. I can see you have done plenty of troubleshooting on your own, but I do have an idea.
    If the USB cable is plugged in this could be causing issue. Assuming it is connected, let's unplug and take a look at the Device manager. The hpzpnp.ice_suffix indicates a plug and play 'pnp'.
    Follow these steps and let me know what happens.
    Click on Start
    Right click on Computer
    Select Manage
    On the left panel, click on Device Manager
    Click on View at the top and select Show hidden devices
    Look in the list for Other devices
    If you see the printer here, right click and select uninstall
    Look in the list and click on the arrow next to Printers
    If you see the printer here, right click and select uninstall
    Delete all files in the %temp% folder
    Restart the computer
    Open the installer from your download  (AIO_CDB_Net_Full_Win_WW_130_141.exe)
    Do Not plug the USB cable in until the software says so.
    Please let me know the outcome of these efforts. If your USB cable was not connected please complete the above steps anyway to see if there is something stuck in the Device manager that could be causing the conflict.
    I look forward to hearing from you.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • There is no  "installation runtime" under Windows- Preferences in Eclipse

    Hi everyone, iam using Eclipse 3.1. Iam using an Application server(JBOSS). In order to add an application server, we will be adding it under Windows->Preferences->Server. But i dont have the option for "server" in my eclipse. Please give me the solution, if any one knows.

    I thought Servers was part of the WTP( Web Tools Project)? Do you have this installed - it comes integrated with the latter versions of Eclipse...
    m

  • JDK Installation troubleshooting under Windows

    When JDK 1.6 are installed under Windows,
    It do not write the Path of Its compiler files
    in Windows register.
    And programmes like javac.exe cannot be
    invoke in CMD window.
    But some programme of JDK are copyed
    in system32 Windows directory?!!!!
    Interesting solution to invoke
    java.exe and other :-)

    When JDK 1.6 are installed under Windows,
    It do not write the Path of Its compiler files
    in Windows register.
    And programmes like javac.exe cannot be
    invoke in CMD window.Correct, that is by design. You must add the JDK executables to the path if you want to use the shortened command "javac".
    Instruction here:
    http://java.sun.com/docs/books/tutorial/essential/environment/paths.html
    But some programme of JDK are copyed
    in system32 Windows directory?!!!!
    Interesting solution to invoke
    java.exe and other :-)

  • Jre 6u26 installation troubles on Windows 7 64 bit

    I've noticed that in my system was installed jre till update 24 and nothing earlier. So I tried to install new version of jre (6u26) but installation process ends immediatlu after UAC prompt, without any error message. I unistalled every kind of jre I found in my Windows installation but nothing changed. Taking a look to the event monitor, i've found that for every jre installation attempt is registered an Application Error, event ID 1000. Complete text follow:
    Nome dell'applicazione che ha generato l'errore: jre-6u26-windows-i586-s.exe, versione: 6.0.260.3, timestamp: 0x4dc16f4a
    Nome del modulo che ha generato l'errore: unknown, versione: 0.0.0.0, timestamp: 0x00000000
    Codice eccezione: 0xc0000005
    Offset errore 0x04ce7658
    ID processo che ha generato l'errore: 0xe6c
    Ora di avvio dell'applicazione che ha generato l'errore: 0x01cc52ab9124b4df
    Percorso dell'applicazione che ha generato l'errore: C:\jre-6u26-windows-i586-s.exe
    Percorso del modulo che ha generato l'errore: unknown
    ID segnalazione: d26812e9-be9e-11e0-a1cc-00195b0e11fa
    Now my system has no java runtime environment at all, and I don't know how to fix this problem. I also tryed disabling every tsr and service running at startup, but still I'm not able to complete the jre installation.
    What can I do?
    Pietro

    I opened a dos shell with adminstrator rights, typed command you suggested but nothing happened. Neither log file is generated at all, even I i choose a different drive (D: instead C:). In the Event Monitor, under Application section, there is an Application Error Id event 1000 for each installation attempt.

  • IDES 4.7 Installation under Windows 2003 Enterprise Server, Xeon 64 bit

    Dear all,
    we are just trying to install IDES 4.7:
    IDES 4.7 Installation under Windows 2003 Enterprise Server, Xeon 64 bit
    But the installation break with error Message:
    Error 5 (Access is denied.) in excution of a "NetServerGetInfo" function, line (233), with parameter (saptranshost, 101).
    MOS-01224 Failed to add privileges "NetcbPrivilege SeAssignPrimaryTokenPrivile SeIncreaseQuotaPrivilege to account ....." ....
    FJs-00012 Error when excuting script....
    Any experience or help from your side?
    Thanks in advance
    HanseAtik

    Hi. First login in your server with user "sid"adm after go to START --> RUN --> CMD
    adn execute "R3trans -d"  Tell what result .
    About documentation read -->
    service.sap.com/~form/sapnet?_SHORTKEY=00200797470000065912&
    in left corner chek your release like :
    "SAP R/3 Enterprise Core 4.70 / Ext. Set 2.00 (SR1)"
    After read the document for your release, for example if you use the Oracle on WIn and R/3 Enterprise 4.7 x 2.00 SR1 -->
    Inst. Guide - R/3 Enterprise 4.7 x 2.00 SR1 on Win: Oracle 
    Regards.
    Edited by: Sergo Beradze on Mar 21, 2008 10:55 AM

  • Trouble getting the default  user directory under Windows XP

    I m trying to get the default user directory under windows XP SP3.
    To do so, I'm using
    System.getProperty("user.home");
    I was expecting to get a path like "C:\Documents and Settings\user", nstead of that I get "C:\Documents and Settings\user\Destop".
    I checked the %USERPROFILE% and %HOMEPATH% window's environment variables and both of them are correctly set ( set to "C:\Documents and Settings\user").
    Is there any way to get the right path other than using : System.setProperty("user.home", "C:\\Documents and Settings\\user"); ?

    Thanks WalterLaan,
    The System.getenv("USERPROFILE") method will, at least, fix the problem under win XP.
    I guess i'll have to write a more refined method to be able to deploy my application under differents OSes.
    Regards.

  • Oracle 11 under Windows 2008 installation problems

    I cannot make Oracle 11.2.0.1.0 work under Windows 2008. The server's host name is SARABI. Anything of the following takes place on SARABI, no remote access is involved.
    The procedure has been as follows...
    - Windows 2008 was installed
    - Oracle 11.2.0.1.0 was installed
    - listener.ora, sqlnet.ora, tnsnames.ora were modified
    - no other Oracle configuration file was touched
    At this point it worked. I could connect with SQL Plus and with SQL Developer.
    Next the server was rebooted. Without having changed anything at all, connecting was impossible. The message is "12514, TNS, listener does not currently know of service requested in connect descriptor". The three configuration files are given below.
    Currently, all services are running accoording to Windows Control Panel. There are no entries in the eventlog. Executing "TNSPING SARABI" works fine. Executing "LSNRCTL status" shows "The listener does not support any services" (translated from German "Der Listener unterstützt keine Services"), the full output is given below.
    --- LISTENER.ORA ---
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = SARABI)(PORT = 1521))
    ADR_BASE_LISTENER = C:\Programme\Oracle\Admin
    --- SQLNET.ORA ---
    NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
    SQLNET.AUTHENTICATION_SERVICES= (NTS)
    ADR_BASE = C:\Programme\Oracle\Admin\product\11.2.0\dbhome_1\log
    --- TNSNAMES.ORA ---
    SARABI =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = SARABI)(PORT = 1521))
    (CONNECT_DATA =
    (SERVICE_NAME = ORCL)
    --- LSNRCTL status ---
    C:\Users\admin>lsnrctl status
    LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 25-SEP-2010 11:49:24
    Copyright (c) 1991, 2010, Oracle. All rights reserved.
    Anmeldung bei (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
    STATUS des LISTENER
    Alias LISTENER
    Version TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Production
    Startdatum 25-SEP-2010 11:24:54
    Uptime 0 Tage 0 Std. 24 Min. 32 Sek.
    Trace-Ebene off
    Sicherheit ON: Local OS Authentication
    SNMP OFF
    Parameterdatei des Listener C:\Programme\Oracle\Admin\product\11.2.0\dbhome_1\network\admin\listener.ora
    Log-Datei des Listener c:\programme\oracle\admin\diag\tnslsnr\SARABI\listener\alert\log.xml
    Zusammenfassung Listening-Endpunkte...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SARABI.lionsland.local.de)(PORT=1521)))
    Der Listener unterstützt keine Services
    Der Befehl wurde erfolgreich ausgeführt.
    Michael G. Schneider

    Deleting the three configuration files and recreating them with "Net Manager" gives...
    --- LISTENER.ora ---
    LISTENER =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = SARABI)(PORT = 1521))
    ADR_BASE_LISTENER = C:\Programme\Oracle\Admin\product\11.2.0\dbhome_1\log
    --- SQLNET.ora ---
    NAMES.DIRECTORY_PATH= (TNSNAMES)
    ADR_BASE = C:\Programme\Oracle\Admin\product\11.2.0\dbhome_1\log
    --- TNSNAMES.ora ---
    SARABI =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = SARABI)(PORT = 1521))
    (CONNECT_DATA =
    (SERVICE_NAME = ORCL)
    After rebooting the server, the same problems appear. Executing "sqlplus SYS/**** AS SYSDBA" gives "database not started". Then executing startup gives...
    ORA-00119: invalid specification for system parameter LOCAL_LISTENER
    ORA-00132: syntax error or unresolved network name 'LISTENER_ORCL'
    Michael G. Schneider

  • Crashes every time I exit, even using exit under file tab, has trouble recovering windows and tabs, reset crashes.

    Whenever I start Firefox I get an error message that it has trouble recovering windows and tabs and gives me an option to close the windows displayed or restore the last window. It does this each time regardless of the last window. Each time I exit it crashes and I send a crash report. I tried a reset and it crashes. I have done complete virus and malware scans and have found nothing.

    Please perform the following steps to give us a crash report ID that helps us find out more about the cause of the crash.
    #Enter about:crashes in the Firefox location bar (that's where you enter your website names) and press Enter. You should now see a list of submitted crash reports.
    #Copy the most recent 5 report IDs that you see in the crash report window and paste them into your forum response.
    More information and further troubleshooting steps can be found in the [[Firefox crashes]] article.

  • USB SB Audigy 2 NX (SB0300) on Windows 7 multiple problems

    Hi there,
    as the Topic states i have a lot of trouble installing my USB Soundcard under the newly installed Windows 7 [driver, headphones, general sound bass redirection etc.]
    Here is what i already tried and (kind of) worked or not..
    . Original, official Drivers from Creative Download Page:
    Only Vista-Driver available, can't be installed ..
    2. Tryed to download beta drivers from the support page:
    http://support.creative.com/kb/showarticle.aspx?sid=605
    http://support.creative.com/Downloads/searchdownloads.aspx?filename=USB_PCDRVBETA_US__0_ 0097.exe
    But as you can see there is no driver at all..
    3. Tryed to install the original software from the years old Driver-CD
    did not work at all
    4. Found in a Forum a link to this beta driver:
    http://files2.europe.creative.com/manualdn/Drivers/AVP/50/0x43FDFCA/USB_PCDRVBETA_US__0_0098.exe
    installed and working. BUT!
    Nothing is really working at all - sure now there's sound coming out of some of my 5. speakers but:
    - there is no bass redirection available - the sub remains silent.
    - i can't switch to headphonesmode (has an own plug), speakers still running
    - there are no Speakersettings, i can't change speakervolumes
    Fun Fact:
    - If i unplug the sub chinch from the sub/centre cable coming from the USB card, the sub kind of starts working (sounds inaccurat and washy)
    I tried to install the speakersetup individualy, not working at all. (someone in some forum somewhere suggested this)
    http://files2.europe.creative.com/manualdn/Applications/AVP/055/0xB3F7BC78/CSL_PCAPP_LB_2_40_09.exe
    5. Newer Version of the beta driver found:
    http://support.creative.com/downloads/download.aspx?nDownloadId=263
    exactly the same **bleep** as with the 098 Version ..
    6. Found out about the Daniel K Drivers and dlt the 3.8 Audigy Support Pack
    Unable to install, the setup is telling me that it's not able to find a installable device ..
    Now i'm completly running out of ideas ..
    Is there any way to install my SB0300 and make it work as it did under windows XP ?
    I'm REALLY looking forward to your suggestions!
    Sincerly T4b

    Jurel,
    Which games in particular are giving you these problems? Also are you using XP SP2? Make sure you have the latest updates for Windows as that might help also. Do you get the stutter in places other than games?
    Jeremy

  • MBP 17" freezes once in a while under Windows 7 64b

    Hi,
    CONTEXT
    I have purchased a MBP 17" a month ago and installed successfully Windows 7 64 bits & all MBP drivers through Boot Camp.
    ISSUE
    However, once in a while (let's say once every 4 sessions), my laptop just freezes: it can be at start up (before logon screen), or when I'm
    working under Windows. There is no way to anticipate this freeze: it just happens.
    ANALYSIS
    I would assume this is caused by my graphics card (?)
    By the way, under Windows 7 Control Panel > Maintenance Center (*), I found a generic warning (twice) about an error on my video card
    (*) Sample screenshot (not mine): http://www.notebooks.com/wp-content/uploads/2009/12/MaintenanceChevron.jpg
    Would anyone have an idea what I should do here? Is the BootCamp NVIDIA driver outdated? Is there any risk to download & install a new driver from the NVIDIA website?
    FYI I've browsed previous topics, and couldn't find relevant fix for it.
    Many thanks for your help!
    Regards,
    Nicolas
    CONFIGURATION
    Default OS (450Go partition): Windows Seven 64 bits with BootCamp
    Native OS (50Go partition): Mac OS X version 10.6 Snow Leopard
    Graphics: NVIDIA GeForce GT 330M et Intel HD
    Chip: Intel Core i5, 2,53 GHz
    BootCamp: 3.1

    Hi PSolt,
    Thanks for your feedback.
    Actually I've applied a fix found in a different post (see below).
    I will now "test" it for a few days to check if it definitely fixes my issue, and will then update this post.
    Post: http://discussions.apple.com/thread.jspa?threadID=2507994&tstart=0
    Solution suggested by opus131:
    1. Go to the nVidia driver download page: http://www.nvidia.com/Download/index.aspx?lang=en-us
    2. Go for "Option1: Manually find drivers for my NVIDIA products."
    Product Type: GeForce
    Product Series: GeForce 300M Series (Notebook)
    Product: GeForce GTS 360M
    Operating System: Your OS (I used Windows 7 64-bit)
    Language: Your Language (I used US)
    3. Download the driver. At the time of writing this, the current version was 260.89, the filename of the download was 260.89notebook_winvista_win7_64bit_internationalwhql.exe
    4. Start the installation and made sure to check the "clean install" option. The installation should go through without any trouble.
    Thanks!

  • Premiere Elements 8 under Windows 7: HOW TO DO?

    My system is a MICROSTAR (MEDION) Quadcore 6600(think it's made by MSI) with 4GB memory, 2 x 1TB HD Wetern Digital GREEN (replacing the very poor quality Seagates 2 x 500Gig originaly installed) and running Windows 7 64 and 32 Ultimate. The 32 version was installed especially for PE8
    Why I didn't stay with PE7?
    Strange enough, PE7 worked perfectly under Windows 7 64bit RC and RTM, but with the Official release of Windows 7 32 or 64 Ultimate, it was finished with the Happy Hour, Crash, crash, crash all the time!
    So I downloaded from Adobe a official PE8 and started very happily with it.
    But it was CRASH & GO all the way !!!
    I have send a few messages to Adobe Contact, which deviated me to this forum so I could spit my poison far from their "Ivory Tower" No answers or help from them. PE8 is paid, so go to ...
    I found out immediately that I was one of the many people to regret this "Buy of the Year", but since PE7 didn't work and Windows 7 is so good that I don't want to go back to XP or Vista, I had to find a way to make this SH.. work. Luckily the Forum proposed me a few solutions for which I am very grateful.
    After a few editing's with DV (about 3hours long), I am having a little bit more experience with this PE8-pre-beta-thing.
    First of all I disabled the GPU-thing in the preferences, then I disabled the "Background rendering".
    The  Medion computer has a "diet" Nvidia Geforce 8600 so there are no 3D drivers to disable, neither has Windows 7 this Windows Defender, so that could also not be the problem.
    Anyhow, these few minor changes seem to have solved a lot of crash problems.
    Also, NEVER open a PE7 project in PE8 !!!!! It's really not 100% compatible: no way to render previews and crashes guarantied!
    Be very careful in applying transitions and video effects, especially if you start cumulating them. Maybe they will work in preview, but you never know if you will be able to render a film or DVD from it.
    For example "camera view" + "Soft edge" ( since I have a Dutch version, I don't know if these are the right names) to make a kind of 3D frame around your image. No problem in PE7, but PE8 doesn't digest it! The only way to render this to a film is to import the project in to PrProCS4 and change the other transitions which are not supported by PrPro with similar ones. Or going from New York to Chicago over Mexico City!!
    If you take care of these precautions you can work very satisfactory with PE8, without crashing more then was the case with PE7 (low memory problems)
    This PE8 should have been written for 64 bit, so it would have suffered much less memory problems, then now.
    Some things I like better with PE8, like the ClipArt's, the Menu's and the new Smartmovie themes, which I create and then edit manually.
    Automatic backup creates now 5 instead of one file.
    What I don't like:
    If you capture in scenes, it's still scene 11 coming after scene 109 etc, instead of counting from 001.
    With PE7, you could see in which map the project you wanted to open was situated, here not.
    Place of the Project changed, without reason, change for the fun of change?
    Making "markers" has become more complicated, without improving. Also changed just for the fun of it?
    Can still not capture HDV by scenes, for that I have to use Sony Vegas.
    Until now I didn't try to edit HDV in PE8, because I don't trust PE8.
    What we really need is for Adobe to bring a major update to fix al these annoying misfits and to make a customer's dialog instead of a one way street policy.
    If I find new ways to make work easier and without crashing I will not hesitate to let you know.
    Until then, hope this can help you a little bit!
    Roald

    NO, YOU CANNOT !!!!
    If your project was started in PE7  and you import that project to PE8, you cannot, I REPEAT, you CANNOT render this files to a preview.
    You wil get the render window, but no counter or anything else will move or happen.
    Nothing, rien , nada, niets, nichts!!!!!!
    At least not here on neither of the 3 installations which I did under 3 different Windows 7 !!!!

  • N1 SPS 6.0 Installation problem on windows 2003

    Hello,
    I have tried to install N1 SPS 6.0 on windows 2003. I was able to finish installlation successfully. But When I try to access tool from http://localhost:8080 , It is not working. I am new to tool , I am installing first time so not able to figure out. I have checked the service for master server is starting under windows services. What else do I need to check? Are there any prerequisite to install N1 SPS 6.0 Master Server on windows?
    Thanks. Any help will be appreciated.
    Thanks
    Bhavika

    1. While installation did you configured http or https for UI ? I configured http
    2. If https, did you provided the keystore file as part of installation or not? No
    3. If https and opted to provide the keystore file after the installation? No
    4. if you run 'netstat -an | more' can you find port 8080 in the list? I cannot see
    5. are you finding any error messages in {install-dir}\server\bin\cr_server.out file? if so, can you share that error message
    I cannot see cr_server.out file under C:\Program Files\N1 Service Provisioning System\6.0\server\bin that is my install directory
    6. Related to N1 SPS, are you finding any errors in windows event log? if so, can you share the error message
    7. From DOS command prompt, when you run "net start crserver60" or "net start postmaster60" or "net start crprepdb60" are you getting the following error? *
    The requested service has already been started.
    I see following message
    C:\Documents and Settings\Administrator>net start crserver60
    The N1 Service Provisioning System 6.0 Server service is starting.
    The N1 Service Provisioning System 6.0 Server service was started successfully.
    8. Do you have the local user postgres in your system What do u mean by local user ? I have installed postgres on my system with postgres user.
    9. instead of using "http://localhost:8080", if you try to access the UI admin through "http://{windows-host-name}:8080", does it work? * I tried both way , it does not work *

  • Creative Audigy Platinum Installation Help with Pentium 4 3.2GHz HT Enab

    :mansad:
    Dear Fellows,I have recently upgraded to a new Pentium 4 machine. The config is as follows:Pentium 4 3.2eGHz MB cache HT (Hyper-Threading Enabled)Intel Original 865GBF MainboardGB Kingston DDR 400MHz RAM20GB SATA WD HDDSound Blaster Audigy PlatinumATI RADEON 8500 DV 64MBThe problem I am facing is with Audigy Platinum. Once I install the operating system (Win XP) and move to the installation of Creative Audigy Platinum Sound card. All the applications are installed and the system hangs while updating *drivers*. I restarted but it corrupts the whole operating system conflicting with Display Driver, Mainboard driver as well as Windows. CD/DVD Rom also disappear. I then reinstalled operating system again. I would like to request for help and solving this issue and I dont want to get rid of Creative Audigy. I have heard complaints with Hyper-threading technology but I disabled it and the same problem occured. I tried everything e.g. latest drivers from Creative website, BIOS updates, Driver updates etc etc. The problem starts once the drivers are to be updated for Creative Audigy Platinum.Anticipating your response soon.Regards,

    Hi Jeremy,
    I would like to thank you for your kind assistance with my problem.
    Heres the good news, I finally managed to install and run my Creative Audigy Platinum perfectly.
    Credit goes to your assitance and support.
    For your info, I would like you to know what I really did.
    I have an Intel Genuine 865GBF mainboard. I installed clean copy of Windows XP (SP) and downloaded and installed latest Chipset INF utility from Intel website. I guess this utility tells the mainboard what kind of hardware is configured on the board.
    Please note that I did not add any PCI card except the AGP graphics card.
    After finishing Windows XP, I installed the Creative Audigy Card in a different PCI slot. When windows started, it detected the sound card installed.
    I simply ran the driver and programs from the Creative CD and it installed perfectly. I then updated the drivers downloaded from the Sound Blaster site in correct order.
    After finishing with Creative Audigy Platinum installation. I installed other hardware devices, service packs, AV and applications.
    Its the third day and everything is running well.
    I just wrote the steps if someone else faces the same problem, he/she can sort it out the same way.
    Thanks again for your help.
    Best regards,

Maybe you are looking for