Sound and audio device

hey i just format my Compaq C707TU laptop and its sound and audio driver not working, please suggest me for proper driver to install in my laptop.

Hi,
For XP:
Before Conexant Universal Audio Architecture (UAA) here
Conexant High Definition Audio Drivers here
This will create a swsetup folder in c drive ("C:\swsetup\sp34200")
Installing Audio drivers may result in an error. But continue with the following steps to get the audio driver installed correctly.
Open the Device Manager:
1. Click on Start and select Run. Now type devmgmt.msc and press enter.
2. Right click on "Audio device on High Definition Audio Bus" and click Update driver.
3. Select "Install from a list or specific location"
4. Click Next. Then select "Don't search, I will choose the driver to install"
5. Click Next and then select "Sound, video and game controller" from the list.
6. Click Next and then click Have Disk.
7. Click Browse C:\swsetup\sp34200 folder and select the .inf (wis30b2a) file and click open and Continue with the onscreen instructions.
Similarly install Modem Drivers:
Conexant HDAUDIO Soft Data Fax Modem with SmartCP here
1.Right click on "Modem device on High Definition Audio Bus" and click Update driver.
2. Select "Install from a list or specific location"
3. Click Next. Then select "Don't search, I will choose the driver to install"
4. Click Next and then select "Modem" from the list.
5. Click Next and then click Have Disk.
6. Click Browse C:\swsetup\sp33890 folder and select the .inf (wis30b2b) file and click open and Continue with the onscreen instructions. 
For Vista:
Conexant High-Definition Audio here
Conexant HDAUDIO Soft Data Fax Modem with SmartCP here
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Similar Messages

  • Satellite P30-145: Don't have an audio device in 'Sounds and Audio devices'

    Hi guys,
    I've only just fixed one problem with the help of one fantastic member but now I have another!
    All of a sudden my speakers decide not to work!! I checked the volume etc and alll was fine but when I went in control panel>sounds and audio devices it says I don't have an audio device!!!
    It worked fine this morning and I havn't done anything that could have done this.
    These problems I'm having are all spontaneous, I don't know what's going on!
    Does anyone know how I can fix this and does anyone suspect virus activity? (I have done a scan which said I don't have any)
    I use a P30-145
    Many thanks

    Hi
    Did you check the device manager?? Is the sound card listed properly in the device manager or some yellow exclamation marks appear?
    Did you try to reinstall the sound driver? If not, please try it.
    Of course I would also recommend to update the anti virus applications and to scan the system for virus and malware

  • Camera microphone dose not appeer at Sounds and audio devices properties

    My webcam vista pro disappeered from the list of voice recording hardware in the Sounds and audio devices properties. I alradytried uninstall and reinstall, and it didn't work. how can I make my computer to recognize it's

    There is no built-in microphone for Vista Plus either. The current selling webcam model that has built-in microphone is Live! Cam Optia AF and Live! Cam Voice. You can also use this comparison chart to see which webcam has built-in microphone.
    http://www.creative.com/products/com...lect.asp?cat=4
    Jason

  • Audigy , Sound and Audio Devices Properties 'No Audio Device' appears

    <p class="MsoNormal">Out of the blue, in the Sound and Audio Devices Properties, on the Volume tab ?No Audio Device? appears.
    On the Sound tab of Sound and Audio Devices Properties, my Default Device says ?Modem # Line play back and is my only drop down choice. I made no configuration changes or installed any new software, it just stopped working.
    I have searched for solutions, to no avail. I have an ?!? next to the Microsoft Kernel Audio Mixer in Device Manager that upon re-install displays a message that there was a problem installing this hardware(MEDIA) I/O operation has been aborted because of either a threadd exit or an application request(both installing from driver folder and recovery CD).
    I don?t particularly care what sound device I have, just one that works again. I?ve uninstalled the sound devices and let them re-install on reboot and have checked the BIO settings (I don?t have any sound related settings there).
    In Admin Tools > Services ?Windows Audio? is started and set to Automatic. When I manually try to play a windows sound in the Sounds tab I get an error message that says my sound card may be in use.
    Under Sound and Audio Devices in Device Manager I currently have(when I ?Show Hidden?):
    -Audio codecs
    -Legacy Audio Drivers
    -Legacy Video Capture Devices
    -Media Control Devices
    -Video codecs
    Don't know what else to try. Any help would be appreciated.

    cesario85 wrote:
    OK The sticky label says SB0240
    Here's the screenshot:
    [img"]http://www.strikeforceguild.com/temp-images/IRQs.gif" width="640" height="45[/img]
    I have since tried putting in a different sound card (another soundblaster, I think a 28 model) and installed its drivers but had the same problems. Im having a go at using the onboard sound though, just to see.Message Edited by cesario85 on 09--2005 06:57 PM
    Audigy shares IRQ with IDE controller and firewire controller. This is not good.
    NOTE: I suppose you're running your PC on "Standard PC" -mode (since IRQ's >5 not showing). If so, you can try to assign IRQ for the PCI slot, Audigy is installed, manually from BIOS. See your motherboard manual page 4-26.
    Can you check if your PC is running as "Standard PC" and not as "ACPI Uniprocessor PC" (Device Manager --> Computer). Make it "ACPI Uniprocessor PC" --> you get more IRQs (virtual) in use.
    NOTE: You may need to reinstall OS to get this done.
    Also you may need to enable APIC mode on BIOS.
    How To:
    A) Go to 'Device Manager' a short cut to get there is "Right Click" on the My computer Icon on your desktop (Control Panel --> System --> Hardware),
    B) Next click on 'Computer', then double click on 'Standard PC'. Then select 'Driver' and then 'Update Driver'.
    C) At this point you will see a screen pop up asking you to do this "Automatically" or Select 'Display a list of the known drivers for this device', - Choose this option.
    D) Next you will see - 'Show all hardware of this device class'. Now you can select "ACPI Uniprocessor PC" in the list shown in the window to the right.
    E) Now Windows needs/will re-start and re-install all hardware/ settings needed to run in this configuration.
    .jtpMessage Edited by jutapa on 09--2005 0:23 PM

  • No sound and audio device not working properly, T61 vista

    I unistalled the audio device SoundMax integrated HD audio because I had problems getting the mic of my new webcam (Logitech pro 9000) to work. But after reinstalling the SoundMax audio driver the audio device is no longer working.
    Installing the SoundMax driver doesn't report any problems and the device manger also says that the SoundMax integrated digital hd audio device is working properly. But the speaker icon on the taskbar is crossed out. When hovering the mouse over the speaker icon it says Volume: 0 SoundMax integrated digital hd audio. When opening the Volume Mixer it says "No audio decivice is installed"...
    I've completly removed all drivers and reinstalling several times but I cannot get it to work so I really need some help now.
    All software + drivers regarging the webcam has been completly removed.
    System data:
    T61, Vista business
    Audio chip seems to be a Analog Devices 1984
    SoundMax driver version 6.10.1.5510 (latest available from lenovo)

    Really silly bug, but there are times with the T series laptops, specifically the T61s that seem to not project the sound through the speakers and the way to fix it is to just keep hitting the silver volume buttons up by your power button on the actual laptop.  This may or may not work for you, but I literally just got done with this on a T61 running a fresh installation of XP.  The buttons on the lenovo itself control the direct signal input and do a very poor job with integrating with Windows Vista and XP.
    Let me know if that works for you.

  • Tried the solution 'Sound and Audio Devices Properties Audio tab Default device' no sound!

    Still no sound, everything greyed out and still saying bo sound device installed and it seems no sound card either

    Really silly bug, but there are times with the T series laptops, specifically the T61s that seem to not project the sound through the speakers and the way to fix it is to just keep hitting the silver volume buttons up by your power button on the actual laptop.  This may or may not work for you, but I literally just got done with this on a T61 running a fresh installation of XP.  The buttons on the lenovo itself control the direct signal input and do a very poor job with integrating with Windows Vista and XP.
    Let me know if that works for you.

  • Problems with sound drivers - audio device on high definition audio bus

    i turned on my computer one day and the sound was gone. no "speaker" icon in the lower right-hand corner of the screen; no choices available via the "control panel: sounds and audio devices" icon. when i went to device manager, i saw "audio device on high definition audio bus" had a yellow exclamation mark. i saw some sites suggested downloading the realtek high definition audio, but that didn't seem to work -- and now i don't see the audio device on high definition audio line either.
    any ideas? from what i've read, i gather this is a somewhat common problem but no solid way to fix this. i know something similar has happened to me a year ago but i was able to fix it somehow.
    Solved!
    Go to Solution.

    Hello,
    Have you tried installing the latest audio device drivers for your ThinkPad?  If so, did that solve the problem?
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • Sound and audio does not show up in device manager hp pavillion dv6500

    No audio output device installed. Sound and audio not listed under device manager hp pavillion dv6500 system bios f.2a-02/22/2008

    Hi @Cynthia0 
    I understand that you have no audio device showing up in device manager.  I am happy to help you with this.
    Please post the full product number for your notebook. See the following, if you need help with that information.
    How Do I Find My Model Number or Product Number?
    Once I have that, I can find the proper driver and support page for you.
    For now check through this page: Resolving No Sound or Audio Problems (Windows Vista)
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Lost Sound / No Audio Device

    I have a k7n415 Pro Board using on-board audio.  Updated NVIDIA drivers on Windows Update Site, then lost all sound.  Tried rolling back driver and still no sound.  Device  (NVIDIA NFORCE MCP Audio Processing Unit and Audio Codec Interface) shows in control panel/system/hardward with no conflicts.  However, sound and audio system devices in control panel says "no audio devices."  
    I also tried to go back a day using Windows Restore point, but got a message that Windows could not restore back to that point.
    I'm stumped.  Does anyone have any suggestions?
    Thanks!

    I reinstalled drivers from disk that came with computer, but can still only connect at reduced speed settings.
    MotherBoard: MSI k7n415 Pro (MS6373)
    Award Bios 6.00 PG
    CPU: AMD XP2200+
    768MB DDR Ram
    Power supply:  Antec True Power 430 Watts
    Video:  NVIDIA GeForce4 Ti 4600
    Storage Devices:  Maxtor 6L080J4 (80 GB)
                               Maxtor 6Y160P0 (160 GB)
                               Maxtor 5 T040H4 SCSI Disk Drive (40 GB)
                               Maxtor 6 Y2500P0 SCSI Disk Drive (250 GB)
    Plextor DVDR PX-708A
    NVIDIA nForce MCP Networking Adapter
    Windows XP Home 5.01.2600 Service Pack 2

  • No sound and audio on Satellite A10-S177

    My laptop is a Satellite A10-S177 XP, I happened to delete some programmes from my laptop in order to create space but it so happened that it affected my audio and sound and currently they the sound and audio bit in the control panel say no sound/audio driver. Tried to down load some software from the net but it did not work for it required printer access which I dont have.
    I also dont have my XP installation CD, so am all lost and could do with any help from computer geniuses out there.
    Thank you
    Caroline

    Hi there,
    First of all would you tell me where did you downloaded some software where you thought it would bring back your sound?
    Since your machine is from america you would have to go to the american driver download site:
    http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp
    Please visit the link Ive posted and download the sound driver. Install it and check if the sound works.
    In case of any question just feel free and ask...
    Greetings

  • My sounds and audio is not working. it's not in mute. help please

    i need help. my sounds and audio is not working. but it's not in mute button.

    Hi,
    Can you post back with the following details.
    1.  The full Model No. and Product No. of your notebook - see Here for a guide on locating this information.
    2.  The full version of the operating system you are using ( ie Windows 7 64bit ).
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • How to open sounds and audio properties using Labview function

    Hi All,
    How to open the sounds and audio properties of the control panel using the Labview system exe vi.
    Is there any dll also to open this property.
    If there is dll which is that and how to program the dll to serve my purpose.
    Solved!
    Go to Solution.

    Have you looked at the "Graphics and Sounds" section within the Functions Palette (Block Diagram)? There are VI's that already exist for this.
    R
    Message Edited by JoeLabView on 09-04-2008 07:44 AM
    Attachments:
    sounds.PNG ‏12 KB

  • Sound and audio not working

    Sound and audio system of my laptop hp pavalion 2000 is not working.
    please help

    Hi there @vandan31-sle_ 
    Welcome to the HP Support Forums!
    I understand that you are having trouble with your sound. Please post the full product number and OS version that applies to your notebook. Also you can read the following documents if you need help in finding those.
    How Do I Find My Model Number or Product Number?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    For now you can try one of these and see if it helps.
    No Sound from the Speakers (Windows 7)
    No Sound from the Speakers (Windows 8)
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Install pc sound and Audio

    hi i actually lost ma sound and Audio drive please help me
    thanks

    Hi,
    Check Cheryl and Rakhmad XP general guide which You may find here.
    In first part You will find answer on Your question.
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • My computer has lost its sound and audio? how can i get it ?

    My laptop has lost its sound and audio. I dont know how to fix it. help me please.

    It's not lost. It's never there. FaceTime icon is only present in ipad and ipod touch. You can use FaceTime right of Messages. check this link out : http://iphone-and-i.blogspot.com/2012/01/how-to-activate-facetime-in-iphone-4s.h tml

Maybe you are looking for