Sounblaster live value 5.1 digital freezes sys

Hey, I am having trouble with my sounblaster li've value 5. digital (model # ct4780), everytime that I try to install it, my system will boot ok, windows will recognize the hardware and then everything will freeze completely. I am sure that it is not a conflict (at least on one of the machines) because it used to work on the one machine (and I have not done any hardware changes). But, I tried switching it to another system and it would just freeze. I tried switching it back and the same thing happens.... Any suggestions other than chucking the thing?

I guess you got what you paid for... reffering to the motherboard
I cannot give you direct links but you can Google for AuzenTech X-Mystique, X-Plosion or for Turtle Beach Montego DDL... You will need a PCI slot thou, and those are not hardware accelerated soundcards (like the most of Creative ones) so they will eat some of CPU usage. How much - depends of your CPU power, of course. Your present card anyway, has no hardware acceleration so is ok I guess...
Another solution would be to add the Creative DTS li've encoder (I don't think is worth the investement for your crappy Li've24bit): http://us.creative.com/products/prod...y=6&product=49
I don't know of any USB solutions for this.
Message Edited by SoNic2367 on 06-07-2006 2:02 AM

Similar Messages

Sounblaster Live! 5.1 Digital SB0

Hi people !
My soundcard is a SB0220 and i see on the internet, people dosen't seem to like it. I have some sound problem in 2 games, Rayman 3 and Toca Race 2, but all other game works fine. I would to know how to see if some new drivers or update comes for this card, i had buy this card in a computer store, and we can see, a lot of computer retailers sell this card, same thing of audigy or others ! :smileyindifferent:
Tanks !

Check the model number from a sticker on Li've! card board so you get the card properly identified (SB022x) --> BadBoy has some Li've! 5. CD's downloadable @ http://badboy.filefront.com/
jutapa

Which shoul i use? realtek alc 650 or sb live value?

yah i haven't found any decent comparisons or reviews that pit these two sound controllers together and i'm hoping that someone could possibly answer this for me . . .
i have the soundblaster live! value card and there's the realtek alc 650 sound controller on my mobo . . . which one of these two do u guys think is better to use?
can someone compare the two? like which one uses more cpu load, sound quality, etc . . .

Yes ... I am having problems having sound in my video capture ... I downloaded the new SB Live drivers for XP and I found the extraction in my one of the local settings folder. I've tried different ways to acquire sound in my video captures.
I switched back to the SB Live Value card a few hours ago.
I've got sound now but kind of hit and miss.
I use a Maxtor ATA 133 card and have four ATA 133 60 GB drives sitting on the bottom of my tower. Plus a 40GB and 60GB mounted normallly. I do use the KT4V-L mobo and the XP 2500-Barton.
HP 9100 cd writer and Sony DRU-500a DVD Burner.
I'm using the LAN on board for DSL.
FANS: One is mounted in back ... I cut the holes out to increase air flow.
Another fan is mounted on side panel ... shooting outside air towards my CPU.
RAM is one stick of Kingston KVR333X64C25/512 DDR Ram
BIOS setting is FSB 166 setting.
System - Mouse hasn't froze up yet ... when it does happen I usually here a small faint sound ... "ping"-"poing" and then the mouse is moves again. Audio and video playback is also affected when this happens.
I've changed my swap file to one of my 60 GB ATA 133 drives only. Setting is 1000 MB and C-Drive is not included.
I'm really frustated with this freezing up problem. I've got too many new parts to figure out what is wrong.
WIN XP - KT4V-L MOBO - and new DDR ram are all installed in same time period.
Any suggestions?? ... Mouse hasn't froze up yet after changing Swap file settings.
Have you been to the Black Viper website ???
What do you mean by "Surround Mixer 2" are you refering to the baby blue mixer I saw a few days ago. I liked the old mixer more.
Quote
Originally posted by Meseriashu
Realtek alc 650 looks impressive - has all the enviroment efects that SB Live! has, six channels output, support for EAX and all. But there is a diference: while your Value SB Live! does have a big support in hardware for them, the realtek onboard sound is very software depending. And the quality of the effects is incomparable. And there are the SoundFonts that you can use. Did you try your SB Live! with the XP drivers (with Surround Mixer 2)?
Someone said about not beeing able to run 3dmark03 sound test with the realtek - right! the SB Live! has 32 hardware voices, can take a much more number of audio inputs (if you have some 5Ghz CPU u can run about 32 winamps at the same time ).
Hmm but you have a VIA... that has problems with SB Live!
I have also, but only in 9x, in XP is working smooth.
About the latency - you can get very close to real time if you install the ASIO drivers but the KK Mixer sucks.
Go Creative ) Still awaiting my Audigy 2 Bulk...

ORA-06502: PL/SQL: numeric or value error ORA-06512: at "SYS.OWA_UTIL"

Was working on tutorial from the:
Oracle Database Express Edition 2 Day Plus Application Express Developer Guide
Working on the section 4: How to Control Form Layout.
Ran into a problem trying to compile the Create HT-EMP Table script.
keep getting this error for this particular segment creating the bu_ht_emp trigger:
pp. 4-2 and 4-3
CREATE OR REPLACE TRIGGER bi_ht_emp
BEFORE INSERT ON ht_emp
FOR EACH ROW
BEGIN
SELECT ht_emp_seq.nextval
INTO :new.emp_id
FROM DUAL;
:new.rec_create_date := SYSDATE;
END;
ORA-06502: PL/SQL: numeric or value error ORA-06512: at "SYS.OWA_UTIL", line 354....etc
I've check the syntax for the entire script and it all checks out. Does anyone have a clue why this is failing?

If I'm looking at the same DDL, not seeing where it would throw an owa_util error, are you running it in the apex script editor?
Just plain sqlplus doesn't like the empty line stuck in with the list of check constraints on the emp_dept column, after fixing that up (and dropping the sequence that got created on the first pass) the DDL and insert runs fine-

ORA-12899: value too large for column "SYS"."SYS_TEMP_0FD9D6677_2AA50E11"."

Oracle Database:11.2.0.1
OS: AIX6.1
The database is getting the below error in alert log.Can anyone tell me what is the cause of these errors and how they can be rectified.
ORA-12899: value too large for column "SYS"."SYS_TEMP_0FD9D6677_2AA50E11"."C1" (actual: 15, maximum: 13)
ORA-12012: error on auto execute of job 724116
ORA-12899: value too large for column "SYS"."SYS_TEMP_0FD9D6677_2AA50E11"."C1" (actual: 15, maximum: 13)
ORA-06512: at "SYS.PRVT_ADVISOR", line 2693
ORA-06512: at "SYS.DBMS_ADVISOR", line 241
ORA-06512: at "SYS.DBMS_SQLTUNE", line 772
ORA-06512: at line 4
Oracle Database:11.2.0.1
OS: AIX6.1

Kuljeet Pal Singh wrote:
ORA-12012: error on auto execute of job 724116
ORA-06512: at "SYS.DBMS_ADVISOR", line 241Appear error is coming from auto task job which is by default running in database from 10PM.
this could be due to bug,check MOS or Raise SR to oracle.I have checked the MOS but did not get any reference to the below error
ORA-12899: value too large for column "SYS"is this cause any harm to my database ?
Edited by: 953053 on Aug 30, 2012 11:36 PM

Rounding a decimal value to 3 digits

I have opened a UDF and copied the value of Total (LC) column in that field. I want to round off the copied value to 2 digits.
Below is the query written to copy the value.
SELECT ($[$38.21.NUMBER] * $[$38.U_GST.1.11]) / 100
Below is the query written to ROUND the value.
SELECT ROUND(($[$38.21.NUMBER] * $[$38.U_GST.1.11]) / 100, 2)
Thanks & Regards,

Try: SELECT ROUND(($[$38.21.NUMBER\] * $[$38.U_GST.NUMBER\]) / 100, 3)
However, I think it is probably not working because B1 has internal checking to make sure the decimal value follow your setting. If you setup your currency by 2 decimals, you may never get any additional decimal place.
Thanks,
Gordon

GDriver of Sound Blaster Live! 5.1 Digital (Model: SB0220) for Windows 7

My Sound Blaster Live! 5. Digital cannot work after Windows 7 is installed. Is driver for Windows 7 available? If not, any alternati'ves? My multimedia speaker is Boston "Digital BA735" which is used to work with the digaital output the this sound card under Windows XP.

Try kxproject site for driver

Drivers needed for Sound Blaster LIVE VALUE - Model 4780

I had to move my SB Live Value card model 4780 S/N 4780210008722, to another computer and require new drivers for the SB card which has a gaming port.
I have a 3.0 gig IBM Think Center box using Windows XP SP2.
I tried the DOWNLOAD area Creative provided but found the information very confusing as to what drivers and patches to download. First it said to download except if I did not have the original installation drivers (which I don't have), but then it says to download the drivers as an upgrade.
Again, they don't address clearly what I should download for a basic installation which includes use of the game port for use with flying type software. I have 2-3 joysticks consoles i'd like to use on my newer computer using the CT 4780 SB card.

Look at your Private Messages on the top of the site.

Trouble with Digital output on Live Value under Windows

I have a soundblaster li've value card in my system using the digital output in win98se and all works fine. I just upgraded to WinXP. The windows drivers worked fine once i switched them to digital output. However, i lost the Creative mixer and wanted it back. I then downloaded your Unipack driver for the Li've card for winXP and lost the digital output even when i toggled to digital output control. I then downloaded the li've value from the Gateway site since they OEM'd the card in my system and the digital is working again. However, they do not provide the Creative mixer. Is there anyway I can get the Creative Mixer to work in XP wiith the li've value card? Thanks
Soundblaster FAQ states:
Some name brand systems shipped with a special Li've! Value card that was made to work with digital speakers. If you system shipped with a Li've! Value and you have digital speakers you will need to use drivers provided by your system manufacturer. If you use the drivers on the Creative website your card will no longer work with your digital speakers.
Boston Acoustic Digital Speakers or Prebuilt System With a Digital Li've! Card
If you have a set of Boston Acoustic digital speakers that came with your system and they are not working with your sound card, make sure you have it connected to the digital out on the card. Also make sure that the digital out is enabled.

I still always get the value 0.0 returned for minA. I
know that the data is being correctly stored because I
have a seperate report frame that displays all values
for all entries.
Any ideas where the flaw is?
Thanks!
Hey, there. It's unlikely that your users are entering negative numbers which are the only numbers that will be less than zero. You need to initialize your minA to be some quite large number.

SoundBlaster Live (value) working properly on XP after having no sound. Digital out

I recently did a reformat and install of everything on my XP pc. I knew that the Sound Blaster Li've would be tricky to get going again, and it was. I installed the most recent drivers from this (Creative) website and it just didnt work. I messed with every setting possible. ?I did a google search and read that many people have the same issue. Looking through some old files that I had, I came across an older Creative SB XP insall. I installed it and it worked instantly after it rebooted after the install. I then selected digital output as that is what I am using. If anybody is interested in trying this (if you have no sound), you can download the file herehttp://www.sharebigfile.com/file/53478/SBLi'veXPDrvUpdate.exe.html?If link doesnt work, see 3rd message. I upped it to another hosting area.?File is just under 0mb. On that page you will see that you need to enter a 3 or so digit code to download it. It's easy to miss so look carefully toward the bottom.
Let me know if this works for you. if it does, please post back here so that others can determine if they need this.?
Message Edited by Slammin2 on 0-07-200708:08 PM

Hey, you think it would be possible to upload that on www.megaupload.com or yousendit.com or any other file hosting site, i keep getting? An error that tells my to reenter the key every i try to grab it :-S

Soundblaster Live Value with Digital Audio Output Card Help

; Hi, I have an?0 yr old?gateway with this sound card system and am trying to play an aftermarket Logitech Z-4 speakers without success. I get nothing. Will this sound card work with these speakers? Should I try to download drivers from Logitech? Changes to Bios? Any help would be appreciated. Thanks, [email protected]

Salut M?lancolie
Donc pour la li've elle fonctionne tr?s bien sous xp j'en ai 2 encore a ce jour
Seul les logiciel fournis avec ne fonctionne plus.
Pour les driver je te conseille de prendre les derniers pour la X-FI , ils regroupe aussi les drivers pour la li've :
http://www.touslesdrivers.com/index.php?v_page=23&v_code=2660
Cepandant il faut qu'une fois t?l?charger tu d?compresse dans un dossier et tu installe manuellement les pilotes par mettre a jour les drivers / choisir moi meme dans une liste, la il te d?tectera la li've et te l'installera, tu reboot et hop
Salut.

SB Live 24Bit External: Reproducible System Freeze after installing Windows Upda

I have a SB Li've! 24Bit External and am quite content with it. However, my Windows Update has recently installed the following updates:
- Cumulati've Security Update for IE, KB9282
- Cumulati've Security update for OE, KB9567
- Tool for Spyware Removal, KB890830
- Security Update for Windows XP, KB90853
- Security Update for Windows XP, KB9562
I suspect one of the last two ones to be at fault. Afterwards, my computer froze completely on the Windows startup screen whenever the SB came up. I could verify that it was the SB by removing the USB cable (which solved the issue) and plugging in again later to the running system (which brough the freeze again).
A was able to get a running system again by using the System Recovery, but I'd *really* like to install those updates (. to be a little more safe and 2. because the Windows Update nagging me about those updates is really annoying).

This has got to be the craziest IRQ table that I have ever seen. Windows will not let me change any of the settings. It doesn't seem kocher, and I am pretty knowlegible from other systems I have set up, but not this one. I have been keeping a few charts to see if anything changes, and these have changed since this morning, though nothing else has been installed. I know they shouldn't share as they do, but it won't let me have control over these. Am I am doing something drastically wrong. On USB is Epson 760, Logi cordless opticle mouse, and MS Internet KB with combo PS2 / USB 2 port hub. I have the mouse plugged into KB. HERE GOES:
IRQ 0 : Sys timer
IRQ 1 : Keyboard
IRQ 2 : Prog Interupt Controller
IRQ 3 : Com 2 (yet I have disabled in bios)
IRQ 4 : ACPI IRQ HOLDER FOR PCI IRQ STEERING
IRQ 4 : STD OPEN HCI USB HOST CONTROLLER
IRQ 5 : ACPI IRQ HOLDER FOR PCI IRQ STEERING
IRQ 5 : NVIDIA USB 2.0 ENHANCED USB CONTROLLER
IRQ 6 : FLOPPY
IRQ 7 : EPSON PRINTER PORT LPT1 (MY HP540 IS HERE)
IRQ 8 : SYS CMOS / RTC
IRQ 9 : SCI IRQ USED BY ACPI BIOS
IRQ 10 : ACPI IRQ HOLDER FOR PCI IRQ STEERING
IRQ 10 : ACPI IRQ HOLDER FOR PCI IRQ STEERING
IRQ 10 : NVIDIA NFORCE MCP NETWORK CONTROLLER
IRQ 10 : NVIDIA NFORCE PCI SYSTEM MANAGEMENT
IRQ 11 : ACPI IRQ HOLDER FOR PCI IRQ STEERING
IRQ 11 : ACPI IRQ HOLDER FOR PCI IRQ STEERING
IRQ 11 : SB LIVE
IRQ 11 : STD OPEN HCI USB HOST CONTROLLER
IRQ 12 : ACPI IRQ HOLDER FOR PCI IRQ STEERING
IRQ 12 : NVIDIA GF4 INTEGRATED GRAPHICS GPU
IRQ 13 : NUMERIC PROCESSOR
IRQ 14 : STD DUAL PCI IDE CONTROLLER
IRQ 14 : PRIMARY IDE CONTROLLER (SING FIFO)
IRQ 15 : STD DUAL PCI IDE CONTROLLER
IRQ 15 : SECONDARY IDE CONTROLLER (SING FIFO)

Does the Weblogic JMS implementation use the Time-To-Live values?

          I am trying to send a message to a Queue with a time-to-live. The only way that
          I can get this to work is by going into the console, and setting a default value
          on either the Queue or the connection factory. But this is not the behavior I
          want. I would like to do this programmatically instead so it can be property
          driven and a Sys Admin can change it easily.
          I downloaded the JMS spec and saw that you are supposed to set the time to live
          when calling the MessageProducer's send message. I did this, but it doesn't work.
          Is anybody else having this problem? Does Weblogic's JMS implementation just
          ignore this value? Or do I have my Queues and other JMS components set up incorrectly?
          P.S. All of my time-to-live overrides are set to -1 in the console, so my time
          to live set in the program should be respected.


          Tom,
          I was able to track it down to a programming error. Thanks for your help.
          Dan
          Tom Barnes <[email protected]> wrote:
          >Hi Daniel,
          >
          >Yes, client-specified message expiration works. I suspect
          >a programming error. First take a look and make sure that you are
          >not making the common mistake of trying to set the value
          >directly on the message, rather than on the producer - as per
          >the JMS spec and JMS javadoc, setting this value directly
          >on message will have no effect as the producer's value
          >will always override it. If this isn't the case,
          >please post your code and I'll take a look.
          >
          >FYI Note that all management fields can be programmatically
          >set as well. Since you want programmatic administrative
          >control, this means that you have the option of
          >programmatically configuring the destination's time-to-live
          >override field if you so wish.
          >
          >Tom
          >
          >Daniel Livesay wrote:
          >
          >> I am trying to send a message to a Queue with a time-to-live. The
          >only way that
          >> I can get this to work is by going into the console, and setting a
          >default value
          >> on either the Queue or the connection factory. But this is not the
          >behavior I
          >> want. I would like to do this programmatically instead so it can be
          >property
          >> driven and a Sys Admin can change it easily.
          >>
          >> I downloaded the JMS spec and saw that you are supposed to set the
          >time to live
          >> when calling the MessageProducer's send message. I did this, but it
          >doesn't work.
          >> Is anybody else having this problem? Does Weblogic's JMS implementation
          >just
          >> ignore this value? Or do I have my Queues and other JMS components
          >set up incorrectly?
          >>
          >> P.S. All of my time-to-live overrides are set to -1 in the console,
          >so my time
          >> to live set in the program should be respected.
          >

How can I use a webcam to feed live values (or even better, an average of said values over time) into a subVI?

The values will be read from a digital measurement device, so there shouldn't be much of a problem in recognizing the fonts, I hope.
Ideally, it'd function like this: Webcam is trained on device, and without interaction from the user, labview processes the current data every 30 seconds, converts it to a string, and averages 30-second values over a period of 5 minutes. The average is then given to a VI that would normally poll the user for a value every 5 minutes. I'm trying to close the loop on a control system, and think this is the best way to do it.

If I understand this correctly, you would like to take a picture of a screen every 30 seconds and read some text on that screen. You can do that using the NI Vision Development Module's Optical Character Recognition function palette. This will allow you to create a set of images of each character that you expect to read. You can then train the software to assositate an image of that character with the actual digital character. In this way, the software will be able to read the text. You can read more about this concept in the NI Vision Concepts Help 2013 manual.
Is there any other way to transfer the information from the first computer to the second computer other than using a camera to read the text off a screen? That seems like a strange way to transfer data, but it's possible that you don't have access to the code on the first computer and you can only access it from the front panel. Is that the situation that you are in?
Take care,
Jeremy P.
Applications Engineer
National Instruments

Black Screen with a live cursor and Please Wait Freeze

So after having my computer remove internet functionality when I did some HP updates I System restored back before them fixing the issue. Now though, it continues to give me Please Wait then freezes for about 6-8 minutes, and it will finally go to the log in screen but after sliding the main image and screen back to get to the log in it gives me Please wait for another 6-8 minutes. Once I get to the log in screen it freezes momentarly and then it allows me to log in. After clicking submit or enter it will freeze on Welcome for a long while, the time is not consistent, and once it gets to the desktop it is black, the pixels are live but just not changing. The cursor is also live and working but there is nothing to click. The windows buttons do not work to get to the tiles with everything on it. I have tried to restart it about 7-8 times but it just continues to freeze. After about 30 minutes of being on black screen the desktop bar loaded but it isn't loading fully. CRT, ALT, DLT, works but Task Manager doesn't load. If I relock it restarts the black screen process. Anyone know how to fix this?

Hi,
Have you tried running a hard drive test on the computer?
To run the Hard drive diagnostics you need to Tap Esc as soon as you Power on the notebook. It'll show you the Startup menu. Select F2 and run hard drive quick test and let me know what happens..
Testing using HP PC Hardware Diagnostics : Testing using HP PC Hardware Diagnostics (UEFI)
Note:
If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
Although I am an HP employee, I am speaking for myself and not for HP.
**Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

Sounblaster live value 5.1 digital freezes sys

Similar Messages

Maybe you are looking for