Sound after render

I've tried rendering several times, with video shot from my iPhone, along with a few animated clips and imported music besides the music which is only a minute long, there is only the sound from the video(which is needed). The problem comes after rendering when I try to play the video back. The sound is out of sync and choppy through out the video. I've turn on the audio I even tried to expose the audio files before rendering. Any help at all is appreciated, the video is 12 minutes long and this is my 5th time rendering it.

If you are having trouble rendering then first - read the help files on Rendering. Follow the advice given in the help files for the kind of file you want to export. Since you are combining audio from different tracks you should also read the help files on working with audio. You'll find the index to After Effects Help here.
If you are a complete beginner then read the getting started with After Effects information available on the home page of this forum. Using After Effects is a lot like flying an airplane. Without taking the time to get some instruction and do some studying you are destined to do things wrong the first time and end up in trouble.
If none of this works you'll have to give us the info that Mylenium asked for because there are probably a billion ways to set up a project and at least a million ways to do it incorrectly.

Similar Messages

No sound after upgrading to Windows 7 M55-S3293

I upgraded to Windows 7 and installed the drivers from Toshiba for my sound card and before installing checked the windows XP box under the compatibility tab. No sound. I did windows update for this driver and it installed an updated driver. No sound. I went to Realtek and installed the windows 7 generic driver for this sound card (thats all manufacturer's offer is a generic driver) and LOW sound. Now I rebooted and back to No sound.
Before windows 7 sound, after no sound.
Toshiba put out a fix for a contextant audio driver for the low sound problem to be corrected with windows 7 but I cannot find anything for my computer.
I don't know know what to do! I don't want to go back to using XP but sound is REALLY important. I would think this is an integrated sound card (Toshiba isn't making service manuals public anymore, it was there the other day and gone today) so I cannot remove it. I don't think I have any available PCI slots to install a new one internally and I don't want extrenal speakers since I do a lot of traveling.
Is there a fix I don't know about? What can I do? Please HELP!!!

Hi Ryan,
Go here: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/downloadDetail.jsp?soid=1671893&pf=true
and download the software called "Sound Utility to Turn Mute Off After Upgrading to Vista", it is made for people that upgrade to VISTA, however, once you have all your Toshiba updates installed by downloading the Toshiba updates, then apply this update to your Windows7 system and the problem will resolve.
I don't know why they did not make this update part of the Toshiba Update Package.
I hope this helps,
best,
Alejandro

HT4623 My iPad 3 has lost the speaker sound after updating to iOS 6.1, headphones are working fine

My iPad 3 has lost the speaker sound after updating to iOS 6.1, headphones are working fine. Please help me out, done all the troubleshooting like restarting, side switcing, cleeaning the headphone jack etc.,

Hi I also have this problem. Sound was only working on the headphones and also on the volume slider in the settings app. Everywhere else I get no sound and no volume slider. Now the headphones don't work either.
(I'm using an ipad 2 iOS 6.1.2)
And NO it's not muted. I've reset all settings and restarted the iPad. Been searching forums for a couple days. Some say its a dirty docking port problem, others suggest a Skype or other app update that could be the problem.
No volume control icon appears when I press the volume control buttons. Only says sound effects, if it says anything at all. Most often there is NO volume icon. YouTube, video, music, and other game apps, no sound.

File size extremely high for .avi after render PE 9

I'm very new to PE and have tried to learn quick to redact info (faces etc) in .avi files for a government agency. I was able to open the file (in the trial version) and make the track matte by dragging the original file to the timeline then dragging it again to the video 2 timeline for the top layer, Question 1) is this the same as copy and paste or am I doubling the size already? Anyway, I was able to get the matte and everything done. Now, to Render and save... I choose computer/avi again (I need to keep it the same) and it took 1 hr 45 min to render it, that seemed long to me but maybe not... but mainly the file size was then 100,883 kb! Starting with a 29.7 kb file. This is what my question is about....could this be right? I can't use it if this is what I get. So, here are the particulars as I got G-spot and looked it up, as per serveral suggestions I saw here. I'm trying to understand the CODEC info but I fear I have a ways to go before I can figure out what I did wrong. (This is my test computer, the future work would be done on a newer, better computer). The videos I would be working with come from various sources and will vary in length but will probably all be a kind of avi.
Intel Pentium processor 1600 mhz
221 mhz, 2.00 gb ram
Microsoft windows xp sp3
video:
length: 0:27.261
frms: 817
Kbps: 28770
pic: 720x480
codec: dvsd dvc/dy
I appreciate any help you can give

Thanks for you response and the information was very helpful. I was able to choose and output that gave me a good file size and I do want DV-AVI (I don't remember what I chose but it worked) but, I don't see an option for DV-AVI - is that a general DV output selection, because there seem to be numerous (AVCHD, NTSC, DV STANDARD) acronyms (I have tried to understand what each is) which do I want?
From: Bill Hunt <[email protected]>
To: Mid Century Modern <[email protected]>
Sent: Wednesday, September 28, 2011 6:07 PM
Subject: File size extremely high for .avi after render PE 9
Re: File size extremely high for .avi after render PE 9 created by Bill Hunt in Premiere Elements - View the full discussion
For the use of Track Matte Keying, with say a Gaussian Blur, or maybe Moasic Effect, if you have not altered the In & Out Points, then just dragging the Asset to both Video 1 and Video 2 will work fine. If you HAVE adjusted the In & Out Points, you can just click-drag from the Source Monitor, where you set those In & Out Points, and all is good. The Copy/Paste is just another way to do it.
As you are doing an "overlay," the output File Size will not be affected in any way. You are also limiting the Blur, or Effect on Video 2 to just the area "exposed" by the Track Matte, so the pixel count will not be altered.
As Steve points out, the output CODEC in the AVI will determine the output File Size. File Size is basically determined by the Timeline's Duration and by the Bit-Rate of the output file. With DV-AVI, that Bit-Rate is pretty well set, and your Timeline determines the Duration. At ~ 13GB/hour, a DV-AVI will be pretty large, but that is the nature of the beast. Also, and as Steve points out, if you are going to do additional editing, and will be Importing that file into a New Project, DV-AVI is about as good, as it gets.
Good luck,
Hunt
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3943683#3943683
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3943683#3943683. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Poor sound after updating to ISO 7

Poor sound after updating to ISO 7. Before updating i had terrific sound both on my music and videos I recorded with my cam, i had to turn it down. Now, after update, i put volym on Max and can hardly hear the music or whatever. Anyone else with same problem?

I also loved my iphone because it HAD great sound. Since the update of the iso7 for my iphone 4s, i am missing my calls because I cannot hear the phone ringing. The sound is so low even though I have it on the highest sound possible. The is something in the update that caused this problem among others such as the phone blinking out while I am viewing videos. Help Apple! THe battery is going from 100 percent to 20 percent in two hours even when I have almost turned off everything on my iphone. I need my sound back! Apple please find out what happened in your update that caused the loss of the sound!

Lost ipad sound after upgrading to ios7

As soon as I click the iOS7 upgrade my ipad volume is gone

First thing to try if you have no sound at all, even in the Music App, try rebooting the iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If you lost sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the control center. Swipe up from the bottom of the screen to get to control center . Tap on the bell icon and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085
Still no luck - try cleaning the dock connector opening of the iPad with a soft brush and just a little bit of rubbing alcohol.
If that fails, then try resetting all settings. Settings>General>Reset>Reset all settings. No data will be lost but all device settings have to be entered again.
Should you still have no sound after trying all of these steps, restoring the iOS software would be the next thing to try.

Mac mail makes no sound after sleeping

Why does Mac Mail stops making the new mail alert sound after falling asleep? How can I solve this?
I have to close mail, wait a few seconds, then reopen to restore the sound. Very annoying.

Reset The Pram
http://support.apple.com/kb/ht1379
(Try several attempts to get the corect sequence)
Reset the SMC
http://support.apple.com/kb/ht3964

Why my iPad mini 2 no sound after updated to iOS8

Why my iPad mini with retina display no sound after updated to iOS8

I solved for my ipad mini retina:
- Go to Settings->General
- Change the function of the slider on the side of the ipad from 'rotation lock' to 'sound off'
- Wiggle the slider up and down
- Sound is restored
- You can set the slider back to rotation lock again

Garbled sound after upgrade to ios7.0.6 for ipad

pls advise if you experienced garbled sound after upgrade to ios7.0.6 for ipad2. thanks

Try reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings for Wi-Fi, FaceTime, Message, Home Sharing will be reset

Greenish tinge, added after render..

I have a problem with a greenish color shift that takes place after render in color 1.0.1
my material was actuall digitized on a G5 with blackmagic decklink,
then media manag'ed' to apple uncompressed 8 bit 422 on an external drive
then copied to my mac pro, where I have an 8core 3.0, 4Gb, ATI X1900. and AJA Kona LHe with latest drivers...
what is going on?
why is the image different before and after render?
I work in PAL, and the material imported into color was Apple Uncompressed 422 8bit codec... and rendered out as the same 422 8bit uncompressed...
unfortunately I do not have a digibeta deck to capture material directly so I have to rely on capturing at another facility...
regards to all,
Elias.
Message was edited by: Elias H

Many many years ago I faced this problem when translating RGB/YUV back and forth in 8-bit files.
Try to use 10-bit files instead and make shure to render in color (internal pixel) using 10-bit at least.
Hope it helps.

Images that zoom and move jitter after render.

I have a bunch of pictures that I put to music. Some move across the screen or zoom slowly. The images move smoothly until I render them, then it's like the images are on some bumpy path or something. They jitter or bump as they move.
I have de-interlaced the images, have changed the image formats, added max flicker filter, ensured that my render settings were at 100%, have redone the motion, have doubled the resolution of the image file (just in case the pixels were conflicting or having trouble at that resolution), and have adjusted settings in the individual item's properties.
My project was supposed to be delivered to the customer yesterday, but there's no way I'm going to deliver a jittery video. The problem is also equally noticeable on the DVD I produced . I have never had this problem in the past. Like I say, when the render bar is green, everything is smooth. After render, bumpy motion. All the motion (for the most part) is perfectly horizontal or vertical.
Any input would be greatly appreciated.
Message was edited by: Joey Delli Gatti

I had the exact same problem and was able to overcome it using a hack... this seems to be a bug in FCE.
I fixed it by rotating all my original images 90 degrees, replacing them in the timeline, rotating them back, then applying the zoom effects. They look perfect now. (Strange but true.)
Anyone with a better solution to this issue?

CC 2014 trial. MPEG MOVIE clips flickering on my time line! after render, and after export. tried all kinds of sequence settings,taking out transitions and effects ,even the audio tracks.....still flickering. They play fine outa the project files!? HELLL

CC 2014 trial. MPEG MOVIE clips flickering on my time line! after render, and after export. tried all kinds of sequence settings,taking out transitions and effects ,even the audio tracks.....still flickering. They play fine outa the project files!? HELLLLLPPPPP!!!!

We can not see your computer, your settings or even know what your source files are because we are not in the same room as you are!
We cant see what you are doing wrong ...so you will have to tell us a lot more and show us some screen grabs of your settings.

No sound after OSX 10.6.8 upgrade

No sound after OSX 10.6.8 upgrade

Go step by step and test.
1. System Preference > Sound > Output > Internal Speakers
    Highlight Internal Speakers / Headphones
    Make sure that Mute is not enabled.
2.Plug in and remove the headphone.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
3. Reset PRAM. http://support.apple.com/kb/PH4405
4. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
5. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
    Side Bar
    Click the Built-in Output.
    Under Mute any of the boxes checked? If so, uncheck it.

How to prevent key sound after pressing Enter

I don't want to hear "beep" sound after pressing enter in TextBox object.
Is it possible to prevent this?
Private Sub TextBox1_KeyPress(ByVal sender As System.Object, ByVal e As System.Windows.Forms.KeyPressEventArgs) Handles TextBox1.KeyPress
If e.KeyChar = Convert.ToChar(13) Then
MsgBox("You will hear "beep" after you press it")
End If
End Sub

Hi,
I am guessing this is a single line TextBox. You can use the KeyDown event to detect the Enter key being pressed and Suppress the Key. If you are using the Enter Key to do something when it is pressed in the TextBox then put it in here
instead of the KeyPress event.
Private Sub TextBox1_KeyDown(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyEventArgs) Handles TextBox1.KeyDown
If e.KeyCode = Keys.Enter Then
e.SuppressKeyPress = True
'Do something here if you need to when Enter is pressed
End If
End Sub
If you say it can`t be done then i`ll try it

How to resume sound after stopping !!

hi,
hoping to fine an answer of how to resume the sound after
stoping
for example, when i'm using stopAllsounds(); AS
now sounds stopped
and i wanna play it again and resume
!!!

that's not the best way to use sound in flash.
it's more flexible and there are less complications if you
remove that sound from the timeline, right click on it in the
library, click linkage and assign it a linkage id. then create a
sound instance:
var s:Sound = new Sound(this);
s.attachSound("yourlinkageid");
// you can then use:
s.start(); // to start your sound
s.stop(); // to stop your sound
// and, in fact, you can use all the sound methods and
properties. check the flash help files.

Sound after render

Similar Messages

Maybe you are looking for