Sound / alsa problem
See this start up message:
Sound server informational message:
Error while initializing the sound driver:
device /dev/dsp can't be opened (Permission denied)
The sound server will continue, using the null output device. "
I could not install alsa.
http://bbs.archlinux.org/viewtopic.php?t=28412
Does it work as root? If it does, you need to add yourself to the 'audio' group. In /etc/passwd, add your username to the line with the audio group. Then run `id <username>` and check. If you are all set, it should work.
Similar Messages
-
Im using the 2.6 kernel and I followed the wiki Alsa install guide, but i cannot get any sound to play, even as root. XMMS doesnt give any errors and appears to be playing, but no sound comes out. There are also no errors listed on startup. I am new to arch and pretty new to linux as well so any help with this problem would be appreciated.
Thanks in advance, Mikewhen i try to play a wav file with aplay it returns
aplay: test_wavefile:686: can't play not PCM-coded WAVE-files
any idea what this could mean?
the output of lsmod is
Module Size Used by
snd_pcm_oss 51748 0
snd_mixer_oss 18304 1 snd_pcm_oss
snd_intel8x0 31912 1
snd_ac97_codec 63364 1 snd_intel8x0
snd_pcm 91168 2 snd_pcm_oss,snd_intel8x0
snd_timer 23300 1 snd_pcm
snd_page_alloc 9348 2 snd_intel8x0,snd_pcm
gameport 3968 1 snd_intel8x0
snd_mpu401_uart 7040 1 snd_intel8x0
snd_rawmidi 21408 1 snd_mpu401_uart
snd_seq_device 6920 1 snd_rawmidi
snd 48996 11 snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 8160 1 snd
eepro100 27788 0
mii 4864 1 eepro100
and lspci:
00:1f.5 Multimedia audio controller: Intel Corp. 82801DB AC'97 Audio (rev 01)
Nothing unusual in dmesg
Heres something though, my amixer shows section similar to yours for PCM, lanrat, however it has no section for Sample mixer control 'WAVE'.
Any ideas what I'm doing wrong??
Also i did try unmuting headphone and this didnt change my lack of sound -
Some videos that are taken with my iphone's camera are not making sounds, this problem occured today to all videos i recorded starting from today, please help
It also takes time for the photos to be transferred out of your iPhone and into Photo stream on Apple's iCloud servers.
Note that this can't happen if your iPhone is not connected to a WiFi network:
When you enable My Photo Stream on your devices, all new photos you take or import to those devices will be automatically added to your photo stream.
iOS devices: New photos you take are automatically uploaded to your photo stream when you leave the Camera app and are connected to Wi-Fi. My Photo Stream does not push photos over cellular connections.
Macs: Any new photos you import to iPhoto or Aperture begin uploading automatically when you have a Wi-Fi or Ethernet connection. Or you can change your iPhoto or Aperture preferences so that only photos you manually add to My Photo Stream are uploaded.
PC with iCloud Control Panel 2.0 or later: Open a Windows Explorer window and under Favorites select iCloud Photos if you are using iCloud Control Panel 3.0 (or Photo Stream if you are using 2.0 to 2.1.2). Open My Photo Stream. Click the "Add photos" button. Select the photos to import to My Photo Stream, then click Open.
from here: http://support.apple.com/kb/ht4106 -
I created a solaris zone for my desktop use, but the sound device was not avaialbe. I tried to export it from the global zone:
device
match: /dev/sound/*
then rebooted the zone, login it, found there were several files added in /dev:
lrwxrwxrwx 1 root root 7 Sep 17 14:50 /dev/audio -> sound/0
lrwxrwxrwx 1 root root 10 Sep 17 14:50 /dev/audioctl -> sound/0ctl
crw------- 1 root root 34, 0 Sep 17 14:50 /dev/sound/0
crw------- 1 root root 34, 1 Sep 17 14:50 /dev/sound/0ctlThe problem is: how to change the /dev/sound/* files for all users to read and write, permanently?
I tried the following methods but failed:
1. Change manually these files' mode to a+rw as root. But once I logged out the zone or rebooted the zone, the changes were lost.
2. Create a script in /etc/init.d/ and link it to /etc/rc3.d/ to let it auto execcute when boot, as below:
#!/sbin/sh
/usr/bin/chmod a+rw /dev/sound/*
echo `date '+%D %H:%M:%S' > /var/tmp/enable.audio.log
ls -le /dev/sound/* >> /var/tmp/enable.audio.logthe content of /var/tmp/enable.audio.log is something like:
crw-rw-rw- 1 root root 34, 0 9月 17 14:50:30 2005 /dev/sound/0
crw-rw-rw- 1 root root 34, 1 9月 17 14:50:30 2005 /dev/sound/0ctlBut oddly, the permissions of these files would always be changed back to the original state soon, automatically.
3. I added an entry in /var/spool/cron/crontabs/root to change the permissions every 10 mins, and it did work, strangely. However I think it's not a good method, because I have to wait for 10 minutes before I can login it (if I login the zone before the permissions were changed, the sound device will never work)
Thanks in advance.It's probably /etc/logindevperm that's fighting you. Read the comments in that file, then you can modify /dev/sound in it.
The idea is that only the user logged in on the console would normally have access to the audio device and the frame buffer, so the permissions are reset at login.
If you're having folks login through a separate zone, this changes that assumption.
Darren -
Sound & Bluetooth problems for lenovo G 560
Sound & Bluetooth problems for lenovo G 560-
Speakers create noise when increase the sound or change window.
Bluetooth icon & drivers dissappear after sometime.(Fn + F5 doesn't work)
They appear again after restart.
Warranty Status Lookup
Product ID: Type-Model: Serial number:
59304299 0679-N/A CBxxxxxxxx
Location: Expiration date:
India 2012-08-31
Moderator Note; s/n edited for member's own protectionHi lenovoG60,
Welcome to Lenovo Community!
You may want to try updating all of your machine drivers such as
Lenovo Energy Management (power management)
Bluetooth drivers
Sound card drivers
Chipset drivers
Look for the drivers from our support site.
Best regards,
Cleo
WW Social Media
T61, T410, x240, Z500, Flex 14
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество -
I am hoping that someone out there can help me in a crucial situation.
I am using an Audigy 2 sound card with creative 5. speakers.
I also use Adobe Audition to edit, record sessions for my voice-over jobs.
Recently, I attempted to hook up a web cam so that I could see my grand daughter on the west coast.
After hooking up the web cam, I noticed my home studio environment changed drastically. I began having trouble with recording using my microphone through my Macki mixer. I began hearing a continuous hiss that I had never experienced before.
In fact after uninstalling the web cam, and restarting my computer, I got that horrible blue screen on my computer indicating the world was about to end! Smile
Long story short, I was able to finally get my computer back up, but I continue to experience problems recording "clean' audio".
Three things, after reinstalling Creative from disc several times and restarting my computer I receive a window stating Creative Media Source Detector.....Unable to load needed components....Please reinstall the application"
Also, when trying to test my sound hardware I get a message stating...Direct play voice setup..."an error occurred during direct play voice setup....error code 0x80004005
Last but not least I cannot access the "Creative diagnostic feature on my computer. I only get a small window for this feature that will not open up fully and allow me to run a diagnostic test!
I know this is a lot to absorb, but I cannot get anyone from Creative to address my problems because I am out of warranty and therefore not getting any love from this company.
Need your advice and or guidance on this.
Please respond when time allows.
VoproRe: Audigy 2 sound card problems? use add/remove programs and remove all creative software and drivers, then do the same for your web cam and unplug it
restart your pc
download and install [url="http://downloads.guru3d.com/Guru3D---Driver-Sweeper-%28Setup%29-download-655.html" rel="nofollow">driver sweeper[/url] and use it to clean up any left over creative bits and bobs and restart your pc when it asks you to
now download and install the [url="http://support.creative.com/Products/product_list.aspx?catID=&CatName=Sound+Blaster" rel="nofollow">latest audigy drivers[/url]
once your back in to windows try recording something and see if everything's back to normal
now reinstalling your web cam but don't reinstall using the cd that came with it
find the manufacturer's website and get the latest drivers
install cd's best avoided simply because the software and drivers they contain are typically the initial release versions, and so potentially very old
and i think we can all agree that old, buggy drivers can be a real pain -
Intermittent sound & voice problems
I have been having Intermittent sound & voice problems
During the last week when making receiving the voice and sound from the speaker is distorted on both ends of the conversation
I have to restart the mobile and it works fine for a day or so then starts again
I reset the phone to factory setting and it seems to have no effect
Has anyone else had these problems?http://www.sonymobile.com/global-en/support/contact-us/
Update Service (SUS)
PC Companion (PCC)
Bridge (for Mac)
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994) -
ALSA problem: "Unknown PCM eq"
When attempting to play a sound:
aplay /usr/share/sounds/alsa/Front_Center.wav
I get:
ALSA lib pcm.c:2202:(snd_pcm_open_noupdate) Unknown PCM eq
aplay: main:590: audio open error: No such file or directory
As far as I know, all modules have been properly loaded, and all devices are in place. Does anybody know what's going on, and how I can fix it? I'd like my sound back! This has only happened recently, since a reboot; before which I could play sounds quite happily.
Any advice would be most welcome!
Thanks,
-A.After a reboot funnily enough it worked. I can't remember having installed something special...
-
How I fixed my Toshiba Satellite sound distortion problem
I've been trying to get the garbled sound recording problem fixed on my Satllite L745-S4210 for months. I have been on this forum and other forums. Alot of people have given me their time trying to fix it, but I managed to do it myself. In the Microphone Properties Advanced Section is a box "enable audio enhancements" I unchecked that box and all my recordings are now crystal clear!
Satellite L745-S4210
garbled sound recording ... a box "enable audio enhancements" I unchecked that box and all my recordings are now crystal clear!
Thanks for that contribution.
The box should be labeled "enable garbled recording."
-Jerry -
Fixed my sound crackling problem! Soundblast X-fi Xtrememusic c
I received my Soundblaster X-fi Xtrememusic card yesterday evening and having sound crackling problem. I could hear this crackling sound whenever I play music CD or play Battlefield 2 and it was annoying,? So I searched Google about this and found a thread on this forum about a bunch of people having this same problem. I just thought I should post my problem/solution to see if this fixes for you guys. The issue with my system was because of my wireless Belkin Pre-N desktop card. Here is how I found out:?. Was having crackling problem so I reinstalled Windows XP w/ SP22. After Windows XP installed, the first driver I installed was for?Soundblaster X-fi card3. Tested the sound by playing music CD. Couldn't detect any crackling sound.4. Installed Belkin?wireless?Pre-n desktop card driver and crackling sound returns. >5. Uninstall Belkin driver and turned off computer6. Put in my old D-Link DWL 520 Wireless card and installed driver for it. So far X-fi seems to like D-Link DWL 520 card!?I tested with D-Link DWL 520 by listening to music and downloading 28mb file off Nvidia and no crackling sound! I hope this help for you guys! I love X-fi now... I was about to return it back to Newegg. ?My system spec:Windows XP w/ SP2AMD 64 X2 4400+ (at stock speed)Asus A8N-SLI Premium MB2GB Corsair memory600 Watts Seasonic power supplyEVGA 7800GT SLI2x 250GB Western Digital HD on?NVRAID0?Message Edited by ktun on 02-28-20060:59 AM
Same thing here... X-Fi Titanium Fatalty Champion, P5E3 Deluxe (x38)..using Windows XP SP3
check it out ftp://ftp.int3.ru/X-Fi_Recording_Sample.rar -
i still have a warranty but it will be out in a week. i previously have a sound distortion problem with my mac for months and suddenly it just fix itself. what should i do? i'm worried that it will comeback and i dont have a warranty anymore.
JoBautista,
you still have the option (before your warranty expires) of purchasing an AppleCare Protection Plan, which will provide an additional two years of coverage. Once your warranty expires, you will no longer have the option of purchasing AppleCare. -
[SOLVED]alsa problem after getting USB sound card
so heres what happened. i got new USB headphones. i got them set up as the default alsa sound device but now my problem is that i can only use one audio source at a time (video OR mp3 but not both at the same time...)
my lsusb is
[josh@my-computer ~]$ lsusb
Bus 008 Device 004: ID 043d:0078 Lexmark International, Inc. InkJet Color Printer
Bus 008 Device 002: ID 0609:031d SMK Manufacturing, Inc. eHome Infrared Receiver
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 004: ID 046d:0840 Logitech, Inc. QuickCam Express
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 005: ID 0b38:0003
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 009: ID 093a:2510 Pixart Imaging, Inc. Hama Optical Mouse
Bus 007 Device 008: ID 0d8c:000c C-Media Electronics, Inc. Audio Adapter
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
what do i need to do to be able to use more then 1 sound source? if u need me to post any files let me know which ones and i'll post it. i never had this problem with my on board audio(hda intel)
Last edited by monkeyslayer56 (2010-02-26 13:13:42)i probbaly didn't have to add ALL of that but that was the only help from google i could get that supposedably used virtual surround sound and didn't steal the sound... and ya i read the dmix was supposed to load by default but i guess it wasn't. hopfully i'll get to learn how to configure alsa on my own so i don't have to copy/paste/system specific edit... btw here is my old .asoundrc that wouldn't let more then one divice use it(first on i found that supposedly enabled virtual surround sound)
pcm.!default {
type hw
card 0
ctl.!default {
type hw
card 0
pcm.!surround51 {
type vdownmix
slave.pcm "hw:1,0"
pcm.!surround40 {
type vdownmix
slave.pcm "hw:1,0" -
ALSA: Problem with sound card detection
Hi all...
I have small problem with alsaconf..
alsaconf report:
"No supported PnP or PCI card found"
I have DELL Latitude C500 laptop
Sound card: ESS Maestro3 (This soundcard is supported by ALSA)
Archlinux detect my soundcard correctly:
00:08.0 Multimedia audio controller: Aurora Technologies, Inc. Unknown device 1998 (rev 10)
Subsystem: Dell Unknown device 00b1
Flags: medium devsel, IRQ 4
Memory at 30002000 (32-bit, non-prefetchable) [disabled] [size=256]
Memory at feffe000 (32-bit, non-prefetchable) [disabled] [size=8K]
Capabilities: <access denied>
modprobe snd-maestro3 doesn't work.
(Sorry for my bad english)
Any ideas ?I had installed a new archlinux , and also have this Error.
[root@myhost eric]# alsamixer
ALSA lib control.c:909:(snd_ctl_open_noupdate) Invalid CTL default
alsamixer: function snd_ctl_open failed for default: No such file or directory
[root@myhost eric]# ls /dev/snd
controlC0 pcmC0D0c pcmC0D1c pcmC0D3c pcmC1D0c seq
controlC1 pcmC0D0p pcmC0D2c pcmC0D4p pcmC1D0p timer
[root@myhost eric]# lsmod |grep snd
snd_seq_oss 29312 0
snd_seq_midi_event 6528 1 snd_seq_oss
snd_seq 46672 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 6924 2 snd_seq_oss,snd_seq
snd_pcm_oss 38560 0
snd_mixer_oss 14592 2 snd_pcm_oss
snd_intel8x0 28700 1
snd_intel8x0m 14092 0
snd_ac97_codec 95780 2 snd_intel8x0,snd_intel8x0m
ac97_bus 2432 1 snd_ac97_codec
snd_pcm 69124 4 snd_pcm_oss,snd_intel8x0,snd_intel8x0m,snd_ac97_codec
snd_timer 19204 2 snd_seq,snd_pcm
snd 44644 10 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_intel8x0m,snd_ac97_codec,snd_pcm,snd_timer
soundcore 6496 2 snd
snd_page_alloc 7816 3 snd_intel8x0,snd_intel8x0m,snd_pcm
[root@myhost eric]# /etc/rc.d/alsa restart
:: Saving ALSA Levels [BUSY] ALSA lib control.c:909:(snd_ctl_open_noupdate) Invalid CTL hw:0
/usr/sbin/alsactl: get_controls:533: snd_ctl_open error: No such file or directory
[FAIL]
:: Restoring ALSA Levels [BUSY] ALSA lib control.c:909:(snd_ctl_open_noupdate) Invalid CTL hw:0
/usr/sbin/alsactl: set_controls:1179: snd_ctl_open error: No such file or directory
[FAIL] -
Hello everybody
i have a small problem with alsa sound,
what's the point? When i want to hear sound from laptop output sound doesn't work, when i plug in headphones or different audio hardware sound is working!
what could happend ? meybe somebody has a similar problem ?pogi wrote:When i want to hear sound from laptop output sound doesn't work, when i plug in headphones or different audio hardware sound is working!
Relevant threads:
https://bbs.archlinux.org/viewtopic.php?id=125522
https://bbs.archlinux.org/viewtopic.php?id=133987 -
[solved] No sound, ALSA finds soundcard, pulseaudio does not.
Problem:
pulseaudio can't find my soundcard (or it can't find ALSA, not sure). It falls back to a dummy-output and no input so i can't play sounds or use my mic.
First appeared when:
Installing software updates like a month ago. I ignored it at first in the hopes it will resolve itself with the next update an few dates later. It didn't so far. None of the packets I updated had linux|pulse|alsa|sound|audio in its name. So i guess it just triggered the problem in a indirect way.
What did not help:
Reinstalling packets with pulse|alsa|sound|audio in its name.
Deleting ${HOME}/.pulse* .
Rebooting.
Resetting /etc/pulse/* or /etc/asound.conf to the defaults of the packaes they come with.
Adding or removing my user to the audio group.
Googling. Other threads i this forum.
Additional infos:
(Stuff that was requested from others which had similar problems. No other [solved]-threads were helping me so far.)
/dev/dsp does not exist.
fuser -v /dev/snd/* returns nothing
aplay whatever.wav produces no sound.
aplay -D sysdefault whatever.wav works.
Using Gnome 3 started with gdm.
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC272 Analog [ALC272 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
default
Default ALSA Output (currently PulseAudio Sound Server)
sysdefault:CARD=Intel
HDA Intel, ALC272 Analog
Default Audio Device
front:CARD=Intel,DEV=0
HDA Intel, ALC272 Analog
Front speakers
surround40:CARD=Intel,DEV=0
HDA Intel, ALC272 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=Intel,DEV=0
HDA Intel, ALC272 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Intel,DEV=0
HDA Intel, ALC272 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Intel,DEV=0
HDA Intel, ALC272 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Intel,DEV=0
HDA Intel, ALC272 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
hdmi:CARD=Intel,DEV=0
HDA Intel, HDMI 0
HDMI Audio Output
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.6.7-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Sun Nov 18 10:11:22 CET 2012
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux cryptdevice=/dev/sda7:root root=/dev/mapper/root ro quiet init=/bin/systemd
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000d8000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b76a0fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b76a1000-0x00000000b76a6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b76a7000-0x00000000b77d1fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b77d2000-0x00000000b780efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b780f000-0x00000000b7908fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b7909000-0x00000000b7b0efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b7b0f000-0x00000000b7b18fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b7b19000-0x00000000b7b1efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b7b1f000-0x00000000b7b62fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b7b63000-0x00000000b7b9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b7b9f000-0x00000000b7be4fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b7be5000-0x00000000b7bfefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000b7bff000-0x00000000b7bfffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b7c00000-0x00000000b7dfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b8000000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: Dell Inc. Inspiron 1370/0R8PR3, BIOS A01 09/15/2009
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0xb7c00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DBFFF uncachable
[ 0.000000] DC000-EFFFF write-back
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0B8000000 mask FF8000000 uncachable
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0FFE40000 mask FFFFC0000 write-protect
[ 0.000000] 4 base 0B7E00000 mask FFFE00000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000f6bf0-0x000f6bff] mapped at [ffff8800000f6bf0]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xb7bfffff]
[ 0.000000] [mem 0x00000000-0xb7bfffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0xb7bfffff @ [mem 0x1fffc000-0x1fffffff]
[ 0.000000] RAMDISK: [mem 0x376e2000-0x37b68fff]
[ 0.000000] ACPI: RSDP 00000000000f6b10 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000b7bf7369 00064 (v01 DELL CL09 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000b7be7000 000F4 (v03 TOSCPL CRESTLNE 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 00000000b7be8000 077A9 (v02 Dell CANTIGA 06040000 INTL 20060608)
[ 0.000000] ACPI: FACS 00000000b7b9efc0 00040
[ 0.000000] ACPI: HPET 00000000b7bfed16 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 00000000b7bfed4e 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: OSFR 00000000b7bfed8a 00070 (v01 DELL DELL 06040000 ASL 00000061)
[ 0.000000] ACPI: APIC 00000000b7bfedfa 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000b7bfee62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 00000000b7bfee8a 00176 (v01 DELL CL09 06040000 LTP 00000000)
[ 0.000000] ACPI: SSDT 00000000b7be6000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000000b7bfffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0xb7bfffff]
[ 0.000000] NODE_DATA [mem 0xb7be1000-0xb7be4fff]
[ 0.000000] [ffffea0000000000-ffffea0002dfffff] PMD -> [ffff8800b4000000-ffff8800b6dfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xb76a0fff]
[ 0.000000] node 0: [mem 0xb76a7000-0xb77d1fff]
[ 0.000000] node 0: [mem 0xb780f000-0xb7908fff]
[ 0.000000] node 0: [mem 0xb7b0f000-0xb7b18fff]
[ 0.000000] node 0: [mem 0xb7b1f000-0xb7b62fff]
[ 0.000000] node 0: [mem 0xb7b9f000-0xb7be4fff]
[ 0.000000] node 0: [mem 0xb7bff000-0xb7bfffff]
[ 0.000000] On node 0 totalpages: 751850
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3913 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11696 pages used for memmap
[ 0.000000] DMA32 zone: 736171 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000d8000
[ 0.000000] PM: Registered nosave memory: 00000000000d8000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000b76a1000 - 00000000b76a7000
[ 0.000000] PM: Registered nosave memory: 00000000b77d2000 - 00000000b780f000
[ 0.000000] PM: Registered nosave memory: 00000000b7909000 - 00000000b7b0f000
[ 0.000000] PM: Registered nosave memory: 00000000b7b19000 - 00000000b7b1f000
[ 0.000000] PM: Registered nosave memory: 00000000b7b63000 - 00000000b7b9f000
[ 0.000000] PM: Registered nosave memory: 00000000b7be5000 - 00000000b7bff000
[ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800b7400000 s84608 r8192 d21888 u1048576
[ 0.000000] pcpu-alloc: s84608 r8192 d21888 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 740084
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux cryptdevice=/dev/sda7:root root=/dev/mapper/root ro quiet init=/bin/systemd
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2944188k/3010560k available (4727k kernel code, 3160k absent, 63212k reserved, 4143k data, 772k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:4352 nr_irqs:512 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 12058624 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1296.696 MHz processor
[ 0.003337] Calibrating delay loop (skipped), value calculated using timer frequency.. 2594.45 BogoMIPS (lpj=4322320)
[ 0.003343] pid_max: default: 32768 minimum: 301
[ 0.003400] Security Framework initialized
[ 0.003407] AppArmor: AppArmor disabled by boot time parameter
[ 0.003948] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.006850] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.008132] Mount-cache hash table entries: 256
[ 0.008498] Initializing cgroup subsys cpuacct
[ 0.008503] Initializing cgroup subsys memory
[ 0.008517] Initializing cgroup subsys devices
[ 0.008520] Initializing cgroup subsys freezer
[ 0.008522] Initializing cgroup subsys net_cls
[ 0.008525] Initializing cgroup subsys blkio
[ 0.008570] CPU: Physical Processor ID: 0
[ 0.008572] CPU: Processor Core ID: 0
[ 0.008575] mce: CPU supports 6 MCE banks
[ 0.008587] CPU0: Thermal monitoring enabled (TM2)
[ 0.008592] process: using mwait in idle threads
[ 0.008600] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift is 0xffffffff
[ 0.010851] ACPI: Core revision 20120711
[ 0.016699] ftrace: allocating 18348 entries in 72 pages
[ 0.027201] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061706] smpboot: CPU0: Genuine Intel(R) CPU U7300 @ 1.30GHz stepping 0a
[ 0.063329] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.063329] ... version: 2
[ 0.063329] ... bit width: 40
[ 0.063329] ... generic registers: 2
[ 0.063329] ... value mask: 000000ffffffffff
[ 0.063329] ... max period: 000000007fffffff
[ 0.063329] ... fixed-purpose events: 3
[ 0.063329] ... event mask: 0000000700000003
[ 0.086782] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.100007] smpboot: Booting Node 0, Processors #1 OK
[ 0.113162] Brought up 2 CPUs
[ 0.113162] smpboot: Total of 2 processors activated (5188.90 BogoMIPS)
[ 0.113436] devtmpfs: initialized
[ 0.116686] PM: Registering ACPI NVS region [mem 0xb7b63000-0xb7b9efff] (245760 bytes)
[ 0.121465] NET: Registered protocol family 16
[ 0.121699] ACPI: bus type pci registered
[ 0.121824] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.121828] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.174683] PCI: Using configuration type 1 for base access
[ 0.175619] bio: create slab <bio-0> at 0
[ 0.175619] ACPI: Added _OSI(Module Device)
[ 0.175619] ACPI: Added _OSI(Processor Device)
[ 0.175619] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.175619] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.178073] ACPI: EC: Look up EC in DSDT
[ 0.182902] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.188123] ACPI: SSDT 00000000b7b1aca0 00223 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.188671] ACPI: Dynamic OEM Table Load:
[ 0.188676] ACPI: SSDT (null) 00223 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.188875] ACPI: SSDT 00000000b7b19620 00568 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.189399] ACPI: Dynamic OEM Table Load:
[ 0.189404] ACPI: SSDT (null) 00568 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.189425] ACPI: SSDT 00000000b7b1aa20 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.190407] ACPI: Dynamic OEM Table Load:
[ 0.190412] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.190429] ACPI: SSDT 00000000b7b1af20 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.190693] ACPI: Dynamic OEM Table Load:
[ 0.190698] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.190715] ACPI: Interpreter enabled
[ 0.190715] ACPI: (supports S0 S3 S4 S5)
[ 0.190715] ACPI: Using IOAPIC for interrupt routing
[ 0.323314] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.323314] ACPI: No dock devices found.
[ 0.323314] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.323314] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.323314] PCI host bridge to bus 0000:00
[ 0.323314] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff]
[ 0.323314] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.323314] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.323314] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.323314] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.323314] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.323314] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
[ 0.323314] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
[ 0.323314] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[ 0.323314] DMAR: Forcing write-buffer flush capability
[ 0.323314] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.323314] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[ 0.323314] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.323314] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.323314] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807]
[ 0.323314] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
[ 0.323314] pci 0000:00:02.1: reg 10: [mem 0xf0400000-0xf04fffff 64bit]
[ 0.323314] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.323314] pci 0000:00:1a.0: reg 20: [io 0x1820-0x183f]
[ 0.323314] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.323314] pci 0000:00:1a.1: reg 20: [io 0x1840-0x185f]
[ 0.323314] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.323314] pci 0000:00:1a.2: reg 20: [io 0x1860-0x187f]
[ 0.323314] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.323314] pci 0000:00:1a.7: reg 10: [mem 0xf0804800-0xf0804bff]
[ 0.323314] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.323314] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.323314] pci 0000:00:1b.0: reg 10: [mem 0xf0800000-0xf0803fff 64bit]
[ 0.323314] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.323342] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.323470] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.323513] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[ 0.323640] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.323688] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
[ 0.323816] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.323860] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.323931] pci 0000:00:1d.0: reg 20: [io 0x1880-0x189f]
[ 0.324017] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.324087] pci 0000:00:1d.1: reg 20: [io 0x18a0-0x18bf]
[ 0.324173] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.324243] pci 0000:00:1d.2: reg 20: [io 0x18c0-0x18df]
[ 0.324346] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.324379] pci 0000:00:1d.7: reg 10: [mem 0xf0804c00-0xf0804fff]
[ 0.324516] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.324552] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.324666] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100
[ 0.324866] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[ 0.324900] pci 0000:00:1f.2: reg 10: [io 0x1818-0x181f]
[ 0.324915] pci 0000:00:1f.2: reg 14: [io 0x180c-0x180f]
[ 0.324931] pci 0000:00:1f.2: reg 18: [io 0x1810-0x1817]
[ 0.324946] pci 0000:00:1f.2: reg 1c: [io 0x1808-0x180b]
[ 0.324960] pci 0000:00:1f.2: reg 20: [io 0x18e0-0x18ff]
[ 0.324975] pci 0000:00:1f.2: reg 24: [mem 0xf0804000-0xf08047ff]
[ 0.325062] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.325096] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.325123] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff 64bit]
[ 0.325160] pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f]
[ 0.325277] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-ff]
[ 0.325283] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.325366] pci_bus 0000:08: busn_res: [bus 08] is inserted under [bus 00-ff]
[ 0.325632] pci 0000:08:00.0: [14e4:4315] type 00 class 0x028000
[ 0.325707] pci 0000:08:00.0: reg 10: [mem 0xf0500000-0xf0503fff 64bit]
[ 0.326109] pci 0000:08:00.0: supports D1 D2
[ 0.326112] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
[ 0.326304] pci 0000:00:1c.1: PCI bridge to [bus 08]
[ 0.326314] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.326391] pci_bus 0000:20: busn_res: [bus 20] is inserted under [bus 00-ff]
[ 0.326477] pci 0000:20:00.0: [10ec:8168] type 00 class 0x020000
[ 0.326546] pci 0000:20:00.0: reg 10: [io 0x2000-0x20ff]
[ 0.326670] pci 0000:20:00.0: reg 18: [mem 0xf0904000-0xf0904fff 64bit pref]
[ 0.326745] pci 0000:20:00.0: reg 20: [mem 0xf0900000-0xf0903fff 64bit pref]
[ 0.326794] pci 0000:20:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.327093] pci 0000:20:00.0: supports D1 D2
[ 0.327096] pci 0000:20:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.327302] pci 0000:00:1c.5: PCI bridge to [bus 20]
[ 0.327309] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.327323] pci 0000:00:1c.5: bridge window [mem 0xf0900000-0xf09fffff 64bit pref]
[ 0.327363] pci_bus 0000:26: busn_res: [bus 26] is inserted under [bus 00-ff]
[ 0.327435] pci 0000:00:1e.0: PCI bridge to [bus 26] (subtractive decode)
[ 0.327452] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.327456] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.327460] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.327463] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.327467] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 0.327471] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.327505] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.327638] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.327717] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.327766] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.327824] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 0.327883] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.327886] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.334993] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.335069] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.335141] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.335212] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.335283] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.335355] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[ 0.335424] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.335495] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.336671] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.336689] vgaarb: loaded
[ 0.336691] vgaarb: bridge control possible 0000:00:02.0
[ 0.336769] PCI: Using ACPI for IRQ routing
[ 0.348092] PCI: pci_cache_line_size set to 64 bytes
[ 0.348605] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 0.348608] e820: reserve RAM buffer [mem 0xb76a1000-0xb7ffffff]
[ 0.348614] e820: reserve RAM buffer [mem 0xb77d2000-0xb7ffffff]
[ 0.348619] e820: reserve RAM buffer [mem 0xb7909000-0xb7ffffff]
[ 0.348623] e820: reserve RAM buffer [mem 0xb7b19000-0xb7ffffff]
[ 0.348627] e820: reserve RAM buffer [mem 0xb7b63000-0xb7ffffff]
[ 0.348631] e820: reserve RAM buffer [mem 0xb7be5000-0xb7ffffff]
[ 0.348634] e820: reserve RAM buffer [mem 0xb7c00000-0xb7ffffff]
[ 0.348791] NetLabel: Initializing
[ 0.348794] NetLabel: domain hash size = 128
[ 0.348796] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.348816] NetLabel: unlabeled traffic allowed by default
[ 0.348840] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.348847] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.348855] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.370000] Switching to clocksource hpet
[ 0.381464] pnp: PnP ACPI init
[ 0.381496] ACPI: bus type pnp registered
[ 0.382022] pnp 00:00: [bus 00-ff]
[ 0.382027] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.382031] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.382035] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.382039] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.382042] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.382046] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.382050] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.382053] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.382057] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.382060] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.382064] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.382067] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.382071] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.382075] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.382078] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.382086] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.382089] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.382093] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
[ 0.382097] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.382100] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.382200] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.440057] pnp 00:01: [io 0x0000-0x001f]
[ 0.440061] pnp 00:01: [io 0x0081-0x0091]
[ 0.440065] pnp 00:01: [io 0x0093-0x009f]
[ 0.440068] pnp 00:01: [io 0x00c0-0x00df]
[ 0.440072] pnp 00:01: [dma 4]
[ 0.440121] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.440232] pnp 00:02: [mem 0xfed00000-0xfed003ff]
[ 0.440329] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.440336] system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.440353] pnp 00:03: [io 0x00f0]
[ 0.440369] pnp 00:03: [irq 13]
[ 0.440414] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.440433] pnp 00:04: [io 0x002e-0x002f]
[ 0.440436] pnp 00:04: [io 0x0061]
[ 0.440439] pnp 00:04: [io 0x0063]
[ 0.440443] pnp 00:04: [io 0x0065]
[ 0.440446] pnp 00:04: [io 0x0067]
[ 0.440449] pnp 00:04: [io 0x0070]
[ 0.440452] pnp 00:04: [io 0x0080]
[ 0.440456] pnp 00:04: [io 0x0092]
[ 0.440459] pnp 00:04: [io 0x00b2-0x00b3]
[ 0.440462] pnp 00:04: [io 0x0480-0x048f]
[ 0.440466] pnp 00:04: [io 0xffff]
[ 0.440469] pnp 00:04: [io 0xffff]
[ 0.440472] pnp 00:04: [io 0x0400-0x047f]
[ 0.440475] pnp 00:04: [io 0x1180-0x11ff]
[ 0.440479] pnp 00:04: [io 0xfe00]
[ 0.440482] pnp 00:04: [io 0xff2c-0xff7f]
[ 0.440574] system 00:04: [io 0x0480-0x048f] has been reserved
[ 0.440578] system 00:04: [io 0xffff] has been reserved
[ 0.440583] system 00:04: [io 0xffff] has been reserved
[ 0.440587] system 00:04: [io 0x0400-0x047f] has been reserved
[ 0.440591] system 00:04: [io 0x1180-0x11ff] has been reserved
[ 0.440596] system 00:04: [io 0xfe00] has been reserved
[ 0.440600] system 00:04: [io 0xff2c-0xff7f] has been reserved
[ 0.440606] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.440620] pnp 00:05: [io 0x0070-0x0077]
[ 0.440629] pnp 00:05: [irq 8]
[ 0.440674] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.440691] pnp 00:06: [io 0x0060]
[ 0.440694] pnp 00:06: [io 0x0064]
[ 0.440703] pnp 00:06: [irq 1]
[ 0.440753] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.440772] pnp 00:07: [irq 12]
[ 0.440819] pnp 00:07: Plug and Play ACPI device, IDs DLL0418 PNP0f13 (active)
[ 0.441027] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
[ 0.441031] pnp 00:08: [mem 0xfed10000-0xfed13fff]
[ 0.441034] pnp 00:08: [mem 0xfed18000-0xfed18fff]
[ 0.441038] pnp 00:08: [mem 0xfed19000-0xfed19fff]
[ 0.441041] pnp 00:08: [mem 0xe0000000-0xefffffff]
[ 0.441045] pnp 00:08: [mem 0xfed20000-0xfed3ffff]
[ 0.441048] pnp 00:08: [mem 0xfed45000-0xfed8ffff]
[ 0.441146] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.441151] system 00:08: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.441155] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.441159] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.441164] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.441168] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.441172] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.441178] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.441356] pnp: PnP ACPI: found 9 devices
[ 0.441359] ACPI: ACPI bus type pnp unregistered
[ 0.449759] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.449766] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.449771] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
[ 0.449786] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 08] add_size 1000
[ 0.449791] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000
[ 0.449807] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x001fffff] to [bus 20] add_size 400000
[ 0.449828] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.449833] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.449837] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.449841] pci 0000:00:1c.5: res[14]=[mem 0x00100000-0x001fffff] get_res_add_size add_size 400000
[ 0.449845] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.449849] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.449858] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
[ 0.449864] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.449869] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.449874] pci 0000:00:1c.5: BAR 14: assigned [mem 0xc0600000-0xc0afffff]
[ 0.449880] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.449885] pci 0000:00:1c.1: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.449890] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0b00000-0xc0b000ff 64bit]
[ 0.449908] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.449913] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.449922] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff]
[ 0.449929] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.449939] pci 0000:00:1c.1: PCI bridge to [bus 08]
[ 0.449944] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.449953] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.449960] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.449971] pci 0000:20:00.0: BAR 6: assigned [mem 0xf0920000-0xf093ffff pref]
[ 0.449975] pci 0000:00:1c.5: PCI bridge to [bus 20]
[ 0.449980] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.449989] pci 0000:00:1c.5: bridge window [mem 0xc0600000-0xc0afffff]
[ 0.449996] pci 0000:00:1c.5: bridge window [mem 0xf0900000-0xf09fffff 64bit pref]
[ 0.450021] pci 0000:00:1e.0: PCI bridge to [bus 26]
[ 0.450083] pci 0000:00:1e.0: setting latency timer to 64
[ 0.450089] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.450093] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.450097] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.450101] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.450105] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.450108] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.450112] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.450116] pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc01fffff]
[ 0.450120] pci_bus 0000:02: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.450124] pci_bus 0000:08: resource 0 [io 0x4000-0x4fff]
[ 0.450127] pci_bus 0000:08: resource 1 [mem 0xf0500000-0xf05fffff]
[ 0.450131] pci_bus 0000:08: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.450135] pci_bus 0000:20: resource 0 [io 0x2000-0x2fff]
[ 0.450139] pci_bus 0000:20: resource 1 [mem 0xc0600000-0xc0afffff]
[ 0.450142] pci_bus 0000:20: resource 2 [mem 0xf0900000-0xf09fffff 64bit pref]
[ 0.450146] pci_bus 0000:26: resource 4 [io 0x0000-0x0cf7]
[ 0.450150] pci_bus 0000:26: resource 5 [io 0x0d00-0xffff]
[ 0.450154] pci_bus 0000:26: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.450157] pci_bus 0000:26: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.450161] pci_bus 0000:26: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.450165] pci_bus 0000:26: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.450219] NET: Registered protocol family 2
[ 0.451401] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.456144] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.456812] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.456888] TCP: reno registered
[ 0.456903] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.456958] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.457123] NET: Registered protocol family 1
[ 0.457150] pci 0000:00:02.0: Boot video device
[ 0.457669] PCI: CLS 64 bytes, default 64
[ 0.457746] Unpacking initramfs...
[ 0.626300] Freeing initrd memory: 4636k freed
[ 0.628543] Simple Boot Flag at 0x3e set to 0x1
[ 0.629045] audit: initializing netlink socket (disabled)
[ 0.629069] type=2000 audit(1354288244.626:1): initialized
[ 0.648430] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.651510] VFS: Disk quotas dquot_6.5.2
[ 0.651590] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.651831] msgmni has been set to 5759
[ 0.652156] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.652204] io scheduler noop registered
[ 0.652208] io scheduler deadline registered
[ 0.652301] io scheduler cfq registered (default)
[ 0.652518] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.652689] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.652857] pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
[ 0.653107] intel_idle: does not run on family 6 model 23
[ 0.653156] GHES: HEST is not enabled!
[ 0.653245] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.653953] Linux agpgart interface v0.103
[ 0.654073] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.669080] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.669133] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.669294] mousedev: PS/2 mouse device common for all mice
[ 0.670409] rtc_cmos 00:05: RTC can wake from S4
[ 0.670599] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.670636] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.670648] cpuidle: using governor ladder
[ 0.670651] cpuidle: using governor menu
[ 0.670829] drop_monitor: Initializing network drop monitor service
[ 0.670946] TCP: cubic registered
[ 0.671122] NET: Registered protocol family 10
[ 0.671359] NET: Registered protocol family 17
[ 0.671373] Key type dns_resolver registered
[ 0.671720] PM: Hibernation image not present or could not be loaded.
[ 0.671743] registered taskstats version 1
[ 0.672782] rtc_cmos 00:05: setting system clock to 2012-11-30 15:10:45 UTC (1354288245)
[ 0.674872] Freeing unused kernel memory: 772k freed
[ 0.675168] Write protecting the kernel read-only data: 8192k
[ 0.682434] Freeing unused kernel memory: 1408k freed
[ 0.683107] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.685881] Freeing unused kernel memory: 568k freed
[ 0.698116] systemd-udevd[43]: starting version 195
[ 0.701918] SCSI subsystem initialized
[ 0.703991] ACPI: bus type scsi registered
[ 0.704082] libata version 3.00 loaded.
[ 0.705773] ahci 0000:00:1f.2: version 3.0
[ 0.705858] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 0.705949] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 0.705955] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc sxs
[ 0.705962] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.708617] scsi0 : ahci
[ 0.709413] scsi1 : ahci
[ 0.709823] scsi2 : ahci
[ 0.710229] scsi3 : ahci
[ 0.710359] ata1: SATA max UDMA/133 abar m2048@0xf0804000 port 0xf0804100 irq 43
[ 0.710365] ata2: SATA max UDMA/133 abar m2048@0xf0804000 port 0xf0804180 irq 43
[ 0.710367] ata3: DUMMY
[ 0.710370] ata4: DUMMY
[ 1.196712] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.196745] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.198401] ata1.00: ATA-8: WDC WD3200BEKT-75F3T0, 11.01A11, max UDMA/133
[ 1.198405] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.200123] ata1.00: configured for UDMA/133
[ 1.200301] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEKT-7 11.0 PQ: 0 ANSI: 5
[ 1.201956] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.202042] sd 0:0:0:0: [sda] Write Protect is off
[ 1.202047] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.202083] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.213584] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-U633F, D500, max UDMA/100
[ 1.213590] ata2.00: applying bridge limits
[ 1.229911] ata2.00: configured for UDMA/100
[ 1.232328] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-U633F D500 PQ: 0 ANSI: 5
[ 1.270602] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[ 1.271452] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.273864] ACPI: bus type usb registered
[ 1.273912] usbcore: registered new interface driver usbfs
[ 1.273946] usbcore: registered new interface driver hub
[ 1.273996] usbcore: registered new device driver usb
[ 1.274813] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.274869] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.274876] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.274891] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.278814] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.278826] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 1.278852] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf0804800
[ 1.279113] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.279117] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.280054] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.286696] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.286950] hub 1-0:1.0: USB hub found
[ 1.286958] hub 1-0:1.0: 6 ports detected
[ 1.287158] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.287164] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.287174] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.291082] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.291093] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.291118] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0804c00
[ 1.300028] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.300266] hub 2-0:1.0: USB hub found
[ 1.300273] hub 2-0:1.0: 6 ports detected
[ 1.301086] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.301130] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.301135] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.301145] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.301191] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[ 1.301506] hub 3-0:1.0: USB hub found
[ 1.301513] hub 3-0:1.0: 2 ports detected
[ 1.301640] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.301645] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.301654] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.301701] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[ 1.301997] hub 4-0:1.0: USB hub found
[ 1.302004] hub 4-0:1.0: 2 ports detected
[ 1.302158] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.302164] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.302198] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.302230] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001860
[ 1.302434] hub 5-0:1.0: USB hub found
[ 1.302441] hub 5-0:1.0: 2 ports detected
[ 1.302557] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.302562] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.302572] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.302603] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
[ 1.302824] hub 6-0:1.0: USB hub found
[ 1.302833] hub 6-0:1.0: 2 ports detected
[ 1.303165] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.303171] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.303186] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.303219] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0
[ 1.303759] hub 7-0:1.0: USB hub found
[ 1.303766] hub 7-0:1.0: 2 ports detected
[ 1.303897] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.303903] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.303995] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.304040] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
[ 1.304881] hub 8-0:1.0: USB hub found
[ 1.304888] hub 8-0:1.0: 2 ports detected
[ 1.323613] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 1.330105] [drm] Initialized drm 1.1.0 20060810
[ 1.331660] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 1.331843] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.333755] agpgart-intel 0000:00:00.0: detected 131072K stolen memory
[ 1.333940] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.334797] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 1.334889] ACPI: Lid Switch [LID0]
[ 1.335079] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 1.335086] ACPI: Power Button [PWRB]
[ 1.335191] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.335196] ACPI: Power Button [PWRF]
[ 1.341526] i915 0000:00:02.0: setting latency timer to 64
[ 1.414990] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 1.415006] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.415008] [drm] Driver supports precise vblank timestamp query.
[ 1.415071] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.606699] usb 2-4: new high-speed USB device number 2 using ehci_hcd
[ 1.630029] tsc: Refined TSC clocksource calibration: 1296.749 MHz
[ 1.630036] Switching to clocksource tsc
[ 2.030864] fbcon: inteldrmfb (fb0) is primary device
[ 2.090024] usb 2-5: new high-speed USB device number 3 using ehci_hcd
[ 2.574662] Console: switching to colour frame buffer device 170x48
[ 2.579271] fb0: inteldrmfb frame buffer device
[ 2.579273] drm: registered panic notifier
[ 2.680113] acpi device:07: registered as cooling_device0
[ 2.780104] acpi device:08: registered as cooling_device1
[ 2.780177] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.780313] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input4
[ 2.780358] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.963907] device-mapper: uevent: version 1.0.3
[ 2.964084] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: [email protected]
[ 3.763615] atkbd serio0: Unknown key pressed (translated set 2, code 0x8e on isa0060/serio0).
[ 3.763622] atkbd serio0: Use 'setkeycodes e00e <keycode>' to make it known.
[ 9.679599] XFS (dm-0): Mounting Filesystem
[ 9.807350] XFS (dm-0): Ending clean mount
[ 10.447920] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
[ 10.481565] systemd[1]: systemd 196 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; arch)
[ 10.507375] systemd[1]: Set hostname to <xxx-laptop>.
[ 11.844864] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
[ 11.845276] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 11.845371] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 11.845393] systemd[1]: Starting Login Prompts.
[ 11.845414] systemd[1]: Reached target Login Prompts.
[ 11.845429] systemd[1]: Starting Arch Daemons.
[ 11.845447] systemd[1]: Reached target Arch Daemons.
[ 11.845462] systemd[1]: Starting Remote File Systems.
[ 11.845481] systemd[1]: Reached target Remote File Systems.
[ 11.845496] systemd[1]: Starting Syslog Socket.
[ 11.845558] systemd[1]: Listening on Syslog Socket.
[ 11.845576] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 11.845615] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 11.845630] systemd[1]: Starting Delayed Shutdown Socket.
[ 11.845668] systemd[1]: Listening on Delayed Shutdown Socket.
[ 11.845766] systemd[1]: Starting udev Kernel Socket.
[ 11.845804] systemd[1]: Listening on udev Kernel Socket.
[ 11.845885] systemd[1]: Starting udev Control Socket.
[ 11.845927] systemd[1]: Listening on udev Control Socket.
[ 11.845979] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 11.846139] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 11.846157] systemd[1]: Expecting device dev-mapper-home.device...
[ 11.846175] systemd[1]: Expecting device dev-sda8.device...
[ 11.846193] systemd[1]: Expecting device dev-mapper-swap.device...
[ 11.846210] systemd[1]: Expecting device dev-sda6.device...
[ 11.846232] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 11.846291] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 11.846308] systemd[1]: Expecting device dev-disk-by\x2duuid-f19efb1f\x2d9a5b\x2d4f22\x2db35d\x2d4a603145a436.device...
[ 11.846328] systemd[1]: Expecting device dev-disk-by\x2duuid-bd984744\x2d036e\x2d47e5\x2db40f\x2d04fa9f6d0f35.device...
[ 11.846347] systemd[1]: Expecting device dev-disk-by\x2duuid-f1bab4e5\x2de736\x2d443a\x2d827e\x2d59f202a548ab.device...
[ 11.846368] systemd[1]: Starting Journal Socket.
[ 11.846439] systemd[1]: Listening on Journal Socket.
[ 11.846467] systemd[1]: Started File System Check on Root Device.
[ 11.846485] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 11.850382] systemd[1]: Mounting Temporary Directory...
[ 11.998839] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. (To see the over-mounted files, please manually mount the underlying file system to a secondary location.)
[ 12.026864] systemd[1]: Mounting Huge Pages File System...
[ 12.040270] systemd[1]: Mounting POSIX Message Queue File System...
[ 12.043518] systemd[1]: Starting udev Coldplug all Devices...
[ 12.156149] systemd[1]: Starting Load Kernel Modules...
[ 12.173525] systemd[1]: Mounting Debug File System...
[ 12.186770] systemd[1]: Starting Setup Virtual Console...
[ 12.484840] systemd[1]: Starting Apply Kernel Variables...
[ 12.616915] systemd[1]: Starting Set Up Additional Binary Formats...
[ 12.630266] systemd[1]: Starting udev Kernel Device Manager...
[ 12.636850] systemd[1]: Starting Journal Service...
[ 12.646587] systemd[1]: Started Journal Service.
[ 12.646650] systemd[1]: Starting Syslog.
[ 12.646684] systemd[1]: Reached target Syslog.
[ 12.647637] systemd[1]: Started Remount Root and Kernel File Systems.
[ 12.647816] systemd[1]: Mounted Temporary Directory.
[ 12.647972] systemd[1]: Mounted Huge Pages File System.
[ 12.648127] systemd[1]: Mounted POSIX Message Queue File System.
[ 12.653654] systemd[1]: Mounted Debug File System.
[ 12.653705] systemd[1]: Starting Local File Systems (Pre).
[ 12.653726] systemd[1]: Reached target Local File Systems (Pre).
[ 12.653749] systemd[1]: Starting Load Random Seed...
[ 12.705203] FS-Cache: Loaded
[ 12.740616] RPC: Registered named UNIX socket transport module.
[ 12.740621] RPC: Registered udp transport module.
[ 12.740624] RPC: Registered tcp transport module.
[ 12.740626] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 12.881473] systemd-udevd[162]: starting version 196
[ 12.988696] FS-Cache: Netfs 'nfs' registered for caching
[ 13.298794] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 13.299212] r8169 0000:20:00.0: irq 45 for MSI/MSI-X
[ 13.299501] r8169 0000:20:00.0: eth0: RTL8168d/8111d at 0xffffc9000060e000, 00:26:b9:ca:52:29, XID 081000c0 IRQ 45
[ 13.299506] r8169 0000:20:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 13.401185] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 13.802403] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 14.148667] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 14.148733] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 14.208405] cfg80211: Calling CRDA to update world regulatory domain
[ 14.318480] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
[ 14.330974] lib80211: common routines for IEEE802.11 drivers
[ 14.330979] lib80211_crypt: registered algorithm 'NULL'
[ 14.375031] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 14.649332] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28
[ 14.656959] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
[ 14.660799] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28
[ 14.668564] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 14.709327] ACPI: Requesting acpi_cpufreq
[ 14.714946] Monitor-Mwait will be used to enter C-1 state
[ 14.714973] Monitor-Mwait will be used to enter C-2 state
[ 14.714989] Monitor-Mwait will be used to enter C-3 state
[ 14.715001] tsc: Marking TSC unstable due to TSC halts in idle
[ 14.715031] ACPI: acpi_idle registered with cpuidle
[ 14.720557] Switching to clocksource hpet
[ 14.757813] wmi: Mapper loaded
[ 15.215288] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120711/utaddress-251)
[ 15.215300] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.215306] ACPI Warning: 0x0000000000001180-0x00000000000011bf SystemIO conflicts with Region \GPIO 1 (20120711/utaddress-251)
[ 15.215313] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.215315] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 15.303785] ACPI: Battery Slot [BAT1] (battery present)
[ 15.405750] input: Dell WMI hotkeys as /devices/virtual/input/input8
[ 15.417769] iTCO_vendor_support: vendor-support=0
[ 15.430131] ACPI: AC Adapter [ACAD] (off-line)
[ 15.471845] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 15.471895] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0460)
[ 15.472076] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 15.585541] wl: module license 'Mixed/Proprietary' taints kernel.
[ 15.585549] Disabling lock debugging due to kernel taint
[ 15.625424] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.0, id: 0x1a0b1, caps: 0xd04711/0xa00000/0x20000, board id: 3655, fw id: 528343
[ 15.629342] INFO @wl_cfg80211_attach : Registered CFG80211 phy
[ 15.654093] lib80211_crypt: registered algorithm 'TKIP'
[ 15.654584] eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.100.82.112
[ 15.693893] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[ 15.816131] ACPI Warning: 0x0000000000001c00-0x0000000000001c1f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120711/utaddress-251)
[ 15.816143] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.108446] Linux media interface: v0.10
[ 16.120558] Linux video capture interface: v2.00
[ 16.169228] usbcore: registered new interface driver uas
[ 16.281166] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_1.3M (0c45:6415)
[ 16.316308] Initializing USB Mass Storage driver...
[ 16.316609] usbcore: registered new interface driver usb-storage
[ 16.316613] USB Mass Storage support registered.
[ 16.328744] input: Laptop_Integrated_Webcam_1.3M as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input10
[ 16.328873] usbcore: registered new interface driver uvcvideo
[ 16.328876] USB Video Class driver (1.1.1)
[ 16.779720] usb 2-4: USB disconnect, device number 2
[ 16.783629] scsi4 : usb-storage 2-4:1.0
[ 16.783773] usbcore: registered new interface driver ums-realtek
[ 17.381988] EXT4-fs (sda5): mounting ext3 file system using the ext4 subsystem
[ 17.393596] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 21.567415] Adding 977880k swap on /dev/mapper/swap. Priority:-1 extents:1 across:977880k
[ 21.656824] XFS (dm-1): Mounting Filesystem
[ 21.839619] XFS (dm-1): Ending clean mount
[ 21.940898] systemd-journald[163]: Received SIGUSR1
[ 28.055735] r8169 0000:20:00.0: eth0: link down
[ 28.055792] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 28.875645] Bluetooth: Core ver 2.16
[ 28.875677] NET: Registered protocol family 31
[ 28.875680] Bluetooth: HCI device and connection manager initialized
[ 28.875684] Bluetooth: HCI socket layer initialized
[ 28.875687] Bluetooth: L2CAP socket layer initialized
[ 28.875695] Bluetooth: SCO socket layer initialized
[ 29.041069] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 37.807702] fuse init (API version 7.20)
[ 37.828734] EXT4-fs (sda5): re-mounted. Opts: commit=600
lsmod
Module Size Used by
fuse 69173 2
michael_mic 2074 8
arc4 2039 4
ecb 2105 0
bnep 8857 2
bluetooth 192120 7 bnep
snd_seq 50881 1
snd_seq_device 5268 1 snd_seq
ums_realtek 7391 0
usb_storage 47384 1 ums_realtek
uvcvideo 72787 0
videobuf2_vmalloc 2468 1 uvcvideo
uas 11119 0
videobuf2_memops 2246 1 videobuf2_vmalloc
videobuf2_core 24030 1 uvcvideo
videodev 100859 2 uvcvideo,videobuf2_core
media 10405 2 uvcvideo,videodev
i2c_i801 9571 0
joydev 9991 0
coretemp 6070 0
kvm_intel 124749 0
lib80211_crypt_tkip 7738 0
wl 2558087 0
kvm 373917 1 kvm_intel
iTCO_wdt 5255 0
iTCO_vendor_support 1929 1 iTCO_wdt
dell_wmi 1485 0
acpi_cpufreq 5933 1
lpc_ich 10609 0
ac 2536 0
mperf 1267 1 acpi_cpufreq
sparse_keymap 3056 1 dell_wmi
battery 6773 0
wmi 8379 1 dell_wmi
dell_laptop 8787 0
processor 26855 3 acpi_cpufreq
evdev 10266 12
psmouse 71909 0
serio_raw 4689 0
dcdbas 5520 1 dell_laptop
lib80211 3949 2 wl,lib80211_crypt_tkip
microcode 12377 0
cfg80211 177108 1 wl
rfkill 15604 5 cfg80211,bluetooth
snd_hda_codec_hdmi 24487 1
snd_hda_codec_realtek 61193 1
snd_hda_intel 26180 3
snd_hda_codec 98033 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep 6428 1 snd_hda_codec
snd_pcm_oss 38992 0
snd_pcm 75689 5 snd_pcm_oss,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 7217 2 snd_pcm,snd_hda_intel
snd_timer 18934 3 snd_pcm,snd_seq
snd_mixer_oss 15347 1 snd_pcm_oss
snd 60188 16 snd_hda_codec_realtek,snd_pcm_oss,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_mixer_oss
soundcore 5442 1 snd
pcspkr 1899 0
r8169 56839 0
mii 4091 1 r8169
nfs 127007 0
lockd 64904 1 nfs
sunrpc 186092 2 nfs,lockd
fscache 40995 1 nfs
ablk_helper 1972 0
cryptd 8741 1 ablk_helper
aes_x86_64 7508 6
aes_generic 26138 1 aes_x86_64
xts 3101 3
gf128mul 6050 1 xts
dm_crypt 15799 3
dm_mod 72105 7 dm_crypt
i915 495521 3
video 11276 1 i915
button 4662 1 i915
i2c_algo_bit 5391 1 i915
intel_agp 10744 1 i915
intel_gtt 15659 3 i915,intel_agp
drm_kms_helper 32877 1 i915
drm 218852 4 i915,drm_kms_helper
i2c_core 20707 6 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,videodev
vfat 10119 0
fat 48338 1 vfat
xfs 748207 2
ext4 440434 1
crc16 1359 2 ext4,bluetooth
jbd2 78751 1 ext4
mbcache 5977 1 ext4
uhci_hcd 23436 0
ehci_hcd 41816 0
sr_mod 14823 0
usbcore 150398 6 uas,uhci_hcd,uvcvideo,ums_realtek,usb_storage,ehci_hcd
usb_common 954 1 usbcore
cdrom 35520 1 sr_mod
sd_mod 29559 5
ahci 21360 4
libahci 20023 1 ahci
libata 167683 2 ahci,libahci
scsi_mod 133386 5 uas,usb_storage,libata,sd_mod,sr_mod
lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
08:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
20:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
pacman -Q | grep ...
alsa-lib 1.0.26-1
alsa-plugins 1.0.26-1
alsa-utils 1.0.26-1
alsaplayer 0.99.81-5
lib32-alsa-lib 1.0.26-1
lib32-alsa-plugins 1.0.26-1
lib32-libpulse 2.1-1
lib32-libsndfile 1.0.25-2
libcanberra-pulse 0.30-2
libcdaudio 0.99.12-6
libpulse 2.1-1
libsndfile 1.0.25-2
portaudio 19_20111121-1
pulseaudio 2.1-1
pulseaudio-alsa 2-1
sound-juicer 3.5.0-1
sound-theme-freedesktop 0.8-1
soundtouch 1.6.0-1
teamspeak-soundpack-portal 1-4
webrtc-audio-processing 0.1-1
pactl list
Module #0
Name: module-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute state of devices"
module.version = "2.1"
Module #1
Name: module-stream-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute/device state of streams"
module.version = "2.1"
Module #2
Name: module-card-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "2.1"
Module #3
Name: module-augment-properties
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with additional static information"
module.version = "2.1"
Module #4
Name: module-udev-detect
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load matching drivers"
module.version = "2.1"
Module #5
Name: module-jackdbus-detect
Argument:
Usage counter: n/a
Properties:
module.author = "David Henningsson"
module.descriptI set the loglevel to debug and rebooted.
grep -i pulse /var/log/everything.log
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
Dec 3 00:06:34 localhost rtkit-daemon[442]: Successfully made thread 713 of process 713 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] core-util.c: RealtimeKit worked.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] core-util.c: Successfully gained nice level -11.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: This is PulseAudio 2.1
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Compilation host: x86_64-unknown-linux-gnu
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wall -W -Wextra -Wno-long-long -Wvla -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Running on host: Linux x86_64 3.6.8-1-ARCH #1 SMP PREEMPT Mon Nov 26 22:10:40 CET 2012
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Found 2 CPUs.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Page size is 4096 bytes
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Compiled with Valgrind support: no
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Running in valgrind mode: no
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Running in VM: no
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Optimized build: yes
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Machine ID is 883cea362d03be37758a39f4000006db.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Using runtime directory /home/whatever/.pulse/883cea362d03be37758a39f4000006db-runtime.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Using state directory /home/whatever/.pulse.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-2.1/modules.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Running in system mode: no
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] memblock.c: Using shared memory pool with 1024 slots of size 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is 65472
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] database-tdb.c: Opened TDB database '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-device-volumes.tdb'
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-device-volumes'.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] database-tdb.c: Opened TDB database '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-stream-volumes.tdb'
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-stream-volumes'.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1 added for object /org/pulseaudio/stream_restore1
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry0
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry1
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry2
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry3
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry4
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry5
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] database-tdb.c: Opened TDB database '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-card-database.tdb'
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-card-database'.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-udev-detect.so': success
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-udev-detect.c: /devices/pci0000:00/0000:00:1b.0/sound/card0 is busy: yes
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-udev-detect.c: Found 1 cards.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #4; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-jackdbus-detect.so': success
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] dbus-util.c: Successfully connected to D-Bus session bus f8aad50a9c72259e812fef8050bbed02 as :1.11
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-jackdbus-detect.c: jackdbus isn't running.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-jackdbus-detect" (index: #5; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-bluetooth-discover.so': success
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] dbus-util.c: Successfully connected to D-Bus system bus aca7467032ad6386c1a812c250bbecf9 as :1.27
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] bluetooth-util.c: dbus: interface=org.freedesktop.DBus, path=/org/freedesktop/DBus, member=NameAcquired
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-bluetooth-discover" (index: #6; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-esound-protocol-unix.so': success
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-esound-protocol-unix" (index: #7; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #8; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-gconf.so': success
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-gconf" (index: #9; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-default-device-restore.c: Saved default sink 'auto_null' not existent, not restoring default sink setting.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-default-device-restore.c: Saved default source 'auto_null.monitor' not existent, not restoring default source setting.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-default-device-restore" (index: #10; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-rescue-streams" (index: #11; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-always-sink.c: Autoloading null-sink as no other sinks detected.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Restoring volume for sink auto_null.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] sink.c: Created sink 0 "auto_null" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] sink.c: device.description = "Dummy Output"
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] sink.c: device.class = "abstract"
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] sink.c: device.icon_name = "audio-card"
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] source.c: Created source 0 "auto_null.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] source.c: device.description = "Monitor of Dummy Output"
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] source.c: device.class = "monitor"
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] source.c: device.icon_name = "audio-input-microphone"
Dec 3 01:06:35 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Thread starting up
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Could not set format on sink auto_null
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-null-sink" (index: #12; argument: "sink_name=auto_null sink_properties='device.description="Dummy Output"'").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-always-sink" (index: #13; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-intended-roles" (index: #14; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-suspend-on-idle" (index: #15; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-console-kit.so': success
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-console-kit" (index: #16; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-systemd-login.so': success
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] client.c: Created 0 "Login Session 1"
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-systemd-login.c: Added new session 1
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-systemd-login" (index: #17; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-position-event-sounds" (index: #18; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-role-cork.c: Using role 'phone' as trigger role.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-role-cork.c: Using roles 'music' and 'video' as cork roles.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-role-cork" (index: #19; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-filter-heuristics" (index: #20; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-filter-apply" (index: #21; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-dbus-protocol.so': success
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Memstats added for object /org/pulseaudio/core1/memstats
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Device added for object /org/pulseaudio/core1/sink0
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Sink added for object /org/pulseaudio/core1/sink0
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Device added for object /org/pulseaudio/core1/source0
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Source added for object /org/pulseaudio/core1/source0
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module0
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module1
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module2
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module3
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module4
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module5
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module6
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module7
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module8
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module9
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module10
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module11
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module12
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module13
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module14
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module15
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module16
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module17
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module18
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module19
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module20
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module21
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client0
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1 added for object /org/pulseaudio/core1
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-dbus-protocol" (index: #22; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #23; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] main.c: Got org.PulseAudio1!
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] main.c: Got org.pulseaudio.Server!
Dec 3 01:06:35 localhost pulseaudio[710]: [pulseaudio] main.c: Daemon startup successful.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] main.c: Daemon startup complete.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module22
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module23
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] client.c: Created 1 "Native client (UNIX socket client)"
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client1
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for gnome-settings-daemon
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] client.c: Created 2 "Native client (UNIX socket client)"
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client2
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for gnome-shell
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Found /usr/share/applications/gnome-shell.desktop.
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] client.c: Created 3 "Native client (UNIX socket client)"
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client3
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for canberra-gtk-play
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] client.c: Freed 3 "canberra-gtk-play"
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Connection died.
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client removed from object /org/pulseaudio/core1/client3
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
Dec 3 00:06:38 localhost rtkit-daemon[442]: Successfully made thread 745 of process 745 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] core-util.c: RealtimeKit worked.
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] core-util.c: Successfully gained nice level -11.
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: This is PulseAudio 2.1
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Compilation host: x86_64-unknown-linux-gnu
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wall -W -Wextra -Wno-long-long -Wvla -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Running on host: Linux x86_64 3.6.8-1-ARCH #1 SMP PREEMPT Mon Nov 26 22:10:40 CET 2012
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Found 2 CPUs.
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Page size is 4096 bytes
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Compiled with Valgrind support: no
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Running in valgrind mode: no
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Running in VM: no
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Optimized build: yes
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Machine ID is 883cea362d03be37758a39f4000006db.
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Using runtime directory /home/whatever/.pulse/883cea362d03be37758a39f4000006db-runtime.
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Using state directory /home/whatever/.pulse.
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-2.1/modules.
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Running in system mode: no
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] pid.c: Daemon already running.
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] client.c: Created 4 "Native client (UNIX socket client)"
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client4
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for pactl
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-x11-publish" (index: #24; argument: "display=:0").
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module24
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] client.c: Freed 4 "pactl"
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Connection died.
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client removed from object /org/pulseaudio/core1/client4
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] client.c: Created 5 "Native client (UNIX socket client)"
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client5
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for pactl
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] module-x11-xsmp.c: Connected to session manager 'gnome-session' as '102459fa9aeb823737135449319899169800000005480030'.
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] client.c: Created 6 "XSMP Session on gnome-session as 102459fa9aeb823737135449319899169800000005480030"
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-x11-xsmp" (index: #25; argument: "display=:0 session_manager=local/whatever-laptop:@/tmp/.ICE-unix/548,unix/whatever-laptop:/tmp/.ICE-unix/548").
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client6
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module25
Dec 3 01:06:39 localhost pulseaudio[713]: [pulseaudio] client.c: Freed 5 "pactl"
Dec 3 01:06:39 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Connection died.
Dec 3 01:06:39 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client removed from object /org/pulseaudio/core1/client5
Dec 3 01:06:40 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null idle for too long, suspending ...
Dec 3 01:06:40 localhost pulseaudio[713]: [pulseaudio] sink.c: Suspend cause of sink auto_null is 0x0004, suspending
Dec 3 01:06:40 localhost pulseaudio[713]: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
Dec 3 01:06:52 localhost pulseaudio[713]: [pulseaudio] client.c: Created 7 "Native client (UNIX socket client)"
Dec 3 01:06:52 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client7
Dec 3 01:06:54 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
Dec 3 01:06:54 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
Dec 3 01:06:54 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
Dec 3 01:06:54 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
Dec 3 01:06:54 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for gnome-shell
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink auto_null.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:auto_null:null.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-stream-restore.c: Restoring device for stream sink-input-by-media-role:event.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-intended-roles.c: Not setting device for stream audio-volume-change, because already set.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink.c: Suspend cause of sink auto_null is 0x0000, resuming
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes busy.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: Created input 0 "audio-volume-change" on auto_null with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: event.id = "audio-volume-change"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.role = "event"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.name = "audio-volume-change"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.filename = "/usr/share//sounds/freedesktop/stereo/audio-volume-change.oga"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.name = "GNOME Shell"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: native-protocol.version = "26"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.id = "org.gnome.Shell"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.id = "717"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.user = "whatever"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.host = "whatever-laptop"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.binary = "gnome-shell"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.language = "en_US.utf8"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: window.x11.display = ":0"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.machine_id = "883cea362d03be37758a39f4000006db"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-media-role:event"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Requested tlength=2000.00 ms, minreq=20.00 ms
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Traditional mode enabled, modifying sink usec only for compat with minreq.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Requested latency=1960.00 ms, Received latency=1960.00 ms
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=352800, base=4, prebuf=349276, minreq=3528 maxrewind=0
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=352800, base=4, prebuf=349276, minreq=3528 maxrewind=0
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Final latency 3960.00 ms = 1960.00 ms + 2*20.00 ms + 1960.00 ms
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Stream added for object /org/pulseaudio/core1/playback_stream0
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] protocol-native.c: Requesting rewind due to end of underrun.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Requested to rewind 345744 bytes.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink.c: Processing rewind...
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink-input.c: Have to rewind 345744 bytes on render memblockq.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] source.c: Processing rewind...
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Rewound 345744 bytes.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] protocol-native.c: Underrun on 'audio-volume-change', 0 bytes in queue.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink auto_null.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Requested to rewind 345744 bytes.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink.c: Processing rewind...
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink-input.c: Have to rewind 345744 bytes on render memblockq.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] source.c: Processing rewind...
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Rewound 345744 bytes.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:auto_null:null.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Requested to rewind 352800 bytes.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink.c: Processing rewind...
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] source.c: Processing rewind...
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Rewound 54188 bytes.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Stream removed from object /org/pulseaudio/core1/playback_stream0
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: Freeing input 0 "audio-volume-change"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-stream-restore.c: Restoring device for stream sink-input-by-media-role:event.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-intended-roles.c: Not setting device for stream audio-volume-change, because already set.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes busy.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: Created input 1 "audio-volume-change" on auto_null with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: event.id = "audio-volume-change"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.role = "event"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.name = "audio-volume-change"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.filename = "/usr/share//sounds/freedesktop/stereo/audio-volume-change.oga"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.name = "GNOME Shell"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: native-protocol.version = "26"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.id = "org.gnome.Shell"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.id = "717"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.user = "whatever"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.host = "whatever-laptop"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.binary = "gnome-shell"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.language = "en_US.utf8"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: window.x11.display = ":0"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.machine_id = "883cea362d03be37758a39f4000006db"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-media-role:event"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Requested tlength=2000.00 ms, minreq=20.00 ms
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Traditional mode enabled, modifying sink usec only for compat with minreq.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Requested latency=1960.00 ms, Received latency=1960.00 ms
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=352800, base=4, prebuf=349276, minreq=3528 maxrewind=0
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=352800, base=4, prebuf=349276, minreq=3528 maxrewind=0
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Final latency 3960.00 ms = 1960.00 ms + 2*20.00 ms + 1960.00 ms
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Stream added for object /org/pulseaudio/core1/playback_stream1
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] protocol-native.c: Requesting rewind due to end of underrun.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Requested to rewind 345744 bytes.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink.c: Processing rewind...
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink-input.c: Have to rewind 345744 bytes on render memblockq.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] source.c: Processing rewind...
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Rewound 345744 bytes.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] protocol-native.c: Underrun on 'audio-volume-change', 0 bytes in queue.
Dec 3 01:08:21 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Requested to rewind 352800 bytes.
Dec 3 01:08:21 localhost pulseaudio[713]: [null-sink] sink.c: Processing rewind...
Dec 3 01:08:21 localhost pulseaudio[713]: [null-sink] source.c: Processing rewind...
Dec 3 01:08:21 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Rewound 352800 bytes.
Dec 3 01:08:21 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
Dec 3 01:08:21 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
Dec 3 01:08:21 localhost pulseaudio[713]: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
Dec 3 01:08:21 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Stream removed from object /org/pulseaudio/core1/playback_stream1
Dec 3 01:08:21 localhost pulseaudio[713]: [pulseaudio] sink-input.c: Freeing input 1 "audio-volume-change"
Dec 3 01:08:26 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null idle for too long, suspending ...
Dec 3 01:08:26 localhost pulseaudio[713]: [pulseaudio] sink.c: Suspend cause of sink auto_null is 0x0004, suspending
Dec 3 01:08:26 localhost pulseaudio[713]: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
Dec 3 01:08:28 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Synced.
By now I also made my system not load any moudules which have oss in their name. Didn't help either.
Maybe you are looking for
-
(SOLVED) avant-window-navigator errors
When i try to load avant or try to start the dock preferences i get this error: [unilx@online ~]$ avant-window-navigator Screen is composited ** (avant-window-navigator:2496): DEBUG: Updating gtk theme colours ** (avant-window-navigator:2496): DEBUG:
-
Eclipse MS-7520 - Unable to boot windows if Dimm slot A1 is used
I am unable to boot into or install windows XP, Vista (32 and 64 bit) or Windows 7 Beta if I have any memory installed in Slot A1 - it freezes at the windows loading screen (the little green bar gets about 1/3 way across). I am able to press F8 to br
-
Problem with gui_download when using DBF FILE type.
Good Day Experts. I am trying to download excel file using function module GUI_DOWNLOAD. declared a table it_string type table string. initially I appending my header to it_string. and then passing my internal table to it . this is how I am pass
-
Applying a transition to multiple clips, titles, and stills
Hello, I'm banging my head against the wall trying to achieve something that seems like it should be fairly simple. I'm producing guitar instruction videos that often use still images, five or more title clips (for text highlighting concepts presente
-
ITunes Plus videos "merged" in cover flow?
I recently upgraded 3 videos from the same band, and now in cover flow there's just one thumbnail for all three, and instead of any of the song titles it says "Unknown Album". This seems to just be a problem here - other bands I've got multiple video